scholarly journals MODIFICATION OF PURUN TIKUS (ELEOCHARIS DULCIS) AS A NATURAL FIBER COMPOSITE USING KMnO4 AND NaOH

2021 ◽  
Vol 6 (1) ◽  
pp. 37-48
Author(s):  
Ninis Hadi Haryanti ◽  
Suryajaya Suryajaya ◽  
Lies Banowati ◽  
Mawaddatur Rahmah ◽  
Akhmad Safi'i
Keyword(s):  
Tensile Strength ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Natural Fibers ◽  
Chemical Properties ◽  
Alkaline Treatment ◽  
Elemental Content ◽  
Physical Density ◽  
Before And After ◽  
Mechanical Tensile

The choice of natural fibers as a composite reinforcing material is related to the advantages of being cheap, abundant, renewable, and environmentally friendly. This research was conducted to study the effect of de-lignification treatment on the properties of purun tikus (Eleocharis Dulcis) fiber. Purun tikus fiber has been modified with the alkaline treatment of KMnO4 2% and NaOH 5%. This treatment was mainly applied to improve the physical and chemical properties of purun tikus fiber. Changes in chemical characteristics (water, lignin, cellulose, and hemicellulose), physical (density), mechanical (tensile strength), morphology, and elemental content of purun tikus before and after treated with alkaline were studied. The measurements showed an increase in water content and density while lignin, cellulose, and hemicellulose were decreased. Thus the alkaline treatment of KMnO4 2% and NaOH 5% reduced lignin, cellulose, and hemicellulose of the purun tikus fiber to reduce the size of the fibers, as shown in SEM measurements. There was a change in elemental content after being treated with KMnO4 2% and NaOH 5%. NaOH treatment was better than KMnO4 treatment in terms of removing lignin and hemicellulose in purun tikus fiber. Although the tensile strength of the purun fibers treated with KMnO4 2% and NaOH 5% were lower than untreated, with less lignin, cellulose, and hemicellulose, it is expected that these fibers will blend better in the composite and improved its mechanical properties.

Fabrication and Testing of Abaca Fibre Reinforced Epoxy Composites for Automotive Applications

2013 ◽  
Vol 718-720 ◽  
pp. 63-68 ◽  
Author(s):  
Raja R. Niranjan ◽  
S. Junaid Kokan ◽  
R. Sathya Narayanan ◽  
S. Rajesh ◽  
V.M. Manickavasagam ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Natural Fiber ◽  
Fibre Composite ◽  
Fiber Composite ◽  
Salt Water ◽  
Natural Fibers ◽  
Natural Fibre ◽  
Industrial Applications ◽  
Vertical Orientation ◽  
The Matrix

The natural fibre composite materials are nowadays playing a vital role in replacing the conventional and synthetic materials for industrial applications. This paper proposes a natural fiber composite made of Abaca fibre as reinforcing agent with Epoxy resin as the matrix, manufactured using Hand Lay-up method. Glass Fiber Reinforced Plastics (woven rovings) are used to improve the surface finish and impart more strength and stiffness to natural fibers. In this work, the fibers are arranged in alternative layers of abaca in horizontal and vertical orientation. The mechanical properties of the composite are determined by testing the samples for tensile and flexural strength. It is observed that the tensile strength of the composite material is dependent on the strength of the natural fiber and also on the interfacial adhesion between the reinforcement and the matrix. The composite is developed for automobile dashboard/mudguard application. It may also be extended to biomedical, electronics and sports goods manufacturing. It can also be used in marine products due to excellent resistance of abaca to salt water damage since the tensile strength when it is wet.

Tensile and Statistical Analysis of Sisal Fibers for Natural Fiber Composite Manufacture

2015 ◽  
Vol 1115 ◽  
pp. 349-352 ◽  
Author(s):  
Md. Masudur R. Abir ◽  
S.M. Kashif ◽  
Md. Abdur Razzak
Keyword(s):  
Tensile Strength ◽  
Statistical Analysis ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Natural Fibers ◽  
Young Modulus ◽  
Gage Length ◽  
Sisal Fiber ◽  
Natural Fiber Composite ◽  
Sisal Fibers

To achieve sustainability in the composite industry, natural fibers must be able to replace synthetic fibers .In this work the tensile properties of sisal fibers were determined. The relationships between tensile strength, young modulus, failure to strain and gage length was studied. Also variation in tensile strength was quantified using statistical analysis. The relationship between Weibull statistics and gage length were also investigated. The strength of the sisal fiber obtained in this work was between 255-377 MPA and decreased with an increase in gage length. The Weibull modulus obtained was similar for all gage lengths and was around 2.5.

Tensile Strength of Banana – Bamboo – Glass Fiber Reinforced Natural Fiber Composites

2014 ◽  
Vol 592-594 ◽  
pp. 1195-1199
Author(s):  
Ashwin Sailesh ◽  
C. Shanjeevi ◽  
J.Jeswin Arputhabalan
Keyword(s):  
Tensile Strength ◽  
Glass Fiber ◽  
Fiber Orientation ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Natural Fiber Composites ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced

The developments in the field of composite materials are growing tremendously day by day. One such development is the use of natural fibers as reinforcement in the composite material. This is attributed to the fact that natural fibers are environmental friendly, economical, easily available and non-abrasive. Mixing of natural fiber with Glass Fibers is finding increased applications. In this present investigation Banana – Bamboo – Glass fiber reinforced natural fiber composites is fabricated by Hand – Layup technique with varying fiber orientation such as [0°G, 90°BM, 0°BN, 0°G], [0°G, 0°BM, +45°BN, 0°G] and [0°G, 0°BM, 90°BN, 0°G] and are tested for its tensile strength. The tensile strength of the fabricated composites is evaluated. The results indicated that the natural fiber composite with the fiber orientation of [0°G, 0°BM, 90°BN, 0°G] can withstand more load when compared to the samples with other fiber orientation. Nomenclature Used: BN – Banana fiber BM – Bamboo fiber G – Glass fiber

scholarly journals EFFECTS OF NaOH MODIFICATION ON THE MECHANICAL PROPERTIES OF BAOBAB POD FIBER REINFORCED LDPE COMPOSITES

2016 ◽  
Vol 36 (1) ◽  
pp. 87-95
Author(s):  
U Shehu ◽  
MT Isa ◽  
BO Aderemi ◽  
TK Bello
Keyword(s):  
Tensile Strength ◽  
Water Absorption ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Natural Fibers ◽  
Hydraulic Press ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Fiber Reinforced ◽  
Elongation At Break

In order to improve properties of natural fibers as reinforcement, different treatment methods have being adopted by researchers. However, the use of sodium hydroxide (NaOH) for the treatment of baobab pod fiber as reinforcement in low density polyethylene is sparsely reported. Therefore, this study, investigated the effect of 2 wt%, 4 wt% 6 wt%, 8 wt% and 10 wt%  concentration of NaOH on baobab pod fibers as reinforcement for low density polyethylene (LDPE). Two roll mill machine and hydraulic press at a pressure of 10 kN and temperature of 120oC aided the production of the composite. FT-IR was used to analyze the functional groups of the treated and un-treated fibers. The result showed the disappearance of the peak 1550 cm-1 corresponding to lignin after modification. Further, the composites were characterized for the following tensile strength (TS), modulus of elasticity (MOE), elongation at break, impact strength and water absorption. Preliminary studies on the effect of loading of the unmodified baobab fiber in the LDPE matrix showed desirable properties at 10 wt%, where fiber content was in the range of 5 wt% to 30 wt% at interval of 5 wt%. The composite produced from the 8 wt% NaOH modified fiber had the highest tensile strength, MOE, elongation at break. At this modification level, the tensile strength, MOE and elongation at break were about 75.48%, 92.18% and 28% respectively higher than the composite produced from unmodified fiber. Composite produced with 10 wt% NaOH modified fiber exhibited least water absorption of 1.80%, which was 50% lower than unmodified. These showed that the modification of the fiber improved the composite properties. These properties compared favorably with some reported properties for natural fiber reinforced polymer composites. http://dx.doi.org/10.4314/njt.v36i1.12

scholarly journals Characterization of a new natural fiber extracted from Corypha taliera fruit

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Taslima Ahmed Tamanna ◽  
Shah Alimuzzaman Belal ◽  
Mohammad Abul Hasan Shibly ◽  
Ayub Nabi Khan
Keyword(s):  
Tensile Strength ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Morphological Characteristics ◽  
Synthetic Fiber ◽  
X Ray Diffraction ◽  
Reinforced Composite ◽  
Potential Alternative

AbstractThis study deals with the determination of new natural fibers extracted from the Corypha taliera fruit (CTF) and its characteristics were reported for the potential alternative of harmful synthetic fiber. The physical, chemical, mechanical, thermal, and morphological characteristics were investigated for CTF fibers. X-ray diffraction and chemical composition characterization ensured a higher amount of cellulose (55.1 wt%) content and crystallinity (62.5%) in the CTF fiber. The FTIR analysis ensured the different functional groups of cellulose, hemicellulose, and lignin present in the fiber. The Scherrer’s equation was used to determine crystallite size 1.45 nm. The mean diameter, specific density, and linear density of the CTF fiber were found (average) 131 μm, 0.86 g/cc, and 43 Tex, respectively. The maximum tensile strength was obtained 53.55 MPa for GL 20 mm and Young’s modulus 572.21 MPa for GL 30 mm. The required energy at break was recorded during the tensile strength experiment from the tensile strength tester and the average values for GL 20 mm and GL 30 mm are 0.05381 J and 0.08968 J, respectively. The thermal analysis ensured the thermal sustainability of CTF fiber up to 230 °C. Entirely the aforementioned outcomes ensured that the new CTF fiber is the expected reinforcement to the fiber-reinforced composite materials.

Cotton-Epoxy Composites: Development and Mechanical Characterization

2011 ◽  
Vol 471-472 ◽  
pp. 291-296 ◽  
Author(s):  
Piyush P. Gohil ◽  
A.A. Shaikh
Keyword(s):  
Natural Fiber ◽  
Volume Fraction ◽  
Fiber Composite ◽  
Natural Fibers ◽  
High Strength ◽  
Data Availability ◽  
Sem Images ◽  
Feasible Range ◽  
Set Up ◽  
Natural Fiber Composite

Composites are becoming essential part of today’s material because they offer advantages such as low weight, corrosion resistance, high fatigue strength; faster assembly etc. composites are generating curiosity and interest all over the worlds. The attempts can be found in literature for composite materials high strength fiber and also natural fiber like jute, flax and sisal natural fibers provides data but there is need of experimental data availability for unidirectional natural fiber composite with seldom natural fiber like cotton, palm leaf etc., it can provide a feasible range of alternative materials to suitable conventional material. It was decided to carry out the systematic experimental study for the effect of volume fraction of reinforcement on longitudinal strength as well as Modulus of Elasticity (MOE) using developed mould-punch set up and testing aids. The testing is carried out as per ASTM D3039/3039M-08. The comparative assessment of obtained experimental results with literature is also carried out, which forms an important constituent of present work. It is also observed through SEM images and theoretical investigations that interface/interphase plays and important role in natural fiber composite.

scholarly journals SIFAT MEKANIS SERAT ENCENG GONDOK SEBAGAI MATERIAL KOMPOSIT SERAT ALAM YANG BIODEGRADABLE

2018 ◽  
Vol 2 (1) ◽  
Author(s):  
Sri Hastuti ◽  
Catur Pramono ◽  
Yafi Akhmad
Keyword(s):  
Immersion Time ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Natural Fibers ◽  
Ethanol Solution ◽  
Machining Process ◽  
Single Fiber ◽  
Glass Fiber Composite ◽  
Treatment Type ◽  
Eichornia Crassipes

The Eichornia crassipes fiber have potentially as a composite reinforcing material. The advantage of composites with natural fibers like to light weight, corrosion resistance, water resistance, attractive performance, and without machining process. The purpose of using natural fiber as an alternative material to replace glass fiber composite material with Eichornia crassipes fibers are friendly and cheap. The research material used Eichornia crassipes fiber, NaOH, Etanol, and H2O. Processing of Eichornia crassipes fiber is washing with water, natural drying ± 10 days in eviromental, fiber taking with steel brush. Dry fibre were subjected to 10%, 20%, 30% NaOH and ethanol solution with variations of immersion time of 2, 4, 6 hours, neutralization with H20, and drying at room temperature. The Single fiber tensile test specimens were made with variations of treatment type in NaOH and Ethanol solution (10%, 20%, 30%), immersion time of 2, 4, and 6 hours. Single fiber test specimens refer to standard ASTM D 3379. Optimum tensile strength test results on NaOH treatment 20% variation of immersion time 4 hours: 28.402 N / mm2 and on ethanol treatment 20% variation of immersion time 2 hours: 48.197 N / mm2.

scholarly journals Karakterisasi Mekanik Komposit Matriks Polipropilena High Impact Dengan Serat Alam Acak Dengan Metode Hand Lay Up Untuk Komponen Automotive

2020 ◽  
Vol 3 (3) ◽  
Author(s):  
Alfan Ekajati Latief ◽  
Nuha Desi Anggraeni ◽  
Dedy Hernady
Keyword(s):  
Tensile Strength ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Natural Fibers ◽  
Mesh Size ◽  
High Impact ◽  
Hemp Fiber ◽  
Polypropylene Matrix ◽  
The Impact ◽  
Pineapple Leaves

ABSTRAK Serat alam yang berfungsi sebagai penguat memiliki sifat yang lebih ringan, mudah dibentuk, tahan korosi, harga murah dan memiliki kekuatan yang sama dengan material logam. Serat bahan alami yang memiliki kekuatan tarik, tekan dan impak yang baik diantaranya serat rami dan daun nanas. Untuk matriks Polipropilena high impact (PPHI) yang banyak digunakan dalam industri otomotif.. Pada penelitian ini dipelajari pengaruh fraksi volume serat alami terhadap sifat mekanik komposit PPHI berpenguat serat alami. Komposit PPHI dibuat dengan menggunakan metode Hand Lay Up pada temperatur 2500C dengan fraksi volume serat alami sebesar 10%, dimana serat dibuat digunting halus hingga memiliki ukuran mesh 120/170, 170/200 dan dibawah 200 mesh, Kekuatan tarik komposit diukur dengan mengacu pada standar ASTM 3039, kekuatan tekan diukur mengacu pada ASTM D 695. Harga Impak dari komposit diukur dengan mengacu pada ASTM D 6110-04. Pada penelitian ini dapat disimpulkan, fraksi volume 10 % serat alami yang baik ketika dicampur dengan matriks polipropilena high impact adalah serat nanas dengan meshing 170/200 dapat meningkatkan kekuatan tarik PPHI sebesar 40 % dan meningkatkan harga impak PPHI sebesar 50,8 % jika dilihat penelitan sebelumnya yakni menggunakan serat rami dibawah mesh 1200 dengan matriks PPHI. Kata Kunci: Rami, Daun Nanas, Polipropilena High Impact, Hand Lay Up. ABSTRACT Natural fibers that function as reinforcement have lighter properties, are easily formed, are corrosion resistant, are cheap and have the same strength as metal materials. Natural fiber which has good tensile, compressive and impact strength including Ramie and pineapple leaves. For high impact polypropylene matrix (PPHI) which is widely used in the automotive industry. In this study the effect of volume fraction of natural fibers on the mechanical properties of PPHI composites with natural fiber reinforced properties was studied. PPHI composites are made using the Hand Lay Up method at a temperature of 2500C with a volume fraction of natural fibers of 10%, where fibers are made finely shaved to have a mesh size of 120/170, 170/200 and below 200 mesh, the tensile strength of the composite is measured by reference to the standard ASTM 3039, compressive strength measured refers to ASTM D 695. The impact price of the composite is measured with reference to ASTM D 6110-04. In this study it can be concluded, a good volume fraction of 10% natural fiber when mixed with high impact polypropylene matrix is pineapple fiber with meshing 170/200 can increase the tensile strength of PPHI by 40% and increase the impact price of PPHI by 50.8% if seen by research previously that used hemp fiber under mesh 1200 with PPHI matrix. Keywords: Ramie Pineapple, High Impact Polypropylene, Hand Lay Up.

Bacterial cellulose-natural fiber composites produced by fibers extracted from banana peel waste

2020 ◽  
pp. 152808372092584
Author(s):  
Muhammad Awais Naeem ◽  
Qasim Siddiqui ◽  
Muhammad Rafique Khan ◽  
Muhammad Mushtaq ◽  
Muhammad Wasim ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Bacterial Cellulose ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Banana Peel ◽  
Gravimetric Analysis ◽  
Natural Fiber Composites ◽  
Banana Fibers

In recent times, there is a growing demand for low-cost raw materials, renewable resources, and eco-friendly end products. Natural fibers are considered as strong candidates to be used as a potential reinforcement for composite manufacturing. In the current study, natural fibers extracted from banana peel were coated with bacterial cellulose through a green biosynthesis approach as well as by a simple slurry dipping method. Thus, natural fibers from banana peel waste were used the first time, to produce bacterial cellulose-natural fiber composites. SEM analysis revealed good interaction between the hybrid fibers and the epoxy matrix. Thermal gravimetric analysis results revealed that the degradation temperature increases because of the addition of bacterial cellulose on fiber surface, which improves the thermal stability. The maximum thermal decomposition temperature (405°C) was noticed for nanocomposites reinforced by banana fibers with bacterial cellulose deposited on their surface. Whereas the lowest weight loss was also found for the same sample group. The highest tensile strength (57.95 MPa) was found for SBC-BP/epoxy, followed by DBC-BP/epoxy (54.73 MPa) and NBP/epoxy (45.32 MPa) composites, respectively. Composites reinforced by both types of hybrid banana fibers shown comparatively higher tensile performance as compared with the neat banana peel fiber-epoxy composites, which can be attributed to the high strength and stiffness associated with the bacterial cellulose. Overall, this study suggests a successful and green route for the fabrication of natural fiber-reinforced composites with improved properties such as tensile strength and thermal stability.

scholarly journals Effect of Graphene Oxide Coating on Natural Fiber Composite for Multilayered Ballistic Armor

Polymers ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1356 ◽  
Author(s):  
Ulisses Oliveira Costa ◽  
Lucio Fabio Cassiano Nascimento ◽  
Julianna Magalhães Garcia ◽  
Sergio Neves Monteiro ◽  
Fernanda Santos da Luz ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Natural Fibers ◽  
Oxide Coating ◽  
Synthetic Fibers ◽  
Comparable Performance ◽  
Strong Candidate ◽  
Natural Fiber Composite ◽  
Curauá Fiber

Composites with sustainable natural fibers are currently experiencing remarkably diversified applications, including in engineering industries, owing to their lower cost and density as well as ease in processing. Among the natural fibers, the fiber extracted from the leaves of the Amazonian curaua plant (Ananas erectifolius) is a promising strong candidate to replace synthetic fibers, such as aramid (Kevlar™), in multilayered armor system (MAS) intended for ballistic protection against level III high velocity ammunition. Another remarkable material, the graphene oxide is attracting considerable attention for its properties, especially as coating to improve the interfacial adhesion in polymer composites. Thus, the present work investigates the performance of graphene oxide coated curaua fiber (GOCF) reinforced epoxy composite, as a front ceramic MAS second layer in ballistic test against level III 7.62 mm ammunition. Not only GOCF composite with 30 vol% fibers attended the standard ballistic requirement with 27.4 ± 0.3 mm of indentation comparable performance to Kevlar™ 24 ± 7 mm with same thickness, but also remained intact, which was not the case of non-coated curaua fiber similar composite. Mechanisms of ceramic fragments capture, curaua fibrils separation, curaua fiber pullout, composite delamination, curaua fiber braking, and epoxy matrix rupture were for the first time discussed as a favorable combination in a MAS second layer to effectively dissipate the projectile impact energy.

Sign in / Sign up

Export Citation Format

Share Document