scholarly journals Sifat Dasar Kayu Ganitri (Elaeocarpus sphaericus (Gaertn.) K. Schum.) dari Sukabumi dan Potensi Penggunaannya

2020 ◽  
Vol 14 (1) ◽  
pp. 109
Author(s):  
Esti Prihatini ◽  
Akhrudin Maddu ◽  
Istie Sekartinging Rahayu ◽  
Mersi Kurniati
Keyword(s):  
Construction Material ◽  
Raw Material ◽  
Lightweight Construction ◽  
Basic Properties ◽  
Panel Products ◽  
Interlocked Grain ◽  
Wood Strength ◽  
Potential Use ◽  
Alcohol Benzene

Ganitri (Elaeocarpus sphaericus (Gaertn.) K. Schum.) adalah pohon cepat tumbuh yang banyak ditemukan di Sukabumi. Kayu ini tumbuh di hampir semua wilayah Indonesia. Tulisan ini menyajikan hasil pengujian sifat dasar (struktur anatomi, kimia, sifat fisis dan mekanis) kayu ganitri yang diambil dari hutan rakyat di daerah Sukabumi. Tujuan penelitian adalah untuk mengetahui potensi penggunan kayu ganitri berdasarkan sifat dasar dan penggunaan kayu oleh masyarakat sekitar. Hasil penelitian menunjukkan bahwa kayu ganitri memiliki kayu teras berwarna kuning dan kayu gubal berwarna putih. Corak kayu polos dan tekstur halus. Arah serat lurus sampai berpadu, kayu lunak, tidak mengkilap, dan tidak berbau. Berdasarkan nilai dimensi serat dan nilai turunannya, kayu ganitri termasuk ke dalam Kelas Mutu II. Kayu ganitri memiliki kadar holoselulosa dan selulosa yang tinggi (70,70% dan 54,58%), kadar sedang untuk lignin 21,60%, ekstraktif alkohol-benzena 3,47%, dan kadar abu 0,81%. Dengan berat jenis (BJ) kering udara 0,35 kayu ganitri termasuk ke dalam Kelas Kuat IV. Kayu tersebut disarankan untuk digunakan sebagai bahan bangunan konstruksi ringan, perkakas, furnitur, kayu lapis, papan sambung dan produk panel. Basic Properties of Ganitri Wood (Elaeocarpus sphaericus (Gaertn.) K. Schum from Sukabumi and Its Potential UsesAbsractGanitri (Elaeocarpus sphaericus (Gaertn.) K. Schum.) is a fastgrowing tree that is widely found in Sukabumi, West Java. It grows in all part of Indonesia. A research was carried out to investigate basic properties (anatomical, physical, mechanical, and chemical) of ganitri wood from the community forest of Sukabumi. The purpose of this study was to determine the potential use of ganitri wood based on its basic properties and local utilization. The results showed that the color of ganitri sapwood was white , and it was not clearly demarcated from the yellow, with fewer figure patterns. The texture was fine with straight to interlocked grain. The wood was soft, not lustrous, and no special odor. Based on the fibre dimensions and derivative values, the quality of ganitri wood fell in Class II as a raw material for pulp and paper. Ganitri had high holocellulose and cellulose levels (70.70% and 54.58%), moderate level in lignin (21.60%), and it contained 3.47% extractive soluble in alcohol-benzene, and 0.81% ash. Based on its air dry specific gravity (0,35), ganitri wood could be classified into wood Strength Class IV. The potential uses of ganitri are for lightweight construction material, tools, furniture, plywood, connecting boards, and other panel products.

Investigational Studies on Quantity of Salinity in Netravati River Estuary Sand-Coastal Karnataka

2018 ◽  
Vol 6 (6) ◽  
pp. 46
Author(s):  
Raveesha P ◽  
K. E. Prakash ◽  
B. T. Suresh Babu
Keyword(s):  
Brackish Water ◽  
Sea Water ◽  
Salt Water ◽  
Construction Material ◽  
Salt Content ◽  
River Estuary ◽  
Sand Sample ◽  
River Sand ◽  
Natural Aggregates

The salt water mixes with fresh water and forms brackish water. The brackish water contains some quantity of salt, but not equal to sea water. Salinity determines the geographic distribution of the number of marshes found in estuary. Hence salinity is a very important environmental factor in estuary system. Sand is one major natural aggregate, required in construction industry mainly for the manufacture of concrete. The availability of good river sand is reduced due to salinity. The quality of sand available from estuarine regions is adversely affected due to this reason. It is the responsibility of engineers to check the quality of sand and its strength parameters before using it for any construction purpose. Presence of salt content in natural aggregates or manufactured aggregates is the cause for corrosion in steel. In this study the amount of salinity present in estuary sand was determined. Three different methods were used to determine the salinity in different seasonal variations. The sand sample collected nearer to the sea was found to be high in salinity in all methods.  It can be concluded that care should be taken before we use estuary sand as a construction material due to the presence of salinity.

PENGARUH STRATEGI PEMBELAJARAN DAN MINAT BELAJAR TERHADAP HASIL BELAJAR KONSTRUKSI POLA PADA SISWA SMK NEGERI 8 MEDAN

2012 ◽  
Vol 18 (3) ◽  
pp. 121
Author(s):  
Surniati Chalid
Keyword(s):  
Secondary Education ◽  
Learning Outcomes ◽  
Learning Strategies ◽  
Construction Material ◽  
Quality Of Education ◽  
Vocational Schools ◽  
Educational Facilities ◽  
Quality Of Learning

Vocational schools (SMK) is a secondary education that preparesstudents primarily for working on a particular field. Diverse efforts made by SMKgraduates increased 8 Medan include improving the quality of education byreforming both the substance of the material and the provision of facilities andinfrastructure. However, the results have not been up, cermatan can be seen fromthe low competence of graduates, making it less able to play a role in meeting thedemands of the workplace. Assumed to be an indication of the quality of learning isstill performed during less effective, less efficient and unable to increase studentinterest. In order to achieve maximum learning outcomes is through theimprovement of learning strategies to utilize the educational facilities in accordancewith existing conditions, ie, by examining one of the subjects namely Constructiondressmaking pattern. Construction material pattern done with learning strategyapproach manipulated into two comparing results STAD cooperative learningstrategies and learning strategies expository and compare the results with thelearning characteristics of students with high and low interest in learning onlearning outcomes Pattern Construction.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

Physico-Chemical Aspects of the Influence of Raw Material Components on the Quality of Ceramic Brick

2019 ◽  
Vol 777 (12) ◽  
pp. 37-42
Author(s):  
G.Yu. SHAGIGALIN ◽  
◽  
P.A. FEDOROV ◽  
L.N. LOMAKINA ◽  
◽  
...  
Keyword(s):  
Raw Material ◽  
Ceramic Brick ◽  
Physico Chemical

scholarly journals The Impact of Post-Manufacture Treatments on the Surface Characteristics Important for Finishing of OSB and Particleboard

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 975
Author(s):  
Antonio Copak ◽  
Vlatka Jirouš-Rajković ◽  
Nikola Španić ◽  
Josip Miklečić
Keyword(s):  
Water Vapour ◽  
Oriented Strand Board ◽  
Construction Material ◽  
Surface Characteristics ◽  
Surface Treatments ◽  
Factors Affecting ◽  
Treatment Conditions ◽  
Water Vapour Absorption ◽  
The Impact

Oriented strand board (OSB) is a commonly used structural wood-based panel for walls and roof siding, but recently the industry has become interested in OSB as a substrate for indoor and outdoor furniture. Particleboard is mainly used in furniture productions and has become popular as a construction material due to its numerous usage possibilities and inexpensive cost. Moisture is one of the most important factors affecting wood-based panel performance and the post-treatment conditions affected their affinity to water. When OSB and particleboard are used as substrates for coatings, their surface characteristics play an important role in determining the quality of the final product. Furthermore, roughness can significantly affect the interfacial phenomena such as adsorption, wetting, and adhesion which may have an impact on the coating performance. In this research particleboard and OSB panels were sanded, re-pressed and IR heated and the influence of surface treatments on hardness, roughness, wetting, water, and water vapour absorption was studied. Results showed that sanding improved the wetting of particleboard and OSB with water. Moreover, studied surface treatments increased water absorption and water penetration depth of OSB panels, and re-pressing had a positive effect on reducing the water vapour absorption of particleboard and OSB panels.

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

scholarly journals Crushed Bricks: Demolition Waste as a Sustainable Raw Material for Geopolymers

2021 ◽  
Vol 13 (14) ◽  
pp. 7572
Author(s):  
Gigliola D’Angelo ◽  
Marina Fumo ◽  
Mercedes del Rio Merino ◽  
Ilaria Capasso ◽  
Assunta Campanile ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Building Materials ◽  
Mechanical Performance ◽  
Raw Materials ◽  
Construction Material ◽  
Raw Material ◽  
The European Union ◽  
Total Energy Consumption ◽  
Demolition Waste ◽  
Crushed Brick

Demolition activity plays an important role in the total energy consumption of the construction industry in the European Union. The indiscriminate use of non-renewable raw materials, energy consumption, and unsustainable design has led to a redefinition of the criteria to ensure environmental protection. This article introduces an experimental plan that determines the viability of a new type of construction material, obtained from crushed brick waste, to be introduced into the construction market. The potential of crushed brick waste as a raw material in the production of building precast products, obtained by curing a geopolymeric blend at 60 °C for 3 days, has been exploited. Geopolymers represent an important alternative in reducing emissions and energy consumption, whilst, at the same time, achieving a considerable mechanical performance. The results obtained from this study show that the geopolymers produced from crushed brick were characterized by good properties in terms of open porosity, water absorption, mechanical strength, and surface resistance values when compared to building materials produced using traditional technologies.

scholarly journals Effect of carbon anode production parameters on anode cracking

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Salah Amrani ◽  
Duygu Kocaefe ◽  
Yasar Kocaefe ◽  
Dipankar Bhattacharyay ◽  
Mohamed Bouazara ◽  
...  
Keyword(s):  
Electrical Resistivity ◽  
Crack Density ◽  
Raw Material ◽  
Carbon Anode ◽  
Know How ◽  
Production Parameters ◽  
Environmental Emissions ◽  
Carbon Anodes ◽  
Tomographic Analysis

AbstractCarbon anodes are used in the electrolytic production of aluminum. The quality of anodes is directly related to the production cost, carbon and energy consumption, and environmental emissions. It is desired that the anodes have high density, low porosity/cracks, low electrical resistivity as well as low air and CO2 reactivities. Low resistivity of anodes reduces energy required to produce aluminum during electrolysis. The presence of cracks and pores increases the anode electrical resistivity. Therefore, it is important to know how and when the pores and cracks form during the anode production so that the necessary actions could be taken to prevent their formation. A study was carried out to investigate the effect of different anode production parameters such as anode composition, type of raw material used, time and top-former bellow pressure of vibro-compactor, green anode cooling medium, and heating rate used during baking on the crack formation. The anodes are fabricated at the carbon laboratory of University of Quebec at Chicoutimi (UQAC) and characterized by measuring their properties (density, electrical resistivity, and surface crack density). The anode properties, hence the anode quality, were correlated with the anode production parameters. Also, their tomographic analysis was carried out to visualize and quantify the internal cracks. Graphical abstract

Bark characterization of a commercial Eucalyptus urophylla hybrid clone in view of its potential use as a biorefinery raw material

2021 ◽  
Author(s):  
Caroline J. Sartori ◽  
Graciene S. Mota ◽  
Fábio Akira Mori ◽  
Isabel Miranda ◽  
Teresa Quilhó ◽  
...  
Keyword(s):  
Raw Material ◽  
Hybrid Clone ◽  
Eucalyptus Urophylla ◽  
Potential Use
Sign in / Sign up

Export Citation Format

Share Document