A middle Byzantine olive press room at Aphrodisias

2001 ◽  
Vol 51 ◽  
pp. 159-168 ◽  
Author(s):  
K. Ahmet

During the 1962 excavations at Aphrodisias, a number of marble storage jars and a marble basin were discovered which were tentatively associated with wine production. The area was further excavated in 1970 when more pieces were uncovered in situ and then placed west of their original positions where they now remain (fig 1) (Erim 1970: 60, figs 44, 45).These remains have since been identified as equipment used in the production of olive oil. This article provides a record of the individual items excavated, a discussion of their original findspots, and a hypothetical reconstruction of the operation of the press, followed by a discussion of the production capacity and date of such a processing plant.

2017 ◽  
Vol 120 (3) ◽  
pp. 303-322
Author(s):  
D. Pienaar ◽  
B.M. Guy ◽  
C. Pienaar ◽  
K.S. Viljoen

Abstract Mineralogical and textural variability of ores from different sources commonly leads to processing inefficiencies, particularly when a processing plant is designed to treat ore from a single source (i.e. ore of a relatively uniform composition). The bulk of the Witwatersrand ore in the Klerksdorp goldfield, processed at the AngloGold Ashanti Great Noligwa treatment plant, is derived from the Vaal Reef (>90%), with a comparatively small contribution obtained from the Crystalkop Reef (or C-Reef). Despite the uneven contribution, it is of critical importance to ensure that the processing parameters are optimized for the treatment of both the Vaal and C-Reefs. This paper serves to document the results of a geometallurgical study of the C-Reef at the Great Noligwa gold mine in the Klerksdorp goldfield of South Africa, with the primary aim of assessing the suitability of the processing parameters that are in use at the Great Noligwa plant. The paper also draws comparisons between the C-Reef and the Vaal Reef A-facies (Vaal Reef) and attempts to explain minor differences in the recovery of gold and uranium from these two sources. Three samples of the C-Reef were collected in-situ from the underground operations at Great Noligwa mine for mineralogical analyses and metallurgical tests. Laboratory-scale leach tests for gold (cyanide) and uranium (sulphuric acid) were carried out using dissolution conditions similar to that in use at the Great Noligwa plant, followed by further diagnostic leaching in the case of gold. The gold in the ore was found to be readily leachable with recoveries ranging from 95% to 97% (as opposed to 89% to 93% for the Vaal Reef). Additional recoveries were achieved in the presence of excess cyanide (96% to 98%). The recovery of uranium varied between 72% and 76% (as opposed to 30% to 64% for the Vaal Reef), which is substantially higher than predicted, given the amount of brannerite in the ore, which is generally regarded as refractory. Thus, the higher uranium recoveries from the C-Reef imply that a proportion of the uranium was recovered by the partial dissolution of brannerite. As the Vaal Reef contain high amounts of chlorite (3% to 8%), which is an important acid consumer, it is considered likely that this could have reduced the effectiveness of the H2SO4 leach in the case of the ore of the Vaal Reef. Since the gold and uranium recoveries from the C-Reef were higher than the recoveries from the Vaal Reef, the results demonstrate that the processing parameters used for treatment of the Vaal Reef are equally suited to the treatment of the C-Reef. Moreover, small processing modifications, such as increased milling and leach retention times, may well increase the recovery of gold (particularly when e.g. coarse gold, or unexposed gold, is present).


2017 ◽  
Vol 68 (9) ◽  
pp. 2196-2203 ◽  
Author(s):  
Mara Crisan ◽  
Gheorghe Maria

Novel coupled enzymatic systems reported important applications in the industrial bio-catalysis. Multi-enzymatic reactions can successfully replace complex chemical syntheses, using milder reaction conditions, and generating less waste. For such systems acting simultaneously, the model-based engineering calculations (design, reactor operation optimization) are difficult tasks, because they must account for interacting reactions, differences in enzymes optimal activity domains and deactivation kinetics. The determination of the optimal operating mode (enzyme ratios, enzyme feeding policy, temperature, pH) often turns into a difficult multi-objective optimization problem with multiple constraints to be solved for every particular system. The paper focuses on applying a modular screening procedure that can identify the optimal operating policy of an enzymatic reactor, which minimizes the enzyme consumption, given the process kinetic model, and an imposed production capacity. Following an optimization procedure, the process effectiveness is evaluated in a systematic approach, by including simple batch reactor (BR), batch with intermittent addition of the key-enzyme following certain optimal policies (BRP). Exemplification is made for the case of the enzymatic reduction of D-fructose to mannitol by using suspended MDH (mannitol dehydrogenase) and NADH (Nicotinamide adenine dinucleotide) cofactor, with the in-situ continuous regeneration of the cofactor by the expense of formate degradation in the presence of suspended FDH (Formate dehydrogenase).


Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3874
Author(s):  
Dominika Veselinyová ◽  
Jana Mašlanková ◽  
Katarina Kalinová ◽  
Helena Mičková ◽  
Mária Mareková ◽  
...  

We are experiencing rapid progress in all types of imaging techniques used in the detection of various numbers and types of mutation. In situ hybridization (ISH) is the primary technique for the discovery of mutation agents, which are presented in a variety of cells. The ability of DNA to complementary bind is one of the main principles in every method used in ISH. From the first use of in situ techniques, scientists paid attention to the improvement of the probe design and detection, to enhance the fluorescent signal intensity and inhibition of cross-hybrid presence. This article discusses the individual types and modifications, and is focused on explaining the principles and limitations of ISH division on different types of probes. The article describes a design of probes for individual types of in situ hybridization (ISH), as well as the gradual combination of several laboratory procedures to achieve the highest possible sensitivity and to prevent undesirable events accompanying hybridization. The article also informs about applications of the methodology, in practice and in research, to detect cell to cell communication and principles of gene silencing, process of oncogenesis, and many other unknown processes taking place in organisms at the DNA/RNA level.


2016 ◽  
Vol 150 (2) ◽  
pp. 139-149 ◽  
Author(s):  
Margret Scholz ◽  
Galina Pendinen

The pairing behaviour of the individual chromosome arms of Hordeum vulgare (Hv) with their homoeologous arms of H. bulbosum (Hb) at metaphase I of meiosis in tetraploid Hb × Hv hybrids and the frequencies of recombined Hv chromosome arms in selfed offspring were studied on differentially visualized chromosomes after fluorescent in situ hybridisation. The frequencies of paired Hv-Hb arms in the F2 and F3 hybrids were correlated with the frequencies of recombined Hv chromosomes in progenies. Self-generation of hybrids, the number of Hv and Hb chromosomes, and the number of recombined Hv chromosomes of the hybrids strongly influenced the Hv-Hb pairing frequency in meiosis. Within the offspring of F2 and F3 hybrids both Hv plants and hybrids were detected. In contrast, all progenies of the F4 hybrid were hybrids which exhibited centromere misdivisions. The highest frequencies of homoeologous pairing in hybrids and most recombinants were obtained for the barley chromosome 1HL. Recombinants for 4HL, 5HS, 6HS, and 7HS were rarely found. Meiotic pairing and recombinants involving chromosome 1HS were never observed. The results of this study demonstrate that fertile tetraploid interspecific hybrids with a high intergenomic pairing at meiosis are valuable basic material for introgression breeding in barley.


2018 ◽  
Vol 22 (12) ◽  
pp. 6241-6255 ◽  
Author(s):  
Soumendra N. Bhanja ◽  
Xiaokun Zhang ◽  
Junye Wang

Abstract. Groundwater is one of the most important natural resources for economic development and environmental sustainability. In this study, we estimated groundwater storage in 11 major river basins across Alberta, Canada, using a combination of remote sensing (Gravity Recovery and Climate Experiment, GRACE), in situ surface water data, and land surface modeling estimates (GWSAsat). We applied separate calculations for unconfined and confined aquifers, for the first time, to represent their hydrogeological differences. Storage coefficients for the individual wells were incorporated to compute the monthly in situ groundwater storage (GWSAobs). The GWSAsat values from the two satellite-based products were compared with GWSAobs estimates. The estimates of GWSAsat were in good agreement with the GWSAobs in terms of pattern and magnitude (e.g., RMSE ranged from 2 to 14 cm). While comparing GWSAsat with GWSAobs, most of the statistical analyses provide mixed responses; however the Hodrick–Prescott trend analysis clearly showed a better performance of the GRACE-mascon estimate. The results showed trends of GWSAobs depletion in 5 of the 11 basins. Our results indicate that precipitation played an important role in influencing the GWSAobs variation in 4 of the 11 basins studied. A combination of rainfall and snowmelt positively influences the GWSAobs in six basins. Water budget analysis showed an availability of comparatively lower terrestrial water in 9 of the 11 basins in the study period. Historical groundwater recharge estimates indicate a reduction of groundwater recharge in eight basins during 1960–2009. The output of this study could be used to develop sustainable water withdrawal strategies in Alberta, Canada.


CORROSION ◽  
10.5006/2581 ◽  
2017 ◽  
Vol 74 (3) ◽  
pp. 312-325 ◽  
Author(s):  
Cheng Man ◽  
Chaofang Dong ◽  
Kui Xiao ◽  
Qiang Yu ◽  
Xiaogang Li

In situ atomic force microscopy, scanning Kelvin probe force microscopy, and potential pulse technology were used to study the pitting behavior induced by inclusions in AM355 martensitic stainless steel. The MnS-(Cr, Mn, Al)O duplex inclusion exhibited the highest sensitivity to the pitting corrosion with respect to the individual MnS and (Cr, Mn, Al)O inclusions. When exposed to a solution containing Cl−, the selective dissolution occurred on the sulfide segment of the duplex inclusion, leading to trenching along the oxide part. The dissolution mechanism of MnS segment in the duplex inclusion is similar to the individual MnS inclusion. The Cr depletion in the boundary layer at the inclusion/metal interface promoted the transition from metastable to stable pitting corrosion in the duplex inclusion.


2000 ◽  
Vol 195 ◽  
pp. 417-418
Author(s):  
S. Nitta

The aim of this work is to demonstrate the properties of the magnetospheric model around Kerr black holes, so-called the “flywheel” (rotation powered) model. The fly-wheel engine of the BH accretion disk system is applied to the statistics of QSOs/AGNs. Nitta, Takahashi, & Tomimatsu clarified the individual evolution of the Kerr black-hole fly-wheel engine, which is parameterized by black-hole mass, initial Kerr parameter, magnetic field near the horizon, and a dimensionless small parameter. We impose a statistical model for the initial mass function of an ensemble of black holes using the Press-Schechter formalism. With the help of additional assumptions, we can discuss the evolution of the luminosity function and the spatial number density (population) of QSOs/AGNs. The result explains well the decrease of very bright QSOs and decrease of population after z ~ 2.


2016 ◽  
Vol 37 (4Supl1) ◽  
pp. 2589
Author(s):  
Marjorrie Augusto de Souza ◽  
Edenio Detmann ◽  
Gabriel Cipriano Rocha ◽  
Marcia De Oliveira Franco ◽  
Erick Darlisson Batista ◽  
...  

The objective of this collaborative study was to evaluate the indigestible neutral detergent fiber (iNDF) and indigestible acid detergent fiber (iADF) content in feeds in six laboratories from institutions linked to the National Institute of Science and Technology in Animal Science (INCT-CA). Six feeds were evaluated: signal grass hay, sugarcane, corn silage, soybean meal, corn and citrus pulp. Estimated levels of iNDF and iADF proved to be dependent on the laboratory in which the analysis was performed. It was found that differences between laboratories ranged from 2.40 percentage points for soybean meal to 8.05 percentage points for sugarcane for iNDF analysis and from 1.79 percentage points for corn to 10.06 percentage points for hay for iADF analysis. It was observed that the individual evaluation of each material, the total random variation of the results between laboratories ranged from 88.75 to 96.77% and 88.75 to 98.40% for iNDF and iADF analysis, respectively. The iNDF and iADF levels are dependent on the interaction effect between the evaluated material and laboratory and have low reproducibility; this may be a consequence of the differences between the methods practiced by each laboratory, demonstrating lack of standardization of procedures used by the laboratories.


1947 ◽  
Vol 19 (1) ◽  
pp. 8-21
Author(s):  
T. Lonka

In Finland the protein content of the feeds is in general so low that it restricts the milk yield particularly in herds of high production capacity. This is especially significant for the reason that owing primarily to climatic factors the quality of the feeds cannot be notably improved in this respect. Therefore an effort should be made to change the composition of milk by means of breeding in such a way that it would correspond to the possibilities of feed cultivation in Finland better than at present. This would mean that it should be endeavoured to breed cows whose milk is very fat-rich but at the same time poor in protein, in which case more of the commercially valuable butterfat could be produced on the feed grown on the estate. Since a correspondingly greater amount of milk of poor protein percentage could be produced than that of protein rich milk, the breeding of such cows would not decrease the yield of protein, which is of such great food value, but as great an amount in kilograms of milk protein would be available as earlier for domestic purposes as well as dairies. We have aimed at this goal in our country in general by endeavouring to raise the fat percentage of the milk by means of breeding. It is known that protein percentage does not increase exactly as markedly as the fat percentage, wherefore the protein yield per kilogram of fat decreases as the percentage rises. The influence of breeding would however be incomparably greater if low protein percentage were selected simultaneously with high fat percentage. In the investigation we have dealt with the possibilities of such selection in Finnish cattle, in connection with which we have striven to make clear how much the protein percentage of the milk varies independently of the fat percentage. The material comprises 54 West-Finnish Native cows; the fat and protein percentages of their milk yield has been determined once a month during one lactation. The relation of fat and protein is not the same throughout the whole lactation, but it changes so that at the end of the lactation the protein percentage as compared with the fat percentage is relatively greater than at the beginning of the period (Table and Figure 1). The averages of the fat and protein percentages and likewise the correlation between them depend consequently upon the length of the calving interval. Therefore the said averages have been estimated only on the basis of 2—7 production months. Fy means of these averages r = +0.60 ± 0.09 was derived as the coefficient of correlation between the fat and protein percentages y = 1.53 + 0.39 x as the regression equation, x = fat percentage and y = protein percentage. The individual cows diverge very much from the general rule set by the regression equation, which can be concluded already from the comparatively low value of the coefficient of correlation. The protein percentage of the milk yield of the West- Finnish Native cows diverges at least about one per cent independently of the fat percentage when judging on the basis of the extreme divergencies in the material. Although a part of the divergency evidently is caused by external factors, the role of the genetic factors is nevertheless so great that there appear to be great possibilities for breeding cows producing fat-rich milk by means of breeding but having a protein which would be considerably lower than the present average.


Author(s):  
Kathryn Elmer ◽  
Raymond Soffer ◽  
J. Pablo Arroyo-Mora ◽  
Margaret Kalacska

Over the past 30 years, the use of field spectroscopy has risen in importance in remote sensing studies for the characterization of the surface reflectance of materials in situ within a broad range of applications. Potential uses range from measurements of individual targets of interest (e.g. vegetation, soils, validation targets etc.), to characterizing the contributions of different materials within larger spatially-mixed areas as would be representative of the spatial resolution captured by a sensor pixel (UAV to satellite scale). As such, it is essential that a complete and rigorous assessment of both the data-acquisition procedures, and the suitability of the derived data product be carried out. The measured energy from solar-reflected range spectroradiometers is influenced by the viewing and illumination geometries and the illumination conditions which vary due to changes in solar position and atmospheric conditions. By applying corrections, the estimated absolute reflectance (Rabs) of targets can be calculated. This property is independent of illumination intensity or conditions and is the metric commonly suggested to be used to compare spectra even when data are collected by different sensors or acquired under different conditions. By standardizing the process of estimated Rabs, as is provided in the described toolkit, consistency and repeatability in processing are ensured and the otherwise labor intensive and error-prone processing steps are streamlined. The resultant end data product (Rabs) represents our best current effort to generate consistent and comparable ground spectra which have been corrected for viewing and illumination geometries as well as other factors such as the individual characteristics of the reference panel used during acquisition.


Sign in / Sign up

Export Citation Format

Share Document