Kualitas Organoleptik Es Krim Santan

2021 ◽  
Vol 7 (2) ◽  
pp. 78
Author(s):  
Thresia Dewi Kartini B. ◽  
Lydia Fanny ◽  
Magdalena Magdalena
Keyword(s):  
Raw Materials ◽  
Ice Cream ◽  
Fat Content ◽  
Coconut Milk ◽  
Raw Material ◽  
Ministry Of Health ◽  
Organoleptic Quality ◽  
Under Five ◽  
Red Bean

The results of Riskesdas 2018 show that the prevalence of malnourished under-five children in South Sulawesi is still high compared to the national figures and WHO targets. Makassar City has a higher number of children under five suffering from malnutrition than other cities/districts, namely 22.1% underweight, 25.2% stunting, and 9.4% wasting. Ice cream has a high nutritional value depending on the quality of the raw materials, so the raw materials used need to be known for certain. Coconut milk as a raw material for coconut milk ice cream has a high-fat content, the fat content makes the ice cream soft and of good quality. This study aims to determine the organoleptic quality of coconut milk ice cream. This type of experimental research is a completely randomized design (CRD), namely, there are 3 treatments of coconut milk with the addition of red bean and papaya pulp, namely F1=10g:50g, F2=20g:100g, and F3=30g:150g, each repetition 2 times, with F0 coconut milk without the addition of red bean pulp and papaya. Organoleptic quality was obtained from the organoleptic test of coconut milk ice cream to 40 untrained panelists at the Department of Nutrition of the Health Polytechnic of the Ministry of Health Makassar and of the Health Polytechnic of the Ministry of Health Banjarmasin. The results showed that the organoleptic quality in terms of color with p=0.001 and texture p=0.025 meant that there was an effect of adding red bean pulp and papaya. Meanwhile, from the aspect of aroma with p = 0.545 and taste p = 0.448, it shows that there is no effect of adding red bean porridge and papaya to coconut milk ice cream. The most acceptable coconut milk ice cream based on organoleptic quality was F1 (10g:50g) with a total score of 157.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

IMPACT OF INNOVATIVE METHOD OF PREPARING TOBACCO LEAVES FOR DRYING ON THE BASIC PARAMETERS OF QUALITY OF TOBACCO RAW MATERIAL

2019 ◽  
Author(s):  
Е.Е. Ульянченко
Keyword(s):  
Chemical Composition ◽  
Quality Indicators ◽  
Raw Materials ◽  
Raw Material ◽  
Tobacco Leaves ◽  
Commercial Grade ◽  
Innovative Method ◽  
Main Indicator ◽  
Basic Parameters

Исследовано влияние приема прорезания средней жилки на основные качественные показатели табачного сырья. Исследования проводили на листьях основных сортотипов табака Трапезонд и Остролист по массовым ломкам. Прорезание жилки осуществляли на инновационном оборудовании экспериментальном образце линии подготовки листьев табака к сушке ЛПТС360 (ВНИИТТИ, Краснодар). Качество табачного сырья с прорезанной жилкой определяли по товарным сортам, технологическим и курительным свойствам, химическому составу по методикам лабораторного контроля ВНИИТТИ. Инновационный способ подготовки табака к сушке в едином потоке с применением технологического оборудования, включающего прорезатель, выявил положительный технологический результат. Установлена эффективность приема прорезания средней жилки: срок естественной сушки листьев с прорезанной жилкой сократился в 2,5 раза выход 1го товарного сорта сырья составил 74,60 87,93 выход волокна сырья с прорезанной жилкой превышает минимальное значение технологических норм (75) в 1,15 1,26 раз условный расход сырья на единицу курительных изделий меньше норматива на 6 25 улучшен основной показатель химического состава табачного сырья (число Шмука) в 1,6 4,6 раза у сортотипа Трапезонд, в 1,2 1,5 раза у сортотипа Остролист дегустационные свойства сырья не ухудшились. Инновационный способ подготовки листьев табака к сушке, включающий прием прорезания средней жилки, рекомендуется для применения в производстве табачного сырья. The influence of middle vein cutting method on the main quality indicators of tobacco raw materials is studied. Studies were carried out on the leaves of the main varieties of tobacco Trapezond and Ostrolist, on mass breakdowns. Vein cutting was carried out on the innovative equipment of the line of preparation of tobacco leaves for drying LPTS360 (GNU VNIITTI RAA, Krasnodar). The quality of tobacco raw materials with a cut vein was determined by commercial grades, technological and Smoking properties, chemical composition in accordance with the methods VNIITTI. An innovative method of preparing tobacco for drying in a single stream with the use of technological equipment, including a cutter, revealed a positive technological result. The period of natural drying of leaves with cut veins decreased by 2,5 times. The yield of the 1st commercial grade of raw materials was 74,60 87,93. The output of the fiber raw material with cut vein exceeds the minimum value of technological norms (75) in 1,15 1,26 times. Conditional consumption of raw materials per unit of Smoking products is less than the norm by 6 25. The method of cutting the middle vein of the leaves improves the main indicator in the chemical composition of tobacco raw materials (Schmuck ratio) 1,6 4,6 times in the variety Trapezond and 1,2 1,5 times in the variety Ostrolist. The tasting properties of raw materials have not deteriorated. Analysis of raw material quality indicators showed that the innovative method of cutting the middle vein is effective and recommended for use in the production of tobacco raw materials.

scholarly journals TECHNICAL AND TECHNOLOGICAL SOLUTIONS FOR PREPARING FLAX RAW MATERIALS FOR PROCESSING

2021 ◽  
pp. 227-237
Author(s):  
Yu. Вerezovsky ◽  
T. Kuzmina ◽  
M. Yedynovych ◽  
G. Boyko ◽  
N. Lyalina ◽  
...  
Keyword(s):  
Raw Materials ◽  
Hollow Structure ◽  
Weather Conditions ◽  
Raw Material ◽  
Hollow Structures ◽  
Adverse Weather Conditions ◽  
Adverse Weather ◽  
Long Time ◽  
Experimental Researches

The article contains theoretical and experimental researches in the field of the preservation of flax raw material of high moisture content. In the article, factors that are worsening the quality of flax raw material, resulting in non-observance of agrotechnical and technological requirements of preparing, collecting, harvesting the stem material, adverse weather conditions and other factors, are considered. The objective of this paper is to study the influence of preservation agents’ concentrations and of hollow structure device on the quality of flax raw material during long-time storage. In the article, the influence of aqueous preservatives’ concentration, humidity, storage length on the quality of fibrous products, obtained as a result of processing stem material, is analyzed. The influence of the device of hollow structures, as an alternative to preservatives, on the storage process of bast crops stem material was evaluated. The method of flax retted straw storage is described, actions of the main factors influence on the strength of fibers are analyzed. It is demonstrated, that prolongation of flax raw material preservation time can be made by using preservatives without considerable wastes of quality.

scholarly journals PENGEMBANGAN PRODUK SALA LAUAKDENGAN TEKNIK GELATINISASI

2019 ◽  
Vol 8 (2) ◽  
pp. 259
Author(s):  
Elfrimo Dwi ◽  
Anni Faridah ◽  
Ernawati .
Keyword(s):  
Research Method ◽  
Rice Flour ◽  
Fat Content ◽  
Traditional Food ◽  
Oil Absorption ◽  
Starch Granules ◽  
Organoleptic Quality ◽  
Is Research ◽  
West Sumatra

Sala lauak is a traditional food that is easily found in West Sumatra. The development of sala leak products is carried out by reducing oil using gelatinization techniques. The process that occurs in gelatinization is when the starch granules are given water and heat, the starch granules will expand. This study aims to (1) develop sala lauak products by gelatinization techniques on oil absorption, (2) determine the organoleptic quality of sala lauak products by gelatinization technique processes, and (3) determine the fat content of sala lauak products by gelatinization technique processes. This research method is Research and Development (RnD). The results of this study in the organoleptic quality produced by sala lauak with pragelatinization flour showed a significant influence on the quality of inner texture, outer texture, taste, shape, and color. The same thing also happened to a significant reduction in fat content by three times lower using pregelatinized rice flour which is 7.4% compared to ordinary rice flour which is 25%. Kata kunci  :   Sala Lauak, Gelatinization Technique, rice flour.

scholarly journals Construction sands of Podillya: patterns of distribution, resources and use

2019 ◽  
Vol 27 (3) ◽  
pp. 510-519
Author(s):  
M. Syvyj ◽  
B. Gavrychok
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Simultaneous Increase ◽  
Clay Material ◽  
Material Base ◽  
Resource Base ◽  
Apparent Correlation ◽  
The Baltic ◽  
Further Development

This article presents the characteristics of the resource base of building sands within the three Podillya regions, the patterns of sands distribution, and proposals for increasing the extraction of raw materials . The construction sands of Podillya are confined to the Upper Cretaceous, Neogene and Anthropogenicdeposits. The decrease of the thickness of the sandy strata of the Opilsk Neogene suite in the eastern direction was observed with the simultaneous increase in the thickness of the overlapping strata of the rocks. There is no apparent correlation between the thickness of sandy interlayers and the quality of sands. The interdependence of the chemical composition of Neogene sands and the sand size module is established.The genetic predisposition for the distribution of building sands in different parts of the Podillya territory has been established. Four groups of sand deposits of different age have been identified within the Podillya regions, which contrast sharply with single deposits in the neighbouring territories.There is a very uneven distribution of explored reserves of sandy raw materials across the region and accordingly in the provision of construction sands in the different oblasts /regions of Podillya. The areas best provided with sandy raw materials are the central districts of Ternopil region and Slavutsky district of Khmelnytsky region . Sands of the Baltic stage distributed in Vinnytsia region are mostly poor in quality, clogged with clay material and require enrichment. The further development of the mineral raw material base and the prospects for increasing the production of construction sand in the Podillya regions is associated with the increase in production at the prepared deposits, the commissioning of reserve deposits, the conducting of prospecting and exploration work in the proposed potentially exploitable areas and additional exploration of individual deposits that are exploited. The research allows us to evaluate objectively the existing base of sand raw materials for various purposes in the Podillya region and to develop on this basis measures to increase it. The importance of the study is determined by the acute shortage of the raw material in most administrative districts of Khmelnytsky and Vinnytsia regions, by the growth in the volume of construction work (and accordingly the requirements for sandy raw materials) both in Podillya and in the country.

scholarly journals Создание гибридов сверхсахарной кукурузы с высоким уровнем антиоксидантной активности с использованием тест-системы на основе стабильного радикала DPPH

2016 ◽  
pp. 50-56
Author(s):  
В. В. Поздняков ◽  
Ю. В. Харченко ◽  
Л. Я. Харченко ◽  
О. В. Анцыферова
Keyword(s):  
Antioxidant Activity ◽  
Functional Food ◽  
Raw Materials ◽  
Raw Material ◽  
Maize Starch ◽  
Wide Range ◽  
Total Antioxidant ◽  
Index Value ◽  
Canning Industry

Гибриды сахарной и сверхсахарной кукурузы являются хорошим сырьем для производства функциональных пищевых продуктов, в том числе диетического и детского питания. Важными показателями высокого качества этих продуктов являются повышенное содержание белка и ценного масла, незначительное количество плохо усвояемого кукурузного крахмала и высокое содержание антиоксидантов, а также отменные вкусовые качества. В работе представлены данные по оценке антиоксидантной активности большой группы новых перспективных гибридов сверхсахарной кукурузы среднеспелой группы, созданных с целью получения ценных источников сырья для консервной промышленности. Значения показателя общей антиоксидантной активности варьировали в широком интервале значений (от 31,8 % до 60,4 %, 568,4–1008 мкг/г семян), что указывает на перспективность использования этого важного биохимического параметра в селекции сверхсахарной кукурузы на качество. Hybrids of excess sugar maize are good raw material for the production of functional food products, including baby food and diet. Important indicators of high quality of these products are high protein content and a valuable oil, a small amount of poorly digestible maize starch and a high content of antioxidants, and also excellent taste qualities. The paper presents data on the evaluation of the antioxidant activity of a large group of promising new hybrids of excess sugar maize of mid-group created in order to obtain valuable raw materials for the canning industry. Index value of total antioxidant activity varied over a wide range (from 31,8 % to 60,4 %, 568,4–1,008 mg/g of seed), which indicates on promising use of this important parameter in the breeding of biochemical excess sugar maize on quality.

scholarly journals Reforestation of ‘Village Forest’ to Improve Sustaiability Creative Industries in Desa Siponjot

2021 ◽  
Vol 5 (2) ◽  
pp. 714-722
Author(s):  
Noverita Sprinse Vinolina ◽  
Antonio Marro Sipayung ◽  
Dardanila ◽  
Sondang Pintauli
Keyword(s):  
Forest Restoration ◽  
Raw Materials ◽  
Economic Value ◽  
Economic Benefits ◽  
Musical Instruments ◽  
Creative Industries ◽  
Raw Material ◽  
High Quality ◽  
The Village

This program is conducted to assist Siponjot Village while empowering the people of Siponjot Village to be able to utilize and maximize the benefit of the village forest. Village forest might support the availability of raw materials required for making musical instruments, such as high quality of wood, including how to process wood waste from making musical instruments to be used as creative souvenirs and improve the economic value. The raw material for production determined its results of the production of wood-based musical instruments. Thus, in order to produce a high quality tanginang, hasapi, and gondang, which previously began to be produced by arts crafts in the Sitangkubang area of ​​Siponjot Village, a high quality of raw materials is needed. The community service team surveyed the location of planting seeds for village forest restoration, provided socialization related to the importance of village forest cultivation and the suitability of the Siponjot Village area for the cultivation of these plants. Village forest restoration aims to maintain the beauty and beauty of the village. Implementation of village reforestation activities starting from socializing forest tourism and the strength of village forests to the community, followed by a discussion about village forest management and its economic benefits. Handover of a thousand units of forest plant seedlings given to the villagers of Siponjot as part of the forest restoration program in the area.

The issue of "oil shrinkage" during the compounding of oils in the processes of production, collection, preparation and transportation of hydrocarbon raw materials

2021 ◽  
pp. 104-113
Author(s):  
O. P. Deryugina ◽  
E. A. Trapeznikov
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Colloidal System ◽  
Main Pipelines ◽  
Different Types ◽  
Preliminary Study ◽  
The Stability ◽  
Mixed Oil

The article discusses the issue of industrial compounding, which improves the quality of the raw materials supplied to the main pipelines. Compounding from "to compound" (English) - to mix. When mixing different types of oil obtained, "incompatibility" is possible, which is expressed in the precipitation of a solid sediment and violation of the stability of the colloidal system and due to the differing properties of oils. Attention to this problem is due to the tightening of requirements for the quality of raw materials that must comply with modern standards. The article discusses the causes of the problem of "incompatibility" of oil during compounding and effective ways of solving it, substantiates the need for a preliminary study of the properties of mixed oil in order to identify possible incompatibility of various types of oil. The standard tests for determination of incompatibility indices characterizing the ability of raw materials to mix are considered. The article substantiates the need to develop methods for diagnosing the incompatibility of oils as the most important task of modern chemical science, the solution of which will improve the quality of the raw material obtained and solve many technological problems in the compounding process.

Sign in / Sign up

Export Citation Format

Share Document