scholarly journals A Novel Fast-Setting Strontium-Containing Hydroxyapatite Bone Cement With a Simple Binary Powder System

2021 ◽  
Vol 9 ◽  
Author(s):  
Lijuan Sun ◽  
Tongyang Li ◽  
Sen Yu ◽  
Mengmeng Mao ◽  
Dagang Guo
Keyword(s):  
Compressive Strength ◽  
Bone Cement ◽  
Setting Time ◽  
Synthesis Temperature ◽  
Transformation Rate ◽  
Step Method ◽  
Cement Powder ◽  
Calcium Phosphate Bone Cement ◽  
One Step ◽  
Application Potential

In recent years, strontium-substituted calcium phosphate bone cement (Sr-CPC) has attracted more and more attentions in the field of bone tissue repair due to its comprehensive advantages of both traditional CPC and Sr ions. In this study, a crucial Sr-containing α-Ca3–xSrx(PO4)2 salt has been synthesized using a simplified one-step method at lower synthesis temperature. A novel Sr-CPC has been developed based on the simple binary Sr-containing α-Ca3–xSrx(PO4)2/Ca4(PO4)2O cement powder. The physicochemical properties and hydration mechanism of this Sr-CPC at various Sr contents were intensively investigated. The setting product of this Sr-CPC after a set for 72 h is a single-phase Sr-containing hydroxyapatite, and its compressive strength slightly decreased and its setting time extended with the increase of Sr content. The hydration process included the initial formation of the medium product CaHPO4⋅2H2O (30 min∼1 h), the following complete hydration of Ca4(PO4)2O and the initially formed CaHPO4⋅2H2O (2∼6 h), and the final self-setting of α-Ca3–xSrx(PO4)2 (6 h∼). The compressive strength of Sr-CPC, which was closely related to the transformation rate of Sr-containing hydroxyapatite, tended to increase with the extension of hydration time. In addition, Sr-CPC possessed favorable cytocompatibility and the effect of Sr ions on cytocompatibility of Sr-CPC was not obvious at low Sr contents. The present study suggests α-Ca3–xSrx(PO4)2 is a kind of vital Sr-containing salt source which is useful to develop some novel Sr-containing biomaterials. In addition, the new Sr-containing cement system based on this simple binary α-Ca3–xSrx(PO4)2/Ca4(PO4)2O cement powder displayed an attractive clinical application potential in orthopedics.

Physicochemical and Mechanical Properties of Composite of Chitosan Microspheres/Calcium Phosphate Cement

2007 ◽  
Vol 336-338 ◽  
pp. 1654-1657
Author(s):  
Rui Liu ◽  
Li Min Dong ◽  
Qing Feng Zan ◽  
Chen Wang ◽  
Jie Mo Tian
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Calcium Phosphate ◽  
Bone Cement ◽  
Setting Time ◽  
Chemical Properties ◽  
Phase Evolution ◽  
Chitosan Microspheres ◽  
Setting Times ◽  
Calcium Phosphate Bone Cement

The aim of this work is to improve the mechanical properties of calcium phosphate bone cement (CPC) by appending chitosan microspheres to CPC base. That chitosan degrades rapidly than bone cement has been proved by previous investigations. Porous CPC has low compressive strength because of the pores in it weakening the structure. Additive chitosan microspheres can improve the mechanical properties by bearing the compress with the CPC base and produce pores after degradation. This study investigates the effect of chitosan microspheres on the setting time, mechanical properties, phase evolution and morphology of CPC. The additive proportion of chitosan microspheres ranges from 0 wt% to 30 wt%. Compared with original CPC, the modified CPC has higher compressive strength, without significantly affecting the chemical properties. The phase composition of the CPC is tested by XRD. The microstructures of CPC are observed using SEM. The final setting times range from 5~15 minutes and can be modulated by using different liquid and powder (L/P) ratio.

scholarly journals Enhancing the mechanical properties and cytocompatibility of magnesium potassium phosphate cement by incorporating oxygen-carboxymethyl chitosan

2020 ◽  
Author(s):  
Changtian Gong ◽  
Shuo Fang ◽  
Kezhou Xia ◽  
Jingteng Chen ◽  
Liangyu Guo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Physicochemical Properties ◽  
Bone Cement ◽  
Ph Value ◽  
Setting Time ◽  
Potassium Phosphate ◽  
Carboxymethyl Chitosan ◽  
Bioactive Substances ◽  
Magnesium Potassium Phosphate Cement

Abstract Incorporating bioactive substances into synthetic bioceramic scaffolds is challenging. In this work, oxygen-carboxymethyl chitosan (O-CMC), a natural biopolymer that is nontoxic, biodegradable and biocompatible, was introduced into magnesium potassium phosphate cement (K-struvite) to enhance its mechanical properties and cytocompatibility. This study aimed to develop O-CMC/magnesium potassium phosphate composite bone cement (OMPC), thereby combining the optimum bioactivity of O-CMC with the extraordinary self-setting properties and mechanical intensity of the K-struvite. Our results indicated that O-CMC incorporation increased the compressive strength and setting time of K-struvite and decreased its porosity and pH value. Furthermore, OMPC scaffolds remarkably improved the proliferation, adhesion and osteogenesis related differentiation of MC3T3-E1 cells. Therefore, O-CMC introduced suitable physicochemical properties to K-struvite and enhanced its cytocompatibility for use in bone regeneration.

Study on Physicochemical Properties of the Carbonated Hydroxyapatite Bone Cement

2007 ◽  
Vol 280-283 ◽  
pp. 1545-1548
Author(s):  
Li Min Dong ◽  
Chen Wang ◽  
Jie Mo Tian ◽  
Jian Pan ◽  
Qing Feng Zan
Keyword(s):  
Compressive Strength ◽  
Phase Composition ◽  
Physicochemical Properties ◽  
Bone Cement ◽  
Pore Size ◽  
Setting Time ◽  
Mineral Phase ◽  
Carbonated Hydroxyapatite ◽  
Natural Bone ◽  
Ft Ir

Carbonated hydroxyapatite (CHA) bone cement is capable of self-setting and has the component similar to the mineral phase of natural bone. But it is compact in structure and short of cavity, which limits new bone growing into CHA bone cement. In this paper, the foaming method was adopted to prepare the porous CHA. The setting time, compressive strength, porosity and pore size of the CHA were examined. The phase composition of the CHA was tested with XRD and FT-IR. The microstructure of the CHA was observed with SEM. The results show that setting time of 7~19 minutes, compressive strength of 26~32MPa, pore size of 100~200µm, porosity of 50~60%.

Evaluation of setting time and compressive strength of a new bone cement precursor powder containing Mg–Na–Ca

2018 ◽  
Vol 232 (10) ◽  
pp. 1017-1024 ◽  
Author(s):  
Mohammad Hossein Esnaashary ◽  
Hamid Reza Rezaie ◽  
Alireza Khavandi ◽  
Jafar Javadpour
Keyword(s):  
Compressive Strength ◽  
Bone Cement ◽  
Setting Time ◽  
Precursor Powder ◽  
Effective Parameters ◽  
X Ray Diffraction ◽  
Liquid Ratio ◽  
X Ray ◽  
The One ◽  
Kinetics Of

Taking the advantage of a novel magnesium phosphate precursor containing Na and Ca, the cementation rate of the cement, including only Mg/Mg–Na–Ca, was studied. Besides, two effective parameters, that is, calcination temperature, 650 °C and 800 °C, and powder-to-cement liquid ratio, 1 and 1.5 g/mL, were assessed. X-ray diffraction, scanning electron microscopy, ion chromatography, particle size analyser, Vicat needle and compression test were used to characterize the powders and obtained cements. The sample containing Mg–Na–Ca, calcined at 800 °C with powder-to-cement liquid ratio of 1.5, obtained the highest compressive strength, 20 MPa, but set fast. To control the kinetics of cementation, the powder containing Mg–Na–Ca calcined at 950 °C with powder-to-cement liquid ratio of 1.5 and 2 g/mL was assessed and the one with 2 g/mL set in 9 min possessing 22 MPa compressive strength was selected as optimal condition to be used as a candidate, injectable bone cement.

Radiopaque acrylic bone cement with bromine-containing acrylic monomer. II

e-Polymers ◽  
2009 ◽  
Vol 9 (1) ◽  
Author(s):  
Marius Ciprian Rusu ◽  
Ionut Cameliu Ichim ◽  
Marcel Popa ◽  
Daniela Rusu ◽  
Mihai Rusu
Keyword(s):  
Thermal Stability ◽  
Compressive Strength ◽  
Glass Transition ◽  
Thermal Properties ◽  
Transition Temperature ◽  
Bone Cement ◽  
Setting Time ◽  
Maximum Temperature ◽  
Acrylic Bone Cement ◽  
Compression Tests

AbstractBromine-containing methacrylate, 2-(2-bromoisobutyryloxy) ethyl methacrylate (BIEM), had been used in the formulation of acrylic radiopaque cements. The effect of this monomer incorporated into the liquid phase of acrylic bone cement (ABC), on the curing parameters, thermal properties, water absorption, density, compression tests and radiopacity was studied. A decrease of maximum temperature and an increase of the setting time were observed with the addition of the brominecontaining monomer in the radiolucent cement composition. Adding BIEM in radiolucent ABCs composition results in the decrease of glass transition temperature and increase in its thermal stability. The ABCs modified with bromine-containing comonomer are characterized by polymerization shrinkage lower than the radiolucent cement. Addition of bromine-containing comonomer in radiolucent ABC composition determines the increase of compressive strength. The ABCs modified with brominecontaining comonomer proved to be radiopaque.

scholarly journals A Method for Preparing Superhydrophobic Paper with High Stability and Ionic Liquid-Induced Wettability Transition

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4638
Author(s):  
Shangjie Jiang ◽  
Shisheng Zhou ◽  
Bin Du
Keyword(s):  
Ion Exchange ◽  
High Stability ◽  
Adsorption Properties ◽  
Step Method ◽  
The Poor ◽  
One Step ◽  
Application Potential ◽  
The Stability ◽  
Superhydrophobic Paper ◽  
Poor Solvent

In this study, the polymer PTSPM-PMETAC with anion adsorption properties was prepared by a one-step method, then the amino-modified nano-SiO2 was grafted onto the polymer to improve the roughness of the surface and enhance the stability of superhydrophobic properties, and a high-stability superhydrophobic paper with ion-induced wettability transition properties was successfully prepared. The study found that the paper can realize the reversible control of surface wettability through the exchange between the anions PF6− and Cl− adsorbed on the surface of PMETAC, and further investigation of the effect of different solvents on the ion exchange properties found that water was the poor solvent for ion exchange, while the mixtures of methanol, acetone, and methanol & water were the good solvent. On the whole, the preparation of superhydrophobic paper by this method not only simple in preparation process, low in cost and strong in universality, but also the prepared superhydrophobic paper has high transparency and good stability, which has great application potential in industrial production.

Properties of Powder Composite Polyhydroxybutyrate–Chitosan-Calcium Phosphate System

2017 ◽  
Vol 17 (1) ◽  
pp. 1-9
Author(s):  
L. Medvecky ◽  
R. Stulajterova ◽  
M. Giretova ◽  
M. Faberova
Keyword(s):  
Compressive Strength ◽  
Calcium Phosphate ◽  
Thin Layer ◽  
Composite System ◽  
Calcium Phosphates ◽  
Setting Time ◽  
Transformation Rate ◽  
Tetracalcium Phosphate ◽  
Hardening Process ◽  
Phosphate System

Abstract Prepared powder polyhydroxybutyrate – chitosan - calcium phosphate composite system with 10 wt % of biopolymer component can be utilized as biocement which is characterized by the prolonged setting time and achieves wash out resistance after 5 minutes of setting. The origin powder tetracalcium phosphate/nanomonetite agglomerates were coated with the thin layer of biopolymer which decelerates both the transformation rate of calcium phosphates and hardening process of composites. The porosity of hardened composite was around 62% and the compressive strength (8 MPa) was close to trabecular bone. No cytotoxicity of composite resulted from live/dead staining of osteoblasts cultured on substrates.

Effect of the Composition in β-TCP-MCPM Bone Cement Containing Dense ß-TCP Granules

2005 ◽  
Vol 284-286 ◽  
pp. 141-144 ◽  
Author(s):  
Kyung Sik Oh ◽  
Soo Ryong Kim
Keyword(s):  
Compressive Strength ◽  
Bone Cement ◽  
Tricalcium Phosphate ◽  
Setting Time ◽  
Mixing Ratio ◽  
Small Departure ◽  
Drastic Decrease ◽  
Time Density ◽  
Effect Of The Composition ◽  
Ratio Range

Effect of the starting compostion was studied in bone cement containg coarse b-tricalcium phosphate (b-TCP) granules which was very dense and round. With respect to the mixing ratio between b-tricalcium phosphate and monocalcium monophophate (T:M), the properties such as setting time, density and compressive strength were measured. The properties of bone cement prepared from normal powdery b-TCP was strongly dependent on the initial mixing ratio (T:M). Though the compressive strength as well as density was maximum at T:M = 6:4, small departure of compostions from T:M=6:4 resulted in drastic decrease of compresive strength. On the contrary, in the specimens from granular b-TCP, compressive strength was much less deependent on the initial mixing ratio. Range of optimum compressive strength covered from T:M=6:4 to 8:2. Therefore, granular groups provided more degree of freedom to control other properties such as setting time while maintaing its compressive strength.

scholarly journals Comparison of Elution Characteristics and Compressive Strength of Biantibiotic-Loaded PMMA Bone Cement for Spacers: Copal® Spacem with Gentamicin and Vancomycin versus Palacos® R+G with Vancomycin

2018 ◽  
Vol 2018 ◽  
pp. 1-5 ◽  
Author(s):  
Sebastian P. Boelch ◽  
Kilian Rueckl ◽  
Clara Fuchs ◽  
Martin Jordan ◽  
Markus Knauer ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Bone Cement ◽  
Compression Test ◽  
Fetal Calf Serum ◽  
Calf Serum ◽  
Cement Powder ◽  
Pmma Bone Cement ◽  
Gentamicin Concentration

Purpose. Copal® spacem is a new PMMA bone cement for fabricating spacers. This study compares elution of gentamicin, elution of vancomycin, and compressive strength of Copal® spacem and of Palacos® R+G at different vancomycin loadings in the powder of the cements. We hypothesized that antibiotic elution of Copal® spacem is superior at comparable compressive strength. Methods. Compression test specimens were fabricated using Copal® spacem manually loaded with 0.5 g gentamicin and additionally 2 g, 4 g, and 6 g of vancomycin per 40 g of cement powder (COP specimens) and using 0.5 g gentamicin premixed Palacos® R+G manually loaded with 2 g, 4 g, and 6 g of vancomycin per 40 g of cement powder (PAL specimens). These specimens were used for determination of gentamicin and vancomycin elution (in fetal calf serum, at 22°C) and for determination of compressive strength both prior and following the elution tests. Results. Cumulative gentamicin concentrations (p < 0.005) and gentamicin concentration after 28 days (p ≤ 0.043) were significantly lower for COP specimens compared to PAL specimens. Cumulative vancomycin concentrations were significantly higher (p ≤ 0.043) for COP specimens after the second day. Vancomycin concentrations after 28 days were not significantly higher for the Copal specimens loaded with 2 g and 4 g of vancomycin. Compressive strength was not significantly different between COP specimens and PAL specimens before elution tests. Compressive strength after the elution tests was significantly lower (p = 0.005) for COP specimens loaded with 2 g of vancomycin. Conclusion. We could not demonstrate consistent superior antibiotic elution from Copal® spacem compared to Palacos® R+G for fabricating gentamicin and vancomycin loaded spacers. The results do not favor Copal® spacem over Palacos® R+G for the use as a gentamicin and vancomycin biantibiotic-loaded spacer.

scholarly journals Effect of Calcium Acetate Content on Apatite-Forming Ability and Mechanical Property of PMMA Bone Cement Modified with Quaternary Ammonium

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4998
Author(s):  
Haiyang Wang ◽  
Toshinari Maeda ◽  
Toshiki Miyazaki
Keyword(s):  
Compressive Strength ◽  
Bone Cement ◽  
Setting Time ◽  
Antibacterial Properties ◽  
Calcium Acetate ◽  
The Body ◽  
Apatite Formation ◽  
Pmma Bone Cement ◽  
Pmma Cement

Polymethyl methacrylate (PMMA)-based bone cement is a popular biomaterial used for fixation of artificial joints. A next-generation bone cement having bone-bonding ability, i.e., bioactivity and antibacterial property is desired. We previously revealed that PMMA cement added with 2-(tert-butylamino)ethyl methacrylate, γ-methacryloxypropyltrimethoxysilane and calcium acetate showed in vitro bioactivity and antibacterial activity. This cement contains calcium acetate at 20% of the powder component. Lower content of the calcium acetate is preferable, because the release of a lot of calcium salt may degrade mechanical properties in the body environment. In the present study, we investigate the effects of calcium acetate content on the setting property and mechanical strength of the cement and apatite formation in simulated body fluid (SBF). The setting time increased and the compressive strength decreased with an increase in calcium acetate content. Although the compressive strength decreased after immersion in SBF for 7 d, all the cements still satisfied the requirements of ISO5833. Apatite was formed in SBF within 7 d on the samples where the calcium acetate content was 5% or more. Therefore, it was found that PMMA cement having antibacterial properties and bioactivity can be obtained even if the amount of the calcium acetate is reduced to 5%.

Sign in / Sign up

Export Citation Format

Share Document