scholarly journals Dipsticks with Reflectometric Readout of an NIR Dye for Determination of Biogenic Amines

Chemosensors ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 99
Author(s):  
Sarah N. Mobarez ◽  
Nongnoot Wongkaew ◽  
Marcel Simsek ◽  
Antje J. Baeumner ◽  
Axel Duerkop
Keyword(s):  
Biogenic Amines ◽  
Indium Tin Oxide ◽  
Near Infrared ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Sample Pretreatment ◽  
Primary Amines ◽  
Nir Dye

Electrospun nanofibers (ENFs) are remarkable analytical tools for quantitative analysis since they are inexpensive, easily produced in uniform homogenous mats, and provide a high surface area-to-volume ratio. Taking advantage of these characteristics, a near-infrared (NIR)-dye was doped as chemosensor into ENFs of about 500 nm in diameter electrospun into 50 µm thick mats on indium tin oxide (ITO) supports. The mats were made of cellulose acetate (CA) and used as a sensor layer on optical dipsticks for the determination of biogenic amines (BAs) in food. The ENFs contained the chromogenic amine-reactive chameleon dye S0378 which is green and turns blue upon formation of a dye-BA conjugate. This SN1-reaction of the S0378 dye with various BAs was monitored by reflectance measurements at 635 nm where the intrinsic absorption of biological material is low. The difference of the reflectance before and after the reaction is proportional to BA levels from 0.04–1 mM. The LODs are in the range from 0.03–0.09 mM, concentrations that can induce food poisoning but are not recognized by the human nose. The calibration plots of histamine, putrescine, spermidine, and tyramine are very similar and suggesting the use of the dipsticks to monitor the total sample BA content. Furthermore, the dipsticks are selective to primary amines (both mono- and diamines) and show low interference towards most nucleophiles. A minute interference of proteins in real samples can be overcome by appropriate sample pretreatment. Hence, the ageing of seafood samples could be monitored via their total BA content which rose up to 21.7 ± 3.2 µmol/g over six days of storage. This demonstrates that optically doped NFs represent viable sensor and transducer materials for food analysis with dipsticks.

scholarly journals RE-Based Inorganic-Crystal Nanofibers Produced by Electrospinning for Photonic Applications

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2679
Author(s):  
Alessandra Toncelli
Keyword(s):  
Rare Earth ◽  
Near Infrared ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Rare Earth Ions ◽  
Polymer Materials ◽  
Electrospinning Technique ◽  
Rare Earth Doped

Electrospinning is an effective and inexpensive technique to grow polymer materials in nanofiber shape with exceptionally high surface-area-to-volume ratio. Although it has been known for about a century, it has gained much interest in the new millennium thanks to its low cost and versatility, which has permitted to obtain a large variety of multifunctional compositions with a rich collection of new possible applications. Rare-earth doped materials possess many remarkable features that have been exploited, for example, for diode pumped bulk solid-state lasers in the visible and near infrared regions, or for biomedical applications when grown in nanometric form. In the last few decades, electrospinning preparation of rare-earth-doped crystal nanofibers has been developed and many different materials have been successfully grown. Crystal host, crystal quality and nanosized shape can deeply influence the optical properties of embedded rare earth ions; therefore, a large number of papers has recently been devoted to the growth and characterization of rare earth doped nanofibers with the electrospinning technique and an up-to-date review of this rapidly developing topic is missing; This review paper is devoted to the presentation of the main results obtained in this field up to now with particular insight into the optical characterization of the various materials grown with this technique.

scholarly journals Electrospun Nanofibers for Sensing and Biosensing Applications—A Review

2021 ◽  
Vol 22 (12) ◽  
pp. 6357
Author(s):  
Kinga Halicka ◽  
Joanna Cabaj
Keyword(s):  
High Surface ◽  
High Surface Area ◽  
Toxic Metal ◽  
Volume Ratio ◽  
Electrospun Nanofibers ◽  
Clinical Diagnostics ◽  
Loading Capacity ◽  
Electrospun Nanofiber ◽  
Sensing Platforms ◽  
Different Types

Sensors and biosensors have found applications in many areas, e.g., in medicine and clinical diagnostics, or in environmental monitoring. To expand this field, nanotechnology has been employed in the construction of sensing platforms. Because of their properties, such as high surface area to volume ratio, nanofibers (NFs) have been studied and used to develop sensors with higher loading capacity, better sensitivity, and faster response time. They also allow to miniaturize designed platforms. One of the most commonly used techniques of the fabrication of NFs is electrospinning. Electrospun NFs can be used in different types of sensors and biosensors. This review presents recent studies concerning electrospun nanofiber-based electrochemical and optical sensing platforms for the detection of various medically and environmentally relevant compounds, including glucose, drugs, microorganisms, and toxic metal ions.

scholarly journals NIR-responsive MXene nanobelts for wound healing

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Lin Jin ◽  
Xiaoqing Guo ◽  
Di Gao ◽  
Cui Wu ◽  
Bin Hu ◽  
...  
Keyword(s):  
Wound Healing ◽  
Vitamin E ◽  
Surface Area ◽  
Near Infrared ◽  
Coating Layer ◽  
High Surface ◽  
High Surface Area ◽  
High Mass ◽  
Polymeric Coating ◽  
Mass Loading

AbstractEffectively achieving wound healing is a great challenge. Herein, we facilely prepared temperature-responsive MXene nanobelt fibers (T-RMFs) carrying vitamin E with a controllable release ability for wound healing. These T-RMFs were composed of MXene nanosheets spread along polyacrylonitrile and polyvinylpyrrolidone composite nanobelts together with a thermosensitive PAAV- coating layer. The high mass loading and high surface area of the MXene nanosheets endow the T-RMFs with excellent photothermal properties. The temperature could be easily controlled by near-infrared (NIR) irradiation exposure, and then the thermoresponsive polymeric coating layer relaxed the interface to dissolve vitamin E and promote vitamin E release. The T-RMFs demonstrated excellent biocompatibility and wound-healing functions in cellular and animal tests. The facile method, high mass loading, high surface area, excellent wound-healing functions, interesting nanosheet/nanobelt structure, mass production potential, and NIR responsive properties of these T-RMFs indicate the great potential of our nanobelts for wound healing, tissue engineering, and much broader application areas. This facile nanosheet/nanobelt preparation strategy paves a new way for nanomaterial fabrication and applications.

scholarly journals Design Considerations for Borehole Thermal Energy Storage (BTES): A Review with Emphasis on Convective Heat Transfer

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-26 ◽  
Author(s):  
Helge Skarphagen ◽  
David Banks ◽  
Bjørn S. Frengstad ◽  
Harald Gether
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Theoretical Calculations ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Thermal Recovery ◽  
Conductive Heat ◽  
Geological Environment

Borehole thermal energy storage (BTES) exploits the high volumetric heat capacity of rock-forming minerals and pore water to store large quantities of heat (or cold) on a seasonal basis in the geological environment. The BTES is a volume of rock or sediment accessed via an array of borehole heat exchangers (BHE). Even well-designed BTES arrays will lose a significant quantity of heat to the adjacent and subjacent rocks/sediments and to the surface; both theoretical calculations and empirical observations suggest that seasonal thermal recovery factors in excess of 50% are difficult to obtain. Storage efficiency may be dramatically reduced in cases where (i) natural groundwater advection through the BTES removes stored heat, (ii) extensive free convection cells (thermosiphons) are allowed to form, and (iii) poor BTES design results in a high surface area/volume ratio of the array shape, allowing high conductive heat losses. The most efficient array shape will typically be a cylinder with similar dimensions of diameter and depth, preferably with an insulated top surface. Despite the potential for moderate thermal recovery, the sheer volume of thermal storage that the natural geological environment offers can still make BTES a very attractive strategy for seasonal thermal energy storage within a “smart” district heat network, especially when coupled with more efficient surficial engineered dynamic thermal energy stores (DTES).

Biological weathering in soil: the role of symbiotic root-associated fungi biosensing minerals and directing photosynthate-energy into grain-scale mineral weathering

2008 ◽  
Vol 72 (1) ◽  
pp. 85-89 ◽  
Author(s):  
J. R. Leake ◽  
A. L. Duran ◽  
K. E. Hardy ◽  
I. Johnson ◽  
D. J. Beerling ◽  
...  
Keyword(s):  
Carbon Allocation ◽  
High Surface ◽  
Turgor Pressure ◽  
High Surface Area ◽  
Volume Ratio ◽  
Mineral Weathering ◽  
Mycorrhizal Associations ◽  
P Content ◽  
Biological Weathering

AbstractBiological weathering is a function of biotic energy expenditure. Growth and metabolism of organisms generates acids and chelators, selectively absorbs nutrient ions, and applies turgor pressure and other physical forces which, in concert, chemically and physically alter minerals. In unsaturated soil environments, plant roots normally form symbiotic mycorrhizal associations with fungi. The plants provide photosynthate-carbohydrate-energy to the fungi in return for nutrients absorbed from the soil and released from minerals. In ectomycorrhiza, one of the two major types of mycorrhiza of trees, roots are sheathed in fungus, and 15—30% of the net photosynthate of the plants passes through these fungi into the soil and virtually all of the water and nutrients taken up by the plants are supplied through the fungi. Here we show that ectomycorrhizal fungi actively forage for minerals and act as biosensors that discriminate between different grain sizes (53—90 μm, 500—1000 μm) and different minerals (apatite, biotite, quartz) to favour grains with a high surface-area to volume ratio and minerals with the highest P content. Growth and carbon allocation of the fungi is preferentially directed to intensively interact with these selected minerals to maximize resource foraging.

scholarly journals Preparation and Characterization of Biocompatible Electrospun Nanofiber Scaffolds

2018 ◽  
Vol 62 (4) ◽  
Author(s):  
Edit Hirsch ◽  
Márió Nacsa ◽  
Ferenc Ender ◽  
Miklós Mohai ◽  
Zsombor K. Nagy ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Surface Characteristic ◽  
Poly Lactic Acid ◽  
Nanofibrous Scaffolds ◽  
Plasma Surface Treatment ◽  
Nanoscale Fibers ◽  
Solution Electrospinning

Nanoscale fibers were prepared for the fabrication of scaffolds by using a strong electrostatic field on the polymer solution. Electrospinning is widely applied for production of drug delivery, tissue engineering, and regenerative medicine systems as well as biosensors and enzyme immobilization. Nanofibers, thanks to their high surface area to volume ratio, can also mimic the extracellular matrix, thus it has been recognized as a suitable technique for the fast fabrication of scaffolds. This article demonstrates the fabrication of several nanofibrous scaffolds from biopolymers such as polycaprolactone, poly(lactic acid), poly(lactide-co-glycolide), poly(lactide-co-caprolactone) and poly(hydroxybutyrate-co-hydroxy valerate). The characterization and comparison of the scaffolds were achieved based on the morphology and surface characteristic of the nanofibers. The samples showed hydrophobic characteristic, thus a plasma surface treatment was applied successfully to increase hydrophilicity and the effect of the treatment was evaluated based on the wettability and the change in elemental composition of the surface based on X-ray photoelectron spectroscopy.

Fabrication of Hybrid Cell-Microbead Constructs Using Laser Direct-Write of Alginate Microbeads and Adherent Breast Cancer Cells

2013 ◽  
Author(s):  
Andrew D. Dias ◽  
David M. Kingsley ◽  
Douglas B. Chrisey ◽  
David T. Corr
Keyword(s):  
Drug Delivery ◽  
Mammalian Cells ◽  
Hybrid Cell ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Direct Write ◽  
Cellular Interactions ◽  
Paracrine Signaling ◽  
Laser Direct Write

Microbeads are becoming popular tools in tissue engineering as 3D microstructure hydrogels. The gel nature of microbeads enables them to sequester soluble factors and mammalian cells, and their high surface area-to-volume ratio allows diffusion between the bead and the environment [1,2]. Microbeads are thus good systems for drug delivery and can serve as 3D microenvironments for cells. To fully maximize their potential as delivery systems and microenvironments, it is highly desirable to create spatially-precise hybrid cultures of microbeads and mammalian cells. Precise placement of microbeads in proximity to patterned cells will allow the study of spatial cellular interactions, paracrine signaling, and drug delivery.

scholarly journals Nanotechnology for Environmental Remediation: Materials and Applications

Molecules ◽  
2018 ◽  
Vol 23 (7) ◽  
pp. 1760 ◽  
Author(s):  
Fernanda Guerra ◽  
Mohamed Attia ◽  
Daniel Whitehead ◽  
Frank Alexis
Keyword(s):  
Organic Compounds ◽  
Environmental Remediation ◽  
Organophosphorus Compounds ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Chlorinated Organic Compounds ◽  
Environmental Media ◽  
Chlorinated Organic ◽  
Materials Used

Environmental remediation relies mainly on using various technologies (e.g., adsorption, absorption, chemical reactions, photocatalysis, and filtration) for the removal of contaminants from different environmental media (e.g., soil, water, and air). The enhanced properties and effectiveness of nanotechnology-based materials makes them particularly suitable for such processes given that they have a high surface area-to-volume ratio, which often results in higher reactivity. This review provides an overview of three main categories of nanomaterials (inorganic, carbon-based, and polymeric-based materials) used for environmental remediation. The use of these nanomaterials for the remediation of different environmental contaminants—such as heavy metals, dyes, chlorinated organic compounds, organophosphorus compounds, volatile organic compounds, and halogenated herbicides—is reviewed. Various recent examples are extensively highlighted focusing on the materials and their applications.

scholarly journals Titanium carbide MXene: Synthesis, electrical and optical properties and their applications in sensors and energy storage devices

2019 ◽  
Vol 9 ◽  
pp. 184798041882447 ◽  
Author(s):  
Johnson Michael ◽  
Zhang Qifeng ◽  
Wang Danling
Keyword(s):  
Energy Storage ◽  
Electrical Properties ◽  
Titanium Carbide ◽  
Inorganic Compounds ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Energy Storage Materials ◽  
Post Processing ◽  
Energy Storage Devices

MXenes have been under a lot of scientific investigation due to the novel characteristics that are inherent to two-dimensional nanostructures. There are a multitude of MXenes being studied and one of the most popular among these would be the titanium carbides. The general formula for titanium carbide is Ti n+ 1C n for the nanosheets produced that have undergone much study in the past few years. These studies include how the etching process affects the final MXene sheet and how the post-processing via heat or combining with polymers and/or inorganic compounds influences the mechanical and electrical properties. It is found that different etching techniques can be used to change the electrical properties of the produced MXenes and different post-processing techniques can be used to further change the properties of the nanosheets. The possible application of the titanium carbide MXenes as chemical sensing and energy storage materials will be briefly discussed. MXene nanosheets show promise in such devices due to their high surface area to volume ratio and their specific surface structure with feasible surface functionalization.

Sign in / Sign up

Export Citation Format

Share Document