scholarly journals Methodology for Selecting the Operating Conditions of a Vibration Generator Used in the Hot-Dip Galvanizing Process

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2042
Author(s):  
Wojciech Kacalak ◽  
Igor Maciejewski ◽  
Dariusz Lipiński ◽  
Błażej Bałasz
Keyword(s):  
Simulation Model ◽  
Asynchronous Motor ◽  
Experimental Tests ◽  
Suspension System ◽  
Operating Conditions ◽  
Test Results ◽  
Forced Simulation

A simulation model and the results of experimental tests of a vibration generator in applications for the hot-dip galvanizing process are presented. The parameters of the work of the asynchronous motor forcing the system vibrations were determined, as well as the degree of unbalance enabling the vibrations of galvanized elements weighing up to 500 kg to be forced. Simulation and experimental tests of the designed and then constructed vibration generator were carried out at different intensities of the unbalanced rotating mass of the motor. Based on the obtained test results, the generator operating conditions were determined at which the highest values of the amplitude of vibrations transmitted through the suspension system to the galvanized elements were obtained.

scholarly journals Investigation of the Performances of a Diesel Engine Operating on Blended and Emulsified Biofuels from Rapeseed Oil

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6661
Author(s):  
Vladimir Anatolyevich Markov ◽  
Bowen Sa ◽  
Sergey Nikolaevich Devyanin ◽  
Anatoly Anatolyevich Zherdev ◽  
Pablo Ramon Vallejo Maldonado ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Rapeseed Oil ◽  
Characteristic Curve ◽  
Motor Fuel ◽  
Experimental Tests ◽  
Operating Conditions ◽  
Test Results ◽  
Cfd Simulations ◽  
Brake Thermal Efficiency ◽  
Flow Simulations

The article discusses the possibility of using blended biofuels from rapeseed oil (RO) as fuel for a diesel engine. RO blended diesel fuel (DF) and emulsified multicomponent biofuels have been investigated. Fuel physicochemical properties have been analyzed. Experimental tests of a diesel engine D-245 in the operating conditions of the external characteristic curve and the 13-mode test cycle have been conducted to investigate the effect of these fuels on engine performances. CFD simulations of the nozzle inner flow were performed for DF and ethanol-emulsified RO. The possibility of a significant improvement in brake thermal efficiency of the engine has been noted. The efficiency of using blended biofuels from RO as a motor fuel for diesel engines has been evaluated based on the experimental test results. It was shown that in comparison with the presence of RO in emulsified multicomponent biofuel, the presence of water has a more significant effect on NOx emission reduction. The content of RO and the content of water in the investigated emulsified fuels have a comparable influence on exhaust smoke reduction. Nozzle inner flow simulations show that the emulsification of RO changes its flow behaviors and cavitation regime.

CAE Correlation of Sealing Pressure of a Press-in-Place Gasket

2021 ◽  
Keyword(s):  
Internal Pressure ◽  
Pressure Distribution ◽  
Load Condition ◽  
Experimental Tests ◽  
Operating Conditions ◽  
Test Results ◽  
Local Pressure ◽  
Cross Sectional ◽  
Pad Test ◽  
Sealing Pressure

The Press-in-Place (PIP) gasket is a static face seal with self-retaining feature, which is used for the mating surfaces of engine components to maintain the reliability of the closed system under various operating conditions. Its design allows it to provide enough contact pressure to seal the internal fluid as well as prevent mechanical failures. Insufficient sealing pressure will lead to fluid leakage, consequently resulting in engine failures. A test fixture was designed to simulate the clamp load and internal pressure condition on a gasket bolted joint. A Sensor pad using TEKSCAN equipment was used to capture the overall and local pressure distribution of the PIP gasket under various engine loading conditions. Then, the Sensor pad test results were compared with simulated CAE results from computer models. Through the comparisons, it is found that the gasket sealing pressure of test data and CAE data show good correlation for bolt load condition 500N when compared to internal pressure side load condition of 0.138 MPa & 0.276 MPa. Moreover, the gasket cross-sectional pressure distribution obtained by experimental tests and CAE models correlated very well with R2 ranging from 90 to 99% for all load cases. Both CAE and Sensor pad test results shows increase in sealing pressure when internal side pressure is applied to the gasket seal.

Influence of Underbody Suspended Equipment on Rail Ride Comfort

2014 ◽  
Author(s):  
Roberto Corradi ◽  
Laura Mazzola ◽  
Francesco Ripamonti ◽  
Lorenzo Rosa
Keyword(s):  
Laboratory Test ◽  
Ride Comfort ◽  
Experimental Tests ◽  
Negative Influence ◽  
Point Of View ◽  
Operating Conditions ◽  
Elastic Behaviour ◽  
Test Results ◽  
Laboratory Test Results ◽  
The Common

This paper illustrates a methodology that, by means of laboratory and on-track tests, allows for an appropriate design of the connection elements between the suspended equipment and the carbody in order to enhance the rail ride comfort. In particular at first the connection elements are tested in laboratory to assess their visco-elastic behaviour simulating the common operating conditions. Subsequently on-track tests and experimental modal analysis are carried out to identify the interaction between underframe equipment motions and carbody modes. In the experimental tests, starting from the laboratory test results, it is possible to define the connection elements in order to minimise the negative influence on vehicle ride comfort. Two different solutions are proposed: the “TMD solution” (the suspension is tuned on the natural frequency of the carbody mode most relevant from the comfort point of view) and the “suspended solution” (the suspension system aims to decouple the two subsystems).

scholarly journals Comprehensive Parameters Identification and Dynamic Model Validation of Interior-Mount Line-Start Permanent Magnet Synchronous Motors

Machines ◽  
2019 ◽  
Vol 7 (1) ◽  
pp. 4 ◽  
Author(s):  
Luqman S. Maraaba ◽  
Zakariya M. Al-Hamouz ◽  
Abdulaziz S. Milhem ◽  
Ssennoga Twaha
Keyword(s):  
Mathematical Model ◽  
Permanent Magnet ◽  
High Efficiency ◽  
Experimental Tests ◽  
Induction Machines ◽  
Test Methods ◽  
Operating Conditions ◽  
Test Method ◽  
Permanent Magnet Synchronous Motors ◽  
Synchronous Motors

The application of line-start permanent magnet synchronous motors (LSPMSMs) is rapidly spreading due to their advantages of high efficiency, high operational power factor, being self-starting, rendering them as highly needed in many applications in recent years. Although there have been standard methods for the identification of parameters of synchronous and induction machines, most of them do not apply to LSPMSMs. This paper presents a study and analysis of different parameter identification methods for interior mount LSPMSM. Experimental tests have been performed in the laboratory on a 1-hp interior mount LSPMSM. The measurements have been validated by investigating the performance of the machine under different operating conditions using a developed qd0 mathematical model and an experimental setup. The dynamic and steady-state performance analyses have been performed using the determined parameters. It is found that the experimental results are close to the mathematical model results, confirming the accuracy of the studied test methods. Therefore, the output of this study will help in selecting the proper test method for LSPMSM.

On axial compressive behavior of steel fiber reinforced concrete confined by FRP

2021 ◽  
pp. 136943322098165
Author(s):  
Hossein Saberi ◽  
Farzad Hatami ◽  
Alireza Rahai
Keyword(s):  
Reinforced Concrete ◽  
Experimental Test ◽  
Steel Fiber ◽  
Experimental Tests ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Test Results ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Frp Confinement

In this study, the co-effects of steel fibers and FRP confinement on the concrete behavior under the axial compression load are investigated. Thus, the experimental tests were conducted on 18 steel fiber-reinforced concrete (SFRC) specimens confined by FRP. Moreover, 24 existing experimental test results of FRP-confined specimens tested under axial compression are gathered to compile a reliable database for developing a mathematical model. In the conducted experimental tests, the concrete strength was varied as 26 MPa and 32.5 MPa and the steel fiber content was varied as 0.0%, 1.5%, and 3%. The specimens were confined with one and two layers of glass fiber reinforced polymer (GFRP) sheet. The experimental test results show that simultaneously using the steel fibers and FRP confinement in concrete not only significantly increases the peak strength and ultimate strain of concrete but also solves the issue of sudden failure in the FRP-confined concrete. The simulations confirm that the results of the proposed model are in good agreement with those of experimental tests.

scholarly journals Sensitivity Analysis of OTEC-CC-MX-1 kWe Plant Prototype

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2585
Author(s):  
Jessica Guadalupe Tobal-Cupul ◽  
Estela Cerezo-Acevedo ◽  
Yair Yosias Arriola-Gil ◽  
Hector Fernando Gomez-Garcia ◽  
Victor Manuel Romero-Medina
Keyword(s):  
Sensitivity Analysis ◽  
Experimental Tests ◽  
Caribbean Sea ◽  
Ocean Model ◽  
Operating Conditions ◽  
Working Fluid ◽  
Ocean Energy ◽  
Mexican Caribbean ◽  
Water Temperature Data ◽  
Mass Flows

The Mexican Caribbean Sea has potential zones for Ocean Thermal Energy Conversion (OTEC) implementation. Universidad del Caribe and Instituto de Ciencias del Mar y Limnologia, with the support of the Mexican Centre of Innovation in Ocean Energy, designed and constructed a prototype OTEC plant (OTEC-CC-MX-1 kWe), which is the first initiative in Mexico for exploitation of this type of renewable energy. This paper presents a sensitivity analysis whose objective was to know, before carrying out the experimental tests, the behavior of OTEC-CC-MX-1 kWe regarding temperature differences, as well as the non-possible operating conditions, which allows us to assess possible modifications in the prototype installation. An algorithm was developed to obtain the inlet and outlet temperatures of the water and working fluid in the heat exchangers using the monthly surface and deep-water temperature data from the Hybrid Coordinate Ocean Model and Geographically Weighted Regression Temperature Model for the Mexican Caribbean Sea. With these temperatures, the following were analyzed: fluctuation of thermal efficiency, mass flows of R-152a and water and power production. By analyzing the results, we verified maximum and minimum mass flows of water and R-152a to produce 1 kWe during a typical year in the Mexican Caribbean Sea and the conditions when the production of electricity is not possible for OTEC-CC-MX-1 kWe.

The analysis on the influence of mixed sliding-rolling motion mode to precision degradation of ball screw

2021 ◽  
pp. 095440622098201
Author(s):  
Qiang Cheng ◽  
Baobao Qi ◽  
Hongyan Chu ◽  
Ziling Zhang ◽  
Zhifeng Liu ◽  
...  
Keyword(s):  
Structural Parameters ◽  
Experimental Tests ◽  
Theoretical Models ◽  
Operating Conditions ◽  
Ball Screw ◽  
Rolling Motion ◽  
Degradation Model ◽  
Sliding Motion ◽  
Factors Analysis ◽  
Motion Mode

The combination of sliding/rolling motion can influence the degree of precision degradation of ball screw. Precision degradation modeling and factors analysis can reveal the evolution law of ball screw precision. This paper presents a precision degradation model for factors analysis influencing precision due to mixed sliding-rolling motion. The precision loss model was verified through the comparison of theoretical models and experimental tests. The precision degradation due to rolling motion between the ball and raceway accounted for 29.09% of the screw precision loss due to sliding motion. Additionally, the total precision degradation due to rolling motion accounted for 21.03% of the total sliding precision loss of the screw and nut, and 17.38% of the overall ball screw precision loss under mixed sliding-rolling motion. In addition, the effects of operating conditions and structural parameters on precision loss were analyzed. The sensitivity coefficients of factors influencing were used to quantitatively describe impact degree on precision degradation.

Hysteresis loss of ultra-large off-the-road tire rubber compounds based on operating conditions at mine sites

2021 ◽  
pp. 095440702110155
Author(s):  
Shaosen Ma ◽  
Guangping Huang ◽  
Khaled Obaia ◽  
Soon Won Moon ◽  
Wei Victor Liu
Keyword(s):  
Large Strain ◽  
Tensile Tests ◽  
Operating Conditions ◽  
Hysteresis Loss ◽  
Strain Rates ◽  
Test Results ◽  
Tire Rubber ◽  
The Road ◽  
Rubber Compounds ◽  
Mine Sites

The objective of this study is to investigate the hysteresis loss of ultra-large off-the-road (OTR) tire rubber compounds based on typical operating conditions at mine sites. Cyclic tensile tests were conducted on tread and sidewall compounds at six strain levels ranging from 10% to 100%, eight strain rates from 10% to 500% s−1 and 14 rubber temperatures from −30°C to 100°C. The test results showed that a large strain level (e.g. 100%) increased the hysteresis loss of tire rubber compounds considerably. Hysteresis loss of tire rubber compounds increased with a rise of strain rates, and the increasing rates became greater at large strain levels (e.g. 100%). Moreover, a rise of rubber temperatures caused a decrease in hysteresis loss; however, the decrease became less significant when the rubber temperatures were above 10°C. Compared with tread compounds, sidewall compounds showed greater hysteresis loss values and more rapid increases in hysteresis loss with the rising strain rate.

scholarly journals Different Techniques to Mitigate Partial Shading in Photovoltaic Panels

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3863
Author(s):  
Tiago Alves ◽  
João Paulo N. Torres ◽  
Ricardo A. Marques Lameirinhas ◽  
Carlos A. F. Fernandes
Keyword(s):  
Cell Model ◽  
Research Work ◽  
Experimental Tests ◽  
Operating Conditions ◽  
Pv System ◽  
Partial Shading ◽  
System Architectures ◽  
Pv Systems ◽  
Advantages And Disadvantages ◽  
Pv Panel

The effect of partial shading in photovoltaic (PV) panels is one of the biggest problems regarding power losses in PV systems. When the irradiance pattern throughout a PV panel is inequal, some cells with the possibility of higher power production will produce less and start to deteriorate. The objective of this research work is to present, test and discuss different techniques to help mitigate partial shading in PV panels, observing and commenting the advantages and disadvantages for different PV technologies under different operating conditions. The motivation is to contribute with research, simulation, and experimental work. Several state-of-the-artsolutions to the problem will be presented: different topologies in the interconnection of the panels; different PV system architectures, and also introducing new solution hypotheses, such as different cell interconnections topologies. Alongside, benefits and limitations will be discussed. To obtain actual results, the simulation work was conducted by creating MATLAB/Simulink models for each different technique tested, all centered around the 1M5P PV cell model. The several techniques tested will also take into account different patterns and sizes of partial shading, different PV panel technologies, different values of source irradiation, and different PV array sizes. The results will be discussed and validated by experimental tests.

Sign in / Sign up

Export Citation Format

Share Document