scholarly journals X-ray Micro-Computed Tomography: A Powerful Device to Analyze the 3D Microstructure of Anode-Electrolyte in BaZr0.8Y0.2O3 Protonic Ceramic Electrochemical Cells and the Reduction Behavior

Membranes ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 68
Author(s):  
Victoire Lescure ◽  
Morgane Gelin ◽  
Mélanie François ◽  
Mohammad Arab Pour Yazdi ◽  
Pascal Briois ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Tape Casting ◽  
Annealing Treatment ◽  
Proton Conductors ◽  
Electrochemical Cells ◽  
Micro Computed Tomography ◽  
Cross Sectional ◽  
Reduction Behavior ◽  
Shaping Process ◽  
Advanced Fuel

New advanced fuel cell technologies are moving towards high-temperature proton conductors (HTPCs) to meet environmental issues. Their elaboration remains a challenge and micro-computed tomography (µCT) is an innovative way to control their quality. NiO-BZY anodic supports of a protonic ceramic electrochemical cell (PCEC), elaborated by co-tape casting and co-sintered at 1350 °C, were coated with a BZY20 electrolyte layer by DC magnetron sputtering. The µCT allowed to observe defects inside the volume of these PCEC half-cells and to show their evolution after an annealing treatment at 1000 °C and reduction under hydrogen. This technique consists in obtaining a 3D reconstruction of all the cross-sectional images of the whole sample, slice by slice. This allows seeing inside the sample at any desired depth. The resolution of 0.35 µm is perfectly adapted to this type of problem considering the thickness of the different layers of the sample and the size of the defects. Defects were detected, and their interpretation was possible thanks to the 3D view, such as the phenomenon of NiO grain enlargement explaining defects in the electrolyte, the effect of NiO reduction, and finally, some anomalies due to the shaping process. Ways to anticipate these defects were then proposed.

Analysis of yarn fiber volume fraction in textile composites using scanning electron microscopy and X-ray micro-computed tomography

2018 ◽  
Vol 38 (5) ◽  
pp. 199-210 ◽  
Author(s):  
Xiu-Wei Yu ◽  
Hao Wang ◽  
Zhong-Wei Wang
Keyword(s):  
Electron Microscopy ◽  
Computed Tomography ◽  
Scanning Electron Microscopy ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Textile Composites ◽  
Micro Computed Tomography ◽  
Fiber Volume ◽  
Cross Sectional ◽  
Scanning Electron

Variation of yarn fiber volume fraction, induced by the compression between adjacent yarns during the manufacturing process of textile composites, is difficult to be determined by using a single imaging method. A method combining scanning electron microscopy and micro-computed tomography is proposed to quantify the variation of yarn fiber volume fraction of textile composites, which is decomposed into systematic trend and stochastic deviation. The method takes the advantages of high resolution of scanning electron microscopy and wide 3D view of micro-computed tomography. Average fiber cross-sectional areas are acquired by analyzing hundreds of fiber cross-sectional areas in scanning electron microscopic images. Yarn cross-sectional area is determined by fitting ellipse to the labeled yarn cross-section in slices of micro-computed tomography images. The results of E-glass/epoxy and carbon/epoxy specimens show that their systematic trends of yarn fiber volume fraction combined with standard deviations of stochastic deviation, relative to the respective global means, fluctuate between [−11.4%, 15.3%] and [−12.9%, 10.7%], respectively. Yarn FVF varies in specimen obviously and needs to be considered in mechanical property prediction.

scholarly journals Micro-computed tomography: A novel diagnostic technique for the evaluation of gastrointestinal specimens

2021 ◽  
Vol 09 (12) ◽  
pp. E1886-E1889
Author(s):  
Noboru Kawata ◽  
Alexei Teplov ◽  
Peter Ntiamoah ◽  
Jinru Shia ◽  
Meera Hameed ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Three Dimensional ◽  
Diagnostic Technique ◽  
Human Colon ◽  
Ffpe Tissue ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Cross Sectional ◽  
Tissue Samples ◽  
Formalin Fixed Paraffin Embedded

AbstractMicro-computed tomography (micro-CT) is a non-destructive modality that can be used to obtain high-resolution three-dimensional (3 D) images of the whole sample tissue; the usefulness of micro-CT has been reported for evaluation of breast cancer and lung cancer. However, this novel diagnostic technique has never been used for evaluating endoscopically resected gastrointestinal specimens. In the present study, we scanned 13 formalin-fixed paraffin-embedded (FFPE) tissue blocks of a normal human colon and gastric tissue samples using micro-CT. The evaluation comprised a comparison of the acquired whole block images with the images of the corresponding cross-sectional slice of the hematoxylin and eosin-stained slide. Micro-CT was able to produce images of the whole sample and clearly depict tissues such as glandular structures, muscularis mucosae, and blood vessels in the FFPE tissue blocks of normal gastrointestinal samples. Furthermore, the 3 D reconstructed could be used to create a cross-sectional image and reflected the surface structure of samples obtained from any site. Micro-CT has the potential to become a highly promising pathological diagnostic assistance tool for endoscopically resected gastrointestinal specimens in combination with conventional microscopic examination.

scholarly journals Quantitative Analysis of the Anatomy of Mesial Roots of Mandibular First Molars with Vertucci Type I Root Canal Configuration by Means of Micro-Computed Tomography

2020 ◽  
Vol 10 (1) ◽  
pp. 17-21
Author(s):  
Ali Keleş ◽  
Cangül Keskin
Keyword(s):  
Computed Tomography ◽  
Quantitative Analysis ◽  
Root Canal ◽  
Visual Analysis ◽  
Descriptive Analysis ◽  
Type I ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Cross Sectional ◽  
Root Canals

Aim:  This study aimed to evaluate root canal morphology of Vertucci type I root canal configuration detected in mesial roots of mandibular first molar teeth using micro-computed tomography (Micro-CT). Methodology: Micro-CT datasets of 269 specimens were evaluated for the detection of specimens with Vertucci type I root canal configuration for further analysis. Major and minor diameter, area, perimeter and roundness of root canal cross-sections at the beginning and midline of each root thirds were measured and recorded. The presence of apical delta, accessory canals, and deviation of major apical foramen from anatomical apex were investigated. Data was analyzed using descriptive analysis, ANOVA-Tukey and Kruskal-Wallis H-Wilcoxon signed-rank tests. Results: Vertucci type I canal configuration was present in the 4.46% of the specimens. The specimens often showed accessory root canals (50%) and apical deltas (41,6%). From the visual analysis of the 3D and 2D images, significant differences were detected among coronal, middle and apical thirds of the specimens regarding major and minor diameter, area, perimeter and roundness (P < 0.05). Conclusion: Three- and two-dimensional analyses of mesial roots with Vertucci type I canal configuration indicated that this type of configuration presents large buccolingual diameters with long oval shape and has isthmus at coronal and middle thirds. At the apical third the root canals often terminate in an oval cross sectional shape.   How to cite this article: Keles A, Keskin C. Quantitative analysis of the anatomy of mesial roots of mandibular first molars with Vertucci type I root canal configuration by means of micro-computed tomography. Int Dent Res 2020;10(1):17-21. https://doi.org/10.5577/intdentres.2020.vol10.no1.4   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

Evaluation of Pore Architecture in Hydroxyapatite/Collagen Scaffold Using Micro Computed Tomography

2006 ◽  
Vol 309-311 ◽  
pp. 1091-1094
Author(s):  
Shunji Yunoki ◽  
Toshiyuki Ikoma ◽  
Akira Monkawa ◽  
Kazushi Ohta ◽  
Masanori Kikuchi ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Composite Scaffold ◽  
Vertical Direction ◽  
Growth Direction ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Cross Sectional ◽  
Dry Process ◽  
Ice Growth ◽  
Pore Architecture

Hydroxyapatite/collagen (HAp/Col) composite scaffold with unidirectionally elongated pores (scaffold-U) was fabricated by the unidirectional solidification with ice growth and subsequent freeze-dry process. The pore architecture in the composite was evaluated by using scanning electron microscopy (SEM) and micro computed tomography (micro-CT) with a high resolution. The SEM observation showed that the scaffold-U had unidirectional pores elongated along the vertical direction (i.e. ice growth direction), however the horizontal cross-section showed quite different pore morphology: spindle-shaped pores with random direction. The 3-D micro-CT image of the scaffold-U simultaneously showed the microstructure of the unidirectionally elongated pore and the cross-sectional pore, indicating that the interconnected micropores were successfully fabricated along the ice growth direction. The micro-CT is a powerful tool for the visualization of 3-D pore structure.

Computed Tomography Angiography (CTA) Evaluation of Spontaneous Subarachnoid Hemorrhage

2020 ◽  
Vol 6 (2) ◽  
pp. 78-81
Author(s):  
Md Tauhidul Islam Chowdhury ◽  
Mohammad Shah Jahirul Hoque Chowdhury ◽  
Mohammad Sadekur Rahman Sarkar ◽  
KM Ahasan Ahmed ◽  
Md Nazmul Kabir ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Subarachnoid Hemorrhage ◽  
Computed Tomography Angiography ◽  
Cross Sectional Study ◽  
Sectional Study ◽  
Cross Sectional ◽  
Multiple Aneurysm ◽  
Traumatic Subarachnoid Hemorrhage ◽  
One Year ◽  
Spontaneous Subarachnoid Hemorrhage

Background: In evaluation of non-traumatic subarachnoid hemorrhage CT angiography (CTA) has 97-98% sensitivity and near 100% specificity. Objective: This study was conducted to evaluate the CTA findings of CT positive non traumatic subarachnoid hemorrhage. Methodology: This is an observational cross sectional study performed in Neurology department of National Institute of Neurosciences and Hospital, Dhaka over one year period (January 2019 to December 2019). Total 87 CT positive subarachnoid hemorrhage cases were purposively included in this study. All CT positive patients underwent CTA of Cerebral vessels for further evaluation. The angiography were evaluated by competent neuro-radiologists blinded about the study. Result: Among 87 patients, 40.2% were male and 59.8% were female. The average age was 53.33±11.1 years. Among the studied patient the source of bleeding was found 78.16% aneurysmal and 21.84% non-aneurysmal. 85.30% patients had single aneurysm and 14.70% had multiple aneurysm. The highest number of patient had Acom aneurysm (41.17%) followed by MCA (22.05%), ICA (13.23%), ACA (7.35%) and vertebral artery (1.14%) in order of frequency. Among the multiple aneurysm group most of the patients had combination of Acom, MCA and ICA aneurysm. Conclusion: From this study, we can conclude that CTA can be used as the primary diagnostic tool in evaluation of spontaneous SAH. Journal of National Institute of Neurosciences Bangladesh, 2020;6(2): 78-81

Cortical and trabecular bone parameters from HR-Pqct images at the Tibia: a local comparison with synchrotron radiation micro-computed tomography

2013 ◽  
Author(s):  
Agnes Ostertag ◽  
Francoise Peyrin ◽  
Sylvie Fernandez ◽  
Jean-Denis Laredo ◽  
Vernejoul Marie-Christine De ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Synchrotron Radiation ◽  
Trabecular Bone ◽  
Micro Computed Tomography ◽  
Bone Parameters ◽  
Local Comparison

Morphology and Affinities of Ampelocissites Seeds (Vitaceae: Ampelopsis clade) from the Paleogene of Texas, USA

2020 ◽  
Vol 45 (3) ◽  
pp. 478-482
Author(s):  
Steven R. Manchester
Keyword(s):  
Computed Tomography ◽  
Cross Sections ◽  
Seed Coat ◽  
Ct Scanning ◽  
Seed Morphology ◽  
Early Eocene ◽  
Micro Computed Tomography ◽  
X Ray ◽  
Fossil Seeds ◽  
Fossil Genus

Abstract—The type material on which the fossil genus name Ampelocissites was established in 1929 has been reexamined with the aid of X-ray micro-computed tomography (μ-CT) scanning and compared with seeds of extant taxa to assess the relationships of these fossils within the grape family, Vitaceae. The specimens were collected from a sandstone of late Paleocene or early Eocene age. Although originally inferred by Berry to be intermediate in morphology between Ampelocissus and Vitis, the newly revealed details of seed morphology indicate that these seeds represent instead the Ampelopsis clade. Digital cross sections show that the seed coat maintains its thickness over the external surfaces, but diminishes quickly in the ventral infolds. This feature, along with the elliptical chalaza and lack of an apical groove, indicate that Ampelocissites lytlensis Berry probably represents Ampelopsis or Nekemias (rather than Ampelocissus or Vitis) and that the generic name Ampelocissites may be useful for fossil seeds with morphology consistent with the Ampelopsis clade that lack sufficient characters to specify placement within one of these extant genera.

Sign in / Sign up

Export Citation Format

Share Document