scholarly journals Comparative Study of the Performances of Al(OH)3 and BaSO4 in Ultrafine Powder Coatings

Processes ◽  
2019 ◽  
Vol 7 (5) ◽  
pp. 316 ◽  
Author(s):  
Weihong Li ◽  
Diego Cárdenas Franco ◽  
Marshall Shuai Yang ◽  
Xinping Zhu ◽  
Haiping Zhang ◽  
...  
Keyword(s):  
High Surface ◽  
Expansion Ratio ◽  
Ultrafine Powder ◽  
Angle Of Repose ◽  
Organic Polymer ◽  
Inorganic Filler ◽  
Differential Scanning Calorimetric ◽  
Powder Coatings ◽  
Coating Films ◽  
The Impact

Ultrafine powder coatings are one of the development directions in the powder coating industry, as they can achieve thin coatings with good leveling and high surface smoothness comparable to liquid coatings. Compared to regular coatings, they experience a higher sensitivity to any incompatibilities, e.g., filler from coating components. The properties of fillers play a great role in the performance of coating films. Aluminum trihydrate (Al(OH)3) is a well-known filler in solvent-based coatings and other polymer industries. To study and evaluate the performances of Al(OH)3 in ultrafine powder coatings, a popular filler, barium sulfate (BaSO4) is used for comparison. Both fillers are added in ultrafine powder coatings based on two of the most commonly used resin systems (polyester-epoxy and polyester). The differences of physical and chemical properties between both fillers have significant influences on several properties of powder paints and coating films. The polar groups (hydrogen bond) in Al(OH)3 result in the strong interaction between inorganic filler and organic polymer matrix, thus decreasing the molecular network mobility and influencing the chain formation, which is verified by differential scanning calorimetric (DSC). The bed expansion ratio (BERs) of powder paints incorporated with Al(OH)3 are much higher than those with BaSO4, which indicate more uniform gas-solid contact during the spraying process. Samples with Al(OH)3 exhibit much lower specular gloss at 60°, which are expected to achieve remarkable matting effects. Superior corrosion resistances can be observed for almost all the coated panels incorporated with Al(OH)3 in contrast to those with BaSO4. Other aspects are slightly influenced by the difference between the two fillers, such as the angle of repose values (AORs) of powder paints, the impact resistance and flexibility of coating films.

scholarly journals Investigation of the Performance of ATH Powders in Organic Powder Coatings

Coatings ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 110 ◽  
Author(s):  
Weihong Li ◽  
Diego Franco ◽  
Marshall Yang ◽  
Xinping Zhu ◽  
Haiping Zhang ◽  
...  
Keyword(s):  
Impact Resistance ◽  
Angle Of Repose ◽  
Uv Resistance ◽  
Powder Coatings ◽  
Slight Effect ◽  
Coating Films ◽  
Scratch Hardness ◽  
Hardness Increase ◽  
Initial Resistance ◽  
Resistance Performance

Aluminum trihydrate (ATH) is one of the most widely used fillers in solvent-borne coatings and polymer industries. To investigate its performance in powder coatings, four different pigment to binder ratios (P/B) were used in respect to different ATH concentrations in four most widely used resin systems (epoxy, epoxy-polyester, polyurethane and polyester). The angle of repose (AOR) and specific gravity of powder paints increase accordingly with ATH concentration. The mechanical properties, corrosion and UV resistance performances of coating films are enhanced or only slightly decreased with the addition of ATH. Pencil scratch hardness increase significantly with the increase of ATH content. Impact resistance decreases within 5% of the initial resistance at the maximum ATH loading. There is a slightly decrease in corrosion resistance performances of less than 2 mm of failure at scribe in all formulations. The incorporation of ATH has slight effect on the UV resistance performance of all the samples. Moreover, the matting effect of ATH is observed for all the resin systems, especially epoxy, with the specular gloss decreasing more than 70% at P/B of 0.75.

Influence of temperature and humidity on the angle of repose of wood bulk materials

2016 ◽  
Author(s):  
И.В. Бачериков ◽  
Б.М. Локштанов
Keyword(s):  
Field Experiments ◽  
Bulk Material ◽  
Average Particle Size ◽  
Operating Conditions ◽  
Angle Of Repose ◽  
Wood Dust ◽  
Average Particle ◽  
Bulk Materials ◽  
Technical Literature ◽  
The Impact

При проектировании открытых и закрытых хранилищ измельченных сыпучих материалов древесных материалов, таких как щепа и опилки, большое значение имеет угол естественного откоса (статический и динамический) этих материалов. В технической литературе приводятся противоречивые сведения о величине этих углов, что приводит к ошибкам при проектировании складов. В справочных данных не учитываются условия, в которых эксплуатируются емкости для хранения сыпучих материалов, свойства и состояние этих сыпучих материалов. В свою очередь, ошибки при проектировании приводят к проблемам (зависание, сводообразование, «затопление» и т. д.) и авариям при эксплуатации бункеров и силосов на производстве. В статье представлены сведения, посвященные влиянию влажности и температуры на угол естественного откоса сыпучих материалов. На основании лабораторных и натурных экспериментов, проведенных с помощью специально разработанных методик и установок, была скорректирована формула для определения углов естественного откоса (статического и динамического) для измельченных древесных материалов в зависимости от их фракционного и породного состава, влажности (абсолютной и относительной) и температуры. При помощи скорректированной формулы можно определить угол естественного откоса древесных сыпучих материалов со среднегеометрическим размером частицы от 0,5 мм до 15 мм (от древесной пыли до технологической щепы) в различных производственных условиях. Статья может быть полезна проектировщикам при расчете угла наклона граней выпускающей воронки бункеров и силосов предприятий лесной отрасли и целлюлозо-бумажной промышленности. In the design of open and closed storage warehouses chopped wood materials for bulk materials such as wood chips and sawdust, great importance has an angle of repose (static and dynamic) of these materials. In the technical literature are conflicting reports about the magnitude of these angles, which leads to errors in the design of warehouses. In the referencesdoes not take into account the conditions under which operated capacities for storage of bulk materials, and properties and condition of the bulk material. The design errors lead to problems (hanging, arching, «flooding», etc.) and accidents in the operation of hoppers and silos at the mills. The article provides information on the impact of humidity and temperature on the angle of repose of granular materials. On the basis of laboratory and field experiments, conducted with the help of specially developed techniques and facilities has been adjusted formula for determining the angle of repose (static and dynamic) for the shredded wood materials depending on their fractional and species composition, humidity (absolute and relative) and temperature. It is possible, by using the corrected formula, to determine the angle of repose of loose wood materials with average particle size of from 0.5 mm to 15 mm (wood dust to pulpchips) in various operating conditions. The article can be helpful to designers in the calculation of the angle of inclination of the funnel faces produces bunkers and silos forest industries and pulp and paper industry.

scholarly journals The Impact of Gelatin on the Pharmaceutical Characteristics of Fucoidan Microspheres with Posaconazole

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4087
Author(s):  
Marta Szekalska ◽  
Aleksandra Citkowska ◽  
Magdalena Wróblewska ◽  
Katarzyna Winnicka
Keyword(s):  
Antifungal Activity ◽  
Drug Release ◽  
Spray Drying ◽  
Fungal Infections ◽  
Drug Loading ◽  
High Surface ◽  
Vaginal Fluid ◽  
Sustained Drug Release ◽  
Candida Spp ◽  
The Impact

Fungal infections and invasive mycoses, despite the continuous medicine progress, are an important globally therapeutic problem. Multicompartment dosage formulations (e.g., microparticles) ensure a short drug diffusion way and high surface area of drug release, which as a consequence can provide improvement of therapeutic efficiency compared to the traditional drug dosage forms. As fucoidan is promising component with wide biological activity per se, the aim of this study was to prepare fucospheres (fucoidan microparticles) and fucoidan/gelatin microparticles with posaconazole using the one-step spray-drying technique. Pharmaceutical properties of designed fucospheres and the impact of the gelatin addition on their characteristics were evaluated. An important stage of this research was in vitro evaluation of antifungal activity of developed microparticles using different Candida species. It was observed that gelatin presence in microparticles significantly improved swelling capacity and mucoadhesiveness, and provided a sustained POS release. Furthermore, it was shown that gelatin addition enhanced antifungal activity of microparticles against tested Candida spp. strains. Microparticles formulation GF6, prepared by the spray drying of 20% fucoidan, 5% gelatin and 10% Posaconazole, were characterized by optimal mucoadhesive properties, high drug loading and the most sustained drug release (after 8 h 65.34 ± 4.10% and 33.81 ± 5.58% of posaconazole was dissolved in simulated vaginal fluid pH 4.2 or 0.1 M HCl pH 1.2, respectively).

scholarly journals A process-based method for predicting lateral erosion rates

2021 ◽  
Author(s):  
Myron van Damme
Keyword(s):  
Soil Mechanics ◽  
High Surface ◽  
Shear Stresses ◽  
Empirical Equations ◽  
Predictive Capability ◽  
Surface Shear ◽  
Erosion Rates ◽  
Material Texture ◽  
Empirical Coefficients ◽  
The Impact

AbstractAn accurate means of predicting erosion rates is essential to improve the predictive capability of breach models. During breach growth, erosion rates are often determined with empirical equations. The predictive capability of empirical equations is governed by the range for which they have been validated and the accuracy with which empirical coefficients can be established. Most empirical equations thereby do not account for the impact of material texture, moisture content, and compaction energy on the erosion rates. The method presented in this paper acknowledges the impact of these parameters by accounting for the process of dilation during erosion. The paper shows how, given high surface shear stresses, the erosion rate can be quantified by applying the principles of soil mechanics. Key is thereby to identify that stress balance situation for which the dilatency induced inflow gives a maximum averaged shear resistance. The effectiveness of the model in predicting erosion rates is indicated by means of three validation test cases. A sensitivity analysis of the method is also provided to show that the predictions lie within the range of inaccuracy of the input parameters.

Effect of inorganic nanofillers on the impact behavior and fracture probability of industrial high-density polyethylene nanocomposite

2017 ◽  
Vol 52 (18) ◽  
pp. 2431-2442 ◽  
Author(s):  
Harun Sepet ◽  
Necmettin Tarakcioglu ◽  
RDK Misra
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Density Polyethylene ◽  
Fracture Probability ◽  
High Density ◽  
Impact Behavior ◽  
Inorganic Filler ◽  
Melt Mixing ◽  
The Impact ◽  
Scanning Electron

The main purpose of this work is to study how the morphology of nanofillers and dispersion and distribution level of inorganic nanofiller influence the impact behavior and fracture probability of inorganic filler filled industrial high-density polyethylene nanocomposites. For this study, nanoclay and nano-CaCO3 fillers–high-density polyethylene mixings (0, 1, 3, 5 wt.% high-density polyethylene) was prepared by melt-mixing method using a compounder system. The impact behavior was examined by charpy impact test, scanning electron microscopy, and probability theory and statistics. The level of the dispersion was characterized with scanning electron microscopy energy dispersive X-ray spectroscopy analysis. The results showed rather good dispersion of both of inorganic nanofiller, with a mixture of exfoliated and confined morphology. The results indicated that the impact strength of the industrial nanocomposite decreased with the increase of inorganic particulate content. The impact reliability of the industrial nanocomposites depends on the type of nanofillers and their dispersion and distribution in the matrix.

Tailored Mesoporous Silicas: From Confinement Effects to Catalysis

2009 ◽  
Vol 1217 ◽  
Author(s):  
A. C. Buchanan, III ◽  
Michelle K. Kidder
Keyword(s):  
Chemical Reactivity ◽  
High Surface ◽  
High Surface Area ◽  
Mesoporous Silicas ◽  
Surface Immobilization ◽  
Product Selectivity ◽  
Aryl Ether ◽  
Ether Linkage ◽  
Synthetic Methodologies ◽  
The Impact

AbstractOrdered mesoporous silicas continue to find widespread use as supports for diverse applications such as catalysis, separations, and sensors. They provide a versatile platform for these studies because of their high surface area and the ability to control pore size, topology, and surface properties over wide ranges. Furthermore, there is a diverse array of synthetic methodologies for tailoring the pore surface with organic, organometallic, and inorganic functional groups. In this paper, we will discuss two examples of tailored mesoporous silicas and the resultant impact on chemical reactivity. First, we explore the impact of pore confinement on the thermochemical reactivity of phenethyl phenyl ether (PhCH2CH2OPh, PPE), which is a model of the dominant β-aryl ether linkage present in lignin derived from woody biomass. The influence of PPE surface immobilization, grafting density, silica pore diameter, and presence of a second surface-grafted inert “spacer” molecule on the product selectivity has been examined. We will show that the product selectivity can be substantially altered compared with the inherent gas-phase selectivity. Second, we have recently initiated an investigation of mesoporous silica supported, heterobimetallic oxide materials for photocatalytic conversion of carbon dioxide. Through surface organometallic chemistry, isolated M-O-M’ species can be generated on mesoporous silicas that, upon irradiation, form metal to metal charge transfer bands capable of converting CO2 into CO. Initial results from studies of Ti(IV)-O-Sn(II) on SBA-15 will be presented.

Investigation of Droplet Impinging on a Heated Porous Surface Under Various Working Conditions; A Mathematical Modeling

2021 ◽  
pp. 2150015
Author(s):  
Mohammad Azadeh ◽  
Hamidreza Khakrah
Keyword(s):  
Droplet Diameter ◽  
High Surface ◽  
Adaptive Method ◽  
Porous Surface ◽  
Droplet Temperature ◽  
Surface Porosity ◽  
Two Phase ◽  
Air Interface ◽  
Accuracy Of Results ◽  
The Impact

This study numerically investigated the behavior of a Newtonian droplet impacting a heated porous surface. In this regard, a two-phase finite volume code was used for laminar flow. The time adaptive method was applied to enhance the accuracy of results and better convergence of the solving process. Also, the dynamic grid adaptation technique was adopted to predict the liquid-air interface precisely. The results were first validated against experimental data at different Weber numbers. Then the effect of variations in the droplet temperature was investigated on the spreading factor. The obtained results revealed that the rise in droplet temperature led to an increase in the maximum spreading diameter due to the reduction in the effects of viscosity, density, and surface tension. In the next step, the effects of droplet impact on the hydrophilic and superhydrophobic surfaces with the porosities of 20–80% were evaluated. The obtained results revealed that the increase in the surface porosity caused a decrease in the droplet diameter during the impact time. Also, at high surface porosity values, the decline in the contact angle influence on the droplet dynamic behavior was observed.

scholarly journals Cross-linked chitosan-glyoxal/kaolin clay composite: Parametric optimization for color removal and COD reduction of remazol brilliant blue R dye

2021 ◽  
Author(s):  
Ali H. Jawad ◽  
Ahmed Saud Abdulhameed ◽  
Elmira Kashi ◽  
Zaher Mundher Yaseen ◽  
Zeid A. ALOthman ◽  
...  
Keyword(s):  
Freundlich Isotherm ◽  
Color Removal ◽  
Brilliant Blue ◽  
Inorganic Filler ◽  
Isotherm Models ◽  
Kaolin Clay ◽  
Cod Reduction ◽  
Remazol Brilliant Blue R ◽  
Main Input ◽  
The Impact

Abstract Kaolin clay (KN) was employed as an inorganic filler to modify a cross-linked chitosan-glyoxal as Schiff’s-based chitosan composite derivative (CTS-GLY). The resulting (CTS-GLY/KN) was found to be a promising composite synthetic biopolymer that can be potentially utilized for color removal as well as COD reduction of an industrial anionic dye (remazol brilliant blue R, RBBR). The surface porosity, crystallinity, morphology, functionality, charge, and amine content of the CTS-GLY/KN were studied using BET, XRD, SEM, FTIR, pHpzc and pH-potentiometric titration analyses, respectively. Response surface methodology-Box-Behnken design (RSM-BBD) was used to optimize the impact of the main input factors on the color removal and COD reduction of RBBR. The adsorptive performance CTS-GLY/KN towards RBBR was well-defined by both Langmuir and Freundlich isotherm models with highest adsorption capacity of 447.1 mg/g at 30 ˚C. This finding reveals that CTS-GLY/KN can be utilized as a promising, feasible, and environmentally friendly composite-biosorbent for color removal and COD reduction of textile dyes from aqueous medium.

Influence of nanoparticles on the polymer-conditioned dewatering of wastewater sludges

2013 ◽  
Vol 67 (9) ◽  
pp. 2117-2123
Author(s):  
N. J. Boyle ◽  
G. M. Evans
Keyword(s):  
Activated Sludge ◽  
Titanium Dioxide Nanoparticles ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Wastewater Sludge ◽  
Small Scale ◽  
Sludge Dewatering ◽  
Solids Content ◽  
The Impact

The effect of using small-scale, high surface area, nanoparticles to supplement polymer-conditioned wastewater sludge dewatering was investigated. Aerobically digested sludge and waste activated sludge sourced from the Hunter Valley, NSW, Australia, were tested with titanium dioxide nanoparticles. The sludge samples were dosed with the nanoparticles in an attempt to adsorb a component of the charged biopolymer surfactants present naturally in sludge. The sludge was conditioned with a cationic polymer. The dewatering characteristics were assessed by measuring the specific resistance to filtration through a modified time-to-filter testing apparatus. The solids content of the dosed samples was determined by a mass balance and compared to the original solids content in the activated sludge. Test results indicated that nanoparticle addition modified the structure of the sludge and provided benefits in terms of the dewatering rate. The samples dosed with nanoparticles exhibited faster water removal, indicating a more permeable filter cake and hence more permeable sludge. A concentration of 2–4% nanoparticles was required to achieve a noticeable benefit. As a comparison, the sludge samples were also tested with a larger particle size, powdered activated carbon (PAC). It was found that the PAC did provide some minor benefits to sludge dewatering but was outperformed by the nanoparticles. The solids content of the final sludge was increased by a maximum of up to 0.6%. The impact of the order sequence of particles and polymer was also investigated. It was found that nanoparticles added before polymer addition provided the best dewatering performance. This outcome was consistent with current theories and previous research through the literature. An economic analysis was undertaken to confirm the viability of the technology for implementation at a full-scale plant. It was found that, currently, this technology is unlikely to be favourable unless the nanoparticles can be sourced for a low cost.

scholarly journals Convective environment in pre-monsoon and monsoon conditions over the Indian subcontinent: the impact of surface forcing

2018 ◽  
Vol 18 (10) ◽  
pp. 7473-7488 ◽  
Author(s):  
Lois Thomas ◽  
Neelam Malap ◽  
Wojciech W. Grabowski ◽  
Kundan Dani ◽  
Thara V. Prabha
Keyword(s):  
Indian Subcontinent ◽  
High Surface ◽  
Convective Available Potential Energy ◽  
Bowen Ratio ◽  
Heat Fluxes ◽  
Tropospheric Temperature ◽  
Theoretical Argument ◽  
Near Surface ◽  
Surface Moisture ◽  
The Impact

Abstract. Thermodynamic soundings for pre-monsoon and monsoon seasons from the Indian subcontinent are analysed to document differences between convective environments. The pre-monsoon environment features more variability for both near-surface moisture and free-tropospheric temperature and moisture profiles. As a result, the level of neutral buoyancy (LNB) and pseudo-adiabatic convective available potential energy (CAPE) vary more for the pre-monsoon environment. Pre-monsoon soundings also feature higher lifting condensation levels (LCLs). LCL heights are shown to depend on the availability of surface moisture, with low LCLs corresponding to high surface humidity, arguably because of the availability of soil moisture. A simple theoretical argument is developed and showed to mimic the observed relationship between LCLs and surface moisture. We argue that the key element is the partitioning of surface energy flux into its sensible and latent components, that is, the surface Bowen ratio, and the way the Bowen ratio affects surface buoyancy flux. We support our argument with observations of changes in the Bowen ratio and LCL height around the monsoon onset, and with idealized simulations of cloud fields driven by surface heat fluxes with different Bowen ratios.

Sign in / Sign up

Export Citation Format

Share Document