scholarly journals Sustainable Consumption Using the Example of Food Processing in a Restaurant

2021 ◽  
Vol 13 (24) ◽  
pp. 13868
Author(s):  
Sergej Gričar ◽  
Violeta Šugar
Keyword(s):  
Food Processing ◽  
Hospitality Industry ◽  
Storage Temperature ◽  
Sustainable Consumption ◽  
Value Added ◽  
Nutritional Values ◽  
Reduce Energy Consumption ◽  
The Cost ◽  
First Time ◽  
Descriptive Statistical Analysis

While strategy is of great importance in the hospitality industry, this article is in regard to the process. Therefore, for the first time, this article examines how stuffed yellow peppers are frozen (congelé) and later served as a portion of hot food in restaurants. A sensory analysis was performed, and tasters were invited. Data were collected over three different periods that represented the duration of freezing. The results of the descriptive statistical analysis indicated that the evaluated frozen dishes exhibited degrees of sensory deterioration. The findings are critical to the restaurant business because recipes are often skipped, and the process depends solely on the chefs. The primary value added for management is that strict recipes could improve the cost and shelf life of meals prepared and then frozen in the restaurant by lowering the storage temperature or shortening the freezing time. Incidentally, such analysis should be a continuous development to reduce energy consumption and increase food quality. The consistent results first demonstrated a decreased mouthfeel of the sauce after the first month and, second, a higher stickiness after two months of freezing. In addition, the nutritional values of the dish were calculated using trademarked software.

Investigating the Relationship between Company Competitiveness and Environmental Regulation in European Food Processing: Results of a Matched Firm Comparison

1998 ◽  
Vol 30 (9) ◽  
pp. 1585-1602 ◽  
Author(s):  
D M W N Hitchens ◽  
J E Birnie ◽  
A McGowan ◽  
U Triebswetter ◽  
A Cottica
Keyword(s):  
Environmental Regulation ◽  
Food Processing ◽  
Value Added ◽  
Effluent Treatment ◽  
Environmental Costs ◽  
The European Union ◽  
The Republic ◽  
The Cost ◽  
The Relationship ◽  
Regulation Costs

The authors use a method of matched-plant comparisons between food processing firms in Germany, Italy, Northern Ireland, and the Republic of Ireland to investigate the relationship between environmental regulation and company competitiveness across the European Union. Comparative competitiveness was indicated by measures of value-added per employee, physical productivity, export share, and employment growth. The cost of water supply (public or well), effluent treatment (in-plant treatment and/or sewerage system), and disposal of sludge and packaging were also compared. Total environmental costs in Germany, Italy, and Ireland were small: usually less than 1% of turnover. Compared with the Irish firms, German companies had relatively high environmental costs as well as productivity levels. There was, however, a lack of a clear relationship between company competitiveness and the size of regulation costs: in Ireland and Italy environmental costs were similar but German firms had much higher productivity; compared with German counterparts, Italian firms had lower environmental costs but higher productivity.

scholarly journals OPTIMASI PROSES PERAKITAN CAR STEREO DENGAN MENGGUNAKAN SISTEM MANUFAKTUR SELULAR

POROS ◽  
2018 ◽  
Vol 15 (2) ◽  
pp. 115
Author(s):  
Dodi Mulyadi ◽  
Budhi M. Suyitno ◽  
Susanto Sudiro
Keyword(s):  
Market Competition ◽  
Production Capacity ◽  
Value Added ◽  
Global Market ◽  
Manufacturing Companies ◽  
Worker Productivity ◽  
Mobile Cellular ◽  
Manufactured Products ◽  
The Cost ◽  
First Time

Abstract: Today's global market competition has spurred the producers of manufactured products to perform a variety of efficiency and continuous improvement for increasing the productivity of workers and reducing the cost of manufacture. Its aim is for helping companies to survive in the global competition. Thus, the companies can sell their products with more competitive price. Changing the conventional working system with better one - using a cellular manufacturing system - is one of the efficiency that can be done by the manufacturing companies. However the firm which had changed its conventional manual assembling system into mobile (cellular) assembling system resulted the improvement of workers knowledge from 3 up to 6 grade previously, it reduced 2 workers with the same number of work stations, increased the efficiency of assembling lines as much as 7.18%, increased worker productivity as much as 14.28% with the same production capacity, reduced Not Right First Time / NRFT as much as 37.50%, increased the Value Added Per Person / VAPP as much as 12.70%, and raised the Floor Space Utilization / FSU as much as 3.17%. 

scholarly journals Interruptive Time Series Analysis of GST Upon Non-Performing Non-Housing Property Loans: Case Study from Malaysia

2021 ◽  
Vol 16 (1) ◽  
pp. 35-58
Author(s):  
Kuen-Wei Tham ◽  
◽  
Rosli Said ◽  
Yasmin Mohd Adnan ◽  
◽  
...  
Keyword(s):  
Time Series ◽  
Value Added ◽  
Negative Effects ◽  
Post Intervention ◽  
Time Series Regression ◽  
Commercial Property ◽  
Goods And Services ◽  
Quasi Experimental ◽  
The Cost ◽  
First Time

Value Added Taxes increases the cost of living and affect the ability of loan repayments indirectly. The introduction of the Goods and Services Tax (GST) in Malaysia in 2014 had garnered significant attention on its potential negative effects on the property industry. Coincidentally, there is a rise of non-performing non-housing property loans (NPNHLs) consisting of industrial and commercial property loans as GST was introduced and was in effect. The NPNHLs which consists of mainly industrial and commercial property loans faced a steep increase for the first time in 2014, after a long and consistent decline since 2007. From the inception stage of the GST to its effective implementation date, the Malaysian NPNHLs responded with a unique pattern that offers an opportunity for research. Hence, this study aimed to investigate and measure the intervention spill-over effects of GST upon the Malaysian NPNHLs. Utilizing a quasi-experimental design of interruptive time series regression analysis, it was found that there is a close and significant relationship between the implementation of GST and the rise of NPNHLs in Malaysia. The pre and post intervention of the GST regime was found to be in sync with the rise of non-performing non-housing property loans in Malaysia. Keywords: value added tax, goods and services tax, interruptive time series regression, Malaysia

An Evaluation of Provincial Macroeconomic Performance in Vietnam

2017 ◽  
pp. 34-47
Author(s):  
Hoi Le Quoc ◽  
Nam Pham Xuan ◽  
Tuan Nguyen Anh
Keyword(s):  
Development Strategy ◽  
Institutional Transformation ◽  
Economic Indicators ◽  
Macroeconomic Performance ◽  
Economic Development Strategy ◽  
Socio Economic Development ◽  
The Cost ◽  
Development Objectives ◽  
First Time

The study was targeted at developing a methodology for constructing a macroeconomic performance index at a provincial level for the first time in Vietnam based on 4 groups of measurements: (i) Economic indicators; (ii) oriented economic indicators; (iii) socio-economic indicators; and (iv) economic - social – institutional indicators. Applying the methodology to the 2011 - 2015 empirical data of all provinces in Vietnam, the research shows that the socio-economic development strategy implemented by those provinces did not provide balanced outcomes between growth and social objectives, sustainability and inclusiveness. Many provinces focused on economic growth at the cost of structural change, equality and institutional transformation. In contrast, many provinces were successful in improving equality but not growth. Those facts threaten the long-term development objectives of the provinces.

Implementasi Analisis Proses Bisnis Sebagai Upaya Pengurangan Biaya

2019 ◽  
Vol 10 (1) ◽  
pp. 1-27
Author(s):  
Aniek Wijayanti
Keyword(s):  
Business Process ◽  
Cost Reduction ◽  
Process Analysis ◽  
Value Added ◽  
Added Value ◽  
Natural Material ◽  
Management Activity ◽  
Procurement Process ◽  
Material Procurement ◽  
The Cost

Business Process Analysis can be used to eliminate or reduce a waste cost caused by non value added activities that exist in a process. This research aims at evaluating activities carried out in the natural material procurement process in the PT XYZ, calculating the effectiveness of the process cycle, finding a way to improve the process management, and calculating the cost reduction that can achieved by activity management. A case study was the approach of this research. The researcher obtained research data throughout deep interviews with the staff who directly involved in the process, observation, and documentation of natural material procurement. The result of this study show that the effectiveness of the process cycle of natural material procurement in the factory reached as much as 87,1% for the sand material and 72% for the crushed stone. This indicates that the process still carry activities with no added value and still contain ineffective costs. Through the Business Process Mechanism, these non value added activities can be managed so that the process cycle becomes more efficient and cost effectiveness is achieved. The result of the effective cycle calculation after the management activities implementation is 100%. This means that the cost of natural material procurement process has become effective. The result of calculation of the estimated cost reduction as a result of management activity is as much as Rp249.026.635,90 per year.

Energy After COVID

2020 ◽  
Vol 119 (820) ◽  
pp. 317-322
Author(s):  
Michael T. Klare
Keyword(s):  
Renewable Energy ◽  
Electric Vehicles ◽  
Fossil Fuels ◽  
Fossil Fuel ◽  
White Collar ◽  
Peak Oil ◽  
Business Travel ◽  
Reduce Energy Consumption ◽  
The Cost ◽  
Energy Companies

By transforming patterns of travel and work around the world, the COVID-19 pandemic is accelerating the transition to renewable energy and the decline of fossil fuels. Lockdowns brought car commuting and plane travel to a near halt, and the mass experiment in which white-collar employees have been working from home may permanently reduce energy consumption for business travel. Renewable energy and electric vehicles were already gaining market share before the pandemic. Under pressure from investors, major energy companies have started writing off fossil fuel reserves as stranded assets that are no longer worth the cost of extracting. These shifts may indicate that “peak oil demand” has arrived earlier than expected.

scholarly journals Autism Tsunami: the Impact of Rising Prevalence on the Societal Cost of Autism in the United States

2021 ◽  
Author(s):  
Mark Blaxill ◽  
Toby Rogers ◽  
Cynthia Nevison
Keyword(s):  
Forecast Model ◽  
The United States ◽  
Population Projections ◽  
Base Case ◽  
Prevention Strategies ◽  
Total Base ◽  
Cost Categories ◽  
The Cost ◽  
The Impact ◽  
First Time

AbstractThe cost of ASD in the U.S. is estimated using a forecast model that for the first time accounts for the true historical increase in ASD. Model inputs include ASD prevalence, census population projections, six cost categories, ten age brackets, inflation projections, and three future prevalence scenarios. Future ASD costs increase dramatically: total base-case costs of $223 (175–271) billion/year are estimated in 2020; $589 billion/year in 2030, $1.36 trillion/year in 2040, and $5.54 (4.29–6.78) trillion/year by 2060, with substantial potential savings through ASD prevention. Rising prevalence, the shift from child to adult-dominated costs, the transfer of costs from parents onto government, and the soaring total costs raise pressing policy questions and demand an urgent focus on prevention strategies.

scholarly journals A METHODOLOGY TO SUPPORT COMPANIES IN THE FIRST STEPS TOWARDS DE-MANUFACTURING

2021 ◽  
Vol 1 ◽  
pp. 131-140
Author(s):  
Federica Cappelletti ◽  
Marta Rossi ◽  
Michele Germani ◽  
Mohammad Shadman Hanif
Keyword(s):  
Environmental Impact ◽  
End Of Life ◽  
Design Stage ◽  
Life Strategies ◽  
Disassembly Sequence ◽  
The Status ◽  
The Cost ◽  
Technical Solutions ◽  
First Time ◽  
Complex Activities

AbstractDe-manufacturing and re-manufacturing are fundamental technical solutions to efficiently recover value from post-use products. Disassembly in one of the most complex activities in de-manufacturing because i) the more manual it is the higher is its cost, ii) disassembly times are variable due to uncertainty of conditions of products reaching their EoL, and iii) because it is necessary to know which components to disassemble to balance the cost of disassembly. The paper proposes a methodology that finds ways of applications: it can be applied at the design stage to detect space for product design improvements, and it also represents a baseline from organizations approaching de-manufacturing for the first time. The methodology consists of four main steps, in which firstly targets components are identified, according to their environmental impact; secondly their disassembly sequence is qualitatively evaluated, and successively it is quantitatively determined via disassembly times, predicting also the status of the component at their End of Life. The aim of the methodology is reached at the fourth phase when alternative, eco-friendlier End of Life strategies are proposed, verified, and chosen.

A standardized terminology of spines in the order Siluriformes (Actinopterygii: Ostariophysi)

2021 ◽  
Author(s):  
Gustavo A Ballen ◽  
Mario C C De Pinna
Keyword(s):  
Comparative Anatomy ◽  
Appendicular Skeleton ◽  
Extensive Literature ◽  
Direct Examination ◽  
Dorsal Fin ◽  
Anatomical Nomenclature ◽  
Standardized Terminology ◽  
The Cost ◽  
First Time ◽  
Terminology System

Abstract A standardized terminology for the anatomy of pectoral- and dorsal-fin spines in the order Siluriformes is proposed based on an extensive literature review and direct examination of representatives of the order. The adult anatomy of the spines is described in detail. Terminology of various spine parts are reviewed and standardized, each term provided with a synonymic list organizing previous usage. Most of the structures treated have been recorded and named in the literature, but some are herein named for the first time. A quantitative approach is proposed for orienting decisions on name usage, aiming at minimizing differences between the terminology proposed and the vast amount of pre-existing literature, herein called the cost function. It is expected that this system will aid efforts in organizing the chaotic anatomical nomenclature of the appendicular skeleton in Siluriformes, and provide a solid basis for advances in comparative anatomy and nomenclature. The proposed terminology system has potential application on a number of fields that utilize information from catfish spines, ranging from taxonomy to phylogenetic systematics to paleontology and archaeology.

scholarly journals Synthesis of ZSM-5 zeolites from biomass power plant ash for removal of ionic dyes from aqueous solution: equilibrium isotherm, kinetic and thermodynamic analysis

RSC Advances ◽  
2021 ◽  
Vol 11 (36) ◽  
pp. 22365-22375
Author(s):  
Guangbing Liang ◽  
Yanhong Li ◽  
Chun Yang ◽  
Xun Hu ◽  
Qingyin Li ◽  
...  
Keyword(s):  
Power Plant ◽  
Performance Testing ◽  
Value Added ◽  
Adsorption Performance ◽  
Original Intention ◽  
Power Plant Ash ◽  
Kinetic And Thermodynamic Analysis ◽  
Biomass Power Plant ◽  
First Time ◽  
Plant Ash

In this work, industrial biomass power plant ash was used to synthesize the ZSM-5 zeolites for the first time with the original intention to turn value-added material into wealth, and then committed to adsorption performance testing.

Sign in / Sign up

Export Citation Format

Share Document