scholarly journals Fabric-Based Triboelectric Nanogenerators

Research ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Jinmei Liu ◽  
Long Gu ◽  
Nuanyang Cui ◽  
Qi Xu ◽  
Yong Qin ◽  
...  
Keyword(s):  
High Performance ◽  
Material Synthesis ◽  
Power Sources ◽  
Practical Applications ◽  
Energy Harvesters ◽  
Portable Electronics ◽  
The Past ◽  
Triboelectric Nanogenerators ◽  
Energy Harvesting Devices ◽  
Further Development

In the past decades, the progress of wearable and portable electronics is quite rapid, but the power supply has been a great challenge for their practical applications. Wearable power sources, especially wearable energy-harvesting devices, provide some possible solutions for this challenge. Among various wearable energy harvesters, the high-performance fabric-based triboelectric nanogenerators (TENGs) are particularly significant. In this review paper, we first introduce the fundamentals of TENGs and their four basic working modes. Then, we will discuss the material synthesis, device design, and fabrication of fabric-based TENGs. Finally, we try to give some problems that need to be solved for the further development of TENGs.

Market Opportunity Analysis in Thailand: Case of Individual Power Sources by Thermoelectric-Generator Technology for Portable Electronics

2019 ◽  
Vol 16 (03) ◽  
pp. 1950027
Author(s):  
Surapree Maolikul ◽  
Thira Chavarnakul ◽  
Somchai Kiatgamolchai
Keyword(s):  
Thermoelectric Generator ◽  
Electrical Power ◽  
Technology Commercialization ◽  
Market Opportunity ◽  
Business Research ◽  
Power Sources ◽  
Practical Applications ◽  
Portable Electronics ◽  
Decision Factors ◽  
Insight Into

Thermoelectrics, an energy-conversion technology, has been developed for its potential to support portable electronics with an innovative power source. Primarily focusing on the metropolitan market in Thailand, the study, thus, aimed at the market insight into portable electronics users’ characteristics and opinions of thermoelectric-generator (TEG) technology commercialization. The business research was conducted to analyze their behaviors for power-supply lacking problems, encountering heat or cold sources, purchasing decision for a TEG-based charger and key decision factors. For practical applications, an innovative TEG-based charger should be more flexible by harnessing various heat or cold sources from ambient situations to generate electrical power.

Further Development and Preliminary Testing of the α-Prototype of an Ultra-Micro Gas Turbine for Portable Power Generation

2008 ◽  
Author(s):  
R. Capata ◽  
E. Sciubba
Keyword(s):  
Fluid Dynamic ◽  
Fem Analysis ◽  
Point Of View ◽  
Power Sources ◽  
Preliminary Testing ◽  
Micro Gas Turbine ◽  
Portable Power ◽  
Portable Electronics ◽  
Further Development ◽  
Physical Construction

The ever increasing development of portable electronics leads to a higher demand for compact and reliable power sources. Significant resources are being presently dedicated to the study of micro machined turbines, because of their remarkable power density that suggests that the generation of about 100–300 W with a total device weight of few hundreds grams and a fuel mass flow rate of few grams per second may be feasible in the short range. In this paper a possible configuration of such a nano-GT set is considered, which was defined on the basis of previous thermo-fluid dynamic analysis: the results of a preliminary design study, including some cold-run tests, are reported in this paper. The layout of the device was finalized on the basis of both a CFD and a FEM analysis that identified the “optimal” blade shape, shaft size and rotors arrangements under the point of view of the energy efficiency and of thermo-mechanical material stresses, Some of the problems deriving by the physical construction and preliminary testing of the prototype are analyzed and discussed.

scholarly journals Towards Portable Nanophotonic Sensors

Sensors ◽  
2019 ◽  
Vol 19 (7) ◽  
pp. 1715 ◽  
Author(s):  
Abdul Shakoor ◽  
James Grant ◽  
Marco Grande ◽  
David. R. S. Cumming
Keyword(s):  
High Performance ◽  
Daily Life ◽  
Point Of Care ◽  
Review Article ◽  
Readout System ◽  
Practical Applications ◽  
Monolithically Integrated ◽  
The Past ◽  
Point Of Care Diagnostics ◽  
Strong Candidate

A range of nanophotonic sensors composed of different materials and device configurations have been developed over the past two decades. These sensors have achieved high performance in terms of sensitivity and detection limit. The size of onchip nanophotonic sensors is also small and they are regarded as a strong candidate to provide the next generation sensors for a range of applications including chemical and biosensing for point-of-care diagnostics. However, the apparatus used to perform measurements of nanophotonic sensor chips is bulky, expensive and requires experts to operate them. Thus, although integrated nanophotonic sensors have shown high performance and are compact themselves their practical applications are limited by the lack of a compact readout system required for their measurements. To achieve the aim of using nanophotonic sensors in daily life it is important to develop nanophotonic sensors which are not only themselves small, but their readout system is also portable, compact and easy to operate. Recognizing the need to develop compact readout systems for onchip nanophotonic sensors, different groups around the globe have started to put efforts in this direction. This review article discusses different works carried out to develop integrated nanophotonic sensors with compact readout systems, which are divided into two categories; onchip nanophotonic sensors with monolithically integrated readout and onchip nanophotonic sensors with separate but compact readout systems.

scholarly journals Paper-based triboelectric nanogenerators and their applications: a review

2021 ◽  
Vol 12 ◽  
pp. 151-171
Author(s):  
Jing Han ◽  
Nuo Xu ◽  
Yuchen Liang ◽  
Mei Ding ◽  
Junyi Zhai ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Three Dimensional ◽  
Human Machine Interaction ◽  
Practical Applications ◽  
Energy Devices ◽  
Paper Electronics ◽  
Facile Fabrication ◽  
Self Powered ◽  
Triboelectric Nanogenerators ◽  
Energy Harvesting Devices

The development of industry and of the Internet of Things (IoTs) have brought energy issues and huge challenges to the environment. The emergence of triboelectric nanogenerators (TENGs) has attracted wide attention due to their advantages, such as self-powering, lightweight, and facile fabrication. Similarly to paper and other fiber-based materials, which are biocompatible, biodegradable, environmentally friendly, and are everywhere in daily life, paper-based TENGs (P-TENGs) have shown great potential for various energy harvesting and interactive applications. Here, a detailed summary of P-TENGs with two-dimensional patterns and three-dimensional structures is reported. P-TENGs have the potential to be used in many practical applications, including self-powered sensing devices, human–machine interaction, electrochemistry, and highly efficient energy harvesting devices. This leads to a simple yet effective way for the next generation of energy devices and paper electronics.

scholarly journals Vibration energy harvesting: A review

2019 ◽  
Vol 09 (04) ◽  
pp. 1930001 ◽  
Author(s):  
Anwesa Mohanty ◽  
Suraj Parida ◽  
Rabindra Kumar Behera ◽  
Tarapada Roy
Keyword(s):  
Energy Harvesting ◽  
Small Scale ◽  
Recent Past ◽  
Vibration Energy Harvesting ◽  
Power Sources ◽  
Energy Harvesters ◽  
Portable Power ◽  
Different Types ◽  
Energy Harvesting System ◽  
Energy Harvesting Devices

This study is based on energy harvesting from vibration and deals with the comparison of different techniques. In the present scenario, energy harvesting has drawn the attention of researchers due to a rapid increase in the use of wireless and small-scale devices. So, there is a huge thirst among scientists to develop permanent portable power sources. In the surroundings, a lot of unutilized energy is wasted which can be collected and used for power generation. Research works have been extensively carried out to develop energy harvesting devices catering to the increasing needs of being efficient and economical. Effective energy harvesting mainly depends on the design of the transducer. Different types of design techniques, material properties, and availability of energy harvesters are reviewed in this paper. The paper aims to explore the advantages and limitations of different energy harvesting principles, advances, and findings of the recent past. This study also discusses some of the key ideas for the enhancement of power output. This paper provides a broad view of the energy harvesting system to the learners, which will facilitate them to design more efficient energy harvesting devices by using different principles.

scholarly journals Yo-Yo Inspired Triboelectric Nanogenerator

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1798
Author(s):  
Deokjae Heo ◽  
Jihoon Chung ◽  
Gunsub Shin ◽  
Minhyeong Seok ◽  
Chanhee Lee ◽  
...  
Keyword(s):  
Dielectric Material ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Triboelectric Nanogenerator ◽  
Power Sources ◽  
Vast Number ◽  
Hand Motion ◽  
Energy Harvesters ◽  
Triboelectric Nanogenerators ◽  
And Function

Recently, as the demand for sustainable and renewable energy to power a large number of small electronics and sensors has increased, various mechanical energy harvesters such as electromagnetic, piezoelectric, and triboelectric generators have been highlighted because they have no environmental constraints to generate electricity and function as sustainable power sources. Among these generators, triboelectric nanogenerators (TENGs), which produce electrical energy via triboelectrification and electrostatic induction, are a promising energy harvesting technology that can utilize existing materials or the structure of existing commercial products. Considering the vast number of independent portable electronics used today, the development of hand-driven TENGs is important. There is great demand for TENG considering both commercial product-inspired designs, which are the merit of TENG itself, and the hand-driven type. However, relevant studies are still lacking, and therefore further studies in these areas are required. In this study, we developed a novel triboelectric nanogenerator (Y-TENG) inspired by the Yo-Yo that can produce a sustainable electric output by hand motion input. One generator of Y-TENG produced a maximum VOC of 10 V and an ICC of 0.7 μA. Peak/root mean square (RMS) voltage output-based quantitative analysis for the optimized number of blades and dielectric material was performed. The proposed Y-TENG was able to continuously light up three light-emitting diodes (LEDs) while the Y-TENG moved up and down.

scholarly journals Natural and Eco-Friendly Materials for Triboelectric Energy Harvesting

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Vladislav Slabov ◽  
Svitlana Kopyl ◽  
Marco P. Soares dos Santos ◽  
Andrei L. Kholkin
Keyword(s):  
Energy Harvesting ◽  
Polyvinylidene Fluoride ◽  
Electric Energy ◽  
Clean Energy ◽  
Natural Materials ◽  
Energy Harvesters ◽  
Wide Range ◽  
Triboelectric Nanogenerators ◽  
Energy Harvesting Devices ◽  
Triboelectric Energy Harvesting

AbstractTriboelectric nanogenerators (TENGs) are promising electric energy harvesting devices as they can produce renewable clean energy using mechanical excitations from the environment. Several designs of triboelectric energy harvesters relying on biocompatible and eco-friendly natural materials have been introduced in recent years. Their ability to provide customizable self-powering for a wide range of applications, including biomedical devices, pressure and chemical sensors, and battery charging appliances, has been demonstrated. This review summarizes major advances already achieved in the field of triboelectric energy harvesting using biocompatible and eco-friendly natural materials. A rigorous, comparative, and critical analysis of preparation and testing methods is also presented. Electric power up to 14 mW was already achieved for the dry leaf/polyvinylidene fluoride-based TENG devices. These findings highlight the potential of eco-friendly self-powering systems and demonstrate the unique properties of the plants to generate electric energy for multiple applications.

scholarly journals Graphene-Based Inks for Printing of Planar Micro-Supercapacitors: A Review

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 978 ◽  
Author(s):  
Tuan Sang Tran ◽  
Naba Dutta ◽  
Namita Roy Choudhury
Keyword(s):  
Energy Density ◽  
Full Advantage ◽  
Low Energy ◽  
Dramatic Improvement ◽  
Power Sources ◽  
Practical Applications ◽  
Interdigital Electrodes ◽  
The World ◽  
Further Development

Micro-supercapacitors have recently emerged as promising microscale power sources for portable and wearable microelectronics. However, most reported planar micro-supercapacitors suffer from low energy density and the complexity of fabrication, which calls for their further development. In recent years, the fortification of graphene has enabled the dramatic improvement of planar micro-supercapacitors by taking full advantage of in-plane interdigital architecture and the unique features of graphene. The development of viable printing technologies has also provided better means for manufacturing, bringing micro-supercapacitors closer to practical applications. This review summarizes the latest advances in graphene-based planar micro-supercapacitors, with specific emphasis placed on formulation of graphene-based inks and their fabrication routes onto interdigital electrodes. Prospects and challenges in this field are also discussed towards the realization of graphene-based planar micro-supercapacitors in the world of microelectronics.

scholarly journals Recent Developments and Prospects of M13- Bacteriophage Based Piezoelectric Energy Harvesting Devices

Nanomaterials ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 93 ◽  
Author(s):  
In Woo Park ◽  
Kyung Won Kim ◽  
Yunhwa Hong ◽  
Hyun Ji Yoon ◽  
Yonghun Lee ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
High Performance ◽  
Hierarchical Structures ◽  
Practical Applications ◽  
Energy Devices ◽  
Piezoelectric Energy ◽  
Wide Range ◽  
Recent Developments ◽  
Energy Harvesting Devices ◽  
Powerful Strategy

Recently, biocompatible energy harvesting devices have received a great deal of attention for biomedical applications. Among various biomaterials, viruses are expected to be very promising biomaterials for the fabrication of functional devices due to their unique characteristics. While other natural biomaterials have limitations in mass-production, low piezoelectric properties, and surface modification, M13 bacteriophages (phages), which is one type of virus, are likely to overcome these issues with their mass-amplification, self-assembled structure, and genetic modification. Based on these advantages, many researchers have started to develop virus-based energy harvesting devices exhibiting superior properties to previous biomaterial-based devices. To enhance the power of these devices, researchers have tried to modify the surface properties of M13 phages, form biomimetic hierarchical structures, control the dipole alignments, and more. These methods for fabricating virus-based energy harvesting devices can form a powerful strategy to develop high-performance biocompatible energy devices for a wide range of practical applications in the future. In this review, we discuss all these issues in detail.

scholarly journals Leverage Surface Chemistry for High-Performance Triboelectric Nanogenerators

2020 ◽  
Vol 8 ◽  
Author(s):  
Jing Xu ◽  
Yongjiu Zou ◽  
Ardo Nashalian ◽  
Jun Chen
Keyword(s):  
Surface Chemistry ◽  
High Performance ◽  
Low Cost ◽  
Flexible Structures ◽  
Chemical Properties ◽  
Electrical Energy ◽  
Active Sensors ◽  
Power Sources ◽  
Self Powered ◽  
Triboelectric Nanogenerators

Triboelectric Nanogenerators (TENGs) are a highly efficient approach for mechanical-to-electrical energy conversion based on the coupling effects of contact electrification and electrostatic induction. TENGs have been intensively applied as both sustainable power sources and self-powered active sensors with a collection of compelling features, including lightweight, low cost, flexible structures, extensive material selections, and high performances at low operating frequencies. The output performance of TENGs is largely determined by the surface triboelectric charges density. Thus, manipulating the surface chemical properties via appropriate modification methods is one of the most fundamental strategies to improve the output performances of TENGs. This article systematically reviews the recently reported chemical modification methods for building up high-performance TENGs from four aspects: functional groups modification, ion implantation and decoration, dielectric property engineering, and functional sublayers insertion. This review will highlight the contribution of surface chemistry to the field of triboelectric nanogenerators by assessing the problems that are in desperate need of solving and discussing the field's future directions.

Sign in / Sign up

Export Citation Format

Share Document