scholarly journals Evaluation of Microalgae Culture in PA and Commercial Urea Media

2021 ◽  
Vol 4 (3) ◽  
pp. 90-94
Author(s):  
Pablo Augusto Gulhões ◽  
Alexia Ananda Santana Simões ◽  
Jársia de Melo dos Santos ◽  
Edna dos Santos Almeida
Keyword(s):  
Culture Media ◽  
Pilot Scale ◽  
Production Costs ◽  
Standard Medium ◽  
Chlorella Sp ◽  
Microalgae Culture ◽  
The Cost ◽  
Similar Growth

This work aimed to evaluate the growth and cost cultivation of Chlorella sp microalgae in PA and commercial urea medium solutions compared to BBM standard medium. We cultivated the microalgae Chlorella sp in BBM, PA urea, and commercial urea media, evaluating their growth for 8 days. In addition, we appraised the cost of the culture media considering the quotation of the reagents and the mass used for pilot-scale cultivation (100l). It was possible to observe the similar growth of microalgae with urea PA and BBM. The use of urea PA as a culture media for microalgae has the potential to reduce the cost of the medium by 68%. Thus, the cultivation of Chlorella in urea medium represents an alternative to reduce the production costs of biomass from this microorganism.

scholarly journals Low-cost culture medium for biomass production of lactic acid bacteria with probiotic potential destined to broilers

2020 ◽  
Vol 20 (1) ◽  
pp. 1-9
Author(s):  
Ayelen P. BERISVIL ◽  
Diego M. ASTESANA ◽  
Jorge A. ZIMMERMANN ◽  
Laureano S. FRIZZO ◽  
Eugenia ROSSLER ◽  
...  
Keyword(s):  
Biomass Production ◽  
Culture Medium ◽  
Culture Media ◽  
Low Cost ◽  
Probiotic Potential ◽  
Cost Growth ◽  
Commercial Medium ◽  
Mg Addition ◽  
The Cost ◽  
Similar Growth

The aim of this study was to evaluate different low-cost culture media for biomass production of 3 potential probiotic L. salivarius strains, which could be destined to broilers at farms. Different formulated media based on whey permeate (WP) supplemented with nitrogenous sources were evaluated: yeast extract (YE), whey hydrolysate (WH) and MnSO4.H2O (Mn), MgSO4.7H2O (Mg). The growth of each strain in the formulated media and the cost was compared with their growth and cost in commercial medium (MRS). L. salivarius DSPV008P did not grow adequately in any of the formulated media. On the other hand, addition of YE and Mn in the formulated media increased L. salivarius DSPV002P and L. salivarius DPSV011P growth. In contrast, WH and Mg addition increased the L. salivarius DSPV002P biomass only. L. salivarius DSPV011P was the only strain that had similar growth performance in MRS as in the selected medium: WP + YE 8g/l + Mn. In this sense, L. salivarius DSPV011P reached a biomass of 9.22 Log (CFU/ml) in the selected formulated medium, with a low-cost growth medium 12 times less than in MRS. Although the effect of supplements added to the culture medium on kinetic parameters are strain dependent, L. salivarius DSPV011P is the strain with the best technological characteristics, capable of growing in a medium based on a by-product of the dairy industry supplemented with YE and Mn and at a much less cost than in MRS medium.

scholarly journals Mass transfer characteristics and biological effect of flue gas during microalgae culture

2021 ◽  
Author(s):  
Bo Wang ◽  
Wen Wang ◽  
Yu Xu ◽  
zhongliang sun
Keyword(s):  
Flue Gas ◽  
Ph Value ◽  
Culture Media ◽  
High Concentration ◽  
Microalgal Biomass ◽  
Microalgae Culture ◽  
Adjustment Strategy ◽  
Scenedesmus Dimorphus ◽  
Carbon Dioxide Co2 ◽  
The Cost

Not only carbon dioxide (CO2) but also air pollutants, such as sulfur oxides (SOx) and nitrogen oxides (NOx), are present in flue gas, and their reasonable and effective utilization is conducive to reducing the cost of microalgal biomass production. By utilizing simulated flue gas, the absorption characteristics of different components in transfer units were explored. The results showed that the presence of SO2 decreased the absorptivity of CO2, which reduced the concentration of the available carbon source for microalgal cells in the culture medium at the same pH value. Moreover, the presence of high-concentration oxygen (O2) in flue gas could improve the absorptivity of nitric oxide (NO). Scenedesmus dimorphus was cultured by using sulfur- or nitrogen-deficient culture media. The results showed that SOx and NOx in flue gas did not significantly influence the growth and biochemical compositions of microalgal cells when these gases were dissolved in water. Based on the above results and the metabolic kinetics of microalgal cells for nutrient elements, an adjustment strategy for the initial gas source when culturing microalgae with flue gas is proposed: (1) flue gas should be partially desulfurized so that the SOx and CO2 concentrations after desulfurization satisfy a certain relationship with the components; and (2) denitrification should not be performed because flue gas can be oxidized before utilization to increase the rate of utilization of NO.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

scholarly journals Monitoring the technological processes in the wood industry in order to make them more efficient through technical overhauling

2019 ◽  
Vol 290 ◽  
pp. 02007
Author(s):  
Radu Dan Paltan ◽  
Cristina Biriş ◽  
Loredana Anne-Marie Rădulescu
Keyword(s):  
Automotive Industry ◽  
Operating Mode ◽  
Solid Wood ◽  
Production Costs ◽  
Operating Costs ◽  
Future Research ◽  
Wood Industry ◽  
Research Article ◽  
State Of Research ◽  
The Cost

Of many techniques that are used to optimize production and costs, the studies conducted within a profile company lead to our choice for testing the 6Sigma method (the most used method in the automotive industry) in view of the economic efficiency applied in the wood Industry company. This method measures how many flaws exist in a process and determines in a systematic way how to improve it by technical overhauling and eliminating or minimizing the process for efficiency. This research article aims to study the state of research on the optimization of the production process through technical overhauling for panels reconstituted from solid wood and ways to make production more efficient by cutting costs through technical overhauling. From preliminary research, we estimate that all the items founded and others that will result from further research will result in a significant decrease in production costs that are reflected in the cost of the finished product and consequently in increasing the yield of the company by maximizing its profit. At the same time it may be the basis of future research studies in the field. The easier it is to maximize profits, the lower the operating costs are and the higher recovery rate of investments are, that will result a change in the operating mode: “working smarter not harder”.

scholarly journals Bioethanolic yeasts from dung beetles: tapping the potential of extremophilic yeasts for improvement of lignocellulolytic feedstock fermentation

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Anita Ejiro Nwaefuna ◽  
Karl Rumbold ◽  
Teun Boekhout ◽  
Nerve Zhou
Keyword(s):  
Treatment Process ◽  
Dung Beetles ◽  
Production Costs ◽  
Industrial Wastes ◽  
Major Drawback ◽  
Renewable Fuel ◽  
Extreme Stress ◽  
Pre Treatment ◽  
The Cost ◽  
Simultaneous Saccharification

AbstractBioethanol from abundant and inexpensive agricultural and industrial wastes possesses the potential to reduce greenhouse gas emissions. Bioethanol as renewable fuel addresses elevated production costs, as well as food security concerns. Although technical advancements in simultaneous saccharification and fermentation have reduced the cost of production, one major drawback of this technology is that the pre-treatment process creates environmental stressors inhibitory to fermentative yeasts subsequently reducing bioethanol productivity. Robust fermentative yeasts with extreme stress tolerance remain limited. This review presents the potential of dung beetles from pristine and unexplored environments as an attractive source of extremophilic bioethanolic yeasts. Dung beetles survive on a recalcitrant lignocellulose-rich diet suggesting the presence of symbiotic yeasts with a cellulolytic potential. Dung beetles inhabiting extreme stress environments have the potential to harbour yeasts with the ability to withstand inhibitory environmental stresses typically associated with bioethanol production. The review further discusses established methods used to isolate bioethanolic yeasts, from dung beetles.

Evaluation of Microbially Influenced Degradation as a Method for the Decontamination of Radio Actively Contaminated Concrete

1996 ◽  
Vol 465 ◽  
Author(s):  
R. D. Rogers ◽  
M. A. Hamilton ◽  
L. O. Nelson ◽  
J. Benson ◽  
M. Green
Keyword(s):  
Pilot Scale ◽  
Field Application ◽  
Department Of Energy ◽  
Laboratory Evaluation ◽  
Concrete Slabs ◽  
Initial Field ◽  
Acceptable Method ◽  
Application Data ◽  
The Cost ◽  
The U.S

ABSTRACTBecause there are literally square kilometers of radioactively contaminated concrete surfaces within the U.S. Department of Energy (DOE) complex, the task (both scope and cost) of decontamination is staggering. Complex-wide cleanup using conventional methodology does not appear to be feasible for every facility because of prioritization, cost, and manual effort required.We are investigating the feasibility of using microbially influenced degradation (MID) of concrete as a unique, innovative approach for the decontamination of concrete. Currently, work is being conducted to determine the practicality and cost effectiveness of using this environmentally acceptable method for decontamination of large surface concrete structures. Under laboratory conditions, the biodecontamination process has successfully been used to remove 2 mm of the surface of concrete slabs. Subsequently, initial field application data from an ongoing pilot-scale demonstration have shown that an average of 2 mm of surface can be removed from meter-square areas of contaminated concrete. The cost for the process has been estimated as $1.29/m2. Methodologies for field application of the process are being developed and will be tested. This paper provides information on the MID process, laboratory evaluation of its use for decontamination, and results from the pilot field application.

Unequal Treatment of Identical Agents in Cournot Equilibrium

1999 ◽  
Vol 89 (3) ◽  
pp. 585-604 ◽  
Author(s):  
Stephen W Salant ◽  
Greg Shaffer
Keyword(s):  
Marginal Cost ◽  
Consumer Surplus ◽  
Production Costs ◽  
Cournot Equilibrium ◽  
Unequal Treatment ◽  
Marginal Costs ◽  
Second Stage ◽  
Policy Debates ◽  
The Cost ◽  
Antitrust Regulation

Oligopoly models where prior actions by firms affect subsequent marginal costs have been useful in illuminating policy debates in areas such as antitrust regulation, environmental protection, and international competition. We discuss properties of such models when a Cournot equilibrium occurs at the second stage. Aggregate production costs strictly decline with no change in gross revenue or gross consumer surplus if the prior actions strictly increase the variance of marginal costs without changing the marginal-cost sum. Therefore, unless the cost of inducing second-stage asymmetry more than offsets this reduction in production costs, the private and social optima are asymmetric. (JEL D43, L13, L40)

scholarly journals Synthesis of the Microbial Polysaccharide Gellan from Dairy and Plant-Based Processing Coproducts

2021 ◽  
Vol 2 (2) ◽  
pp. 234-244
Author(s):  
Thomas P. West
Keyword(s):  
Corn Steep Liquor ◽  
Nitrogen Sources ◽  
Soluble Starch ◽  
Culture Conditions ◽  
Water Soluble ◽  
Production Costs ◽  
Microbial Polysaccharide ◽  
Steep Liquor ◽  
The Cost ◽  
Condensed Distillers Solubles

This review examines the production of the microbial polysaccharide gellan, synthesized by Sphingomonas elodea, on dairy and plant-based processing coproducts. Gellan is a water-soluble gum that structurally exists as a tetrasaccharide comprised of 20% glucuronic acid, 60% glucose and 20% rhamnose, for which various food, non-food and biomedical applications have been reported. A number of carbon and nitrogen sources have been tested to determine whether they can support bacterial gellan production, with several studies attempting to optimize gellan production by varying the culture conditions. The genetics of the biosynthesis of gellan has been explored in a number of investigations and specific genes have been identified that encode the enzymes responsible for the synthesis of this polysaccharide. Genetic mutants exhibiting overproduction of gellan have also been identified and characterized. Several dairy and plant-based processing coproducts have been screened to learn whether they can support the production of gellan in an attempt to lower the cost of synthesizing the microbial polysaccharide. Of the processing coproducts explored, soluble starch as a carbon source supported the highest gellan production by S. elodea grown at 30 °C. The corn processing coproducts corn steep liquor or condensed distillers solubles appear to be effective nitrogen sources for gellan production. It was concluded that further research on producing gellan using a combination of processing coproducts could be an effective solution in lowering its overall production costs.

Paper fillers innovations: From design of particles to preparing filler composites

BioResources ◽  
2020 ◽  
Vol 15 (2) ◽  
pp. 2117-2118
Author(s):  
Shunxi Song ◽  
Zeshi Wu ◽  
Jingyi Nie
Keyword(s):  
Filler Content ◽  
Production Costs ◽  
Critical Properties ◽  
Single Particles ◽  
Paper Mills ◽  
Market Competitiveness ◽  
Academic Researchers ◽  
The Cost ◽  
Natural Fillers

The increase of filler content in paper is an effective way to reduce production costs and to promote the market competitiveness of paper mills. A shift from natural fillers to synthetic fillers has enabled improvements in the critical properties of paper. Meanwhile, innovations from single particles of filler to filler composites has made it possible to increase the filler content of paper. Among various filler innovations, the design of fiber/filler composites has aroused general attention from industry and academic researchers. However, concerns related to the cost and recyclability of composite fillers remain to be addressed.

Perhitungan Harga Pokok Produksi (Cost) Hasil Produk Inovatif UMKM Desa Kemuning Ngargoyoso Jawa Tengah

2021 ◽  
Vol 2 (2) ◽  
pp. 89-96
Author(s):  
Lailah Fujianti ◽  
Shinta Budi Astuti ◽  
Rizki Ramadhan Putra Yasa
Keyword(s):  
Local Government ◽  
Raw Materials ◽  
Production Costs ◽  
The South ◽  
The West ◽  
The North ◽  
Central Java ◽  
Innovative Products ◽  
The Cost ◽  
Central Java Province

Abstrak   Kemuning adalah desa di kecamatan Ngargoyoso, Kabupaten Karanganyar, Provinsi Jawa Tengah. Secara geografis batas Desa Kemuning  sebelah barat berbatasan dengan Desa Ngargoyoso, sebelah timur berbatasan dengan Desa Segoro Gunung, sebelah Utara  berbatasan Kecamatan Jenawi dan sebelah selatan berbatasan Desa Girimulyo. Desa ini memiliki Misi yang ingin diwujudkan  yaitu Desa Wisata. Pemerintah setempat  memberikan pelatihan untuk membuat produk inovatif guna melengkapi kebutuhan sebagai desa wisata kepada pelaku UMKM dan Penrajin. Produk Inovatif tersebut akan dijual kepada pengunjung wisata sebagai oleh-oleh. Akan tetapi pelaku UMKM dan Penrajin memiliki kelemahan pembukuan usaha terlebih lagi dalam penetuan biaya produksi produk inovatif. Mereka hanya memperhitungkan biaya bahan baku sebagai komponen biaya produksi.   Tim pengabdian FEB Universitas melaksanakan pengabdian  untuk memberikan materi mengenai konsep perhitungan biaya produksi yang dilakukan dengan interaktif.     Kata Kunci: Desa Kemuning, Harga Pokok Poduksi, Smart Village   Abstract:  Kemuning Villages is one of the villages located in Ngargoyoso district, Karanganyar Regency, Central Java Province. Geographically, Kemuning Village is bordered to the west by Ngargoyoso Village, to the east by Segoro Gunung Village, to the north by Jenawi District and to the south by Girimulyo Village. Kemuning village has a mission to be realized, namely the Tourism Village. The local government provides training to make innovative products to complement the needs of a tourism village for MSMEs and craftsmen. These innovative products will be sold to tourist visitors as souvenirs. However, SMEs and craftsmen have weaknesses in business bookkeeping, especially in determining the cost of producing innovative products. They only take into account the cost of raw materials as a component of production costs. The Team from FEB University Pancasila carried out the service to provide material on the concept of calculating production costs which was carried out interactively.     Keywords: Desa Kemuning, Cost of Good Sold, Smart Village

Sign in / Sign up

Export Citation Format

Share Document