scholarly journals Features of introduction of biogas technologies in the conditions of industrial enterprises of the metallurgical industry

2019 ◽  
pp. 49-54
Author(s):  
Kovalenko Viktor ◽  
Kuznetsova Alisa ◽  
Kuznetsov Vitalii
Keyword(s):  
Calorific Value ◽  
Metallurgical Industry ◽  
Economic Feasibility ◽  
Point Of View ◽  
Iron Sulfate ◽  
Economic Point ◽  
Advantages And Disadvantages ◽  
Industrial Enterprises ◽  
Heating Furnaces ◽  
Wide Range

The paper analyzes and classifies the advantages and disadvantages of existing technologies for cleaning hydrogen sulfide and increasing calorific value by enriching biogas mixtures from various sources. Among them are identified those that are most acceptable from an economic point of view for implementation in heavy industry. A list of available methods and relatively inexpensive reagents for the treatment of biogas in the conditions of metallurgical enterprises, among which technical and ammonia water, waste from steel pickling processes in the form of iron sulfate, and others, is established. The main fuel characteristics of biogas of various origin and composition and natural gas are compared in determining the directions of using alternative fuel in industrial heating plants. It was determined that thermal and heating furnaces have the greatest potential for adaptation to biogas combustion, since such units are able to work in a wide range of quality, fuel consumption and calorific value. Since the scientific base regarding the possible conversion of these plants to biogas is unstructured, and in many aspects is absent, the creation of appropriate methods, mathematical apparatus and algorithmic tools in this direction is an urgent task. Keywords: energy efficiency, biogas technologies, biogas, gas, purification, enrichment, industrial furnaces, economic feasibility

scholarly journals Determination of economic efficiency of using biogas in the conditions of industrial enterprises

2019 ◽  
pp. 12
Author(s):  
Kovalenko Viktor
Keyword(s):  
Natural Gas ◽  
Initial Conditions ◽  
Cost Effective ◽  
Fuel Mixture ◽  
Metallurgical Industry ◽  
Economic Feasibility ◽  
Economic Indicators ◽  
Power Equipment ◽  
Industrial Enterprises ◽  
Heating Furnaces

To determine the efficiency of biogas use in the existing industrial enterprises of the metallurgical industry of Ukraine and Zaporizhia region, in particular, the basic economic indicators of conversion of standard furnace equipment to biogas mixtures from various derivatives and sources available in the region are calculated. The technical feasibility and economic feasibility of using biogas mixtures as an alternative fuel for energy supply of thermal and heating furnaces of industrial enterprises on the example of a real object are determined. It is shown that to use low-calorie fuel in power equipment, taking into account its quality indicators, it is expedient both separately and in combination with traditional energy sources. It is revealed that the economic indicators of projects for the introduction of biogas technologies at metallurgical enterprises differ depending on many initial conditions, such as: sources of origin and chemical composition of biogas; characteristics of power equipment that is converted to such fuel; the proportion of natural gas substitution in the fuel mixture; etc. Based on the trend of constant growth in the cost of traditional energy resources, the introduction and use of their alternative and renewable counterparts in energy-intensive metallurgical enterprises is relevant and, with the right approach, cost-effective Keywords: energy efficiency, biogas technologies, biogas, natural gas, purification, enrichment, industrial furnaces, economic feasibility

Outlining a stepwise, multi-parameter debris flow monitoring and warning system: an example of application in Aizi Valley, China

2020 ◽  
Author(s):  
Ningsheng Chen
Keyword(s):  
Debris Flow ◽  
Early Warning ◽  
Pressure Sensors ◽  
Warning System ◽  
Point Of View ◽  
Economic Point ◽  
Flow Monitoring ◽  
Vibration Sensors ◽  
Wide Range ◽  
Critical Rainfall

<p>Abstract: In recent years, the increasing frequency of debris flow demands enhanced effectiveness and efficiency are essential not only from an economic point of view but are also considered as a frontline approach to alleviate hazards. Currently, the key issues are the imbalance between the limited lifespan of equipment, the relatively long period between the recurrences of such hazards, and the wide range of critical rainfall that trigger these disasters. This paper attempt to provide a stepwise multi-parameter debris flow warning system after taking into account the shortcomings observed in other warning systems. The whole system is divided into five stages. Different warning levels can be issued based on the critical rainfall thresholds. Monitoring starts when early warning is issued and it continues with debris flow near warning, movement warning and hazard warning stages. For early warning, historical archives of earthquake and drought are used to choose a debris flow susceptible site for further monitoring, Secondly, weather forecasts provide an alert of possible near warning. Hazardous precipitation, model calculation and debris flow initiation tests, pore pressure sensors and water content sensors are combined to check the critical rainfall and to publically announce a triggering warning. In the final two stages, equipment such as rainfall gauges, flow stage sensors, vibration sensors, low sound sensors and infrasound meters are used to assess movement processes and issue hazard warnings. In addition to these warnings, community-based knowledge and information is also obtained and discussed in detail. The proposed stepwise, multi-parameter debris flow monitoring and warning system has been applied in Aizi valley China which continuously monitors the debris flow activities.</p>

Emission Distribution and Regulation of Local Heat Source

2012 ◽  
Vol 326-328 ◽  
pp. 330-334 ◽  
Author(s):  
Jan Valíček ◽  
Jana Müllerová ◽  
Vlastimil Kuběna ◽  
Pavel Koštial ◽  
Marta Harničárová ◽  
...  
Keyword(s):  
Particulate Matter ◽  
Chemical Composition ◽  
Human Health ◽  
Fossil Fuels ◽  
Local Heating ◽  
Point Of View ◽  
Total Production ◽  
Economic Point ◽  
Automated Method ◽  
Wide Range

Pollutants can be classified according to their chemical composition, harmfulness, hazardousness, risk rate and toxicity. The most monitored pollutants are particulate matter (PM), carbon monoxide (CO), nitrogen oxide (NOx), sulfur dioxide (SO2), organic substances which are in the form of gaseous phase in waste gases expressed as total organic carbon, dibenzodioxins and dibenzofurans [1-3]. Other pollutants are divided into several groups and subgroups, such as substances with carcinogenic effects (asbestos, Co, Cd, Be, Ni, As, Cr, dioxins, etc.), solid inorganic contaminants (He, Se, animony, and others) and inorganic pollutants in the form of gases (HCl, HF, ammonia, etc.), organic gases and vapours (phenol, toluene, acetone and many others) and gases causing the greenhouse effect (CO2, methane, N2O, hydrofluorocarbons, etc.). The term particulate matter, or suspended matter refers to the emissions of a wide range of wind drift solids and liquid particles of material in size from several nanometres up to 0.5 mm, which stay in the air for some time. This is a major component of atmospheric pollution, which contributes to harmful effects not only on human health but also on intensity of materials degradation. Into the atmosphere, where we can meet them, regardless of particle size and chemical composition, in the form of a complex heterogeneous mixture, they are released from burning fossil fuels and also from burning biomass-based fuels, while domestic heating accounts for about 16% of the total production of particulate matter [4,5,6]. This percentage represents a degree of imperfect combustion of fuels used in local heating. Emissions from incomplete combustion are undesirable from the point of view of human health as well as from the economic point of view, because this leads to the degradation of materials. Nevertheless, since fuel combustion is necessary for the society, emissions are still produced. This paper presents an automated method of perfect combustion control in local heating in order to minimize emissions being produced.

scholarly journals Direct Current (DC) Motor Speed and Direction Controller

2021 ◽  
Vol 2129 (1) ◽  
pp. 012035
Author(s):  
Nurshahirah Shaharudin ◽  
Mohd Zamri Hasan ◽  
Syatirah Mohd Noor
Keyword(s):  
Direct Current ◽  
Pulse Width Modulation ◽  
Speed Control ◽  
Dc Motor ◽  
Point Of View ◽  
Motor Speed ◽  
Variable Speed Drives ◽  
Variable Resistor ◽  
Economic Point ◽  
Wide Range

Abstract The direct current motor is an important drive configuration for many applications across a wide range of power and speeds. It has variable characteristics and is used extensively in variable-speed drives. The goals of this project are to control the direction and speed of a Direct Current (DC) motor. Due to the advancement of wireless technology, there are several communication devices introduced such as GSM, Wi-Fi, ZIGBEE and Bluetooth. Each of the connections has its own unique specification and application. Among these wireless connections, Bluetooth technology is often implemented and can be sent from the mobile phone at a distance of 10 meters. The speed control was implemented using Bluetooth technology to provide communication access from a smartphone. Instead, the ARDUINO UNO platform can be used to quickly promote electronic systems. And an electronics technique is called Pulse Width Modulation (PWM) is used to achieve speed control, and this technique generates high and low pulses, then these pulses vary the speed in the motor. In order to control this PWM pulse, variable resistors are used and depend on it the speed of the DC motor will increase or decrease. The variable resistor is adjusting to varying the speed of the motor, and the higher the resistance the lower the speed of the motor rotates. The direction of the motor is controlled by the relay by giving and giving a command on the virtual terminal. The speed of the motor is directly proportional to the resistance as the speed increased after the resistance also increased and vice versa. The significance of this study is practical and highly feasible from the economic point of view and has the advantage of running the motor at a higher rating in term of a reliable, durable, accurate and efficient way of controlling speed and direction control.

scholarly journals PROBLEMS OF FORMATION OF INCOME AND EXPENSES OF PRIVATE CONTRACTORS AS SUBJECTS OF INDEPENDENT PROFESSIONAL ACTIVITY

2019 ◽  
pp. 68-78
Author(s):  
Tetyana Fomina
Keyword(s):  
Comparative Method ◽  
Legal Aspects ◽  
Point Of View ◽  
Professional Activity ◽  
Court Decisions ◽  
Economic Point ◽  
Advantages And Disadvantages ◽  
Set Up ◽  
And Control ◽  
Private Contractor

Introduction. The need to set up a private enforcement institute arose from the problem of enforcement of court decisions. The activities of state executors are clearly regulated, have experience and achievements. A private contractor is authorized by the state to carry out enforcement activities, but from an economic point of view, he is a self-employed person, which means that he is financially interested in the results of his work. The economic aspect of private contractor activity is not well understood to date. Methods. The study is based on the use of the historical and comparative method in determining the prerequisites for establishing an institute of private performers in Ukraine and in the world. A generalization method was used to determine general properties in the taxation of private contractors. The efficiency of the work and the feasibility of introducing a “private” element in the enforcement of court decisions was proved by the method of analysis. The method of grouping was used to determine the taxation base for the performance of private contractors. Results. The organizational and legal aspects of the activity of private contractors have been determined. The economic advantages and disadvantages of introducing the Institute of Private Performers are presented. The procedure for recognition of income and formation of costs of private contractors is outlined. It is proved inadmissible to identify the concepts of “costs of enforcement proceedings” and “costs of private executors”. The necessity of accounting and control of results of activity of private contractors is substantiated. Discussion. Prospects for further researches will be to develop recommendations for accounting for deposit accounts; accounts intended to be credited to enforcement proceedings; accounts intended to account for the principal and additional remuneration of private contractors; payroll calculations; payments with budget for taxes, fees, other required payments private artist revenue and expenses, etc. Keywords: enforcement proceedings, self-employed entities, private contractor, remuneration of private contractor, costs of enforcement proceedings, costs of private contractor, income of private contractor.

scholarly journals Economic Evaluation and Techno-Economic Sensitivity Analysis of a Mass Integrated Shrimp Biorefinery in North Colombia

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2397
Author(s):  
Antonio Zuorro ◽  
Kariana Andrea Moreno-Sader ◽  
Ángel Darío González-Delgado
Keyword(s):  
Sensitivity Analysis ◽  
Economic Evaluation ◽  
Net Present Value ◽  
Raw Materials ◽  
Integrated Approach ◽  
Economic Feasibility ◽  
Point Of View ◽  
Economic Point ◽  
The North ◽  
Water Pinch

The high freshwater consumption requirements in shrimp biorefinery approaches represents one of the major drawbacks of implementing these technologies within the shrimp processing industry. This also affects the costs associated with the plant operation, and consequently, the overall economic performance of the project. The application of mass integration tools such as water pinch analysis can reduce frewshwater consumption by up to 80%, contributing to shrimp biorefinery sustainability. In this work, the economic evaluation and the techno-economic sensitivity analysis for a mass integrated approach for shrimp biorefinery were performed to determine the economic feasibility of the project when located in the North-Colombia region and to identify the critical techno-economic variables affecting the profitability of the process. The integrated approach designed to process 4113.09 tons of fresh shrimp in Colombia reaches a return on investment (%ROI) at 65.88% and a net present value (NPV) at 10.40 MM USD. The process supports decreases of up to 28% in capacity of production and increases of 12% and 11% in the cost of raw materials and variable operating costs without incurring losses, respectively. These findings suggest that the proposed design of the water recycling network coupled to a shrimp biorefinery approach is attractive from an economic point of view.

Cryptospordiosis: An infectious emerging protozoan zoonosis of public health significance

2021 ◽  
Vol 6 (4) ◽  
pp. 161-163
Author(s):  
Mahendra Pal ◽  
Mati Roba Bulcha ◽  
Adugna Girma Lema ◽  
Sena Roba Bulcha
Keyword(s):  
Public Health ◽  
Point Of View ◽  
Watery Diarrhea ◽  
Low Grade ◽  
Economic Point ◽  
Source Of Infection ◽  
Animal Populations ◽  
Wide Range ◽  
The World ◽  
Hygienic Measures

Zoonoses caused by diverse etiological agents, are important from public health and economic point of view, and are reported in humans and animals from developing and developed nations of the world. Cryptosporidiosis is an emerging food and waterborne zoonotic protozoan disease that has been detected in both human and animal populations all over the world. The source of infection is exogenous, and the ingestion of contaminated food and water is the principal mode of transmission. The oocysts of Cryptosporidium are abundant and pervasive in ambient water, where they can survive for months. It prefers epithelial cells found in the digestive tracts of a wide range of hosts. Waterborne transmission through drinking water or a swimming pool is common, resulting in outbreaks in several nations throughout the world. The disease can manifest itself in sporadic or epidemic forms. The infection has been recorded in immunocompetent and immunocompromised individuals. The watery diarrhea, abdominal cramps, nausea, anorexia and low grade fever are most commonly observed symptoms. The laboratory help is required to make an unequivocal diagnosis of disease. The preventive strategies include excellent hygienic measures to avoid the contamination of food and water by oocysts of Cryptosporidium. In addition, the role of veterinarian is highly imperative for the management of disease in domestic animals.

scholarly journals Environmental factors influence on leeches distribution in the middle reaches of the Irtysh River

2020 ◽  
Vol 9 (4) ◽  
pp. 159-164
Author(s):  
Lyudmila Ivanovna Fedorova
Keyword(s):  
Natural Waters ◽  
Metallurgical Industry ◽  
Climatic Conditions ◽  
Ecological Niches ◽  
Landscape Characteristics ◽  
Industrial Enterprises ◽  
Wide Range ◽  
Irtysh River ◽  
The Impact ◽  
The Irtysh River

The Irtysh River is a transboundary watercourse that exhibits a wide range of climatic conditions, environments and ecological niches. As a result of the technogenic impact of industrial enterprises on surface and underground waters all the main tributaries of the middle reaches of the river Irtysh are in different degrees of pollution. Due to the impact of sewage and other wastes from the mining and metallurgical industry, in the waters of the river basin Irtysh the concentration excess of a number of toxic metals is observed. Among the invertebrates used to assess the state of natural waters, representatives of the Annelida type are often used. Since annelids are among the most common organisms on Earth, this makes it possible to study them in many regions and to assess the specificity of the impact and compare the impact of various pollutants in similar natural and climatic zones. It is known that the distribution of freshwater leeches is largely determined by natural and climatic conditions, landscape characteristics and the specifics of trophic connections, etc. In this case, the most important parameters are the physicochemical properties of water. This paper provides information on the factors influencing the species composition and structural indicators of leech communities living in the middle reaches of the Irtysh River.

scholarly journals Mites (Acari) important in different agroecosystems and their control in Romania*

Zoosymposia ◽  
2011 ◽  
Vol 6 (1) ◽  
pp. 45-50
Author(s):  
IOAN ROSCA ◽  
MINODORA GUTUE ◽  
CATALIN GUTUE
Keyword(s):  
Crop Production ◽  
Agricultural Land ◽  
Point Of View ◽  
Effective Control ◽  
Active Ingredients ◽  
Polyphagotarsonemus Latus ◽  
Commercial Products ◽  
Economic Point ◽  
Wide Range ◽  
Broad Mite

Mite problems in different agroecosystems in Romania are presented. Of all phytophagousmites known in the country, four species are found on a wide range of crops, with the two-spotted spider mite, Tetranychus urticae Koch, and the broad mite, Polyphagotarsonemus latus (Banks), being the most important. The broad mite is difficult to control, but acaricides registered in Romania have provided effective control of this species. Reduction of highly toxic pesticide residues in the environment has been considered important in the country. That could be approached by first reducing the amount of pesticides applied on agricultural land, and second, by finding new pesticides with less toxic active ingredients. This has resulted in reduced numbers of the main groups of pesticides, commercial products and number of active substances. The number of available commercial products varied from12 in 1972–1979 to five in 1980–1989, ten in 1990–1996, four in 1997–2004 and six in 2010, based on five active ingredients. The causes of the decreasing numbers of acaricide products or active ingredients were the reduced availability of several active ingredients due to toxicological or environmental reasons and the high registration cost. Only three acaricides (Envidor 240 SC, Nissorun 10WP and Omite 570 EC) and one insecticide/acaricide (Seizer 10 EC) are at present commonly used in Romanian agriculture.At the same time, from the economic point of view, biological control is impractical if not impossible to be applied in commercial crop production under Romanian economical conditions of farmers in absence of subsidies. EU and Romanian policies are discussed.

scholarly journals SHIP2FAIR – Martini & Rossi: integration of Solar Heat in Industrial Process – Preliminary evaluation

2019 ◽  
Vol 113 ◽  
pp. 03018 ◽  
Author(s):  
Stefano Barberis ◽  
Francesco Peccianti ◽  
Luca Castellino ◽  
Thomas Bolognesi ◽  
Alessandro Bortoletto
Keyword(s):  
Industrial Process ◽  
Economic Feasibility ◽  
Point Of View ◽  
Solar Irradiation ◽  
Preliminary Evaluation ◽  
Solar Collectors ◽  
Economic Point ◽  
Solar Heat ◽  
Funded Project ◽  
Definition Of

SHIP2FAIR is a H2020 European funded project†, which aim to foster the integration of solar heat in industrial processes from the agro-food sector facilitating the integration of solar heat production in low temperature processes. Based on the assessment of the industrial process for the production of different spirits and the local solar potential in Pessione plant (TO) of Martini & Rossi – one of the four demosite of the project -, the preliminary results that guided the choice of the most suitable solar collectors (Fresnel) and the definition of the thermo-economic parameters for the solar plant are hereby presented. The preliminary assessment takes into account different perspectives from the industrial and economic point of view: the availability of suitable surfaces, the economics of the investment and the best processes to be fed by solar produced steam towards a preliminary techno-economic feasibility study. The starting points for the analysis have been the characterization of the thermal demand in terms of necessary temperature level (°C), overall consumption and time distribution. The following step has been the identification of the suitable collectors to be installed taking into account the thermal parameters presented before, the boundary conditions of the industrial facility (e.g. space available, orientation, etc.), the technical characteristics of the collector itself and the solar irradiation available considering the plant’s location. Moreover, the complex thermal facility in the factory, constituted by multiple (3) gas boilers and a Combined Heat and Power (CHP) plant in two different but linked pressurized steam loops, is taken into account for the definition of the solar collectors configuration and their integration via the proper management of heat generators and storage. The calculations are based on the expected thermal (steam) production guaranteed by the solar collectors and avoided GHG based on the reduction of gas fired boilers consumption.

Sign in / Sign up

Export Citation Format

Share Document