scholarly journals QUANTITATIVE EVALUATION OF THE POSSIBILITY OF EUROPEAN INTEGRATION OF POST-SOVIET COUNTRIES

2020 ◽  
pp. 11-23
Author(s):  
Pavlenko I. ◽  
Salli V.
Keyword(s):  
Capital Investment ◽  
Absolute Risk ◽  
Cost Effective ◽  
Raw Material ◽  
Material Development ◽  
Industrial Sectors ◽  
World Demand ◽  
External Conditions ◽  
Labor Resources ◽  
The Stability

The subject of this article is the analysis of integration processes at an interstate level and within individual business groups, as well as the economic links of all participants in market relations which provide real opportunities for a more intensive movement of capital into new, highly efficient, at the same time more risky markets. The aim is to explain the principles of re-evaluating the investment attractiveness and the level of safety of many quite cost-effective capital investment options. The effectiveness of the decision made will depend on which of the possible situations in the external environment will actually take place. Fundamental to this approach is the ability to make the most out of the resources that the country possess - minerals. infrastructure, labor resources, etc., since ultimately this will determine the degree of its efficiency, its internal order. The rate of the stability of the system, the expectedness and predictability of its development are characterized by the concept of entropy. The principal of this approach is that the following is used as initial data: the volumes of transit traffic, the capacities of the enterprises being created, the volumes of the alienated territories. To adjust the parameters, the indicators related to the creation of new jobs and labor productivity for each analyzed investment program were used. At the same time, the investment risk is measured by the absolute value of possible losses in monetary terms. Accordingly, options for the development of external conditions are assigned, alternatives for tackling an issue are set and the effectiveness of each alternative and risks in various conditions should be determined. An important aspect of this approach is the ability to identify areas of high and absolute risk. This study confirms the following hypothesis. The potential for an export and raw material development of the economies of the post-Soviet countries has been exhausted, nevertheless, they have the opportunity to obtain strategic benefits from the current situation based on the stable world demand for provision, creating conditions for the rational directing resources into promising industries with the aim of developing industrial and post-industrial sectors in the country’s economy.

Teknologi Esktrasi dan Cara Pemisahannya untuk Mendapatkan Kembali Karotenoid dari Minyak Sawit : Suatu Tinjauan

2016 ◽  
Vol 9 (1) ◽  
pp. 80-95
Author(s):  
Agus Sudibyo ◽  
Sardjono Sardjono
Keyword(s):  
Vitamin A ◽  
Palm Oil ◽  
Beta Carotene ◽  
Cost Effective ◽  
Raw Material ◽  
Extraction And Separation ◽  
Molecular Product ◽  
Industrial Use ◽  
Palm Oil Mill ◽  
Selection Of

Crude palm oil (CPO)is the richest natural plant source of carotenoids in terms of retinol (pro-vitamin A) equivalent, whereas palm oil mill effluent (POME) is generated from palm oil industry that contains oil and carotenes that used to be treated before discharge. Carotenoids are importance in animals and humans for the purpose of the enhancement of immune response, conversion of vitamin A and scavenging of oxygen radicals. This component has different nutritional  functions and benefits to humaan health. The growing interest in the other natural sources of beta-carotene and growing awareness to prevent pollution has stimulated the industrial use of CPO and POME as a raw material for carotenoids extraction. Various technologies of extraction and separation have been developed in order to recover of carotenoids.This article reports on various technologies that have been developed in order to recover of carotenoids from being destroyed in commercial refining of palm oil and effects of some various treatments on the extraction end separation for carotenoid from palm oil and carotenoids concentration. Principally, there are different technologies, and there is one some future which is the use of solvent. Solvent plays important role  in the most technologiest, however the problem of solvents which are used is that they posses potentiaal fire health and environmental hazards. Hence selection of the  most safe, environmentally friendly and cost effective solvent is important to design of alternative extraction methods.Chemical molecular product design is one of the methods that are becoming more popular nowadays for finding solvent with the desired properties prior to experimental testing.ABSTRAKMinyak sawit kasar merupakan sumber karotenoid terkaya yang berasal dari tanaman sawit sebagai senyawa yang sama dengan retinol atau pro-vitamin A; sedangkan limbah pengolahan minyak sawit dihasilkan dari industri pengolahan minyak sawit yang berisi minyak dan karotene yang perlu diberi perlakuan terlebih dahulu sebelum dibuang. Karotenoid merupakan bahan penting yang diperlukan pada hewan dan manusia guna memperkuat tanggapan terhadap kekebalan, konversi ke vitamin A dan penangkapan gugus oksigen radikal. Dengan berkembangnya ketertarikan dalam mencari beta-karotene yang bersumber dari alam lain dan meningkatnya kesadaran untuk mencegah adanya pencemaran lingkungan, maka mendorong suatu industri untuk menggunakan CPO dan POME sebagai bahan baku untuk diekstrak karotenoidnya. Berbagai macam teknologi guna mengekstrak dan memisahkan karotenoid telah dikembangkan untuk mendapatkan kembali karotenoidnya. Makalah ini melaporkan dan membahas berbagai jenis teknologi yang telah dikembangkan guna mendapatkan kembali senyawa karotenoid dari kerusakan di dalam proses pemurnian minyak sawit secara komersial dan pengaruh beberapa perlakuan terhadap ekstrasi dan pemisahan karotenoid dari minyak sawit dan konsentrasi karotenoidnya. Pada prinsipnya, berbagai teknologi yang digunakan untuk mengekstrak dan memisahkan karotenoid terdapat perbedaan, dan terdapat salah satu teknologi yang digunakan untuk esktrasi dan pemisahan karotenoid adalah menggunakan bahan pelarut. Pelarut yang digunakan mempunyai peranan yang penting dalam teknologi ekstrasi; namun pelarut yang digunakan untuk mengekstrak tersebut mempunyai persoalan karena berpotensi mengganggu kesehatan dan membahayakan cemaran lingkungan. Oleh karena itu, pemilihan jenis teknologi yang aman, ramah terhadap lingkungan dan biaya yang efektif untuk penggunaan pelarut merupakan hal penting sebelum dilakukan desain metode/teknologi alternatif untuk esktrasi karotenoid. Pola produk molekuler kimia merupakan salah satu metode yang saat ini menjadi lebih populer untuk mencari pelarut dengan sifat-sifat yang dikehendaki sebelum diujicobakan. Kata kunci :    karotenoid, ekstrasi, pemisahan, teknologi, minyak sawit kasar, limbah industri pengolahan sawit.

scholarly journals End-of-Life Alternatives of Glass Reinforced Polyester Boat Hulls Compared by LCA

2018 ◽  
Vol 27 (4) ◽  
pp. 096369351802700 ◽  
Author(s):  
Mehmet Önal ◽  
Gökdeniz Neşer
Keyword(s):  
End Of Life ◽  
Environmental Impacts ◽  
Raw Materials ◽  
Weight Ratio ◽  
Cost Effective ◽  
Raw Material ◽  
Photochemical Oxidation ◽  
Human Toxicity ◽  
Vacuum Infusion ◽  
Infusion Method

Glass reinforced polyester (GRP), as a thermoset polymer composites, dominates boat building industry with its several advantages such as high strength/weight ratio, cohesiveness, good resistance to environment. However, proper recovering and recycling of GRP boats is became a current environmental requirement that should be met by the related industry. In this study, to propose in a cost effective and environmentally friendly way, Life Cycle Assessment (LCA) has been carried out for six scenarios include two moulding methods (namely Hand Lay-up Method, HLM and Vacuum Infusion Method, VIM) and three End-of-Life (EoL) alternatives(namely Extruding, Incineration and Landfill) for a recreational boat's GRP hulls. A case study from raw materials purchasing phase to disposal/recycling stages has been established taking 11 m length GRP boat hull as the functional unit. Analysis show that in the production phase, the impacts are mainly due to the use of energy (electricity), transport and raw material manufacture. Largest differences between the methods considered (HLM and VIM) can be observed in the factors of marine aquatic ecotoxicity and eutrophication while the closest ones are abiotic depletion, ozon layer depletion and photochemical oxidation. The environmental impact of VIM is much higher than HLM due to its higher energy consumption while vacuum infusion method has lower risk than hand lay-up method in terms of occupational health by using less raw material (resin) in a closed mold. In the comparison of the three EoL techniques, the mechanical way of recycling (granule extruding) shows better environmental impacts except terrestrial ecotoxicity, photochemical oxidation and acidification. Among the EoL alternatives, landfill has the highest environmental impacts except ‘global warming potential’ and ‘human toxicity’ which are the highest in extrusion. The main cause of the impacts of landfill is the transportation needs between the EoL boats and the licenced landfill site. Although it has the higher impact on human toxicity, incineration is the second cleaner alternative of EoL techniques considered in this study. In fact that the similar trend has been observed both in production and EoL phases of the boat. It is obvious that using much more renewable energy mix and greener transportation alternative can reduce the overall impact of the all phases considerably.

scholarly journals A Novel Approach to Fabricate Foam Ceramics from Steel Slag

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Yu Zheng ◽  
Xudong Luo ◽  
Jinlong Yang ◽  
Wenlong Huo ◽  
Chi Kang
Keyword(s):  
Compressive Strength ◽  
Ph Value ◽  
Steel Slag ◽  
Raw Material ◽  
Solid Loading ◽  
Insulation Material ◽  
Ceramic Foams ◽  
Novel Approach ◽  
The Stability ◽  
First Time

A novel approach is used for fabricating steel slag foam ceramics based on the particle-stabilized foaming method. In this work, steel slag was used as the raw material and propyl gallate (PG) was used as the surface modifier. For the first time, steel slag ceramic foams were successfully fabricated based on particle-stabilized foams. The results show that the stability of the ceramic foams was closely related to the pH value and PG concentration. The porosity and compressive strength could be controlled by changing the solid loading of steel slag and sintering temperature. The porosity of steel slag foam ceramics ranged from 85.6% to 62.53%, and the compressive strength was from 1.74 MPa to 10.42 MPa. The thermal conductivity of steel slag foam ceramics was only 0.067 W (m·K)−1, which shows that it could be used as a thermal insulation material.

Study on Influence of Silicate Morphology Based on pH Value

2012 ◽  
Vol 454 ◽  
pp. 324-328
Author(s):  
Yan He ◽  
Ya Jing Liu ◽  
Yong Lin Cao ◽  
Li Xia Zhou
Keyword(s):  
Silicic Acid ◽  
Ph Value ◽  
Colorimetric Method ◽  
Absorption Spectrometry ◽  
Degree Of Polymerization ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ph Values ◽  
The Stability

Infra-red absorption spectrometry, X-ray diffraction observations and characterization tests based on silicon molybdenum colorimetric method were used to investigate the optimal pH value controlling the stability of the silicic acid form. The experiment process was done by using sodium silicate as raw material. The results showed that the solution of silicate influenced the polymerization. The active silicic acid solution with a certain degree of polymerization was obtained by controlling the pH values.

Advances in absorbents and techniques used in wet and dry FGD: a critical review

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Lokesh Kumar ◽  
Susanta Kumar Jana
Keyword(s):  
Power Plants ◽  
Low Cost ◽  
Fine Particulate Matter ◽  
Packed Column ◽  
Toxic Substance ◽  
Cost Effective ◽  
Solid Wastes ◽  
Raw Material ◽  
Process Industries ◽  
Slurry Bubble Columns

Abstract Sulfur dioxide is considered as an extremely harmful and toxic substance among the air pollutants emitted from the lignite- and other high-sulfur-coal based power plants, old tires processing units, smelters, and many other process industries. Various types of absorbents and desulfurization technologies have been developed and adopted by the industries to reduce the emission rate of SO2 gas. The present paper focuses on the ongoing advances in the development of varieties of regenerative and non-regenerative absorbents viz., Ca-based, Mg-based, Fe-based, Na-based, N2-based, and others along with various FGD technology, viz., wet, dry or semi-dry processes. Additionally, different types of contactors viz., packed column, jet column, spray tower, and slurry bubble columns along with their significant operational and design features have also been discussed. In the existing or newly installed limestone-based FGD plants, an increasing trend of the utilization of newly developed technologies such as limestone forced oxidation (LSFO) and magnesium-enhanced lime (MEL) are being used at an increasing rate. However, the development of low-cost sorbents, particularly suitable solid wastes, for the abatement of SO2 emission needs to be explored sincerely. Many such wastes cause air pollution by way of entrainment of fine particulate matter (PM), groundwater contamination by its leaching, or brings damage to crops due to its spreading onto the cultivation land. One such pollutant is marble waste and in this work, this has been suggested as a suitable substitute to limestone and cost-effective sorbent for the desulfurization of flue gases. The product of this process being sellable in the market or may be used as a raw material in several industries, it can also prove to be an important route of recycling and reuse of one of the air and water-polluting solid wastes.

scholarly journals Evaluating Disruptive Innovation Project Management Capabilities

2020 ◽  
Vol 13 (1) ◽  
pp. 1
Author(s):  
Mikel Zubizarreta ◽  
Jaione Ganzarain ◽  
Jesús Cuadrado ◽  
Rafael Lizarralde
Keyword(s):  
Project Management ◽  
New Technologies ◽  
Business Environment ◽  
Disruptive Innovation ◽  
Management Model ◽  
Business Sustainability ◽  
Industrial Sectors ◽  
Innovation Project ◽  
The Stability ◽  
Management Capabilities

Firms must adapt to a business environment in constant flux. Economic and political factors and the constant interruption of new technologies force firms and organizations to change and to adapt, so that they are not left behind. Over recent years, the development of disruptive innovations has completely revolutionized past scenarios. These innovations break with what is already established and firms from various sectors face no choice other than to incorporate them into their project management portfolios, so as to ensure survival and business sustainability. Using MIVES methodology as its foundation, a business sustainability management model is presented in this paper for the management of disruptive innovation projects that a firm may wish to develop within a given sector. The management model is designed to facilitate disruptive innovation project management for firms within technological-industrial sectors, by assessing the sustainability of the project. The model is applied to two firms, one from the machine-tooling sector and another from the construction sector. Finally, a sensitivity analysis was performed, the results of which verified the validity and the stability of the proposed model.

scholarly journals Communicating 5-Year Risk of Alzheimer’s Disease Dementia: Development and Evaluation of Materials that Incorporate Multiple Genetic and Biomarker Research Results

2020 ◽  
pp. 1-14
Author(s):  
Jessica Mozersky ◽  
Sarah Hartz ◽  
Erin Linnenbringer ◽  
Lillie Levin ◽  
Marissa Streitz ◽  
...  
Keyword(s):  
Alzheimer’S Disease ◽  
Older Adults ◽  
Alzheimer's Disease ◽  
Absolute Risk ◽  
Brain Mri ◽  
Community Dwelling ◽  
Educational Materials ◽  
Research Results ◽  
Material Development ◽  
Biomarker Research

Background: Cognitively normal (CN) older adults participating in Alzheimer’s disease (AD) research increasingly ask for their research results—including genetic and neuroimaging findings—to understand their risk of developing AD dementia. AD research results are typically not returned for multiple reasons, including possible psychosocial harms of knowing one is at risk of a highly feared and untreatable disease. Objective: We developed materials that convey information about 5-year absolute risk of developing AD dementia based on research results. Methods: 20 CN older adults who received a research brain MRI result were interviewed regarding their wishes for research results to inform material development (Pilot 1). Following material development, 17 CN older adults evaluated the materials for clarity and acceptability (Pilot 2). All participants were community-dwelling older adults participating in longitudinal studies of aging at a single site. Results: Participants want information on their risk of developing AD dementia to better understand their own health, satisfy curiosity, inform family, and future planning. Some articulated concerns, but the majority wanted to know their risk despite the limitations of information. Participants found the educational materials and results report clear and acceptable, and the majority would want to know their research results after reviewing them. Conclusion: These materials will be used in a clinical study examining the psychosocial and cognitive effects of offering research results to a cohort of CN older adults. Future AD research may incorporate the return of complex risk information to CN older adults, and materials are needed to communicate this information.

ANALYSIS OF SCIENTIFIC DEVELOPMENTS IN THE FIELD OF FUNCTIONAL BEVERAGES FOR SPORTS NUTRITION BASED ON PATENT DATABASES

2020 ◽  
Author(s):  
А.О. ЕВСЮКОВА
Keyword(s):  
Russian Federation ◽  
Sports Nutrition ◽  
Raw Material ◽  
Physical Culture ◽  
Industrial Complex ◽  
Production Volume ◽  
Innovative Products ◽  
Functional Beverages ◽  
The Russian Federation ◽  
The Stability

Согласно данным проекта Стратегии развития физической культуры и спорта в Российской Федерации до 2030 года, в 2008–2019 гг. численность систематически занимающегося физической культурой и спортом населения выросла в 2,5 раза. Это обусловливает необходимость создания инновационных продуктов для людей занимающихся спортом. Для определения перспектив создания продуктов специального назначения, в частности функциональных напитков для спортивного питания, проведен анализ патентов в этой области. Объектом анализа были 59 патентов, опубликованных с 1995 г. по май 2020 г. и занесенных в отечественную – ФИПС и международные – EAPATIS, USPTO, EPO, CISPATANT базы данных. Проанализированы следующие подклассы изобретений по актуализированной версии МПК: A23C, A23D, A23F, A23G, A23J, A23K, A23L, A61K, A61P, C12G. Результаты исследований представлены на рисунках в виде диаграмм. Установлено, что производство функциональных напитков для спортивного питания активно развивается. Российская Федерация имеет преимущество по количеству зарегистрированных патентов в этой области, но по объему производства продукции уступает зарубежным странам. Поскольку продукция агропромышленного комплекса России вполне удовлетворяет требованиям потребителей к натуральности сырьевого состава продукта, для обеспечения стабильности внутреннего рынка перспективно развитие отечественного производства функциональных напитков для спортивного питания. According to the draft strategy for the development of physical culture and sports in the Russian Federation until 2030, in 2008–2019, the number of people systematically engaged in physical culture and sports increased by 2,5 times. This makes it necessary to create innovative products for people involved in sports. To determine the prospects for creating special-purpose products, in particular functional beverages for sports nutrition, an analysis of patents in this area was conducted. 59 patents published from 1995 to may 2020 and included in the national – FIPS and international – EAPATIS, USPTO, EPO, CISPATANT databases were the object of analysis. Subclasses of inventions according to the updated version of the IPC A23C, A23D, A23F, A23G, A23J, A23K, A23L, A61K, A61P and C12G are analyzed. The results of the research are presented in figures in the form of diagrams. It is established that the production of functional beverages for sports nutrition is actively developing. The Russian Federation has an advantage in the number of registered patents in this area, but in terms of production volume it is inferior to foreign countries. Since the products of the Russian agro-industrial complex fully meet the requirements of consumers for the naturalness of the raw material composition of the product, the development of domestic production of functional beverages for sports nutrition is promising to ensure the stability of the domestic market.

CRITICAL REVIEW OF EMULSION STABILITY AND CHARACTERIZATION TECHNIQUES IN OIL PROCESSING

2021 ◽  
pp. 1-36
Author(s):  
Vahideh Angardi ◽  
Ali Ettehadi ◽  
Özgün Yücel
Keyword(s):  
Separation Efficiency ◽  
Petroleum Industry ◽  
Cost Effective ◽  
Downstream Processing ◽  
Physical Factors ◽  
Comprehensive Review ◽  
Factors Affecting ◽  
Mathematical Explanations ◽  
The Stability ◽  
The Right

Abstract Effective separation of water and oil dispersions is considered a critical step in the determination of technical and economic success in the petroleum industry over the years. Moreover, a deeper understanding of the emulsification process and different affected parameters is essential for cost-effective oil production, transportation, and downstream processing. Numerous studies conducted on the concept of dispersion characterization indicate the importance of this concept, which deserves attention by the scientific community. Therefore, a comprehensive review study with critical analysis on significant concepts will help readers follow them easily. This study is a comprehensive review of the concept of dispersion characterization and conducted studies recently published. The main purposes of this review are to 1) Highlight flaws, 2) Outline gaps and weaknesses, 3) Address conflicts, 4) Prevent duplication of effort, 5) List factors affecting dispersion. It was found that the separation efficiency and stability of dispersions are affected by different chemical and physical factors. Factors affecting the stability of the emulsions have been studied in detail and will help to look for the right action to ensure stable emulsions. In addition, methods of ensuring stability, especially coalescence are highlighted, and coalescence mathematical explanations of phenomena are presented.

Cost–Effective Retrofit Of A Palm Oil Refinery Using Pinch Analysis

2012 ◽  
Author(s):  
Sharifah Rafidah Wan Alwi ◽  
Muhammad Azan Tamar Jaya ◽  
Zainuddin Abdul Manan
Keyword(s):  
Heat Exchanger ◽  
Palm Oil ◽  
Thermal Efficiency ◽  
Capital Investment ◽  
Heat Recovery ◽  
Cost Effective ◽  
Oil Refinery ◽  
Pinch Analysis ◽  
Heat Exchanger Network ◽  
Maximum Heat

Kilang penapisan minyak sawit lazimnya melibatkan proses penggunaan tenaga yang tinggi. Peningkatan kecekapan tenaga adalah amat penting bagi memastikan keuntungan tercapai. Kertas kerja ini menggunakan teknik analisis jepit bagi memaksimumkan penggunaan semula haba dan meningkatkan kecekapan sistem rangkaian haba sedia ada di kilang penghasilan minyak sawit, tertakluk kepada kekangan–kekangan proses. Langkah–langkah yang terlibat ialah penetapan sasaran guna semula haba maksimum diikuti dengan reka bentuk rangkaian haba yang ekonomik. Aplikasi teknik berkenaan kepada kilang penghasilan minyak sawit telah menghasilkan pengurangan penggunaan haba panas dan sejuk sebanyak 700 kW (21%), atau penjimatan kos utiliti sebanyak RM370,787, dengan pelaburan kapital sebanyak RM656,293 dan jangka pulangan balik selama 1.77 tahun. Kata kunci: Analisis jepit; minyak kelapa sawit; sedia ada; rangkaian pemindahan haba; kitar semula haba maksimum A palm oil refinery involves energy–intensive processes. Maximizing thermal efficiency of palm oil refinery is crucial for the plant profitability. This work implements a pinch analysis retrofit technique to maximize heat recovery and thermal efficiency of a palm oil refinery, subject to the existing process constraints. The procedures involve setting the maximum heat recovery targets and cost–effective retrofit of the heat exchanger network (HEN). Application of the technique on a palm oil refinery results in reduction of 700 kW (21%) heating and cooling loads or a saving of RM370,787, incurring a capital investment of about RM656,293 and a payback period of 1.77 years. Key words: Pinch analysis; palm oil; retrofit; heat exchanger network; maximum heat recovery

Sign in / Sign up

Export Citation Format

Share Document