Toward Biomolecular Computers Using Reaction-Diffusion Dynamics

2011 ◽  
pp. 176-183
Author(s):  
Masahiko Hiratsuka ◽  
Koichi Ito ◽  
Takafumi Aoki ◽  
Tatsuo Higuchi
Keyword(s):  
Integrated Circuits ◽  
Molecular Electronics ◽  
Integrated Circuit ◽  
Functional Model ◽  
Reaction Diffusion ◽  
Building Blocks ◽  
Biological Molecules ◽  
Computing Paradigm ◽  
Diffusion Dynamics ◽  
Massively Parallel Computing

This article investigates a possibility of constructing massively parallel computing systems using molecular electronics technology. By employing the specificity of biological molecules, such as enzymes, new integrated circuit architectures that are free from interconnection problems could be constructed. To clarify the proposed concept, we present a functional model of an artificial catalyst device called an enzyme transistor. In this article, we develop artificial catalyst devices as basic building blocks for molecular computing integrated circuits, and explore the possibility of a new computing paradigm using reaction-diffusion dynamics induced by collective behavior of artificial catalyst devices.

scholarly journals Interband Cascade Photonic Integrated Circuits on Native III-V Chip

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 599
Author(s):  
Jerry R. Meyer ◽  
Chul Soo Kim ◽  
Mijin Kim ◽  
Chadwick L. Canedy ◽  
Charles D. Merritt ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Detection System ◽  
Laser Cavity ◽  
Building Blocks ◽  
Drive Power ◽  
Optical Elements ◽  
Photonic Integrated Circuit ◽  
Cleaved Facets ◽  
On Chip

We describe how a midwave infrared photonic integrated circuit (PIC) that combines lasers, detectors, passive waveguides, and other optical elements may be constructed on the native GaSb substrate of an interband cascade laser (ICL) structure. The active and passive building blocks may be used, for example, to fabricate an on-chip chemical detection system with a passive sensing waveguide that evanescently couples to an ambient sample gas. A variety of highly compact architectures are described, some of which incorporate both the sensing waveguide and detector into a laser cavity defined by two high-reflectivity cleaved facets. We also describe an edge-emitting laser configuration that optimizes stability by minimizing parasitic feedback from external optical elements, and which can potentially operate with lower drive power than any mid-IR laser now available. While ICL-based PICs processed on GaSb serve to illustrate the various configurations, many of the proposed concepts apply equally to quantum-cascade-laser (QCL)-based PICs processed on InP, and PICs that integrate III-V lasers and detectors on silicon. With mature processing, it should become possible to mass-produce hundreds of individual PICs on the same chip which, when singulated, will realize chemical sensing by an extremely compact and inexpensive package.

scholarly journals Characterization of new materials for capacitor formation in integrated circuit technology

2010 ◽  
pp. 26-31
Author(s):  
Wenbin Chen
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Building Blocks ◽  
Electronic Systems ◽  
New Materials ◽  
Computer Logic ◽  
Widespread Availability ◽  
Scaling Down ◽  
Circuit Technology

There have been tremendous developments in electronic technology in the last 40 years as evidenced by the widespread availability of computers, mobile phones and electronic entertainment systems and their continued shrinking in size and cost. Much of the improvement in the performance of electronic systems can be traced to developments in Integrated Circuits (ICs) (“microchips”) which form the fundamental building blocks of modern electronics technology. Within an IC, the most important electronic component is the transistor and it is the transistor that is used to implement the operations associated with computer logic. With each generation of technology, the size of the transistors is reduced and more of them can fit on a single IC, which allows more powerful devices to be made that take up the same or even smaller space and draw less power from the battery. This trend regarding the scaling down in size of the transistors was ...

Scanning Electron Microscopy in Hybrid Microelectronics

1976 ◽  
Vol 34 ◽  
pp. 456-457
Author(s):  
S. Khadpe ◽  
R. Faryniak
Keyword(s):  
Integrated Circuits ◽  
Thick Film ◽  
Integrated Circuit ◽  
Failure Modes ◽  
Three Dimensional ◽  
Circuit Components ◽  
Hybrid Microcircuit ◽  
Electrical Connections ◽  
Scanning Electron

The Scanning Electron Microscope (SEM) is an important tool in Thick Film Hybrid Microcircuits Manufacturing because of its large depth of focus and three dimensional capability. This paper discusses some of the important areas in which the SEM is used to monitor process control and component failure modes during the various stages of manufacture of a typical hybrid microcircuit.Figure 1 shows a thick film hybrid microcircuit used in a Motorola Paging Receiver. The circuit consists of thick film resistors and conductors screened and fired on a ceramic (aluminum oxide) substrate. Two integrated circuit dice are bonded to the conductors by means of conductive epoxy and electrical connections from each integrated circuit to the substrate are made by ultrasonically bonding 1 mil aluminum wires from the die pads to appropriate conductor pads on the substrate. In addition to the integrated circuits and the resistors, the circuit includes seven chip capacitors soldered onto the substrate. Some of the important considerations involved in the selection and reliability aspects of the hybrid circuit components are: (a) the quality of the substrate; (b) the surface structure of the thick film conductors; (c) the metallization characteristics of the integrated circuit; and (d) the quality of the wire bond interconnections.

TEM study of phosphorus-implanted pseudomorphic Si0.88Ge0.12 on Si(100)

1995 ◽  
Vol 53 ◽  
pp. 468-469
Author(s):  
N. David Theodore ◽  
Donald Y.C Lie ◽  
J. H. Song ◽  
Peter Crozier
Keyword(s):  
Integrated Circuits ◽  
Heterojunction Bipolar Transistors ◽  
Integrated Circuit ◽  
High Speed ◽  
Room Temperature ◽  
Strain Relaxation ◽  
Bipolar Transistors ◽  
Sige Hbt ◽  
Integrated Circuit Manufacturing ◽  
Microstructural Behavior

SiGe is being extensively investigated for use in heterojunction bipolar-transistors (HBT) and high-speed integrated circuits. The material offers adjustable bandgaps, improved carrier mobilities over Si homostructures, and compatibility with Si-based integrated-circuit manufacturing. SiGe HBT performance can be improved by increasing the base-doping or by widening the base link-region by ion implantation. A problem that arises however is that implantation can enhance strain-relaxation of SiGe/Si.Furthermore, once misfit or threading dislocations result, the defects can give rise to recombination-generation in depletion regions of semiconductor devices. It is of relevance therefore to study the damage and anneal behavior of implanted SiGe layers. The present study investigates the microstructural behavior of phosphorus implanted pseudomorphic metastable Si0.88Ge0.12 films on silicon, exposed to various anneals.Metastable pseudomorphic Si0.88Ge0.12 films were grown ~265 nm thick on a silicon wafer by molecular-beam epitaxy. Pieces of this wafer were then implanted at room temperature with 100 keV phosphorus ions to a dose of 1.5×1015 cm-2.

Micromechanics Measurements Applied to Integrated Circuit Microelectronics

1997 ◽  
Vol 473 ◽  
Author(s):  
David R. Clarke
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Fracture Resistance ◽  
Interface Fracture ◽  
New Techniques ◽  
Fracture Properties ◽  
Engineered Structures ◽  
Mechanical And Fracture Properties ◽  
Interconnect Lines ◽  
Metallic Interconnect

ABSTRACTAs in other engineered structures, fracture occasionally occurs in integrated microelectronic circuits. Fracture can take a number of forms including voiding of metallic interconnect lines, decohesion of interfaces, and stress-induced microcracking of thin films. The characteristic feature that distinguishes such fracture phenomena from similar behaviors in other engineered structures is the length scales involved, typically micron and sub-micron. This length scale necessitates new techniques for measuring mechanical and fracture properties. In this work, we describe non-contact optical techniques for probing strains and a microscopic “decohesion” test for measuring interface fracture resistance in integrated circuits.

Nanofabricated SiO2-Si-SiO2 Resonant Tunneling Diodes

2000 ◽  
Vol 631 ◽  
Author(s):  
J. G. Fleming ◽  
E. Chow ◽  
S.-Y. Lin
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Resonant Tunneling ◽  
Resonant Tunneling Diodes ◽  
Resonance Tunneling ◽  
Tunneling Diodes

ABSTRACTResonance Tunneling Diodes (RTDs) are devices that can demonstrate very highspeed operation. Typically they have been fabricated using epitaxial techniques and materials not consistent with standard commercial integrated circuits. We report here the first demonstration of SiO2-Si-SiO2 RTDs. These new structures were fabricated using novel combinations of silicon integrated circuit processes.

The Radio Probe™: A New Measurement Tool for High Speed Integrated Circuits

2005 ◽  
Author(s):  
Mark Kimball
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
High Speed ◽  
Attenuation Factor ◽  
Cost Effective ◽  
Frequency Measurement ◽  
Single Frequency ◽  
Measurement Tool ◽  
Probe Design ◽  
Differential Measurement

Abstract This article presents a novel tool designed to allow circuit node measurements in a radio frequency (RF) integrated circuit. The discussion covers RF circuit problems; provides details on the Radio Probe design, which achieves an input impedance of 50Kohms and an overall attenuation factor of 0 dB; and describes signal to noise issues in the output signal, along with their improvement techniques. This cost-effective solution incorporates features that make it well suited to the task of differential measurement of circuit nodes within an RF IC. The Radio Probe concept offers a number of advantages compared to active probes. It is a single frequency measurement tool, so it complements, rather than replaces, active probes.

A Technique for Reliably Preparing Full-Length Metallographic Cross-Sections of Integrated Circuit Bond Wires

2006 ◽  
Author(s):  
Carl Nail
Keyword(s):  
Integrated Circuits ◽  
High Precision ◽  
Cross Sections ◽  
Integrated Circuit ◽  
Radiographic Analysis ◽  
Good Resolution ◽  
Metallographic Preparation ◽  
Bond Wires ◽  
Darkfield Imaging ◽  
Bond Wire

Abstract To overcome the obstacles in preparing high-precision cross-sections of 'blind' bond wires in integrated circuits, this article proposes a different technique that generates reliable, repeatable cross-sections of bond wires across most or all of their lengths, allowing unencumbered and relatively artifact-free analysis of a given bond wire. The basic method for cross-sectioning a 'blind' bond wire involves radiographic analysis of the sample and metallographic preparation of the sample to the plane of interest. This is followed by tracking the exact location of the plane on the original radiograph using a stereomicroscope and finally darkfield imaging in which the wire is clearly visible with good resolution.

Emerging Techniques for the Characterization of Nano-Mechanical Properties of Integrated Circuit Components

2008 ◽  
Author(s):  
Nicholas Randall ◽  
Rahul Premachandran Nair
Keyword(s):  
Mechanical Properties ◽  
Quality Control ◽  
Integrated Circuits ◽  
Integrated Circuit ◽  
Manufacturing Process ◽  
Solder Bumps ◽  
Initial Work ◽  
Circuit Components ◽  
Materials Used

Abstract With the growing complexity of integrated circuits (IC) comes the issue of quality control during the manufacturing process. In order to avoid late realization of design flaws which could be very expensive, the characterization of the mechanical properties of the IC components needs to be carried out in a more efficient and standardized manner. The effects of changes in the manufacturing process and materials used on the functioning and reliability of the final device also need to be addressed. Initial work on accurately determining several key mechanical properties of bonding pads, solder bumps and coatings using a combination of different methods and equipment has been summarized.

Enhancements of Non-contact Measurements of Electrical Waveforms on the Proximity of a Signal Surface Using Groups of Pulses

2002 ◽  
Author(s):  
Fenglei Du ◽  
Greg Bridges ◽  
D.J. Thomson ◽  
Rama R. Goruganthu ◽  
Shawn McBride ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Signal To Noise Ratio ◽  
Electrostatic Force ◽  
Single Pulse ◽  
Electric Signal ◽  
Measurement Instruments ◽  
Cycle Times ◽  
Force Microscopy ◽  
And Performance

Abstract With the ever-increasing density and performance of integrated circuits, non-invasive, accurate, and high spatial and temporal resolution electric signal measurement instruments hold the key to performing successful diagnostics and failure analysis. Sampled electrostatic force microscopy (EFM) has the potential for such applications. It provides a noninvasive approach to measuring high frequency internal integrated circuit signals. Previous EFMs operate using a repetitive single-pulse sampling approach and are inherently subject to the signal-to-noise ratio (SNR) problems when test pattern duty cycle times become large. In this paper we present an innovative technique that uses groups of pulses to improve the SNR of sampled EFM systems. The approach can easily provide more than an order-ofmagnitude improvement to the SNR. The details of the approach are presented.

Sign in / Sign up

Export Citation Format

Share Document