The Development of Composite Building Product and its Fire Technical Characteristics

2014 ◽  
Vol 1001 ◽  
pp. 368-372
Author(s):  
Miroslava Netopilová ◽  
Jan Mikulenka ◽  
Anna Benešová
Keyword(s):  
Composite Material ◽  
Composite Materials ◽  
Industrial Waste ◽  
Raw Materials ◽  
Raw Material ◽  
Waste Materials ◽  
Building Industry ◽  
Building Product ◽  
Material Resources ◽  
Renewable Raw Material

The article focuses on the research and development of a new composite material applicable in building industry, renewable raw material resources and industrial waste materials. The aim of the research is not only the application of concrete secondary raw materials but also the gaining of required safety aspects of these composite materials, i.e. certain fire technical characteristics.

scholarly journals Development of Innovative Polyol Systems From Recycled Polyethylene Terephthalate and Renewable Raw Materials for Rigid Polyurethane Foams

2020 ◽  
Author(s):  
◽  
Aiga Ivdre
Keyword(s):  
Raw Materials ◽  
Polyurethane Foams ◽  
Raw Material ◽  
Insulation Material ◽  
Recycled Pet ◽  
Renewable Raw Materials ◽  
Material Resources ◽  
Pu Foam ◽  
Renewable Raw Material ◽  
Pu Foams

The Thesis aims to develop innovative polyols suitable for the production of rigid PU foam from recycled PET flakes and renewable raw material resources (rapeseed oil and tall oil) and to evaluate the effect of polyols on the most important properties of rigid PU foams as a thermal insulation material.

scholarly journals Implementation of Contact-Condensation Hardening Theory Mechanisms when Forming Building Composites

2020 ◽  
Vol 24 (1) ◽  
pp. 90-102
Author(s):  
M. P. Stepanova ◽  
O. A. Sotnikova
Keyword(s):  
Composite Material ◽  
Composite Materials ◽  
Structure Formation ◽  
Building Materials ◽  
Raw Materials ◽  
Raw Material ◽  
Material Base ◽  
Resource Saving ◽  
The Impact ◽  
Contact Condensation

Purpose of research is to study cheaper composite materials for building structures such as cement-free ones without heat treatment, which will undoubtedly allow finding their application in building industry. To achieve this goal it is necessary to identify patterns of structure formation of clinker-free contact condensation hardening composite materials in which portlandite crystals act as a matrix, and the physicochemical active component of natural origin acts as a filler.Methods. In accordance with the purpose set, one of the main tasks of the work was to be solved; it involved study-ing the patterns of structure formation of contact-condensation hardening systems relying on the basic principles of materials science, which include studying the influence of the composition, structure and state of the starting com-ponents on the properties of a composite material. In this work, we studied the role of the physicochemical activity of raw materials and the possibility of ‘combining’ a portlandite matrix with filling mechano-physicochemical active raw materials capable of producing new structures. To form the composite material, a compaction pressing technique at elevated specific pressures was used, which made it possible to implement the mechanisms of contact condensation technology of structure formation. The formation of physicochemical bonds of portlandite and aluminosilicate filler of various types is also possible with certain ratios of their mass fractions and V/I ratios the optimization of which was one of our objectives.Results. The result of this work is to assess the impact of raw material characteristics and technology parameters on the properties of the resulting material, namely, the improvement of the compacting pressure and the amount of filler when getting a compacted composite.Conclusion. The development of a technology of producing clinker-free contact condensation composites based on portlandite with aluminosilicate filler will expand the raw material base of local building materials, reduce their cost and energy consumption, that is, solve key issues of resource saving in the building materials production.

Influence of Mix Fly and Bottom Ashes from Biomass on Selected Properties of Cement Mortars

2019 ◽  
Vol 828 ◽  
pp. 14-17
Author(s):  
Malgorzata Ulewicz ◽  
Jakub Jura
Keyword(s):  
Electron Microscopy ◽  
Compressive Strength ◽  
Industrial Waste ◽  
Cement Mortar ◽  
Raw Materials ◽  
Bottom Ash ◽  
Waste Materials ◽  
X Ray ◽  
Cement Mortars ◽  
Fluorescence Spectrometer

The preliminary results of utilization of fly and bottom ash from combustion of biomass for the produce of cement mortars has been presented. Currently, this waste are deposited in industrial waste landfills. The chemical composition of waste materials was determined using X-ray fluorescence (spectrometer ARL Advant 'XP). ). In the studies sand was replaced by mix of fly and bottom ash from the combustion of biomass in an amount of 10-30% by weight of cement CEM I 42.5 R (Cemex). The obtained cement mortar concrete were subjected to microscopic examination (LEO Electron Microscopy Ltd.) and their compressive strength (PN-EN-196-1), frost resistance (PN-EN 1015-11 and PN-B -04500 ) and absorbability (PN-85/B-04500) were identified. The obtained results showed, the replacement of the cement by mix ashes from combustion of biomass reduce consumption of raw materials and will have a good influence on the environment.

scholarly journals Tension mechanical properties of recycled glass-epoxy composite material

2012 ◽  
pp. 189-198 ◽  
Author(s):  
Jelena Petrovic ◽  
Darko Ljubic ◽  
Marina Stamenovic ◽  
Ivana Dimic ◽  
Slavisa Putic
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Composite Material ◽  
Composite Materials ◽  
Modulus Of Elasticity ◽  
Epoxy Composite ◽  
Raw Materials ◽  
Mechanical Tests ◽  
Recycled Glass ◽  
Before And After

The significance of composite materials and their applications are mainly due to their good properties. This imposes the need for their recycling, thus extending their lifetime. Once used composite material will be disposed as a waste at the end of it service life. After recycling, this kind of waste can be used as raw materials for the production of same material, which raises their applicability. This indicates a great importance of recycling as a method of the renowal of composite materials. This study represents a contribution to the field of mechanical properties of the recycled composite materials. The tension mechanical properties (tensile strength and modulus of elasticity) of once used and disposed glass-epoxy composite material were compared before and after the recycling. The obtained results from mechanical tests confirmed that the applied recycling method was suitable for glass-epoxy composite materials. In respect to the tensile strength and modulus of elasticity it can be further assessed the possibility of use of recycled glass-epoxy composite materials.

scholarly journals Synthesis of Acid Polyols As a Feedstock to Produce Flexible Polyurethanes and Their Effect on the Income Level of Furniture Craftsmen

2019 ◽  
Vol 2 (1) ◽  
pp. 39
Author(s):  
Andi Budirohmi
Keyword(s):  
Fourier Transform ◽  
Fatty Acid ◽  
Raw Materials ◽  
Raw Material ◽  
Polymerization Process ◽  
Hydroxyl Group ◽  
Infra Red ◽  
Renewable Raw Material ◽  
Shoe Soles ◽  
Alternative Feedstock

Polyuretanes are widely used as elastomers, coatings, adhesivesand binders,interior and exterior cars, furniture,shoe soles, carpets, rigit and flexible foams, membrane materials as well as constuction materials .The production of polyurethanes is largely derived  from  polyols derived from petroleum . Howover, petroleum  is a non- renewable raw material . Thus it is necessary to look alternative feedstock  for the manufacture of polyol  as a polyurethane raw material. Synnthesis polyurethane by polymerization process  using  polyol volume based on polyol  oleat acid  polypropylenglycol ( PPG ) in order to know  whether fatty acid can be used  as raw materials  of polyurethane manufacture.From the result of the study. Based on Fourier Transform Infra  Red ( FTIR), showed,that the product  produced is polyol with obtained hydroxyl  group ( OH group )with hydroxylnumber is 129,81 mg KOH / g and 157,60 mg KOH / g sample of 70 

scholarly journals Extraction of Value-Added Minerals from Various Agricultural, Industrial and Domestic Wastes

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6333
Author(s):  
Virendra Kumar Yadav ◽  
Krishna Kumar Yadav ◽  
Vineet Tirth ◽  
Govindhan Gnanamoorthy ◽  
Nitin Gupta ◽  
...  
Keyword(s):  
Environmental Pollution ◽  
Industrial Waste ◽  
Raw Materials ◽  
Agricultural Waste ◽  
Value Added ◽  
Cost Effective ◽  
Household Waste ◽  
Waste Materials ◽  
Materials Synthesis ◽  
Coconut Shells

Environmental pollution is one of the major concerns throughout the world. The rise of industrialization has increased the generation of waste materials, causing environmental degradation and threat to the health of living beings. To overcome this problem and effectively handle waste materials, proper management skills are required. Waste as a whole is not only waste, but it also holds various valuable materials that can be used again. Such useful materials or elements need to be segregated and recovered using sustainable recovery methods. Agricultural waste, industrial waste, and household waste have the potential to generate different value-added products. More specifically, the industrial waste like fly ash, gypsum waste, and red mud can be used for the recovery of alumina, silica, and zeolites. While agricultural waste like rice husks, sugarcane bagasse, and coconut shells can be used for recovery of silica, calcium, and carbon materials. In addition, domestic waste like incense stick ash and eggshell waste that is rich in calcium can be used for the recovery of calcium-related products. In agricultural, industrial, and domestic sectors, several raw materials are used; therefore, it is of high economic interest to recover valuable minerals and to process them and convert them into merchandisable products. This will not only decrease environmental pollution, it will also provide an environmentally friendly and cost-effective approach for materials synthesis. These value-added materials can be used for medicine, cosmetics, electronics, catalysis, and environmental cleanup.

Influence of Binder and Filler Modification of Composite Materials for Extreme Conditions on Development in Time Parameters

2015 ◽  
Vol 1124 ◽  
pp. 164-169
Author(s):  
Tomáš Melichar ◽  
Jiří Bydžovský ◽  
Ámos Dufka
Keyword(s):  
Composite Material ◽  
Composite Materials ◽  
Raw Materials ◽  
Time Development ◽  
Extreme Conditions ◽  
Lightweight Aggregates ◽  
Time Parameters

The article presents results of the research focused on study of time development of composite material resistance to extreme exposition conditions. The tested materials were modified either in matrix respect (mixing binder) and aggregate item as well by alternative raw materials (lightweight aggregates). The emphasis was placed on evaluation of resistance at exposition in 28, 45 and 90-day extreme conditions ambient when the specimens were stored under standard conditions. Mortars were exposed in ambient with temperature up to 1000 °C and subsequently cooled under control in furnaces.

scholarly journals Mapping of raw materials and habitats in the Danish sector of the North Sea

1969 ◽  
Vol 23 ◽  
pp. 33-36
Author(s):  
Jørn Bo Jensen ◽  
Sara Borre ◽  
Jørgen O. Leth ◽  
Zyad Al-Hamdani ◽  
Laura G. Addington
Keyword(s):  
North Sea ◽  
Raw Materials ◽  
Distribution Volume ◽  
Raw Material ◽  
Marine Strategy Framework Directive ◽  
Material Resources ◽  
The North ◽  
General Mapping ◽  
The North Sea ◽  
Substrate Types

In the summer of 2010, the Geological Survey of Denmark and Greenland (GEUS) mapped the potential raw materials and substrate types, over large parts of the Danish economic sector of the North Sea, in cooperation with Orbicon A/S. The mapping was carried out for the Danish Nature Agency; it is part of the general mapping of raw material resources within the territories of the Danish state and forms part of the input for the implementation of the European Union’s Marine Strategy Framework Directive. The purpose was (1) to provide an overview of the distribution, volume and composition of available raw materials and (2) to identify, describe and map the distribution of the dominant marine bottom types.

scholarly journals Circular investments as a key to solving the growth dilemma

2021 ◽  
Vol 188 (3-4) ◽  
pp. 58-68
Author(s):  
Ludmila Kormishkina ◽  
◽  
Evgenii Kormishkin ◽  
Vladimir Gorin ◽  
Dmitrii Koloskov ◽  
...  
Keyword(s):  
Raw Materials ◽  
Multiple Linear Regression Model ◽  
Raw Material ◽  
Household Waste ◽  
Negative Effects ◽  
Methodological Foundation ◽  
Material Resources ◽  
Real Gdp ◽  
Scientific Hypothesis

The rationale for this study is based on the extreme importance of finding a solution to a complex growth dilemma arising from the negative effects of human activity and the limited ability of the ecosystem to regenerate and provide resources required by mankind to ensure sustainable development and the long-term prosperity. The research is aimed at proving a scientific hypothesis that states: when the global raw-materials crisis becomes increasingly noticeable in various countries of the world, including Russia, circular investments may become a driver for long-term economic growth and the launch of far-reaching reforms of the economy in the 21st century. Circular investments in this paper are viewed as a special type of real eco-investment that combines advancements in technology and innovations to ensure renewal and industrial-scale reproduction of resources (raw materials and energy) from industrial and household waste, along with the mitigation and/or elimination of negative effects, on the environment. A multiple linear regression model has been developed to confirm a statistically-relevant connection between circular investments and real GDP. As a methodological foundation for the model, we used the classic Cobb-Douglas production function modified to take into account industrially reproduced raw material resources included in the production process. Further, we have defined major limits for circular investments in Russia today and highlighted the primary measures which are to be taken to launch circular investments in order to find a solution to the complex growth dilemma.

scholarly journals SME INTER-CLUSTERING LINKAGE OF EAST JAVA: AMONG BUSINESS STRATEGY AND COOPERATIVES

2021 ◽  
Vol 6 (2) ◽  
pp. 174
Author(s):  
Deni Aditya Susanto
Keyword(s):  
Business Strategy ◽  
Business Performance ◽  
Raw Materials ◽  
Descriptive Analysis ◽  
Raw Material ◽  
Matrix Analysis ◽  
Material Resources ◽  
Business Units ◽  
Swot Matrix ◽  
Strategy Variables

The Indonesian SME cluster has not fully implemented the cluster concept, causing the SME cluster to stagnate. The Meubel SME Cluster of Pasuruan City and Malang City are two prime clusters working to show their economic crisis performance several times. This study aims to examine the factors of inter-firm linkage and business strategy on business performance. Methodologically, this study uses several analytical methods, namely multiple linear regression, to measure the influence between inter-firm linkage and business strategy variables on business performance, SWOT matrix to map strategy, and descriptive analysis to present non-parametric findings. This study analyzed 60 samples of MSEs from a population of 350 business units. The results of the study mentioned that aspects of business strategy (finance, marketing, human resources, research, development, and operations) had a more significant effect on business performance (sales, profits, assets, labor, and productivity) than inter-firm linkage (backward, forward, and horizontal). Through SWOT matrix analysis, the inter-clustering linkage of Malang City and Pasuruan cluster SMEs is naturally created. Access to raw materials and labor in the city of Malang began to be complicated even though consumers’ potential from large tourists and access to adequate technology. In contrast, Pasuruan City is lt to do marketing because of geographical conditions’ weakness even though the raw material resources and labor are abundant. The specialization of production is created with Pasuruan City as the production base and Malang City as the Marketing Base.Keywords: Cooperatives, Business Strategy, Inter-Clustering LinkageJEL: Q13, L21, C38

Sign in / Sign up

Export Citation Format

Share Document