Measurement and Research of the Transverse Mechanical Properties of High Performance Fibers

2011 ◽  
Vol 492 ◽  
pp. 384-387
Author(s):  
Ji Zhi Huang ◽  
Qun Hua Li ◽  
Qi Yang ◽  
Hui Jun Li ◽  
Wei Ye
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Glass Fibers ◽  
Compression Modulus ◽  
Mechanical Analysis ◽  
Transverse Compression ◽  
Kevlar Fiber ◽  
Analysis Instrument ◽  
Carbon Ceramic ◽  
Auxiliary Device

Transverse compression stress-strain curves of a single fiber having a diameter about 10 μm must be measured to obtain transverse compression mechanical properties of high performance fibers. RJY-1 thermo-mechanical analysis instrument that the smallest division value is 0.1 μm can measure the curves of the fibers by installing some auxiliary device on the instrument. The conclu- sion obtained from the features of the curve is that the Kevlar fiber showed a yielding in transverse compression, while Carbon, Ceramic and Glass fibers did not appear the yielding, and their com- pression curves were almost straight up to the point of brittleness. Transverse compression modulus, yield and breaking stress of Kevlar, Carbon and Glass fiber can be obtained from the curves.

scholarly journals The Mechanical Properties and Damage Evolution of UHPC Reinforced with Glass Fibers and High-Performance Polypropylene Fibers

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2455
Author(s):  
Jiayuan He ◽  
Weizhen Chen ◽  
Boshan Zhang ◽  
Jiangjiang Yu ◽  
Hang Liu
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Damage Evolution ◽  
High Performance ◽  
High Performance Concrete ◽  
Glass Fibers ◽  
Ultra High Performance Concrete ◽  
Concrete Damaged Plasticity ◽  
The Difference ◽  
Experimental Values

Due to the sharp and corrosion-prone features of steel fibers, there is a demand for ultra-high-performance concrete (UHPC) reinforced with nonmetallic fibers. In this paper, glass fiber (GF) and the high-performance polypropylene (HPP) fiber were selected to prepare UHPC, and the effects of different fibers on the compressive, tensile and bending properties of UHPC were investigated, experimentally and numerically. Then, the damage evolution of UHPC was further studied numerically, adopting the concrete damaged plasticity (CDP) model. The difference between the simulation values and experimental values was within 5.0%, verifying the reliability of the numerical model. The results indicate that 2.0% fiber content in UHPC provides better mechanical properties. In addition, the glass fiber was more significant in strengthening the effect. Compared with HPP-UHPC, the compressive, tensile and flexural strength of GF-UHPC increased by about 20%, 30% and 40%, respectively. However, the flexural toughness indexes I5, I10 and I20 of HPP-UHPC were about 1.2, 2.0 and 3.8 times those of GF-UHPC, respectively, showing that the toughening effect of the HPP fiber is better.

scholarly journals Excellent Mechanical Properties of the Silicate Glasses Modified by CeO2 and TiO2: A New Choice for High-Strength and High-Modulus Glass Fibers

2021 ◽  
Author(s):  
Chao Chen ◽  
Qingong Zhu ◽  
Huanping Wang ◽  
Feifei Huang ◽  
Qinghua Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Silicate Glass ◽  
Optical Fibers ◽  
Bending Strength ◽  
Glass Fibers ◽  
High Strength ◽  
Maximum Level ◽  
Compression Modulus ◽  
Co Doping ◽  
Optimum Approach

Abstract As is well known, silicate glass has a stable glass-forming region and mature drawing processes into fibers. In this study, to obtain enhanced mechanical properties, glasses with a composition of SiO2-Al2O3-MgO-CaO-B2O3-Fe2O3 were synthesized using TiO2 and CeO2. When the amount of TiO2 and CeO2 is less than 2 wt%, the mechanical properties increase with increases in the TiO2 and CeO2. However, as the amount of TiO2 and CeO2 increases from 2 to 3.5 wt%, the mechanical properties decrease. Co-doping with 1 wt% TiO2 and 1 wt% CeO2 was found to be the optimum approach, with a density, bending strength, compression strength, and compression modulus of 2.626 g/cm3, 108.36 MPa, 240.18 MPa, and 115.03 GPa, respectively. The optical band gap and Raman spectroscopy proved that, as long as the content of oxygen bonds reaches the maximum level, a kind of best structural stability and mechanical properties will be achieved. Hence, this type of high-strength silicate glass can be used in optical fibers for military defense, wind power generation, and transportation.

Mechanical Analysis of Unidirectional Fiber-Reinforced Polymers under Transverse Compression and Tension

2010 ◽  
Vol 139-141 ◽  
pp. 84-89 ◽  
Author(s):  
Hong Chang Qu ◽  
Xiao Zhou Xia ◽  
Hong Yuan Li ◽  
Zhi Qiang Xiong
Keyword(s):  
Polymer Matrix Composites ◽  
Glass Fibers ◽  
Constitutive Models ◽  
Mechanical Analysis ◽  
Interface Strength ◽  
Fiber Reinforced Polymers ◽  
Matrix Composites ◽  
Transverse Compression ◽  
Cohesive Elements ◽  
The Matrix

The mechanical behavior of polymer–matrix composites uniaxially reinforced with carbon or glass fibers subjected to compression/tension perpendicular to the fibers was studied using computational micromechanics. This is carried out using the finite element simulation of a representative volume element of the microstructure idealized as a random dispersion of parallel fibers embedded in the polymeric matrix. Two different interface strength values were chosen to explore the limiting cases of composites with strong or weak interfaces, and the actual failure mechanisms (plastic deformation of the matrix and interface decohesion) are included in the simulations through the corresponding constitutive models. Composites with either perfect or weak fiber/matrix interfaces (the latter introduced through cohesive elements) were studied to assess the influence of interface strength on the composite behavior. It was found that the composite properties under transverse compression/tension were mainly controlled by interface strength and the matrix yield strength in uniaxial compression/tension.

scholarly journals Na2Ti7O15 Nanowires with an Oriented Tunnel Structure and High Mechanical Stability: A Potential Anode of Sodium-Ion Batteries and Gas Sensing Materials

2019 ◽  
Vol 9 (8) ◽  
pp. 1673 ◽  
Author(s):  
Li-Ying Liu ◽  
Yang Ding ◽  
Bo Zhou ◽  
Ning-Ning Jia ◽  
Kuan Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Mechanical Stability ◽  
Gas Sensing ◽  
Mechanical Analysis ◽  
Sodium Ion ◽  
Sodium Ion Batteries ◽  
Tunnel Structure ◽  
Gas Sensitivity ◽  
Low Dimensional

Na2Ti7O15 (NTO) can be selected as candidate anode for high-performance sodium-ion batteries (SIBs). However, there are few reports of research on the mechanical properties of low-dimensional NTO, which is important for the stability of SIBs. In this work, by using the one-step hydrothermal method, NTO nanowires (NWs) with good orientation were prepared successfully. The transmission electron microscopy (TEM) and selected area electron diffraction (SAED)showed that the NTO NWs had a good aspect ratio and dispersion, with lengths over 20 μm. Further microstructure analysis showed that the nanowires grew along the (020) direction, and there were some "stripe" structures along the growing direction, which provides a good tunnel structure for Na ion channels. Further, the in situ mechanical analysis showed that the NTO NWs had excellent elastic deformation characteristics and mechanical structural stability. In addition, the NTO NWs also showed a good gas sensitivity to NO and NH3. Our results showed that the prepared NTO nanowires with a stripe tunnel oriented-structure and excellent mechanical properties may have a potential application in SIBs or other wearable sensor devices.

An Analysis on the Tensile Strength of Hybridized Reinforcement Filament Yarns by Commingling Process

2007 ◽  
Vol 539-543 ◽  
pp. 974-978
Author(s):  
Chathura Nalendra Herath ◽  
Beong Bok Hwang ◽  
B.S. Ham ◽  
Jung Min Seo ◽  
Bok Choon Kang
Keyword(s):  
Mechanical Properties ◽  
Glass Matrix ◽  
High Performance ◽  
Glass Fibers ◽  
Tensile Force ◽  
Matrix Material ◽  
General Purpose ◽  
Practical Applications ◽  
Advantages And Disadvantages ◽  
Glass Matrices

Carbon, aramid and glass fibers are inherently superior to conventional textile fibers in terms of mechanical properties as well as other chemical characteristics. Because of inherent advantages and disadvantages associated with each material, it is generally better to hybridize them to fully benefit of their high performance in many practical applications. In this paper, the possibility of hybridizing Carbon/Aramid-, Carbon/Glass- and Aramid/Glass- matrices has been investigated through the commingling process. In the experiment, several process parameters were selected and they include pressure, yarn oversupply-rate and different nozzle types. As a result of experiments, it was concluded that the hybridized materials has shown better performance than individual reinforced filament yarns in terms of mechanical properties. For small tensile forces, the Carbon/Glass/matrix combination turned out to be good enough for general purpose applications. However, for high tensile applications, Carbon/Aramid or Aramid/Glass with matrix combinations was better than the other material combinations. The hybridization process was also investigated under an air pressure of 5 bar, a yarn oversupply-rate of 1.5% for reinforced filaments, and 3.5% to 6% for matrix materials, respectively. It was also shown from the experimental results that Carbon/Glass/matrix combination may be desirable for small tensile force applications and Carbon/Aramid/matrix and Glass/Aramid/matrix combinations most suitable for heavy tensile force applications, respectively. As a matrix material, polypropylene and polyester have shown better performance than polyether-ether-keeton in terms of tensile property.

scholarly journals Effect of MWCNT on Thermal, Mechanical, and Morphological Properties of Polybutylene Terephthalate/Polycarbonate Blends

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
C. P. Rejisha ◽  
S. Soundararajan ◽  
N. Sivapatham ◽  
K. Palanivelu
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Flexural Modulus ◽  
Tensile Modulus ◽  
Nucleating Agent ◽  
Mechanical Analysis ◽  
Morphological Properties ◽  
Multiwall Carbon Nanotube ◽  
Polybutylene Terephthalate ◽  
The Impact

This paper evaluated the effect of multiwall carbon nanotube (MWCNT) on the properties of PBT/PC blends. The nanocomposites were obtained by melt blending MWCNT in the weight percentages 0.15, 0.3, and 0.45 wt% with PBT/PC blends in a high performance corotating twin screw extruder. Samples were characterized by tensile testing, dynamic mechanical analysis, thermal analysis, scanning electron microscopy, and X-ray diffraction. Concentrations of PBT and PC are optimized as 80 : 20 based on mechanical properties. A small amount of MWCNT shows better increase in the thermal and mechanical properties of the blends of PBT/PC nanocomposite when compared to nanoclays or inorganic fillers. The ultimate tensile strength of the nanocomposites increased from 54 MPa to 85 MPa with addition of MWCNT up to 0.3% and then decreased.The tensile modulus values were increased to about 60% and the flexural modulus was more than about 80%. The impact strength was also improved with 20% PC to about 60% and with 0.15% MWCNT to about 50%. The HDT also improved from 127°C to 205°C. It can be seen from XRD result that the crystallinity of PBT is less affected by incorporating MWCNT. The crystallizing temperature was increased and the MWCNT may act as a strong nucleating agent.

Improved quasi-static twin-fiber transverse compression of several high-performance fibers

2018 ◽  
Vol 89 (9) ◽  
pp. 1595-1613 ◽  
Author(s):  
Zherui Guo ◽  
Weinong Chen ◽  
James Zheng
Keyword(s):  
High Performance ◽  
Mechanical Response ◽  
Glass Fibers ◽  
Polymer Fibers ◽  
Transverse Compression ◽  
Electric Actuator ◽  
Compressive Response ◽  
Small Load ◽  
Compression Cycle ◽  
Elastic Transverse

The method of determining the quasi-static transverse compressive response of several high-performance polymer fibers was improved upon from a previous twin-fiber transverse compression setup in order to detect small initial high compliance signals while maintaining consistent diametral compression. Two fibers were laid parallel between two polished tool steel platens, and the fibers were subsequently compressed using a piezo-electric actuator at quasi-static rates. The new experimental setup ensures that the compression cycle begins when extremely small load signals are detected so that initial elastic transverse moduli may be more accurately measured. Nominal stress–strain curves were obtained for several types of high-performance fibers. The results show good agreement with previously obtained measurements. S-glass fibers exhibited a vastly different mechanical response compared to the polymer fibers.

Preliminary Mechanical Characterization of Reinforced Rigid Polyurethane Foams

2003 ◽  
Author(s):  
Nagesh Kasichainula ◽  
Sanjeev K. Khanna
Keyword(s):  
Mechanical Properties ◽  
Glass Fibers ◽  
Tensile Modulus ◽  
Compression Modulus ◽  
Layered Composite ◽  
Polyurethane Foams ◽  
Rigid Polyurethane Foams ◽  
Structural Applications ◽  
Glass Fiber Reinforcement ◽  
Static Mechanical

Rigid polyurethane foams are very widely used in a variety of structural and non-structural applications. For example, it may be used as an insulator, in sandwich layered composite panels, and as filler for improving the stiffness of lightweight components, such as thin metal tubes. Rigid foams do not show any recovery after impact and typically are crushed or crumble. They also tend to degrade over a period of time. Thus in this investigation, reinforced rigid polyurethane foams have been developed and characterized for their quasi-static mechanical properties. Rigid polyurethane foam was reinforced with short, 0.47 mm length, milled E-glass fibers. It has been observed that short glass fiber reinforcement helps in improving the mechanical properties, such as tensile modulus, breaking strength, and compression modulus, of the reinforced foam as compared to monolithic foam.

scholarly journals Phase Behavior and Thermo-Mechanical Properties of IF-WS2 Reinforced PP–PET Blend-Based Nanocomposites

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2342
Author(s):  
Ding Chen ◽  
Santosh K. Tiwari ◽  
Zhiyuan Ma ◽  
Jiahao Wen ◽  
Song Liu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Thermal Stability ◽  
High Performance ◽  
Large Scale ◽  
Chemical Vapor ◽  
Mechanical Analysis ◽  
Scale Production ◽  
Inorganic Fullerene ◽  
Materials Used

The industrial advancement of high-performance technologies directly depends on the thermo-mechanical properties of materials. Here we give an account of a facile approach for the bulk production of a polyethylene terephthalate (PET)/polypropylene (PP)-based nanocomposite blend with Inorganic Fullerene Tungsten Sulfide (IF-WS2) nanofiller using a single extruder. Nanofiller IF-WS2 was produced by the rotary chemical vapor deposition (RCVD) method. Subsequently, IF-WS2 nanoparticles were dispersed in PET and PP in different loadings to access impact and their dispersion behavior in polymer matrices. As-prepared blend nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), dynamic differential scanning (DSC), dynamic mechanical analysis (DMA), and X-ray diffraction (XRD). In this work, the tensile strength of the PP/PET matrix with 1% IF-WS2 increased by 31.8%, and the thermal stability of the sample PP/PET matrix with 2% increased by 18 °C. There was an extraordinary decrease in weight loss at elevated temperature for the nanocomposites in TGA analysis, which confirms the role of IF-WS2 on thermal stability versus plain nanocomposites. In addition, this method can also be used for the large-scale production of such materials used in high-temperature environments.

scholarly journals Mechanical Properties of a Unidirectional Basalt-Fiber/Epoxy Composite

2020 ◽  
Vol 4 (3) ◽  
pp. 101 ◽  
Author(s):  
David Plappert ◽  
Georg C. Ganzenmüller ◽  
Michael May ◽  
Samuel Beisel
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibers ◽  
High Performance ◽  
Glass Fibers ◽  
Basalt Fiber ◽  
Fiber Composites ◽  
Basalt Fibers ◽  
Strength And Stiffness ◽  
Better Than

High-performance composites based on basalt fibers are becoming increasingly available. However, in comparison to traditional composites containing glass or carbon fibers, their mechanical properties are currently less well known. In particular, this is the case for laminates consisting of unidirectional plies of continuous basalt fibers in an epoxy polymer matrix. Here, we report a full quasi-static characterization of the properties of such a material. To this end, we investigate tension, compression, and shear specimens, cut from quality autoclave-cured basalt composites. Our findings indicate that, in terms of strength and stiffness, unidirectional basalt fiber composites are comparable to, or better than epoxy composites made from E-glass fibers. At the same time, basalt fiber composites combine low manufacturing costs with good recycling properties and are therefore well suited to a number of engineering applications.

Sign in / Sign up

Export Citation Format

Share Document