Impact of Grinding Technology on Final Properties of Portland Cement

2016 ◽  
Vol 677 ◽  
pp. 191-196
Author(s):  
Karel Dvořák ◽  
Dusan Dolak ◽  
Iveta Hájková
Keyword(s):  
Portland Cement ◽  
Raw Materials ◽  
Chemical Activation ◽  
Technical Equipment ◽  
Production Methods ◽  
The Past ◽  
Main Emphasis ◽  
Save Energy ◽  
Burning Mode ◽  
Reducing Energy

Portland cement got his name derived from the appearance of concrete that resembles sandstone located near city of Portland in England. In 1824, John Aspdin was granted a patent for the production of Portland cement.In the past, energy and economic demands on production of cement were lower than they are today. Production was characterized by a slower burning mode and coarser grinding. Product produced this way were reaching lower compressive strength.Currently there are several companies producing Portland cement. Main ones in Czech Republic are Holcim, Heidelbergcement group and Lafarge Cement a.s. Their production methods are very similar. The differences are mostly in the possibility of using local raw materials with different chemical composition and the technical equipment of factories. In the production, the main emphasis is on reducing energy and financial cost.One way to save energy and money is to use mechanical-chemical activation when grinding Portland clinker.

Light-Weight Tire Concept

1996 ◽  
Vol 24 (2) ◽  
pp. 119-131
Author(s):  
F. Lux ◽  
H. Stumpf
Keyword(s):  
Fuel Consumption ◽  
Automobile Industry ◽  
Rolling Resistance ◽  
Performance Standards ◽  
Light Weight ◽  
Production Methods ◽  
Lower Fuel Consumption ◽  
Material Resources ◽  
The Past ◽  
Tire Production

Abstract Current demands by the consumer, the automobile industry, and the environment have determined the basis of this investigation. In the past, the requirements—ever faster, ever sportier—were accepted as decisive parameters for the development of our study. In the future, rational and safety-related tire characteristics as well as environmental consciousness will increase, whereas purely performance-related parameters will diminish in their importance. Through our light-weight tire project, we have paved the way for future tire generations. The first priority is the minimal use of material resources; this means a reduction of materials and energy in tire production by using advanced design and production methods without sacrificing performance standards. This benefits the consumer—the final judge of all of our activities—by considerably reducing the rolling resistance, leading to lower fuel consumption. Further design targets include the improvement of rolling behavior and increased comfort by reducing tire weight, and therefore a reduction in unsprung masses on the vehicle.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals Strength Development and Elemental Distribution of Dolomite/Fly Ash Geopolymer Composite under Elevated Temperature

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 1015 ◽  
Author(s):  
Emy Aizat Azimi ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Petrica Vizureanu ◽  
Mohd Arif Anuar Mohd Salleh ◽  
Andrei Victor Sandu ◽  
...  
Keyword(s):  
Elevated Temperature ◽  
Fly Ash ◽  
Portland Cement ◽  
Ordinary Portland Cement ◽  
Raw Materials ◽  
Liquid Sodium ◽  
Strength Development ◽  
Elemental Distribution ◽  
Distribution Analysis ◽  
Geopolymer Composites

A geopolymer has been reckoned as a rising technology with huge potential for application across the globe. Dolomite refers to a material that can be used raw in producing geopolymers. Nevertheless, dolomite has slow strength development due to its low reactivity as a geopolymer. In this study, dolomite/fly ash (DFA) geopolymer composites were produced with dolomite, fly ash, sodium hydroxide, and liquid sodium silicate. A compression test was carried out on DFA geopolymers to determine the strength of the composite, while a synchrotron Micro-Xray Fluorescence (Micro-XRF) test was performed to assess the elemental distribution in the geopolymer composite. The temperature applied in this study generated promising properties of DFA geopolymers, especially in strength, which displayed increments up to 74.48 MPa as the optimum value. Heat seemed to enhance the strength development of DFA geopolymer composites. The elemental distribution analysis revealed exceptional outcomes for the composites, particularly exposure up to 400 °C, which signified the homogeneity of the DFA composites. Temperatures exceeding 400 °C accelerated the strength development, thus increasing the strength of the DFA composites. This appears to be unique because the strength of ordinary Portland Cement (OPC) and other geopolymers composed of other raw materials is typically either maintained or decreases due to increased heat.

Comparative Study of Different Activation Treatments for the Preparation of Activated Carbon: A Mini-Review

2017 ◽  
Vol 100 (3) ◽  
pp. 299-312 ◽  
Author(s):  
Muhammad Imran Din ◽  
Sania Ashraf ◽  
Azeem Intisar
Keyword(s):  
Activated Carbon ◽  
Comparative Study ◽  
Raw Materials ◽  
Chemical Activation ◽  
Comparative Approach ◽  
Adsorption Mechanisms ◽  
Temperature Activation ◽  
Activation Conditions ◽  
Physical And Chemical ◽  
Characterisation Techniques

In this review, various methods of preparation of activated carbon from agricultural and commercial waste material are reviewed. In addition, we also discuss various activation treatments using a comparative approach. The data are organised in tabulated form for ease of comparative study. A review of numerous characterisation techniques is also provided. The effect of time and temperature, activation conditions, carbonisation conditions and impregnation ratios are explained and several physical and chemical activation treatments of raw materials and their impact on the micro- and mesoporous volumes and surface area are discussed. Lastly, a review of adsorption mechanisms of activated carbon (AC) is also provided.

Preparation of Alternative Hydraulic Binder Based on Secondary Raw Materials

2014 ◽  
Vol 1000 ◽  
pp. 12-15
Author(s):  
Jiří Švec ◽  
Tomáš Opravil ◽  
Jiří Másilko
Keyword(s):  
Portland Cement ◽  
Raw Materials ◽  
Construction Materials ◽  
High Volume ◽  
Point Of View ◽  
Hydraulic Lime ◽  
Combustion Gases ◽  
Secondary Raw Materials ◽  
Hydraulic Binder ◽  
Massive Scale

Reusing and recycling of secondary raw materials from high-volume industrial productions (especially form construction materials and binders fabrications) is very important way of conserving environment and it is also interesting from the economical point of view. The production of common hydraulic binders, especially Portland cement, burdens the environment with considerable amount of combustion gases and consumes energy in massive scale. Alternative (low – energy) binder can be used as Portland cement substitution in applications with lower mechanical properties requirements. Mined limestone wash sediments contain large amount of clay components, but there is also indispensable share of fine calcite. This composition makes these sediments a promising material for the preparation of hydraulic binders as Roman cement or hydraulic lime.

Statistics and Economic History

1941 ◽  
Vol 1 (1) ◽  
pp. 26-41 ◽  
Author(s):  
Simon Kuznets
Keyword(s):  
Statistical Analysis ◽  
Economic History ◽  
Raw Materials ◽  
The Other ◽  
Economic Study ◽  
Statistical Research ◽  
Historical Approach ◽  
The Past ◽  
Economic Inquiry ◽  
Analytical Tools

This paper deals with the relation between statistical analysis as applied in economic inquiry and history as written or interpreted by economic historians. Although both these branches of economic study derive from the same body of raw materials of inquiry—the recordable past and present of economic society—each has developed in comparative isolation from the other. Statistical economists have failed to utilize adequately the contributions that economic historians have made to our knowledge of the past; and historians have rarely employed either the analytical tools or the basic theoretical hypotheses of statistical research. It is the thesis of this essay that such failure to effect a close interrelation between historical approach and statistical analysis needs to be corrected in the light of the final goal of economic study.

Wills Lifestyle in India

2017 ◽  
pp. 1-16
Author(s):  
Sunil Chopra
Keyword(s):  
Supply Chain ◽  
Raw Materials ◽  
Supply And Demand ◽  
Third Parties ◽  
The Past ◽  
Relative Value ◽  
High Level

In 2003, ITC responded to the high level of obsolete inventory by shifting risk from finished products to manufacturing and raw materials. This required that their supply chain be much more flexible and responsive than it was in the past. By 2006, changes in the supply chain that included moving manufacturing in-house improved flexibility and responsiveness. Obsolete inventory was significantly reduced and the company was much better at matching supply and demand. Cost, however, continued to be higher than that at third parties. The company had to decide on the appropriate tradeoff between cost and responsiveness when structuring its supply chain.The case illustrates how Wills has changed its supply chain to become more flexible and responsive. This change, however, has come at a cost. The case requires the students to analyze the tradeoff between cost and responsiveness/flexibility to decide on an appropriate level of flexibility/responsiveness. The case also requires the student to understand the relative value of increased flexibility versus increased responsiveness.

scholarly journals Consumer Preferences for Oyster Attributes: Field Experiments on Brand, Locality, and Growing Method

2017 ◽  
Vol 46 (2) ◽  
pp. 315-337 ◽  
Author(s):  
Maik Kecinski ◽  
Kent D. Messer ◽  
Lauren Knapp ◽  
Yosef Shirazi
Keyword(s):  
United States ◽  
Field Experiments ◽  
Consumer Preferences ◽  
Revealed Preference ◽  
The United States ◽  
Dichotomous Choice ◽  
Production Methods ◽  
The Past ◽  
Oyster Aquaculture ◽  
First Time

Oyster aquaculture has experienced tremendous growth in the United States over the past decade, but little is known about consumer preferences for oysters. This study analyzed preferences for oysters with varied combinations of brands, production locations, and production methods (aquaculture vs. wild-caught) using dichotomous choice, revealed preference economic field experiments. Results suggest significant and distinct differences in behavior between first-time and regular oyster consumers. While infrequent oyster consumers were drawn to oysters labeled as wild-caught, experienced oyster consumers preferred oysters raised via aquaculture. These findings will be valuable for growers and policymakers who invest in aquaculture to improve surrounding ecosystems.

scholarly journals Live-Scale Testing of Granular Materials Stabilized with Alkali-Activated Waste Glass and Carbide Lime

2021 ◽  
Vol 11 (23) ◽  
pp. 11286
Author(s):  
Marina Paula Secco ◽  
Débora Thaís Mesavilla ◽  
Márcio Felipe Floss ◽  
Nilo Cesar Consoli ◽  
Tiago Miranda ◽  
...  
Keyword(s):  
Portland Cement ◽  
Mechanical Performance ◽  
Raw Materials ◽  
Sodium Hydroxide Solution ◽  
Fine Sand ◽  
Field Application ◽  
Natural Soil ◽  
In Situ Tests ◽  
Alkali Activated

The increasingly strong search for alternative materials to Portland cement has resulted in the development of alkali-activated cements (AAC) that are very effective at using industrial by-products as raw materials, which also contributes to the volume reduction in landfilled waste. Several studies targeting the development of AAC—based on wastes containing silicon and calcium—for chemical stabilization of soils have demonstrated their excellent performance in terms of durability and mechanical performance. However, most of these studies are confined to a laboratory characterization, ignoring the influence and viability of the in situ construction process and, also important, of the in situ curing conditions. The present work investigated the field application of an AAC based on carbide lime and glass wastes to stabilize fine sand acting as a superficial foundation. The assessment was supported on the unconfined compressive strength (UCS) and initial shear modulus (G0) of the developed material, and the field results were compared with those prepared in the laboratory, up to 120 days curing. In situ tests were also developed on the field layers (with diameters of 450 and 900 mm and thickness of 300 mm) after different curing times. To establish a reference, the mentioned precursors were either activated with a sodium hydroxide solution or hydrated with water (given the reactivity of the lime). The results showed that the AAC-based mixtures developed greater strength and stiffness at a faster rate than the water-based mixtures. Specimens cured under controlled laboratory conditions showed better results than the samples collected in the field. The inclusion of the stabilized layers clearly increased the load-bearing capacity of the natural soil, while the different diameters produced different failure mechanisms, similar to those found in Portland cement stabilization.

Sign in / Sign up

Export Citation Format

Share Document