Thixomolding® at 25 Years

2016 ◽  
Vol 256 ◽  
pp. 3-8 ◽  
Author(s):  
Raymond Decker ◽  
Stephen LeBeau ◽  
Bill Wilson ◽  
John Reagan ◽  
Nir Moskovich ◽  
...  
Keyword(s):  
Thermomechanical Processing ◽  
Dead Sea ◽  
Mg Alloys ◽  
Raw Material ◽  
Commercial Development ◽  
Die Life ◽  
Part Yield ◽  
Wide Range ◽  
Semi Solid ◽  
Set Up

The technical and commercial development of Thixomolding® of magnesium (Mg) alloys is described. Based on the MIT semi-solid casting discovery, Dow Chemical adaption to Mg and Thixomat technical findings, Thixomat commercialized this process world-wide with Japan Steel Works (JSW) and numerous licensees in 13 countries. Some 480 Thixomolding machines have been commissioned by JSW to produce a wide range of parts for application in the communication/electronic, auto, sporting goods and hand-held tool markets. The advantages over conventional casting of Mg have been established in cleanliness, safety, worker comfort, machine portability, longer die life and reduced scrap. The competiveness of Thixomolding Mg has been enhanced by more durable and less expensive machine parts, longer die life, higher raw material yields by using hot nozzles and amenability to using recycled Mg scrap. The portability of this “foundry inside a machine” and availability of pre-owned machines allows quick set-up of Thixomolding operations. Several technical advances in Thixomolding are described. Solids content was optimized. Hot nozzles increased the part yield to >90% of the granule Mg alloy feed. Special steel barrels and liners are available to substitute for expensive Superalloys. In addition to conventional AZ91D and AM60, a wide range of Mg alloys can be Thixomolded. With Dead Sea Magnesium, AM70-TH and AJX810-TH were developed for improved ductility or creep strength. Low porosity and fine grain size of Thixomolding open the door to blister-free thermomechanical processing (TTMP) to boost the tensile and fatigue strength and ductility.

Automation of Process Control in Chemical Plant

2015 ◽  
Vol 2 (1) ◽  
pp. 6-12
Author(s):  
Agus Sugiarta ◽  
Houtman P. Siregar ◽  
Dedy Loebis
Keyword(s):  
Process Control ◽  
Pid Control ◽  
Control Algorithm ◽  
Chemical Engineering ◽  
Chemical Plant ◽  
Raw Material ◽  
Flow Rates ◽  
Material Supply ◽  
Wide Range ◽  
Inherent Problem

Automation of process control in chemical plant is an inspiring application field of mechatronicengineering. In order to understand the complexity of the automation and its application requireknowledges of chemical engineering, mechatronic and other numerous interconnected studies.The background of this paper is an inherent problem of overheating due to lack of level controlsystem. The objective of this research is to control the dynamic process of desired level more tightlywhich is able to stabilize raw material supply into the chemical plant system.The chemical plant is operated within a wide range of feed compositions and flow rates whichmake the process control become difficult. This research uses modelling for efficiency reason andanalyzes the model by PID control algorithm along with its simulations by using Matlab.

Settlers or Movers? The Temporality of Past Migrations, Political Inaction and its Consequences, 1945–1985

2018 ◽  
Author(s):  
Jozefien De Bock
Keyword(s):  
Temporary Workers ◽  
Guest Workers ◽  
Temporary Migration ◽  
Wide Range ◽  
Settler Societies ◽  
Future Policy ◽  
Set Up ◽  
Legal Frameworks ◽  
Temporary Migrants ◽  
Multicultural Policies

Historically, those societies that have the longest tradition in multicultural policies are settler societies. The question of how to deal with temporary migrants has only recently aroused their interest. In Europe, temporary migration programmes have a much longer history. In the period after WWII, a wide range of legal frameworks were set up to import temporary workers, who came to be known as guest workers. In the end, many of these ‘guests’ settled in Europe permanently. Their presence lay at the basis of European multicultural policies. However, when these policies were drafted, the former mobility of guest workers had been forgotten. This chapter will focus on this mobility of initially temporary workers, comparing the period of economic growth 1945-1974 with the years after the 1974 economic crisis. Further, it will look at the kind of policies that were developed towards guest workers in the era before multiculturalism. This way, it shows how their consideration as temporary residents had far-reaching consequences for the immigrants, their descendants and the receiving societies involved. The chapter will finish by suggesting a number of lessons from the past. If the mobility-gap between guest workers and present-day migrants is not as big as generally assumed, then the consequences of previous neglect should serve as a warning for future policy making.

ORAL HISTORY SOURCES AS LEARNING MATERIALS: A CASE STUDY OF THE NATIONAL UNIVERSITY OF SCIENCE AND TECHNOLOGY

2016 ◽  
Vol 3 (2) ◽  
pp. 82-93
Author(s):  
Gugulethu Shamaine Nkala ◽  
Rodreck David
Keyword(s):  
Oral History ◽  
Learning Experience ◽  
Science And Technology ◽  
Group Discussion ◽  
Human Interaction ◽  
Learning Material ◽  
Wide Range ◽  
National Archives ◽  
National University ◽  
Set Up

Knowledge presented by Oral History (OH) is unique in that it shares the tacit perspective, thoughts, opinions and understanding of the interviewee in its primary form. While teachers, lecturers and other education specialists have at their disposal a wide range of primary, secondary and tertiary sources upon which to relate and share or impart knowledge, OH presents a rich source of information that can improve the learning and knowledge impartation experience. The uniqueness of OH is presented in the following advantages of its use: it allows one to learn about the perspectives of individuals who might not otherwise appear in the historical record; it allows one to compensate for the digital age; one can learn different kinds of information; it provides historical actors with an opportunity to tell their own stories in their own words; and it offers a rich opportunity for human interaction. This article discusses the placement of oral history in the classroom set-up by investigating its use as a source of learning material presented by the National Archives of Zimbabwe to students in the Department of Records and Archives Management at the National University of Science and Technology (NUST). Interviews and a group discussion were used to gather data from an archivist at the National Archives of Zimbabwe, lecturers and students in the Department of Records and Archives Management at NUST, respectively. These groups were approached on the usability, uniqueness and other characteristics that support this type of knowledge about OH in a tertiary learning experience. The findings indicate several qualities that reflect the richness of OH as a teaching source material in a classroom set-up. It further points to weak areas that may be addressed where the source is considered a viable strategy for knowledge sharing and learning. The researchers present a possible model that can be used to champion the use of this rich knowledge source in classroom education at this university and in similar set-ups. 

Nanofiltration of endocrine disrupting compounds

2003 ◽  
Vol 3 (5-6) ◽  
pp. 321-327 ◽  
Author(s):  
M. Gallenkemper ◽  
T. Wintgens ◽  
T. Melin
Keyword(s):  
Wastewater Treatment ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Endocrine Disrupting Compounds ◽  
Municipal Wastewater Treatment ◽  
Water And Wastewater Treatment ◽  
Wide Range ◽  
Endocrine Disrupting ◽  
Municipal Wastewater Treatment Plants ◽  
Set Up

Endocrine disrupting compounds can affect the hormone system in organisms. A wide range of endocrine disrupters were found in sewage and effluents of municipal wastewater treatment plants. Toxicological evaluations indicate that conventional wastewater treatment plants are not able to remove these substances sufficiently before disposing effluent into the environment. Membrane technology, which is proving to be an effective barrier to these substances, is the subject of this research. Nanofiltration provides high quality permeates in water and wastewater treatment. Eleven different nanofiltration membranes were tested in the laboratory set-up. The observed retention for nonylphenol (NP) and bisphenol A (BPA) ranged between 70% and 100%. The contact angle is an indicator for the hydrophobicity of a membrane, whose influence on the permeability and retention of NP was evident. The retention of BPA was found to be inversely proportional to the membrane permeability.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals A System-Agnostic, Adaptable and Extensible Animal Support Cradle System for Cardio-Respiratory-Synchronised, and Other, Multi-Modal Imaging of Small Animals

Tomography ◽  
2021 ◽  
Vol 7 (1) ◽  
pp. 39-54
Author(s):  
Veerle Kersemans ◽  
Stuart Gilchrist ◽  
Philip Danny Allen ◽  
Sheena Wallington ◽  
Paul Kinchesh ◽  
...  
Keyword(s):  
Scientific Data ◽  
Cardiac Monitoring ◽  
Small Animals ◽  
Maintenance System ◽  
Wide Range ◽  
Set Up ◽  
Animal Handling ◽  
Imaging Performance ◽  
Significant Effort

Standardisation of animal handling procedures for a wide range of preclinical imaging scanners will improve imaging performance and reproducibility of scientific data. Whilst there has been significant effort in defining how well scanners should operate and how in vivo experimentation should be practised, there is little detail on how to achieve optimal scanner performance with best practices in animal welfare. Here, we describe a system-agnostic, adaptable and extensible animal support cradle system for cardio-respiratory-synchronised, and other, multi-modal imaging of small animals. The animal support cradle can be adapted on a per application basis and features integrated tubing for anaesthetic and tracer delivery, an electrically driven rectal temperature maintenance system and respiratory and cardiac monitoring. Through a combination of careful material and device selection, we have described an approach that allows animals to be transferred whilst under general anaesthesia between any of the tomographic scanners we currently or have previously operated. The set-up is minimally invasive, cheap and easy to implement and for multi-modal, multi-vendor imaging of small animals.

New insights on Laminaria digitata ultrastructure through combined conventional chemical fixation and cryofixation

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Christos Katsaros ◽  
Sophie Le Panse ◽  
Gillian Milne ◽  
Carl J. Carrano ◽  
Frithjof Christian Küpper
Keyword(s):  
Cell Wall ◽  
General Structure ◽  
Raw Material ◽  
Rocky Shores ◽  
Chemical Fixation ◽  
Laminaria Digitata ◽  
Vegetative Cells ◽  
Biological Studies ◽  
New Findings ◽  
Wide Range

Abstract The objective of the present study is to examine the fine structure of vegetative cells of Laminaria digitata using both chemical fixation and cryofixation. Laminaria digitata was chosen due to its importance as a model organism in a wide range of biological studies, as a keystone species on rocky shores of the North Atlantic, its use of iodide as a unique inorganic antioxidant, and its significance as a raw material for the production of alginate. Details of the fine structural features of vegetative cells are described, with particular emphasis on the differences between the two methods used, i.e. conventional chemical fixation and freeze-fixation. The general structure of the cells was similar to that already described, with minor differences between the different cell types. An intense activity of the Golgi system was found associated with the thick external cell wall, with large dictyosomes from which numerous vesicles and cisternae are released. An interesting type of cisternae was found in the cryofixed material, which was not visible with the chemical fixation. These are elongated structures, in sections appearing tubule-like, close to the external cell wall or to young internal walls. An increased number of these structures was observed near the plasmodesmata of the pit fields. They are similar to the “flat cisternae” found associated with the forming cytokinetic diaphragm of brown algae. Their possible role is discussed. The new findings of this work underline the importance of such combined studies which reveal new data not known until now using the old conventional methods. The main conclusion of the present study is that cryofixation is the method of choice for studying Laminaria cytology by transmission electron microscopy.

scholarly journals LED Rail Signals: Full Hardware Realization of Apparatus with Independent Intensity by Temperature Changes

Electronics ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1291
Author(s):  
Giuseppe Schirripa Schirripa Spagnolo ◽  
Fabio Leccese
Keyword(s):  
Temperature Sensor ◽  
Energy Efficient ◽  
Light Emitting Diode ◽  
Junction Temperature ◽  
Light Emitting ◽  
Temperature Changes ◽  
Wide Range ◽  
International Regulations ◽  
Long Lifetime ◽  
Set Up

Nowadays, signal lights are made using light-emitting diode arrays (LEDs). These devices are extremely energy efficient and have a very long lifetime. Unfortunately, especially for yellow/amber LEDs, the intensity of the light is closely related to the junction temperature. This makes it difficult to design signal lights to be used in naval, road, railway, and aeronautical sectors, capable of fully respecting national and international regulations. Furthermore, the limitations prescribed by the standards must be respected in a wide range of temperature variations. In other words, in the signaling apparatuses, a system that varies the light intensity emitted according to the operating temperature is useful/necessary. In this paper, we propose a simple and effective solution. In order to adjust the intensity of the light emitted by the LEDs, we use an LED identical to those used to emit light as a temperature sensor. The proposed system was created and tested in the laboratory. As the same device as the ones to be controlled is used as the temperature sensor, the system is very stable and easy to set up.

scholarly journals Entropic measure unveils country competitiveness and product specialization in the World trade web

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Gianluca Teza ◽  
Michele Caraglio ◽  
Attilio L. Stella
Keyword(s):  
Iterative Scheme ◽  
Entropy Function ◽  
Bipartite Networks ◽  
Complexity Measures ◽  
Wide Range ◽  
Self Consistent ◽  
Set Up ◽  
Technical Features ◽  
Country Competitiveness ◽  
Entropic Measure

AbstractWe show how the Shannon entropy function can be used as a basis to set up complexity measures weighting the economic efficiency of countries and the specialization of products beyond bare diversification. This entropy function guarantees the existence of a fixed point which is rapidly reached by an iterative scheme converging to our self-consistent measures. Our approach naturally allows to decompose into inter-sectorial and intra-sectorial contributions the country competitivity measure if products are partitioned into larger categories. Besides outlining the technical features and advantages of the method, we describe a wide range of results arising from the analysis of the obtained rankings and we benchmark these observations against those established with other economical parameters. These comparisons allow to partition countries and products into various main typologies, with well-revealed characterizing features. Our methods have wide applicability to general problems of ranking in bipartite networks.

Sign in / Sign up

Export Citation Format

Share Document