Characterization of a Semiconductor Packaging System utilizing Through Glass Via (TGV) Technology

2015 ◽  
Vol 2015 (DPC) ◽  
pp. 001378-001407
Author(s):  
Tim Mobley ◽  
Roupen Keusseyan ◽  
Tim LeClair ◽  
Konstantin Yamnitskiy ◽  
Regi Nocon
Keyword(s):  
Low Cost ◽  
Glass Wafer ◽  
Wafer Level ◽  
Packaging System ◽  
Thin Glass ◽  
Wafer Level Packaging ◽  
Recent Developments ◽  
And Performance ◽  
New Generation ◽  
Semiconductor Packaging

Recent developments in hole formations in glass, metalizations in the holes, and glass to glass sealing are enabling a new generation of designs to achieve higher performance while leveraging a wafer level packaging approach for low cost packaging solutions. The need for optical transparency, smoother surfaces, hermetic vias, and a reliable platform for multiple semiconductors is growing in the areas of MEMS, Biometric Sensors, Medical, Life Sciences, and Micro Display packaging. This paper will discuss the types of glass suitable for packaging needs, hole creation methods and key specifications required for through glass vias (TGV's). Creating redistribution layers (RDL) or circuit layers on both sides of large thin glass wafer poses several challenges, which this paper will discuss, as well as, performance and reliability of the circuit layers on TGV wafers or substrates. Additionally, there are glass-to-glass welding techniques that can be utilized in conjunction with TGV wafers with RDL, which provide ambient glass-to-glass attachments of lids and standoffs, which do not outgas during thermal cycle and allow the semiconductor devices to be attached first without having to reflow at lower temperatures. Fabrication challenges, reliability testing results, and performance of this semiconductor packaging system will be discussed in this paper.

Wafer Level Micropackaging for RF MEMS Switches

2005 ◽  
Author(s):  
David I. Forehand ◽  
Charles L. Goldsmith
Keyword(s):  
Insertion Loss ◽  
Rf Mems ◽  
Low Cost ◽  
Wafer Level ◽  
Testing Methods ◽  
Mems Switches ◽  
Wafer Level Packaging ◽  
Rf Mems Switches ◽  
And Performance ◽  
Packaging Technique

Wafer-level micro-encapsulation is an innovative, low-cost, wafer-level packaging method for encapsulating RF MEMS switches. This zero-level packaging technique has demonstrated 0.04 dB package added insertion loss at 35 GHz. This article overviews the processes, measurements, and testing methods used for determining the integrity and performance of individual encapsulated RF MEMS packages.

Advanced SiP Packaging Technologies of IPD for Mobile Applications

2010 ◽  
Vol 2010 (DPC) ◽  
pp. 1-20
Author(s):  
Geun Sik Kim ◽  
Kai Liu ◽  
Flynn Carson ◽  
Seung Wook Yoon ◽  
Meenakshi Padmanathan
Keyword(s):  
High Performance ◽  
Low Cost ◽  
Autonomous Systems ◽  
System Level ◽  
Design And Technology ◽  
Wafer Level ◽  
Future Technology ◽  
Rf Transceivers ◽  
And Performance ◽  
3D Stacking

IPD technology was originally developed as a way to replace bulky discrete passive components, but it¡¯s now gaining popularity in ESD/EMI protection applications, as well as in RF, high-brightness LED silicon sub-mounts, and digital and mixed-signal devices. Already well known as a key enabler of system-in-packages (SiPs), IPDs enable the assembly of increasingly complete and autonomous systems with the integration of diverse electronic functions such as sensors, RF transceivers, MEMS, power amplifiers, power management units, and digital processors. The application area for IPD will continue to evolve, especially as new packaging technology, such as flipchip, 3D stacking, wafer level packaging become available to provide vertical interconnections within the IPD. New applications like silicon interposers will become increasingly significant to the market. Currently the IPD market is being driven primarily by RF or wireless packages and applications including, but not limited to, cell phones, WiFi, GPS, WiMAX, and WiBro. In particular, applications and products in the emerging RF CMOS market that require a low cost, smaller size, and high performance are driving demand. In order to get right products in size and performance, packaging design and technology should be considered in device integration and implemented together in IPD designs. In addition, a comprehensive understanding of electrical and mechanical properties in component and system level design is important. This paper will highlight some of the recent advancements in SiP technology for IPD and integration as well as what is developed to address future technology requirements in IPD SiP solutions. The advantage and applications of SiP solution for IPD will be presented with several examples of IPD products. The design, assembly and packaging challenges and performance characteristics will be also discussed.

Evaluation of Polymer Core Solderballs for Wafer Level Reliability Improvements

2014 ◽  
Vol 2014 (DPC) ◽  
pp. 000545-000566
Author(s):  
John Hunt ◽  
Adren Hsieh ◽  
Eddie Tsai ◽  
Chienfan Chen ◽  
Tsaiying Wang
Keyword(s):  
Temperature Cycling ◽  
Wafer Level ◽  
Development Activity ◽  
Wafer Level Packaging ◽  
First Case ◽  
Mask Design ◽  
To Come ◽  
And Performance ◽  
Reliability Performance ◽  
The Impact

Nearly half a century ago the first die bumping was developed by IBM that would later enable what we call Wafer Level Packaging. It took nearly 40 years for Wafer Level Chip Scale Packaging (WLCSP), with all of the “packaging” done while still in wafer form to come into volume production. It began with very small packages having solderball counts of 2–6 I/Os. Over the years, the I/O count has grown, but much of the industry perception has remained that WLCSPs are limited to low I/O count, low power applications. But within the last few years, there have been growing demands for WLCSP packages to expand into applications with higher levels of complexity. With the ever increasing density and performance requirements for components in mobile electronic systems, the need has developed for an expansion of applicability for Wafer Level Package (WLP) technology. Wafer Level packaging has demonstrated a higher level of component density and functionality than has been traditionally available using standard packaging. This has led to the development of WLCSPs with larger die and increasing solderball connectivity counts. Development activity has been ongoing for improved materials and structures to achieve the required reliability performance for these larger die. For this study, we have evaluated several different metallic structures used for polymer core solderballs with two different WLCSP structures. The WLCSP structures which were evaluated included a standard 4-mask design with redistribution layer (RDL), using a Polymer 1, Metal RDL, Polymer2, and Under Bump Metallization (UBM); as well as a 3-mask design with RDL, using a Polymer 1, Metal RDL, and Polymer 2. In the first case, the solderballs are bonded to the UBM, while in the second case the balls are bonded to the RDL, using the Polymer 2 layer as the solder wettable defining layer. All of the combinations are tested using the standard JEDEC Temperature Cycling on Board (TCOB) and Drop Test (DT) methodologies. The two different metallurgies of the polymer core solderballs appear to react differently to the two different WLCSP structures. This suggests that the polymer core solderball compositions may perform best when optimized for the specific WLCSP structures that are manufactured. We will review the results of the impact of the different polymer core metallurgies on the TCOB and DT reliability performance of the WLCSPs, showing the interactions of these materials with the two WLCSP structures.

Innovative 3D Structures Utilizing Wafer Level Fan-Out (WLFO) Technology

2013 ◽  
Vol 2013 (DPC) ◽  
pp. 001486-001519
Author(s):  
Curtis Zwenger ◽  
JinYoung Khim ◽  
YoonJoo Khim ◽  
SeWoong Cha ◽  
SeungJae Lee ◽  
...  
Keyword(s):  
Low Cost ◽  
Ease Of Use ◽  
Wafer Level ◽  
3D Structures ◽  
Wafer Level Packaging ◽  
Functional Convergence ◽  
3D Packaging ◽  
Improved Design ◽  
On Chip ◽  
Mobile Handset

The tremendous growth in the mobile handset, tablet, and networking markets has been fueled by consumer demand for increased mobility, functionality, and ease of use. This, in turn, has been driving an increase in functional convergence and 3D integration of IC devices, resulting in the need for more complex and sophisticated packaging techniques. A variety of advanced IC interconnect technologies are addressing this growing need, such as Thru Silicon Via (TSV), Chip-on Chip (CoC), and Package-on-Package (PoP). In particular, the emerging Wafer Level Fan-Out (WLFO) technology provides unique and innovative extensions into the 3D packaging realm. Wafer Level Fan-Out is a package technology designed to provide increased I/O density within a reduced footprint and profile for low density single & multi-die applications at a lower cost. The improved design capability of WLFO is due, in part, to the fine feature capabilities associated with wafer level packaging. This can allow much more aggressive design rules to be applied compared to competing laminate-based technologies. In addition, the unique characteristics of WLFO enable innovative 3D structures to be created that address the need for IC integration in emerging mobile and networking applications. This paper will review the development of WLFO and its extension into unique 3D structures. In addition, the advantages of these WLFO designs will be reviewed in comparison to current competing packaging technologies. Process & material characterization, design simulation, and reliability data will be presented to show how WLFO is poised to provide robust, reliable, and low cost 3D packaging solutions for advanced mobile and networking products.

Through Silicon Via Technology: Cost effective Cu-TSV Interconnects by EMC3D and Technical Challenges with Cu-TSV

2010 ◽  
Vol 2010 (DPC) ◽  
pp. 000425-000445
Author(s):  
Paul Siblerud ◽  
Rozalia Beica ◽  
Bioh Kim ◽  
Erik Young
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Yield ◽  
Integrated Process ◽  
Wafer Level ◽  
Through Silicon Via ◽  
Wafer Level Packaging ◽  
Current State ◽  
Future Technologies ◽  
Ic Technology

The development of IC technology is driven by the need to increase performance and functionality while reducing size, power and cost. The continuous pressure to meet those requirements has created innovative, small, cost-effective 3-D packaging technologies. 3-D packaging can offer significant advantages in performance, functionality and form factor for future technologies. Breakthrough in wafer level packaging using through silicon via technology has proven to be technologically beneficial. Integration of several key and challenging process steps with a high yield and low cost is key to the general adoption of the technology. This paper will outline the breakthroughs in cost associated with an iTSV or Via-Mid structure in a integrated process flow. Key process technologies enabling 3-D chip:Via formationInsulator, barrier and seed depositionCopper filling (plating),CMPWafer thinningDie to Wafer/chip alignment, bonding and dicing This presentation will investigate these techniques that require interdisciplinary coordination and integration that previously have not been practiced. We will review the current state of 3-D interconnects and the of a cost effective Via-first TSV integrated process.

Consumable Anode Process for SnAg Electroplating

2014 ◽  
Vol 2014 (1) ◽  
pp. 000117-000121
Author(s):  
Marvin Bernt ◽  
Adam McClure
Keyword(s):  
Inert Anode ◽  
Alloy System ◽  
Deposition Potential ◽  
Wafer Level ◽  
Plating Bath ◽  
Wafer Level Packaging ◽  
Free Solder ◽  
Semiconductor Packaging ◽  
Sn Anode ◽  
Liquid Concentrate

Near eutectic tin-silver (SnAg) is currently the alloy of choice for electroplated lead-free solder bumping and Cu pillar capping. While lead-tin (PbSn) is still used in some applications, there has been considerable momentum in moving away from the use of lead in semiconductor packaging. Both solders are normally electroplated as alloys with specific compositions to target a desired melting point. Since the deposition potentials of lead and tin are very close together, they plate with similar characteristics. This makes it possible for PbSn plating systems to use a consumable anode system where the anode composition matches the desired deposit composition. Metals are replenished into the bath in much the same ratio they are consumed. In a SnAg plating bath, the deposition potential of Ag is much more positive than Sn, so very low potential is required for Ag deposition. The plating rate of Ag is generally mass transfer limited. The plating rate of Sn is current controlled. While similar in concept to systems using consumable anodes for plating other metals, the SnAg alloy system presents some unique challenges. Because it is more noble, the Ag+ will deposit onto the Sn anode material by displacement reaction, and passivation will occur. Thus, the Sn anodes cannot come in contact with the Ag+ in the bath. Historically this problem is overcome by using an inert anode and metals replenishment by liquid concentrate. This paper outlines a method for plating SnAg using a consumable Sn anode, thereby reducing cost of ownership (CoO) and increasing bath stability compared to conventional SnAg wafer level packaging (WLP) plating.

BCB-Based Dry Film low k Permanent Polymer with sub 4-μm Vias for Advanced WLP and FO-WLP Applications

2015 ◽  
Vol 2015 (1) ◽  
pp. 000079-000085 ◽  
Author(s):  
Michael Toepper ◽  
Tanja Braun ◽  
Robert Gernhardt ◽  
Martin Wilke ◽  
Piotr Mackowiak ◽  
...  
Keyword(s):  
Laser Scanning ◽  
New Technology ◽  
Side Wall ◽  
Wafer Level ◽  
Major Barrier ◽  
Wafer Level Packaging ◽  
And Performance ◽  
Low K ◽  
Metallization Process ◽  
Dry Film

There is a strong demand to increase the routing density of the RDL to match the requirements for future microelectronic systems which are mainly miniaturization and performance. Photo-resists for structuring the metallization or acting as a mold for electroplating are common for very fine lines and spaces due to the developments in the front-end processing. For example chemical amplified Photo-resists are now moving in the back-end and wafer level packaging process. The results are mainly governed by the performance of the equipment i.e. the photo-tool. This is different for the permanent dielectric polymer material. The major difference in photo-resists and dielectric photo-polymer are the different functions of the material systems. Photo-resists are only temporary masks for subsequent process steps like etching and plating. This is different for the photo-polymers which are a permanent part of the future systems. In this paper a new technology is discussed which uses a laser scanning ablation process and BCB-Based Dry Film low k Permanent Polymer. Laser ablation of polymers is in principle not a new technology. Low speed and high cost was the major barrier. But the combination of a scanning technology together with quartz masks has opened this technology to overcome the limitation of the current photo-polymer process. The new technology is described in detail and the results of structuring BCB-Based Films down to less than 4 μm via diameter in a 15 μm thick film has been shown. The via side wall can be controlled by the fluence of the laser pulse. Test structures have been designed and fabricated to demonstrate the excellent electrical resistivity of the vias using a two-layer metallization process.

Fan-Out Wafer-Level Packaging (FOWLP) of Large Chip with Multiple Redistribution Layers (RDLs)

2017 ◽  
Vol 14 (4) ◽  
pp. 123-131 ◽  
Author(s):  
John Lau ◽  
Ming Li ◽  
Nelson Fan ◽  
Eric Kuah ◽  
Zhang Li ◽  
...  
Keyword(s):  
Thin Layer ◽  
Glass Wafer ◽  
Front Side ◽  
Wafer Level ◽  
Molding Compound ◽  
The Third ◽  
Wafer Level Packaging ◽  
Die Attach ◽  
Solder Balls ◽  
Test Package

This study is for fan-out wafer-level packaging with chip-first (die face-up) formation. Chips with Cu contact-pads on the front side and a die attach film on the backside are picked and placed face-up on a temporary-glass-wafer carrier with a thin layer of light-to-heat conversion material. It is followed by compression molding with an epoxy molding compound (EMC) and a post-mold cure on the reconstituted wafer carrier and then backgrinding the molded EMC to expose the Cu contact-pads of the chips. The next step is to build up the redistribution layers (RDLs) from the Cu contact-pads and then mount the solder balls. This is followed by the debonding of the carrier with a laser and then the dicing of the whole reconstituted wafer into individual packages. A 300-mm reconstituted wafer with a package/die ratio = 1.8 and a die-top EMC cap = 100 μm has also been fabricated (a total of 325 test packages on the reconstituted wafer). This test package has three RDLs; the line width/spacing of the first RDL is 5 μm/5 μm, of the second RDL is 10 μm/10 μm, and of the third RDL is 15 μm/15 μm. The dielectric layer of the RDLs is fabricated with a photosensitive polyimide and the conductor layer of the RDLs is fabricated by electrochemical Cu deposition (ECD).

Sign in / Sign up

Export Citation Format

Share Document