scholarly journals Explicit calculation of indirect global warming potentials for halons using atmospheric models

2009 ◽  
Vol 9 (22) ◽  
pp. 8719-8733 ◽  
Author(s):  
D. Youn ◽  
K. O. Patten ◽  
J.-T. Lin ◽  
D. J. Wuebbles
Keyword(s):  
Global Warming ◽  
Ozone Depletion ◽  
Radiative Forcing ◽  
Radiative Transfer Model ◽  
Explicit Calculation ◽  
Transfer Model ◽  
Atmospheric Models ◽  
Pulse Emission ◽  
Cooling Effects ◽  
Global Warming Potentials

Abstract. The concept of Global Warming Potentials (GWPs) has been extensively used in policy consideration as a relative index for comparing the climate impact of an emitted greenhouse gas (GHG), relative to carbon dioxide with equal mass emissions. Ozone depletion due to emission of chlorinated or brominated halocarbons leads to cooling of the climate system in the opposite direction to the direct warming contribution by halocarbons as GHGs. This cooling is a key indirect effect of the halocarbons on climatic radiative forcing, which is accounted for by indirect GWPs. With respect to climate, it is critical to understand net influences considering direct warming and indirect cooling effects especially for Halons due to the greater ozone-depleting efficiency of bromine over chlorine. Until now, the indirect GWPs have been calculated using a parameterized approach based on the concept of Equivalent Effective Stratospheric Chlorine (EESC) and the observed ozone depletion over the last few decades. As a step towards obtaining indirect GWPs through a more robust approach, we use atmospheric models to explicitly calculate the indirect GWPs of Halon-1211 and Halon-1301 for a 100-year time horizon. State-of-the-art global chemistry-transport models (CTMs) were used as the computational tools to derive more realistic ozone depletion changes caused by an added pulse emission of the two major Halons at the surface. The radiative forcings on climate from the ozone changes have been calculated for indirect GWPs using an atmospheric radiative transfer model (RTM). The simulated temporal variations of global average total column Halons after a pulse perturbation follow an exponential decay with an e-folding time which is consistent with the expected chemical lifetimes of the Halons. Our calculated indirect GWPs for the two Halons are much smaller than those from past studies but are within a single standard deviation of WMO (2007) values and the direct GWP values derived agree with the published values. Our model-based assessment of the Halon indirect GWPs thus confirms the significant importance of indirect effects on climate.

scholarly journals Explicit calculation of indirect global warming potentials for halons using atmospheric models

2009 ◽  
Vol 9 (4) ◽  
pp. 15511-15540
Author(s):  
D. Youn ◽  
K. O. Patten ◽  
J.-T. Lin ◽  
D. J. Wuebbles
Keyword(s):  
Global Warming ◽  
Ozone Depletion ◽  
Radiative Forcing ◽  
Radiative Transfer Model ◽  
Explicit Calculation ◽  
Transfer Model ◽  
Atmospheric Models ◽  
Pulse Emission ◽  
Cooling Effects ◽  
Global Warming Potentials

Abstract. The concept of Global Warming Potentials (GWPs) has been extensively used in policy consideration as a relative index for comparing the climate impact of an emitted greenhouse gas (GHG), relative to carbon dioxide with equal mass emissions. Ozone depletion due to emission of chlorinated or brominated halocarbons leads to cooling of the climate system in the opposite direction to the direct warming contribution by halocarbons as GHGs. This cooling is a key indirect effect of the halocarbons on climatic radiative forcing, which is accounted for by indirect GWPs. With respect to climate, it is critical to understand net influences considering direct warming and indirect cooling effects for Halons. Until now, the indirect GWPs have been calculated using a para\\-meterized approach based on the concept of Equivalent Effective Stratospheric Chlorine (EESC) and the observed ozone depletion over the last few decades. As a step towards obtaining indirect GWPs through a more robust approach, we use atmospheric models to explicitly calculate the indirect GWPs of Halon-1211 and Halon-1301 for a 100-year time horizon. State-of-the-art global chemistry-transport models (CTMs) were used as the computational tools to derive more realistic ozone depletion changes caused by an added pulse emission of the two major Halons at the surface. The radiative forcings on climate from the ozone changes have been calculated for indirect GWPs using an atmospheric radiative transfer model (RTM). The simulated temporal variations of global average total column Halons after a pulse perturbation follow an exponential decay with an e-folding time which is consistent with the expected chemical lifetimes of the Halons. Our calculated indirect GWPs for the two Halons are smaller than past studies although direct GWPs agree with the published values. Nonetheless, our model-based assessment of the Halon indirect GWPs confirms the significant importance of indirect effects on climate.

scholarly journals Aerosol Direct Radiative Effects over China Based on Long-Term Observations within the Sun–Sky Radiometer Observation Network (SONET)

2020 ◽  
Vol 12 (20) ◽  
pp. 3296
Author(s):  
Li Li ◽  
Zhengqiang Li ◽  
Kaitao Li ◽  
Yan Wang ◽  
Qingjiu Tian ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
The Sun ◽  
Radiative Effects ◽  
Observation Network ◽  
Fine Mode ◽  
Cooling Effects ◽  
Semi Arid

To investigate aerosol radiative effects, the Sun–Sky Radiometer Observation Network (SONET) has performed long-term observations of columnar atmospheric aerosol properties at 20 distributed stations around China. The aerosol direct radiative forcing (RF) and efficiency (RFE, the rate at which the atmosphere is forced per unit of aerosol optical depth) were estimated using radiative transfer model simulations based on the ground-based observations dating back to 2009. Results of multi-year monthly average RF illustrated that: the dust-dominant aerosol population at arid and semi-arid sites exerted moderate cooling effects (−8.0~−31.2 W/m2) at the top and bottom of atmosphere (TOA and BOA); RF at continental background site was very weak (−0.8~−2.9 W/m2); fine-mode dominant aerosols at urban and suburban sites exerted moderate cooling effects (−9.3~−24.1 W/m2) at TOA but more significant cooling effects (−19.4~−50.6 W/m2) at BOA; RF at coastal sites was comparable with values of urban sites (−5.5~−19.5 W/m2 at TOA, and −15.6~−44.6 W/m2 at BOA), owing to combined influences by marine and urban–industrial aerosols. Differences between RFE at TOA and BOA indicated that coarse-mode dominant aerosols at arid, semi-arid, and continental background sites were less efficient to warm the atmosphere; but fine-mode dominant aerosols at urban, suburban, and coastal sites were shown to be more efficient to heat the atmosphere.

scholarly journals Atmospheric Lifetimes, Infrared Absorption Spectra, Radiative Forcings and Global Warming Potentials of NF<sub>3</sub> and CFC-115

2016 ◽  
Author(s):  
Anna Totterdill ◽  
Tamás Kovács ◽  
Wuhu Feng ◽  
Sandip Dhomse ◽  
Christopher J. Smith ◽  
...  
Keyword(s):  
Global Warming ◽  
Cross Sections ◽  
Infrared Absorption ◽  
Radiative Forcing ◽  
Climate Model ◽  
Radiative Forcings ◽  
Atmospheric Window ◽  
Infrared Absorption Spectra ◽  
Global Warming Potentials ◽  
Good Agreement

Abstract. Fluorinated compounds such as NF3 and C2F5Cl (CFC-115) are characterised by very large global warming potentials (GWPs) which result from extremely long atmospheric lifetimes and strong infrared absorptions in the atmospheric window. In this study we have experimentally determined the infrared absorption cross-sections of NF3 and CFC-115, calculated the radiative forcing and efficiency using two radiative transfer models and identified the effect of clouds and stratospheric adjustment. The infrared cross sections are in good agreement with previous measurements, whereas the resulting radiative forcings and efficiencies are, on average, around 10 % larger. A whole atmosphere chemistry-climate model was used to determine the atmospheric lifetimes of NF3 and CFC-115 to be (616 ± 34) years and (492 ± 22) years, respectively. The GWPs for NF3 are estimated to be 14 600, 19 400 and 21 400 over 20, 100 and 500 years, respectively. Similarly, the GWPs for CFC-115 are 6120, 8060 and 8630 over 20, 100 and 500 years, respectively.

scholarly journals Subcritical and Supercritical Operation of Innovative Thermal Mechanical Refrigeration System

2020 ◽  
Author(s):  
Ahmad Sleiti ◽  
Wahib Al-Ammari ◽  
Mohammed Al-Khawaja ◽  
Maxim Glushenkov ◽  
Alexander Kronberg
Keyword(s):  
Global Warming ◽  
Ozone Depletion ◽  
Fossil Fuels ◽  
Waste Heat ◽  
Low Frequency ◽  
Low Grade ◽  
Refrigeration System ◽  
Heat System ◽  
Global Warming Potentials ◽  
Carbon Dioxide Co2

Around 17% of the globally generated energy is consumed for residential, commercial, and transportation refrigeration. The current cooling technologies utilize refrigerants with high Ozone Depletion and Global Warming Potentials. Furthermore, the current technologies are expensive alongside with toxicity and flammability hazards. On the other side, energy produced by combustion of fossil fuels results in substantial amounts of waste heat. Therefore, it is necessary to develop new refrigeration technologies that utilize waste heat as a source of energy with ecofriendly refrigerants with zero ozone depletion potential and zero global warming potential. In addition, this thermal mechanical refrigeration (TMR) technology improves the energy efficiency of the source of waste heat system and minimizes the emissions of the carbon dioxide (CO2). In this study, a novel thermo-mechanical refrigeration system is proposed. It operates with low-grade energy sources (such as waste heat) at temperature range of 60 oC to 100 oC. Furthermore, it has the advantage of working with low-frequency driver-compressor unit, which eliminates noise and increases its lifetime. Moreover, the TMR system is adaptable to commercial, transportation, and residential refrigeration applications.

scholarly journals The relationship between net GHG emissions and radiative forcing with an application to Article 4.1 of the Paris Agreement.

2021 ◽  
Author(s):  
Tom M. L. Wigley
Keyword(s):  
Global Warming ◽  
Radiative Forcing ◽  
Ghg Emissions ◽  
Zero Point ◽  
Paris Agreement ◽  
Test Case ◽  
Net Zero ◽  
Global Warming Potentials ◽  
The Relationship

Abstract This paper provides an assessment of Article 4.1 of the Paris Agreement on climate; the main goal of which is to provide guidance on how “to achieve the long-term temperature goal set out in Article 2”. Paraphrasing, Article 4.1 says that, to achieve this end, we should decrease greenhouse gas (GHG) emissions so that net anthropogenic GHG emissions fall to zero in the second half of this century. To aggregate net GHG emissions, 100-year Global Warming Potentials (GWP-100) are commonly used to convert non-CO2 emissions to equivalent CO2 emissions. As a test case using methane, temperature projections using GWP-100 scaling are shown to be seriously in error. This throws doubt on the use of GWP-100 scaling to estimate net GHG emissions. An alternative method to determine the net-zero point for GHG emissions based on radiative forcing is derived. This shows that the net-zero point needs to be reached as early as 2036, much sooner than in the Article 4.1 window. Other scientific flaws in Article 4.1 that further undermine its purpose to guide efforts to achieve the Article 2 temperature targets are discussed.

Radiative forcing over the Arctic of aerosols from the August 2017 Canadian and Greenlandic wildfires

2021 ◽  
Author(s):  
Filippo Calì Quaglia ◽  
Daniela Meloni ◽  
Alcide Giorgio di Sarra ◽  
Tatiana Di Iorio ◽  
Virginia Ciardini ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Radiative Forcing ◽  
Solar Zenith Angle ◽  
Surface Albedo ◽  
High Arctic ◽  
The Arctic ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Aerosol Layer ◽  
Radiative Effect

&lt;p&gt;Extended and intense wildfires occurred in Northern Canada and, unexpectedly, on the Greenlandic West coast during summer 2017. The thick smoke plume emitted into the atmosphere was transported to the high Arctic, producing one of the largest impacts ever observed in the region. Evidence of Canadian and Greenlandic wildfires was recorded at the Thule High Arctic Atmospheric Observatory (THAAO, 76.5&amp;#176;N, 68.8&amp;#176;W, www.thuleatmos-it.it) by a suite of instruments managed by ENEA, INGV, Univ. of Florence, and NCAR. Ground-based observations of the radiation budget have allowed quantification of the surface radiative forcing at THAAO.&amp;#160;&lt;/p&gt;&lt;p&gt;Excess biomass burning chemical tracers such as CO, HCN, H2CO, C2H6, and NH3 were&amp;#160; measured in the air column above Thule starting from August 19 until August 23. The aerosol optical depth (AOD) reached a peak value of about 0.9 on August 21, while an enhancement of wildfire compounds was&amp;#160; detected in PM10. The measured shortwave radiative forcing was -36.7 W/m2 at 78&amp;#176; solar zenith angle (SZA) for AOD=0.626.&lt;/p&gt;&lt;p&gt;MODTRAN6.0 radiative transfer model (Berk et al., 2014) was used to estimate the aerosol radiative effect and the heating rate profiles at 78&amp;#176; SZA. Measured temperature profiles, integrated water vapour, surface albedo, spectral AOD and aerosol extinction profiles from CALIOP onboard CALIPSO were used as model input. The peak&amp;#160; aerosol heating rate (+0.5 K/day) was&amp;#160; reached within the aerosol layer between 8 and 12 km, while the maximum radiative effect (-45.4 W/m2) is found at 3 km, below the largest aerosol layer.&lt;/p&gt;&lt;p&gt;The regional impact of the event that occurred on August 21 was investigated using a combination of atmospheric radiative transfer modelling with measurements of AOD and ground surface albedo from MODIS. The aerosol properties used in the radiative transfer model were constrained by in situ measurements from THAAO. Albedo data over the ocean have been obtained from Jin et al. (2004). Backward trajectories produced through HYSPLIT simulations (Stein et al., 2015) were also employed to trace biomass burning plumes.&lt;/p&gt;&lt;p&gt;The radiative forcing efficiency (RFE) over land and ocean was derived, finding values spanning from -3 W/m2 to -132 W/m2, depending on surface albedo and solar zenith angle. The fire plume covered a vast portion of the Arctic, with large values of the daily shortwave RF (&lt; -50 W/m2) lasting for a few days. This large amount of aerosol is expected to influence cloud properties in the Arctic, producing significant indirect radiative effects.&lt;/p&gt;

scholarly journals Contrasting the direct radiative effect and direct radiative forcing of aerosols

2014 ◽  
Vol 14 (11) ◽  
pp. 5513-5527 ◽  
Author(s):  
C. L. Heald ◽  
D. A. Ridley ◽  
J. H. Kroll ◽  
S. R. H. Barrett ◽  
K. E. Cady-Pereira ◽  
...  
Keyword(s):  
Energy Balance ◽  
Radiative Forcing ◽  
Transport Model ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Radiative Effect ◽  
Chemical Transport Model ◽  
Anthropogenic Aerosols ◽  
Anthropogenic Aerosol ◽  
Direct Radiative Forcing

Abstract. The direct radiative effect (DRE) of aerosols, which is the instantaneous radiative impact of all atmospheric particles on the Earth's energy balance, is sometimes confused with the direct radiative forcing (DRF), which is the change in DRE from pre-industrial to present-day (not including climate feedbacks). In this study we couple a global chemical transport model (GEOS-Chem) with a radiative transfer model (RRTMG) to contrast these concepts. We estimate a global mean all-sky aerosol DRF of −0.36 Wm−2 and a DRE of −1.83 Wm−2 for 2010. Therefore, natural sources of aerosol (here including fire) affect the global energy balance over four times more than do present-day anthropogenic aerosols. If global anthropogenic emissions of aerosols and their precursors continue to decline as projected in recent scenarios due to effective pollution emission controls, the DRF will shrink (−0.22 Wm−2 for 2100). Secondary metrics, like DRE, that quantify temporal changes in both natural and anthropogenic aerosol burdens are therefore needed to quantify the total effect of aerosols on climate.

scholarly journals Dust vertical profile impact on global radiative forcing estimation using a coupled chemical-transport–radiative-transfer model

2013 ◽  
Vol 13 (14) ◽  
pp. 7097-7114 ◽  
Author(s):  
L. Zhang ◽  
Q. B. Li ◽  
Y. Gu ◽  
K. N. Liou ◽  
B. Meland
Keyword(s):  
Heating Rate ◽  
Vertical Profile ◽  
Radiative Forcing ◽  
Asian Dust ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Vertical Profiles ◽  
Dust Source ◽  
Source Regions

Abstract. Atmospheric mineral dust particles exert significant direct radiative forcings and are important drivers of climate and climate change. We used the GEOS-Chem global three-dimensional chemical transport model (CTM) coupled with the Fu-Liou-Gu (FLG) radiative transfer model (RTM) to investigate the dust radiative forcing and heating rate based on different vertical profiles for April 2006. We attempt to actually quantify the sensitivities of radiative forcing to dust vertical profiles, especially the discrepancies between using realistic and climatological vertical profiles. In these calculations, dust emissions were constrained by observations of aerosol optical depth (AOD). The coupled calculations utilizing a more realistic dust vertical profile simulated by GEOS-Chem minimize the physical inconsistencies between 3-D CTM aerosol fields and the RTM. The use of GEOS-Chem simulated vertical profile of dust extinction, as opposed to the FLG prescribed vertical profile, leads to greater and more spatially heterogeneous changes in the estimated radiative forcing and heating rate produced by dust. Both changes can be attributed to a different vertical structure between dust and non-dust source regions. Values of the dust vertically resolved AOD per grid level (VRAOD) are much larger in the middle troposphere, though smaller at the surface when the GEOS-Chem simulated vertical profile is used, which leads to a much stronger heating rate in the middle troposphere. Compared to the FLG vertical profile, the use of GEOS-Chem vertical profile reduces the solar radiative forcing at the top of atmosphere (TOA) by approximately 0.2–0.25 W m−2 over the African and Asian dust source regions. While the Infrared (IR) radiative forcing decreases 0.2 W m−2 over African dust belt, it increases 0.06 W m−2 over the Asian dust belt when the GEOS-Chem vertical profile is used. Differences in the solar radiative forcing at the surface between the use of the GEOS-Chem and FLG vertical profiles are most significant over the Gobi desert with a value of about 1.1 W m−2. The radiative forcing effect of dust particles is more pronounced at the surface over the Sahara and Gobi deserts by using FLG vertical profile, while it is less significant over the downwind area of Eastern Asia.

Sign in / Sign up

Export Citation Format

Share Document