Metals and Semi-Metals in the Semiconductor Device Technologies

1988 ◽  
pp. 439-454
Author(s):  
H. Bernhard Pogge
Keyword(s):  
Semiconductor Device

Defects in β-SiC thin films grown on α-SiC substrates

1988 ◽  
Vol 46 ◽  
pp. 568-569
Author(s):  
Karren L. More
Keyword(s):  
Thin Films ◽  
Semiconductor Device ◽  
Lattice Mismatch ◽  
Chemical Vapor ◽  
Substrate Material ◽  
Growth Interface ◽  
Si Substrates ◽  
Thermal Expansion Coefficients ◽  
Device Applications ◽  
Expansion Coefficients

Beta-SiC is an ideal candidate material for use in semiconductor device applications. Currently, monocrystalline β-SiC thin films are epitaxially grown on {100} Si substrates by chemical vapor deposition (CVD). These films, however, contain a high density of defects such as stacking faults, microtwins, and antiphase boundaries (APBs) as a result of the 20% lattice mismatch across the growth interface and an 8% difference in thermal expansion coefficients between Si and SiC. An ideal substrate material for the growth of β-SiC is α-SiC. Unfortunately, high purity, bulk α-SiC single crystals are very difficult to grow. The major source of SiC suitable for use as a substrate material is the random growth of {0001} 6H α-SiC crystals in an Acheson furnace used to make SiC grit for abrasive applications. To prepare clean, atomically smooth surfaces, the substrates are oxidized at 1473 K in flowing 02 for 1.5 h which removes ∽50 nm of the as-grown surface. The natural {0001} surface can terminate as either a Si (0001) layer or as a C (0001) layer.

Applications of SIMS to electronic materials and devices

1992 ◽  
Vol 50 (2) ◽  
pp. 1682-1683
Author(s):  
S.F. Corcoran
Keyword(s):  
Depth Distribution ◽  
Secondary Ion Mass Spectrometry ◽  
Semiconductor Device ◽  
Electronic Materials ◽  
Profile Analysis ◽  
Semiconductor Industry ◽  
Small Diameter ◽  
Depth Resolution ◽  
Detection Sensitivity

Over the past decade secondary ion mass spectrometry (SIMS) has played an increasingly important role in the characterization of electronic materials and devices. The ability of SIMS to provide part per million detection sensitivity for most elements while maintaining excellent depth resolution has made this technique indispensable in the semiconductor industry. Today SIMS is used extensively in the characterization of dopant profiles, thin film analysis, and trace analysis in bulk materials. The SIMS technique also lends itself to 2-D and 3-D imaging via either the use of stigmatic ion optics or small diameter primary beams.By far the most common application of SIMS is the determination of the depth distribution of dopants (B, As, P) intentionally introduced into semiconductor materials via ion implantation or epitaxial growth. Such measurements are critical since the dopant concentration and depth distribution can seriously affect the performance of a semiconductor device. In a typical depth profile analysis, keV ion sputtering is used to remove successive layers the sample.

Structural and electronic properties of defects in semiconductors

1995 ◽  
Vol 53 ◽  
pp. 4-5
Author(s):  
J.L. Batstone
Keyword(s):  
Semiconductor Device ◽  
Chemical Vapor ◽  
Misfit Strain ◽  
Organic Chemical ◽  
Extended Defects ◽  
Transmission Electron ◽  
Semiconductor Thin Films ◽  
Wide Range ◽  
Metal Organic ◽  
Film Substrate

The development of growth techniques such as metal organic chemical vapor deposition (MOCVD) and molecular beam epitaxy during the last fifteen years has resulted in the growth of high quality epitaxial semiconductor thin films for the semiconductor device industry. The III-V and II-VI semiconductors exhibit a wide range of fundamental band gap energies, enabling the fabrication of sophisticated optoelectronic devices such as lasers and electroluminescent displays. However, the radiative efficiency of such devices is strongly affected by the presence of optically and electrically active defects within the epitaxial layer; thus an understanding of factors influencing the defect densities is required.Extended defects such as dislocations, twins, stacking faults and grain boundaries can occur during epitaxial growth to relieve the misfit strain that builds up. Such defects can nucleate either at surfaces or thin film/substrate interfaces and the growth and nucleation events can be determined by in situ transmission electron microscopy (TEM).

Metal Microstructures in Advanced CMOS Devices

1996 ◽  
Vol 54 ◽  
pp. 358-359
Author(s):  
L. M. Gignac ◽  
K. P. Rodbell
Keyword(s):  
Grain Boundaries ◽  
Semiconductor Device ◽  
Chemical Vapor ◽  
Microstructural Characterization ◽  
Metal Films ◽  
Thin Metal ◽  
Electrical Performance ◽  
Thin Metal Films ◽  
Chemical Vapor Deposited ◽  
Boundary Properties

As advanced semiconductor device features shrink, grain boundaries and interfaces become increasingly more important to the properties of thin metal films. With film thicknesses decreasing to the range of 10 nm and the corresponding features also decreasing to sub-micrometer sizes, interface and grain boundary properties become dominant. In this regime the details of the surfaces and grain boundaries dictate the interactions between film layers and the subsequent electrical properties. Therefore it is necessary to accurately characterize these materials on the proper length scale in order to first understand and then to improve the device effectiveness. In this talk we will examine the importance of microstructural characterization of thin metal films used in semiconductor devices and show how microstructure can influence the electrical performance. Specifically, we will review Co and Ti silicides for silicon contact and gate conductor applications, Ti/TiN liner films used for adhesion and diffusion barriers in chemical vapor deposited (CVD) tungsten vertical wiring (vias) and Ti/AlCu/Ti-TiN films used as planar interconnect metal lines.

Behavior of contact-silicided TFSOI gate structures

1994 ◽  
Vol 52 ◽  
pp. 860-861
Author(s):  
N. David Theodore ◽  
Juergen Foerstner ◽  
Peter Fejes
Keyword(s):  
Semiconductor Device ◽  
Series Resistance ◽  
Field Effect Transistors ◽  
Silicon Layer ◽  
Device Fabrication ◽  
Silicon On Insulator ◽  
Continuous Layer ◽  
Buried Oxide ◽  
Device Structures ◽  
Thin Silicon

As semiconductor device dimensions shrink and packing-densities rise, issues of parasitic capacitance and circuit speed become increasingly important. The use of thin-film silicon-on-insulator (TFSOI) substrates for device fabrication is being explored in order to increase switching speeds. One version of TFSOI being explored for device fabrication is SIMOX (Silicon-separation by Implanted OXygen).A buried oxide layer is created by highdose oxygen implantation into silicon wafers followed by annealing to cause coalescence of oxide regions into a continuous layer. A thin silicon layer remains above the buried oxide (~220 nm Si after additional thinning). Device structures can now be fabricated upon this thin silicon layer.Current fabrication of metal-oxidesemiconductor field-effect transistors (MOSFETs) requires formation of a polysilicon/oxide gate between source and drain regions. Contact to the source/drain and gate regions is typically made by use of TiSi2 layers followedby Al(Cu) metal lines. TiSi2 has a relatively low contact resistance and reduces the series resistance of both source/drain as well as gate regions

Bestimmung des zerebralen Blutflusses mittels des 81 Rb/81 mKr-Generatorsystems

1990 ◽  
Vol 29 (01) ◽  
pp. 7-12 ◽  
Author(s):  
J. Bialy ◽  
F.-J. Hans ◽  
E. Oberhausen ◽  
W.J. Peters ◽  
M. Schmitt ◽  
...  
Keyword(s):  
Blood Flow ◽  
Cerebral Blood Flow ◽  
Blood Circulation ◽  
Semiconductor Device ◽  
Animal Experiments ◽  
Initial Value ◽  
Brain Arteries ◽  
Sufficient Concentration ◽  
Static Quantity

A method is being developed which not only measures cerebral blood flow as a static quantity but also its changes with time. For that purpose a semiconductor device ascertains the proportion of intracerebral81 Rb and 81mKr activities. By opening the haemato-encephalic barrier in animal experiments a sufficient concentration of intracerebral81 Rb could be attained and the modified blood circulation after step-wise ligature of all brain arteries brought into relation to the corresponding Rb/Kr quotient. Over the range from undisturbed to completely interrupted cerebral blood flow this quotient varied up to 25% of its initial value.

Method of Detecting Trace Metal Contamination in Thick-Film SOI Device

2005 ◽  
Author(s):  
Yasunori Goto ◽  
Hiroomi Eguchi ◽  
Masaru Iida
Keyword(s):  
Trace Metal ◽  
Thick Film ◽  
Metal Contamination ◽  
Semiconductor Device ◽  
Trace Element Analysis ◽  
Silicon On Insulator ◽  
Element Analysis ◽  
Trace Metal Contamination ◽  
Trace Metal Elements ◽  
Output Characteristics

Abstract In the automotive IC using thick-film silicon on insulator (SOI) semiconductor device, if the gettering capability of a SOI wafer is inadequate, electrical characteristics degradation by metal contamination arises and the yield falls. At this time, an automotive IC was made experimentally for evaluation of the gettering capability as one of the purposes. In this IC, one of the output characteristics varied from the standard, therefore failure analysis was performed, which found trace metal elements as one of the causes. By making full use of 3D perspective, it is possible to fabricate a site-specific sample into 0.1 micrometre in thickness without missing a failure point that has very minute quantities of contaminant in a semiconductor device. Using energy dispersive X-ray, it is possible to detect trace metal contamination at levels 1E12 atoms per sq cm. that are conventionally detected only by trace element analysis.

Localization of a Complex Failure by Combining ATPG and Customer-Oriented Application Testing

2013 ◽  
Author(s):  
Kai Wang ◽  
Rhys Weaver ◽  
David Johnson
Keyword(s):  
Failure Analysis ◽  
Semiconductor Device ◽  
Digital Design ◽  
Radio Communication ◽  
Communication Failure ◽  
Systemic Analysis ◽  
Rf Communication ◽  
System On A Chip ◽  
Electrical Diagnostics ◽  
Failure Location

Abstract A systemic analysis was chosen to evaluate a real case Bluetooth (BT) radio failure in the aspects of RF communication, digital design, firmware, application software, semiconductor device physics and processing, and failure analysis. This paper explores the range of testing, including customer application testing, required to confirm and localize a BT RF communication failure. It shows that the radio communication failure was not, as expected, caused by faulty radio hardware; it was rather linked to problematic encryption hardware at the assistance of the Synergy BT to mobile application. The paper also explores that the digital fault can only be detected by the timing sensitive transition fault scan patterns and how to obtain the physical failure location. Thus, the combination of ATPG and application testing provides a consistency between electrical diagnostics which yields a higher success rate at subsequent physical failure analysis of complex modern RF System on a Chip.

Sign in / Sign up

Export Citation Format

Share Document