The Demographics of Trade-Affected Services and Manufacturing Workers (1987–1990): A Comparative Analysis

1995 ◽  
Vol 23 (4) ◽  
pp. 43-67
Author(s):  
Bartholomew Armah
Keyword(s):  
Manufacturing Industry ◽  
Service Sector ◽  
Manufacturing Sector ◽  
College Education ◽  
Service Industries ◽  
Highly Educated ◽  
Black And White ◽  
Industry Group ◽  
White Males ◽  
Group A

Using input-output data for 1987 and 1990, this study identifies the demographic characteristics of trade-affected workers in U.S. manufacturing and service industries. Trade-affected workers are defined as employees in industries that experienced a change (positive or negative) in net total (direct and indirect) trade-related employment between 1987 and 1990. For the period 1987–1990, three industry categories were examined: (a) industries that experienced an increase in positive net trade-related employment; (b) industries that experienced a decline in positive net trade-related employment; and (c) industries that suffered net trade-related employment losses in both years yet experienced an improvement over the period. The study finds that, while manufacturing industry workers in the most favorably affected industry group (i.e., group “a”) were more likely to be highly skilled (i.e., scientists & engineers), highly educated (i.e., over four years of college education), unionized, married and white males, corresponding service sector workers were predominantly unskilled (laborers), less educated, non-unionized, young (i.e., aged 16–24) and male (black and white). Furthermore, the service sector was associated with greater mean trade-related employment and output gains and lower mean employment and output losses than was the manufacturing sector.

Implementation of lean in IT SME company: an Italian case

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Marco Torri ◽  
Kaustav Kundu ◽  
Stefano Frecassetti ◽  
Matteo Rossini
Keyword(s):  
Manufacturing Industry ◽  
Service Sector ◽  
Manufacturing Sector ◽  
Single Case ◽  
Value Added ◽  
Lean Implementation ◽  
Content Type ◽  
Italian Case ◽  
Lean Practices

Purpose In spite of huge advancement of Lean in the manufacturing sector, its advantage in the service sector is not fully investigated. The purpose of this paper is to cover this gap in particular for the information technology (IT) sector through the implementation of the Lean philosophy in a small- and medium-sized enterprise (SME), operating in the IT sector. Design/methodology/approach A case study is conducted and following the A3 model, Lean is deployed in the case company. Data were collected through on-site interviews, waste sources were identified and then countermeasures for their reduction were proposed and adopted. Findings This study reveals that the implementation of the Lean practices in an SME operating in the IT sector offers good operative and financial results, thanks to the higher productivity obtained through the reduction of non-value-added activities. Research limitations/implications This paper reports a single case study, not enough to generalize the results. Moreover, more Lean tools and practices should be tested in IT companies to assess their effectiveness. Practical implications This paper increments the knowledge base for the application of Lean and A3 model outside the manufacturing industry. This paper should assist practitioners and consultants who have the desire to understand a better way of Lean implementation in fast-growing IT industry and in SME. Originality/value Research on Lean implementation in an SME company and in IT sector is scarce. This study aims to assess the efficiency of the adoption of Lean practices following the A3 model. The results could be highly valuable for similar companies (dimension or sector), especially those that are facing transition situations in terms of size and at the same time want to improve their operations performance, efficiency and avoid waste.

Some Social and Spatial Aspects of Services

1987 ◽  
Vol 5 (1) ◽  
pp. 5-26 ◽  
Author(s):  
J Urry
Keyword(s):  
Social Relations ◽  
Financial Services ◽  
Manufacturing Industry ◽  
Service Sector ◽  
Service Industries ◽  
Complex Nature ◽  
Consumer Services ◽  
Extensive Growth ◽  
High Employment ◽  
The Impact

Five related issues involved in the analysis of services are discussed. First, it is shown that it is incorrect to suggest that there is a single route to the contemporary economy with high employment in the service sector. The Fisher–Clark thesis is discussed and criticised. In the specific case of the United Kingdom it is shown that service industries were of considerable importance even during the supposed heyday of Victorian manufacturing industry. This is shown by analysing certain regional indicators. It is further suggested that the crucial role of especially financial services cannot be understood separately from the broader Makler or middleman economy which in part predated the extensive growth of manufacturing industry. Second, some of the recent arguments of Gershuny and Miles are analysed. It is shown that their formulations are insufficiently social, both in the sense of ignoring changes in the social relations underpinning capitalist production both of manufacturing and of service industries, and of neglecting the impact of ‘social struggles' on the forms and levels of service employment. Third, a number of criteria are discussed by which different service industries can be separated off from each other. The criteria considered are ownership, market, product, degree of ‘commodification’, function, and character of the exchange. A classification based on elements of each of these is proposed in order to deal with UK data sources. Fourth, analysis is developed of eleven different forms of service sector restructuring. Some consideration is paid to the problems of explaining which of these will be found in particular sectors. Particular attention is devoted to considering the degree of importance of the ‘labour’ factor. Last, some of the processes affecting the ‘private consumer services' concerned with tourism are analysed. In particular, attention is devoted to aspects of the physical and social setting within which the service delivery takes place. An attempt is made to demonstrate which particular forms of service sector restructuring will be found in those tourist services in British coastal resorts. The exceptionally complex nature of the forces affecting employment levels in such places is shown in some detail.

The Earnings Effect of Black Matriculation in Predominantly White Colleges

ILR Review ◽  
1980 ◽  
Vol 33 (4) ◽  
pp. 518-524 ◽  
Author(s):  
Mickey L. Burnim
Keyword(s):  
Predominantly White ◽  
Black Males ◽  
College Education ◽  
Data Bank ◽  
Colleges And Universities ◽  
Earnings Differential ◽  
Black And White ◽  
White Males ◽  
Earnings Functions ◽  
Reported Data

This study attempts to ascertain the extent to which the narrowing earnings differential between black and white males with college education is caused, as some have suggested, by the matriculation of blacks in predominantly white colleges and universities. To examine this question, a relatively new and little-used data base created and maintained by the Project TALENT Data Bank is used. The data used are for a group of persons who were in the tenth, eleventh, and twelfth grades in 1960 and who later reported data on their earnings eleven years after their high school graduation. Four hourly earnings functions were estimated: one for all black males, one for all white males, and then one each for black males who attended one of the traditionally black colleges and universities and for black males who attended one of the predominantly white colleges and universities. The analysis shows that the total effects of college study, at each of the examined levels, were very nearly the same, thus refuting the “white-college hypothesis.”

scholarly journals Technological Trends in the Manufacturing and Service Sectors. The Case of Montenegro

2021 ◽  
Vol 16 (1) ◽  
pp. 120-133
Author(s):  
Nina Vujanović
Keyword(s):  
Service Sector ◽  
Manufacturing Sector ◽  
Service Industries ◽  
Firm Level ◽  
Level Data ◽  
Technological Efficiency ◽  
Service Sectors ◽  
Policy Measures ◽  
Technological Improvements ◽  
Further Development

Abstract Technological efficiency is one of the main factors of economic growth in modern history. Technologies have traditionally been important for manufacturing sector, but the age of digitalization has also made service sector increasingly rely on modern technologies. There are not many studies measuring the technological trends of these two sectors. This study uses the micro approach of the dynamic panel to measure productivity of the manufacturing and service sectors in Montenegro during 2010 to 2019, between the two global economic crises, using firm level data. The results indicate a clear upward technological trend in manufacturing but not in the service sector. Divergent technological trends are found amongst the manufacturing and service industries that require different level of technologies and knowledge in their production processes. The study concludes that there is a room for further technological improvements in both sectors and proposes concrete policy measures for further development.

M. A. Ayuh. Made in Jamaica: The Development of Manufacturing Sector. Baltimore: The Johns Hopkins University Press. 1981. xxii+128 pp.

1986 ◽  
Vol 25 (1) ◽  
pp. 93-95
Author(s):  
Najam-us- Saqib
Keyword(s):  
Manufacturing Industry ◽  
Manufacturing Sector ◽  
Policy Makers ◽  
Industrial Base ◽  
Johns Hopkins University ◽  
Key Characteristics ◽  
The World ◽  
Caribbean Country ◽  
Bauxite Ore ◽  
Made In

Jamaica, known in the world for her rich deposits of bauxite ore, is a small Caribbean country with an area of 10991 square kilometers and a population of just over two million individuals. This beautifu11and, which was described by Columbus as "The fairest isle that eyes have beheld" has developed a remarkably diversified manufacturing sector starting from a modest industrial base. Jamaica's manufacturing industry enjoyed a respectable growth rate of about 6 percent per annum during the good old days of the euphoric '50s and '60s. However, those bright sunny days ''when to live was bliss" were followed by the chilling winter of much subdued progress. The rise and fall of growth have aroused considerable interest among economists and policy• makers. The book under review probes the causes of this behaviour by analysing key characteristics of Jamaican manufacturing sector and tracing its path of evolution.

scholarly journals Mechanisms of Environmental Regulation’s Impact on Green Technological Progress—Evidence from China’s Manufacturing Sector

2021 ◽  
Vol 13 (4) ◽  
pp. 1600
Author(s):  
Weijiang Liu ◽  
Mingze Du ◽  
Yuxin Bai
Keyword(s):  
Sustainable Development ◽  
Energy Consumption ◽  
Technological Change ◽  
Environmental Protection ◽  
Technological Progress ◽  
Manufacturing Industry ◽  
Manufacturing Sector ◽  
The Sustainable Development ◽  
Biased Technological Change ◽  
Chinese Manufacturing Industry

As the world’s largest developing country, and as the home to many of the world’s factories, China plays a crucial role in the sustainable development of the world economy regarding environmental protection, energy conservation, and emission reduction issues. Based on the data from 2003–2015, this paper examined the green total factor productivity and the technological progress in the Chinese manufacturing industry. A slack-based measure (SBM) Malmquist productivity index was used to measure the bias of technological change (BTC), input-biased technological change (IBTC), and output-biased technological change (OBTC) by decomposing the technological progress. It also investigated the mechanism of environmental regulation, property right structure, enterprise-scale, energy consumption structure, and other factors on China’s technological progress bias. The empirical results showed the following: (1) there was a bias of technological progress in the Chinese manufacturing industry during the research period; (2) although China’s manufacturing industry’s output tended to become greener, it was still characterized by a preference for overall CO2 output; and (3) the impact of environmental regulations on the Chinese manufacturing industry’s technological progress had a significant threshold effect. The flexible control of environmental regulatory strength will benefit the Chinese manufacturing industry’s technological development. (4) R&D investment, export delivery value, and structure of energy consumption significantly contributed to promoting technological progress. This study provides further insight into the sustainable development of China’s manufacturing sector to promote green-biased technological progress and to achieve the dual goal of environmental protection and healthy economic growth.

The Service Sector in the United States, 1839 to 1899

1967 ◽  
Vol 27 (4) ◽  
pp. 625-628 ◽  
Author(s):  
Thomas Weiss
Keyword(s):  
United States ◽  
Service Sector ◽  
Value Added ◽  
The United States ◽  
Professional Services ◽  
Service Industries ◽  
Public Utilities ◽  
Personal Services ◽  
Government Education ◽  
Quantitative Development

The dissertation is a study of the service industries in the United States during the period 1839 through 1899. The primary purpose of the study is to provide three series relating to the quantitative development of the sector. These series—value-added, gainful workers, and capital stock—provide benchmark estimates at decade intervals centered on census years. Series are presented for the aggregate sector; the major components, final and intermediate services; and eight industries. These eight industries, defined as the service sector, are trade, transportation and public utilities, finance and insurance, professional services, personal services, government, education, and the independent hand trades.

Ressourceneffizienz durch Digitalisierung*/Resource efficiency through digitisation. Potentials for SMEs in the manufacturing industry

2018 ◽  
Vol 108 (05) ◽  
pp. 319-324
Author(s):  
I. Bogdanov ◽  
A. Nuffer ◽  
A. Sauer
Keyword(s):  
Manufacturing Industry ◽  
State Of The Art ◽  
Manufacturing Sector ◽  
Resource Efficiency ◽  
Digitale Transformation ◽  
Case Study Analysis ◽  
Current State ◽  
Stand Der Technik ◽  
A Current

Der vorliegende Beitrag behandelt den Themenkomplex Ressourcen-effizienz und digitale Transformation im verarbeitenden Gewerbe sowie die dabei entstehenden Wechselwirkungen. Neben dem aktuellen Stand der Technik werden die im Rahmen einer aktuellen Studie durchgeführte Fallbeispielanalyse und die entwickelte Methodik zur Ermittlung der Ressourceneffizienzpotenziale vorgestellt. Diese Potenziale und die eingesetzten digitalen Maßnahmen sind zentrale Bausteine des vorliegenden Beitrags.   This article deals with the topic complex of resource efficiency and digital transformation in the manufacturing sector as well as the resulting interactions. In addition to the current state of the art and perspectives, the case study analysis carried out as part of a current study, as well as the developed method for establishing the resource efficiency potentials will be presented. The resultant potential and the digital measures are central components of this article.

Sustainability assessment in the manufacturing industry: a review of recent studies

2018 ◽  
Vol 25 (8) ◽  
pp. 3162-3179 ◽  
Author(s):  
Shamraiz Ahmad ◽  
Kuan Yew Wong
Keyword(s):  
Manufacturing Industry ◽  
Sustainability Assessment ◽  
Manufacturing Sector ◽  
Social Indicators ◽  
Sustainable Manufacturing ◽  
Manufacturing Industries ◽  
Bottom Line ◽  
Content Type ◽  
The Status ◽  
Different Levels

Purpose The purpose of this paper is to review and analyze the recent sustainability assessment studies in the manufacturing industry from the triple-bottom-line (TBL) perspective. This paper aims to depict the status quo of practical sustainability assessment, summarize the different levels and boundaries of evaluation, and highlight the difficulties and further improvements needed to make the assessment more effective in the manufacturing industry. Design/methodology/approach Four keywords, namely, sustainability assessment, sustainable manufacturing, TBL and green production, were used to explore and find the relevant articles. First, this paper systematically reviewed the studies and analyzed the different levels and boundaries of sustainability assessment. Following this, the reviewed studies were critically discussed along with their merits and shortcomings. Findings The review showed that most of the sustainability assessment studies were conducted on product, company and process levels in the manufacturing industry. Nevertheless, there is still a need to focus more on plant and process level assessments to achieve the TBL objectives. Environmental assessment is comparatively matured in manufacturing industries. However, from the economic and social viewpoints, only cost analysis and workers’ safety, respectively, were considered in most of the studies. The economic and social indicators need to be more inclusive and should be validated and standardized for manufacturing industries. Originality/value Unlike previous sustainability assessment reviews in manufacturing industries which were mostly based on life cycle assessment, this paper has included environmental, social and economic aspects in one comprehensive review and focused on recent studies published from 2010 to 2017. This paper has explored the recent sustainability assessment trends and provided insights into the development of sustainability assessment in the manufacturing sector.

An Evaluation on Carbon Footprint Indicators in Turkey Located Banks and Worldwide Banks

2019 ◽  
Vol 6 (4) ◽  
pp. 74-95
Author(s):  
Özlem Yurtsever ◽  
Seniye Umit Firat
Keyword(s):  
Carbon Footprint ◽  
Service Sector ◽  
Manufacturing Sector ◽  
Global Climate ◽  
Considerable Influence ◽  
Great Debate ◽  
International Banks ◽  
Critical Issues ◽  
Sustainability Reports ◽  
Operational Activities

Global warming has become one of the most critical issues in the recent years. There is a great debate, centered on greenhouse gas emissions of countries, companies, and institutions. Not only the manufacturing sector but also service sector has begun to be questioned in terms of the need for controlling greenhouse gases. Thus, banks deserve an attention on the basis of sustainability and environmental impact. Besides the operational activities of this enormous sector, its investing and lending choices have considerable influence on sustainability. The carbon footprint measurement indicators have to be standardized in order to estimate the contributions of the banks in the global climate change precisely. In this study, carbon footprint measurement indicators, extracted from the sustainability reports and/or websites of the banks in Turkey are examined. The findings have been comparatively discussed with the measurements used by the international banks and addressed in the literature.

Sign in / Sign up

Export Citation Format

Share Document