Are we on the right track towards improving the quality of test results?

1998 ◽  
Vol 3 (6) ◽  
pp. 222-223
Author(s):  
Jarl Forstén
Keyword(s):  
Test Results ◽  
The Right

scholarly journals Monitoring System of The Temperature for Mini Fish Storage using Internet of Things

2021 ◽  
Vol 324 ◽  
pp. 01011
Author(s):  
Eko Prayetno ◽  
Tonny Suhendra ◽  
Jeremya Lukmanto Saputra
Keyword(s):  
Internet Of Things ◽  
Human Brain ◽  
Monitoring System ◽  
Room Temperature ◽  
High Protein ◽  
Test Results ◽  
Error Level ◽  
The Right ◽  
Monitoring Temperature

Fish is one of the high-protein foods that are very helpful for the development of the human brain. Then, it is necessary to maintain the freshness of the fish for consumption. At this time, fishers and fishmongers preserve the freshness of fish by using Ice in the fish storage. However, it is considered ineffective due to improper ice change time. Therefore, monitoring temperature is very important and helpful to find the right time when replacing the Ice used to ensure the quality of fish. The development of this device uses Arduino ESP32, DHT21 Sensor, Micro SD Module, Internet of Things system, monitoring using Blynk Application and notifications using Telegram App. DHT21 sensor test results obtained a data conformity level (Error Level) of 2%. At the fish storage room temperature, there is the lowest temperature of 10.50 oC and ice temperature conditions in the storage of 0 oC. Therefore, the best state to keep fish fresh that researchers want is 0 oC to 2 oC at ice temperatures or 11.50 oC obtained in testing the time it takes to replace Ice by about 10 hours.

scholarly journals The Multi Attribute Utility Theory (Death) Method In The Decision Of The Distributor Distributor Selection (Metode Multi Attribute Utility Theory (Maut) Dalam Keputusan Pemilihan Distributor Barang)

KOMTEKINFO ◽  
2020 ◽  
Vol 7 (2) ◽  
pp. 84-100
Author(s):  
Ritna Wahyuni ◽  
Sarjon Defit ◽  
Gunadi Widi Nurcahyo
Keyword(s):  
Decision Support ◽  
Utility Theory ◽  
Convenience Store ◽  
Test Results ◽  
Accuracy Rate ◽  
Sales Process ◽  
Multi Attribute Utility Theory ◽  
The Right ◽  
Selection Of

Distributors are intermediaries who distribute products from factories to retailers. While the distributor of goods is the distributor of goods from factories to shops that need these goods. Incorrect selection of distributors can interfere with the sales process at the store. To improve the quality and quality of a store, it requires the best distributor of goods. This study aims to determine the best distributor of goods. The method used is the Multi Attribute Utility Theory (MAUT) of distributor data at the Padang Luar Sundanese Convenience Store. The data processed in this study consisted of a number of distributor data selected by the Multipurpose Store. From some of the distributor data, the Decision Support System is very necessary in the selection of distributors who aim for the selection of appropriate alternative decisions. The selection of distributors uses 15 samples of distributor data and 5 criteria data that are used as the basis for selecting distributors, namely quality of goods, affordable prices, strategic locations, service responses, and giving bonuses. The results of testing on this method obtained an accuracy rate of 86.67% of the right distributors and in accordance with the realization of the UI data. So this research is very suitable in choosing the best distributor. From the test results, it has got the 5 best distributors by assigning a weight of 11.50 to the best distributor, so the criteria set by the All-Round Shop can be used as a reference in the selection of distributors of goods.

scholarly journals Studi Kelayakan Pemilihan Supplier Perlengkapan Dan ATK Menggunakan Metode SAW (Simple Additive Weighting)

2019 ◽  
Vol 3 (2) ◽  
pp. 356
Author(s):  
Juniar Hutagalung
Keyword(s):  
Supplier Selection ◽  
Test Results ◽  
Delivery Time ◽  
Track Record ◽  
Supplier Chain ◽  
Simple Additive Weighting ◽  
The Right ◽  
Office Furniture ◽  
A Company

Office Supplies and Stationery (ATK) are equipment that is often used in offices, companies and organizations, include cabinet filling, perforators, calculators, paper clips, staplers, numerators, guides, flashdisks, paper punches, pens and paper, paper shredder, computers, printers, facsimile machines, photocopiers, archive folders and cash registers, office furniture. Supplier is part of the supplier chain that influences the development of a company. Problems that are often experienced by PT. PLN Engineering such as late arrivals and lack of quality equipment and stationery from suppliers, therefore it needs to be re-ordered or returned to suppliers, so that time is wasted. Storage of data on procurement of equipment and stationery that are still conventional so that it is not effective and efficient in terms of time, cost and energy, let alone supplier selection which is still subjective. The purpose of this study makes it easier for competent parties to make decisions at PT. PLN Engineering in selecting the best supplier to be consistent in maintaining the determined criteria so as to minimize the risk and not disappoint the company. Incorrect supplier selection affects the quality and costs incurred in buying equipment and stationery from suppliers, how to overcome them requires a decision support system (SPK) that is able to accurately select the most suitable supplier. The method of Simple Additive Weighting (SAW) combined with fuzification is the right method for evaluating the best suppliers. The most important criteria are Price of Goods, Quality of Goods, Delivery Time, Location Distance, Goods Packaging, Accuracy of Goods, Flexibility, Track Record. The conclusion of the test results is the SAW method is able to show that the ranking of the best suppliers with the highest value of 0.89 is UD. Bintang Mulia.

scholarly journals The Effect Of Use Various Types Cables Spark Plugs To 108cc Scooter Machine Performance

2021 ◽  
Vol 2 (01) ◽  
pp. 1-6
Author(s):  
Irwansyah Irwansyah ◽  
Muhammad Arsad Al Banjari ◽  
Feddy Wanditya Setiawan
Keyword(s):  
Combustion Chamber ◽  
Business Performance ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Test Results ◽  
Combustion System ◽  
Machine Performance ◽  
Spark Plug ◽  
The Right

Ideally, the combustion system system in the combustion chamber, this is an alarm in order to get the right combustion results and of course will make the motorcycle power with the right fuel consumption too. There are at least 3 (three) important factors that must be met by the combustion system in the combustion motorbike, especially for gasoline-type automatic motorbikes. These three factors include the existence of an ideal fuel and air mixture (good air-fuel mixture), the right timing of business performance in producing spark plug spark quality (good spark) and good combustion chamber (good compression). An air-fuel mixture that can produce a homogeneous mixing of fuel and air. The acquisition of perfect combustion is directly proportional to the quality of a good type of spark plug cable. The ability of the type of spark plug cable must be able to support high electric current processes to produce the ideal spark. In this study, the type of business cable used is the brand that is in the market, namely proteck, extreme, hitachi and standard cable types. Performed variation testing 4 (four) types of spark plug cables. The test results show the best engine performance of a gasoline-fueled automatic motorbike using extreme spark plug cables, with a torque of 5,669 Nm at 7854 rpm and a power of 6,252 hp at 7854 rpm

scholarly journals Analysis of Retention Time and Steam Pressure Variations in the Conditioning Process on the Moisture Content of Feed in the Packaging Process

2021 ◽  
Vol 2 (2) ◽  
pp. 01-16
Author(s):  
Rivai Suhendra F ◽  
Isdaryanto Iskandar
Keyword(s):  
Moisture Content ◽  
Retention Time ◽  
Steam Pressure ◽  
Test Results ◽  
Mixing Process ◽  
Durability Index ◽  
Different Diameters ◽  
The Right ◽  
Pressure Reducing Valve

Pellets are compressed feed, compacted through a mechanical process. Pellets can be molded in the form of lumps and small cylinders with different diameters, lengths, and levels of strength. The right moisture content value will maximize the quality of the pellets and increase the value of the Pellet Durability Index(PDI). Many factors affect the moisture content in the feed such as changing the steam pressure configuration, adding moisture to the mixing process, changing the retention time configuration, and other methods. The method tested was to provide variations on the configuration of retention time and steam pressure on the Pressure Reducing Valve (PRV) which aims to determine the increase in moisture content in the feed. Variations of retention time configuration tested were 50 seconds, 55 seconds, 60 seconds, 65 seconds, 70 seconds with variations in the Steam pressure configuration in the test were 1.4 bar and 1.6 bar. The test results prove that the retention time of 65 seconds with a steam pressure of 1.4 bar is the best configuration with an increase in moisture content of 2.67% with a difference in moisture content of bagging to the mixing of -0.46.

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

ANALYSIS OF REGULATIONS REGARDING THE SETTLEMENT OF ISSUES ON THE REMOVAL AND RECOVERY OF PLANTATIONS IN THE RIGHT-OF-WAY OF PUBLIC ROADS

2020 ◽  
pp. 55-60
Author(s):  
Nataliia Kharytonova ◽  
Olha Mykolaienko ◽  
Tetyana Lozova
Keyword(s):  
Traffic Safety ◽  
Climatic Factors ◽  
Visual Orientation ◽  
Right Of Way ◽  
Adverse Weather ◽  
Overhead Power Lines ◽  
The Right ◽  
Neck Diameter ◽  
Proper Operation

Greening of roads contributes to the protection of roads and their elements from influence of adverse weather and climatic factors; it includes the measures for improvement and landscaping of roads, ensures the protection of roadside areas from transport pollution, provides visual orientation of drivers. The solution of these issues will ensure creation and maintenance of safe and comfortable conditions for travelers. Green plantings in the right-of-way road area include woody, bushy, flower and grass vegetation of natural and artificial origin. For proper operation of public roads and satisfaction of other needs of the industry, there may be the need in removing the greenery. The reason for the removal of greenery in the right-of-way road area may be due to the following factors: construction of the architectural object, widening of the motor road, repair works in the security zone of overhead power lines, water supply, drainage, heating, telecommunications facilities, cutting of hazardous, dry and fautal trees, as well as self-grown and brushwood trees with a root neck diameter not exceeding 5 cm, elimination of the consequences of natural disasters and emergencies. The removal of plantations in the right-of-way area is executed in order to ensure traffic safety conditions and to improve the quality of plantations composition and their protective properties. Nowadays, in Ukraine there is no clear procedure for issuing permits for removing of such plantations. In order to resolve this issue, there is a need in determining the list of regulations in the area of forest resources of Ukraine and, if needed, the list of regulatory acts that have to be improved; to prepare a draft of the regulatory legal act that would establish the procedure of plantations cutting, the methodology of their condition determination, recovery costs determination, the features of cutting. Keywords: plantations, cutting, right-of-way, woodcutting permit, order.

Modifikasi Model Pembelajaran Problem Based Learning (PBL) dengan Strategi Pembelajaran Tugas dan Paksa

2019 ◽  
Vol 2 ◽  
Author(s):  
Tita Mila Mustofani ◽  
Ita Hartinah
Keyword(s):  
Critical Thinking ◽  
Learning Strategies ◽  
Student Motivation ◽  
Problem Based Learning ◽  
Learning Model ◽  
Learning Material ◽  
Task Strategies ◽  
The Right ◽  
Increasing Student Learning

This writing aims to help teachers to increase motivation, activity, creativity, and critical thinking of students in solving problems in class. The way to increase student motivation in learning in class is to choose the right learning model with ongoing learning material. One learning model that increases students' creativity and critical thinking in problem solving is a Problem Based Learning (PBL) learning model. To improve students' insights in order to easily solve problems there is a need to do tasks, if students do not do the task then they must accept the agreed upon consequences when making learning contracts, thus modifying the Problem Based Learning (PBL) learning model with task strategies and forced. The results of the modification of learning with the Problem Based Learning (PBL) learning model through forced and forced strategies are expected to improve the learning process so that students become more disciplined and do not waste time doing assignments. The advantages of modifying the Problem Based Learning (PBL) learning model with task and forced learning strategies are increasing student learning motivation, improving the quality of learning, training students' understanding by giving assignments continuously, teaching discipline to students in order to be accountable for tasks assigned, and reducing laziness in students.

THE VALUE OF LOVE IN THE SYSTEM OF FORMATION OF THE PROFESSIONAL MATURITY OF THE EDUCATOR

2020 ◽  
Vol 1 (10(79)) ◽  
pp. 12-18
Author(s):  
G. Bubyreva
Keyword(s):  
Russian Federation ◽  
The State ◽  
Educational Process ◽  
Wide Range ◽  
The Family ◽  
The Russian Federation ◽  
The Government ◽  
The Individual ◽  
The Right

The existing legislation determines the education as "an integral and focused process of teaching and upbringing, which represents a socially important value and shall be implemented so as to meet the interests of the individual, the family, the society and the state". However, even in this part, the meaning of the notion ‘socially significant benefit is not specified and allows for a wide range of interpretation [2]. Yet the more inconcrete is the answer to the question – "who and how should determine the interests of the individual, the family and even the state?" The national doctrine of education in the Russian Federation, which determined the goals of teaching and upbringing, the ways to attain them by means of the state policy regulating the field of education, the target achievements of the development of the educational system for the period up to 2025, approved by the Decree of the Government of the Russian Federation of October 4, 2000 #751, was abrogated by the Decree of the Government of the Russian Federation of March 29, 2014 #245 [7]. The new doctrine has not been developed so far. The RAE Academician A.B. Khutorsky believes that the absence of the national doctrine of education presents a threat to national security and a violation of the right of citizens to quality education. Accordingly, the teacher has to solve the problem of achieving the harmony of interests of the individual, the family, the society and the government on their own, which, however, judging by the officially published results, is the task that exceeds the abilities of the participants of the educational process.  The particular concern about the results of the patriotic upbringing served as a basis for the legislative initiative of the RF President V. V. Putin, who introduced the project of an amendment to the Law of RF "About Education of the Russian Federation" to the State Duma in 2020, regarding the quality of patriotic upbringing [3]. Patriotism, considered by the President of RF V. V. Putin as the only possible idea to unite the nation is "THE FEELING OF LOVE OF THE MOTHERLAND" and the readiness for every sacrifice and heroic deed for the sake of the interests of your Motherland. However, the practicing educators experience shortfalls in efficient methodologies of patriotic upbringing, which should let them bring up citizens, loving their Motherland more than themselves. The article is dedicated to solution to this problem based on the Value-sense paradigm of upbringing educational dynasty of the Kurbatovs [15].

Evaluation of staff in Healthcare Companies

2020 ◽  
Author(s):  
Troncone Raffaella ◽  
Coda Marco
Keyword(s):  
Social Context ◽  
Evaluation System ◽  
Daily Life ◽  
Good Health ◽  
Rehabilitation Services ◽  
Individual Contribution ◽  
Personnel Evaluation ◽  
Good Evaluation ◽  
The Right

Evaluation is at the basis of any social context where all individuals are simultaneously "evaluated" and "evaluators" in all areas of daily life. The goal of a good evaluation system is to encourage staff to do "Good Health" through the provision of quality prevention, diagnosis, treatment and rehabilitation services. The main reasons that lead to the evaluation of the personnel lie in the inevitable and primary importance of the human resource in achieving the corporate objectives, and by the pressing need for the quality of the service provided to the citizen, as well as the legitimate need of the employee to differentiate, clarifying its specificities and its own individual contribution to the general objectives of the company. In the working context, the "personnel evaluation" assumes a fundamental importance, if managed with the right criteria, in order to make the employee not a simple pawn to move and manage for use and consumption of the organization, but an integral part of the organization itself.

Sign in / Sign up

Export Citation Format

Share Document