scholarly journals Glassy carbon manufacture using rapid photonic curing

2022 ◽  
Author(s):  
Brent de Boode ◽  
Chris Phillips ◽  
Yin Cheung Lau ◽  
Arturas Adomkevicius ◽  
James McGettrick ◽  
...  
Keyword(s):  
Glassy Carbon ◽  
Large Scale ◽  
Surface Defects ◽  
Local Environment ◽  
High Volume ◽  
High Energy ◽  
Carbon Coatings ◽  
Polymer Resin ◽  
Photonic Curing ◽  
Environment Temperature

AbstractPhotonic curing was explored as a rapid method for producing glassy carbon coatings, reducing processing time from ~ 20 h for conventional thermal processing down to ~ 1 min. A resole-type thermoset polymer resin coated on steel foil was used as a precursor, placed in a nitrogen purged container and exposed to high energy light (~ 27 J/cm2 per pulse for up to 20 pulses). Comparison samples were produced at 800 °C using a conventional nitrogen purged thermal route. For both photonic and conventionally produced coatings, Raman spectroscopy and primary peak XPS data showed sp2 bonded carbon, indicative of bulk glassy carbon. This transformation evolved with increasing number of pulses, and therefore amount of energy transferred to the coating. The produced coatings were resilient, highly smooth, with no evidence of surface defects. XPS analysis indicated greater sp3 content at the immediate surface (5–10 nm) for photonic cured carbon compared with thermally cured carbon, likely due to the local environment (temperature, atmosphere) around the surface during conversion. The ability to rapidly manufacture glassy carbon coatings provides new opportunities to expand the window of applications of glassy carbons in coatings towards large-scale high volume applications.

scholarly journals Mechanochemical conversion kinetics of red to black phosphorus and scaling parameters for high volume synthesis

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
Samuel V. Pedersen ◽  
Florent Muramutsa ◽  
Joshua D. Wood ◽  
Chad Husko ◽  
David Estrada ◽  
...  
Keyword(s):  
Large Scale ◽  
Near Infrared ◽  
Kinematic Model ◽  
High Volume ◽  
Optoelectronic Device ◽  
High Energy ◽  
Milling Process ◽  
Black Phosphorus ◽  
Ex Situ ◽  
Kinetics Of

Abstract Adopting black phosphorus (BP) as a material in electronic and optoelectronic device manufacturing requires the development and understanding of a large-scale synthesis technique. To that end, high-energy planetary ball milling is demonstrated as a scalable synthesis route, and the mechanisms and conversion kinetics of the BP phase transformation are investigated. During the milling process, media collisions rapidly compress amorphous red phosphorus (RP) into crystalline, orthorhombic BP flakes, resulting in a conversion yield of ≈90% for ≈5 g of bulk BP powder. Milling conversion kinetics, monitored via ex situ x-ray diffraction, manifest a sigmoidal behavior best described by the Avrami rate model with each impact of sufficient energy (>25 mJ) producing BP nuclei; the process appears to be limited by grain growth. Using a kinematic model for ball trajectories and impact energies, the optimum milling condition is determined to be an impact energy near ≈25 mJ and a milling dose near ≈100 kJ/gram. Photoexcitation of exfoliated BP flakes reveals emission in the near-infrared, indicating the formation of few-layer BP, a promising advance for optoelectronic device applications.

Organic solvent-assisted free-standing Li2MnO3·LiNi1/3Co1/3Mn1/3O2 on 3D graphene as a high energy density cathode

2015 ◽  
Vol 51 (91) ◽  
pp. 16381-16384 ◽  
Author(s):  
Yuelong Xin ◽  
Liya Qi ◽  
Yiwei Zhang ◽  
Zicheng Zuo ◽  
Henghui Zhou ◽  
...  
Keyword(s):  
Energy Density ◽  
Organic Solvent ◽  
Freeze Drying ◽  
Large Scale ◽  
High Energy ◽  
High Energy Density ◽  
Free Standing ◽  
3D Graphene ◽  
Active Particles

A novel organic solvent-assisted freeze-drying pathway, which can effectively protect and uniformly distribute active particles, is developed to fabricate a free-standing Li2MnO3·LiNi1/3Co1/3Mn1/3O2 (LR)/rGO electrode on a large scale.

High energy density aqueous zinc–benzoquinone batteries enabled by carbon cloth with multiple anchoring effects

2021 ◽  
Author(s):  
Zhiqiang Luo ◽  
Silin Zheng ◽  
Shuo Zhao ◽  
Xin Jiao ◽  
Zongshuai Gong ◽  
...  
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Porous Carbon ◽  
Large Scale ◽  
High Energy ◽  
High Energy Density ◽  
Carbon Cloth ◽  
Anchoring Effects ◽  
High Theoretical Capacity ◽  
Energy Storage Applications

Benzoquinone with high theoretical capacity is anchored on N-plasma engraved porous carbon as a desirable cathode for rechargeable aqueous Zn-ion batteries. Such batteries display tremendous potential in large-scale energy storage applications.

scholarly journals 1.5 °C degrowth scenarios suggest the need for new mitigation pathways

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Lorenz T. Keyßer ◽  
Manfred Lenzen
Keyword(s):  
Technological Change ◽  
High Speed ◽  
Large Scale ◽  
High Energy ◽  
Climate Mitigation ◽  
Intergovernmental Panel ◽  
Economic Output ◽  
Integrated Assessment Modelling ◽  
Negative Emissions ◽  
Energy Emissions

Abstract1.5  °C scenarios reported by the Intergovernmental Panel on Climate Change (IPCC) rely on combinations of controversial negative emissions and unprecedented technological change, while assuming continued growth in gross domestic product (GDP). Thus far, the integrated assessment modelling community and the IPCC have neglected to consider degrowth scenarios, where economic output declines due to stringent climate mitigation. Hence, their potential to avoid reliance on negative emissions and speculative rates of technological change remains unexplored. As a first step to address this gap, this paper compares 1.5  °C degrowth scenarios with IPCC archetype scenarios, using a simplified quantitative representation of the fuel-energy-emissions nexus. Here we find that the degrowth scenarios minimize many key risks for feasibility and sustainability compared to technology-driven pathways, such as the reliance on high energy-GDP decoupling, large-scale carbon dioxide removal and large-scale and high-speed renewable energy transformation. However, substantial challenges remain regarding political feasibility. Nevertheless, degrowth pathways should be thoroughly considered.

scholarly journals Nitrogen-enriched graphene framework from a large-scale magnesiothermic conversion of CO2 with synergistic kinetics for high-power lithium-ion capacitors

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Chen Li ◽  
Xiong Zhang ◽  
Kai Wang ◽  
Xianzhong Sun ◽  
Yanan Xu ◽  
...  
Keyword(s):  
Energy Density ◽  
High Power ◽  
Power Output ◽  
Large Scale ◽  
Electrode Materials ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Chemical Doping ◽  
Lithium Ion Capacitor

AbstractLithium-ion capacitors are envisaged as promising energy-storage devices to simultaneously achieve a large energy density and high-power output at quick charge and discharge rates. However, the mismatched kinetics between capacitive cathodes and faradaic anodes still hinder their practical application for high-power purposes. To tackle this problem, the electron and ion transport of both electrodes should be substantially improved by targeted structural design and controllable chemical doping. Herein, nitrogen-enriched graphene frameworks are prepared via a large-scale and ultrafast magnesiothermic combustion synthesis using CO2 and melamine as precursors, which exhibit a crosslinked porous structure, abundant functional groups and high electrical conductivity (10524 S m−1). The material essentially delivers upgraded kinetics due to enhanced ion diffusion and electron transport. Excellent capacities of 1361 mA h g−1 and 827 mA h g−1 can be achieved at current densities of 0.1 A g−1 and 3 A g−1, respectively, demonstrating its outstanding lithium storage performance at both low and high rates. Moreover, the lithium-ion capacitor based on these nitrogen-enriched graphene frameworks displays a high energy density of 151 Wh kg−1, and still retains 86 Wh kg−1 even at an ultrahigh power output of 49 kW kg−1. This study reveals an effective pathway to achieve synergistic kinetics in carbon electrode materials for achieving high-power lithium-ion capacitors.

scholarly journals Modeling Gamma-Ray SEDs and Angular Extensions of Extreme TeV Blazars from Intergalactic Proton-Initiated Cascades in Contemporary Astrophysical EGMF Models

Universe ◽  
2021 ◽  
Vol 7 (7) ◽  
pp. 220
Author(s):  
Emil Khalikov
Keyword(s):  
Gamma Rays ◽  
Large Scale ◽  
Gamma Ray ◽  
High Energy ◽  
Cascade Model ◽  
Point Sources ◽  
Spectral Energy ◽  
Observation Data ◽  
Cherenkov Telescopes ◽  
The Universe

The intrinsic spectra of some distant blazars known as “extreme TeV blazars” have shown a hint at an anomalous hardening in the TeV energy region. Several extragalactic propagation models have been proposed to explain this possible excess transparency of the Universe to gamma-rays starting from a model which assumes the existence of so-called axion-like particles (ALPs) and the new process of gamma-ALP oscillations. Alternative models suppose that some of the observable gamma-rays are produced in the intergalactic cascades. This work focuses on investigating the spectral and angular features of one of the cascade models, the Intergalactic Hadronic Cascade Model (IHCM) in the contemporary astrophysical models of Extragalactic Magnetic Field (EGMF). For IHCM, EGMF largely determines the deflection of primary cosmic rays and electrons of intergalactic cascades and, thus, is of vital importance. Contemporary Hackstein models are considered in this paper and compared to the model of Dolag. The models assumed are based on simulations of the local part of large-scale structure of the Universe and differ in the assumptions for the seed field. This work provides spectral energy distributions (SEDs) and angular extensions of two extreme TeV blazars, 1ES 0229+200 and 1ES 0414+009. It is demonstrated that observable SEDs inside a typical point spread function of imaging atmospheric Cherenkov telescopes (IACTs) for IHCM would exhibit a characteristic high-energy attenuation compared to the ones obtained in hadronic models that do not consider EGMF, which makes it possible to distinguish among these models. At the same time, the spectra for IHCM models would have longer high energy tails than some available spectra for the ALP models and the universal spectra for the Electromagnetic Cascade Model (ECM). The analysis of the IHCM observable angular extensions shows that the sources would likely be identified by most IACTs not as point sources but rather as extended ones. These spectra could later be compared with future observation data of such instruments as Cherenkov Telescope Array (CTA) and LHAASO.

scholarly journals Understanding the origin of the positron annihilation line and the physics of supernova explosions

2021 ◽  
Author(s):  
F. Frontera ◽  
E. Virgilli ◽  
C. Guidorzi ◽  
P. Rosati ◽  
R. Diehl ◽  
...  
Keyword(s):  
Positron Annihilation ◽  
Large Scale ◽  
Gamma Ray ◽  
Nuclear Astrophysics ◽  
High Energy ◽  
Radioactive Isotopes ◽  
Fusion Reactions ◽  
Dark Matter Annihilation ◽  
Annihilation Line ◽  
Supernova Explosions

AbstractNuclear astrophysics, and particularly nuclear emission line diagnostics from a variety of cosmic sites, has remained one of the least developed fields in experimental astronomy, despite its central role in addressing a number of outstanding questions in modern astrophysics. Radioactive isotopes are co-produced with stable isotopes in the fusion reactions of nucleosynthesis in supernova explosions and other violent events, such as neutron star mergers. The origin of the 511 keV positron annihilation line observed in the direction of the Galactic Center is a 50-year-long mystery. In fact, we still do not understand whether its diffuse large-scale emission is entirely due to a population of discrete sources, which are unresolved with current poor angular resolution instruments at these energies, or whether dark matter annihilation could contribute to it. From the results obtained in the pioneering decades of this experimentally-challenging window, it has become clear that some of the most pressing issues in high-energy astrophysics and astro-particle physics would greatly benefit from significant progress in the observational capabilities in the keV-to-MeV energy band. Current instrumentation is in fact not sensitive enough to detect radioactive and annihilation lines from a wide variety of phenomena in our and nearby galaxies, let alone study the spatial distribution of their emission. In this White Paper (WP), we discuss how unprecedented studies in this field will become possible with a new low-energy gamma-ray space experiment, called ASTENA (Advanced Surveyor of Transient Events and Nuclear Astrophysics), which combines new imaging, spectroscopic and polarization capabilities. In a separate WP (Guidorzi et al. 39), we discuss how the same mission concept will enable new groundbreaking studies of the physics of Gamma–Ray Bursts and other high-energy transient phenomena over the next decades.

scholarly journals 1068. Large-Scale Migration and the Changing Viral Hepatitis Prevalences in North America: A modeling approach

2020 ◽  
Vol 7 (Supplement_1) ◽  
pp. S563-S563
Author(s):  
Kenneth A Valles ◽  
Lewis R Roberts
Keyword(s):  
United States ◽  
Viral Hepatitis ◽  
Large Scale ◽  
Country Of Origin ◽  
Human Movement ◽  
High Volume ◽  
The United States ◽  
The Philippines ◽  
Outcome Data ◽  
Treatment Programs

Abstract Background Infection by hepatitis B and C viruses causes inflammation of the liver and can lead to cirrhosis, liver failure, and hepatocellular carcinoma. The WHO’s ambition to eliminate viral hepatitis by 2030 requires strategies specific to the dynamic disease profiles each nation faces. Large-scale human movement from high-prevalence nations to the United States and Canada have altered the disease landscape, likely warranting adjustments to present elimination approaches. However, the nature and magnitude of the new disease burden remains unknown. This study aims to generate a modeled estimate of recent HBV and HCV prevalence changes to the United States and Canada due to migration. Methods Total migrant populations from 2010-2019 were obtained from United Nations Migrant Stock database. Country-of-origin HBV and HCV prevalences were obtained for the select 40 country-of-origin nations from the Polaris Observatory and systematic reviews. A standard pivot table was used to evaluate the disease contribution from and to each nation. Disease progression estimates were generated using the American Association for the Study of the Liver guidelines and outcome data. Results Between 2010 and 2019, 7,676,937 documented migrants arrived in US and Canada from the selected high-volume nations. Primary migrant source regions were East Asia and Latin America. Combined, an estimated 878,995 migrants were HBV positive, and 226,428 HCV positive. The majority of both migrants (6,477,506) and new viral hepatitis cases (HBV=840,315 and HCV=215,359) were found in the United States. The largest source of HBV cases stemmed from the Philippines, and HCV cases from El Salvador. Conclusion Massive human movement has significantly changed HBV and HCV disease burdens in both the US and Canada over the past decade and the long-term outcomes of cirrhosis and HCC are also expected to increase. These increases are likely to disproportionally impact individuals of the migrant and refugee communities and screening and treatment programs must be strategically adjusted in order to reduce morbidity, mortality, and healthcare expenses. Disclosures All Authors: No reported disclosures

scholarly journals Study on the High-Speed Milling Performance of High-Volume Fraction SiCp/Al Composites

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4143
Author(s):  
Youzheng Cui ◽  
Shenrou Gao ◽  
Fengjuan Wang ◽  
Qingming Hu ◽  
Cheng Xu ◽  
...  
Keyword(s):  
High Speed ◽  
Large Scale ◽  
Volume Fraction ◽  
Simulation Analysis ◽  
Cutting Temperature ◽  
High Volume ◽  
Cutting Parameters ◽  
High Volume Fraction ◽  
High Wear Resistance ◽  
Element Analysis

Compared with other materials, high-volume fraction aluminum-based silicon carbide composites (hereinafter referred to as SiCp/Al) have many advantages, including high strength, small change in the expansion coefficient due to temperature, high wear resistance, high corrosion resistance, high fatigue resistance, low density, good dimensional stability, and thermal conductivity. SiCp/Al composites have been widely used in aerospace, ordnance, transportation service, precision instruments, and in many other fields. In this study, the ABAQUS/explicit large-scale finite element analysis platform was used to simulate the milling process of SiCp/Al composites. By changing the parameters of the tool angle, milling depth, and milling speed, the influence of these parameters on the cutting force, cutting temperature, cutting stress, and cutting chips was studied. Optimization of the parameters was based on the above change rules to obtain the best processing combination of parameters. Then, the causes of surface machining defects, such as deep pits, shallow pits, and bulges, were simulated and discussed. Finally, the best cutting parameters obtained through simulation analysis was the tool rake angle γ0 = 5°, tool clearance angle α0 = 5°, corner radius r = 0.4 mm, milling depth ap = 50 mm, and milling speed vc= 300 m/min. The optimal combination of milling parameters provides a theoretical basis for subsequent cutting.

Advances in Water Treatment Application of Sepiolite Mineral Materials

2013 ◽  
Vol 710 ◽  
pp. 217-220 ◽  
Author(s):  
Fei Wang ◽  
Lei Feng ◽  
Meng Ran Tang ◽  
Ji Yuan Li ◽  
Qing Guo Tang
Keyword(s):  
Water Treatment ◽  
Size Effect ◽  
Large Scale ◽  
Surface Effect ◽  
Development Trend ◽  
High Energy ◽  
Research Area ◽  
Group Mineral ◽  
Active Research ◽  
Treatment Application

Synthetic nanomaterials have the disadvantages of large-scale investment, high energy consumption, complex production process and heavy environmental load. Mineral nanomaterials such as sepiolite group mineral nanomaterials are characterized by small size effect, quantum size effect and surface effect. Water treatment application of sepiolite group mineral nanomaterials has become an active research area and showed good development and application prospects. Based on the above reasons, this paper systematically summarizes the water treatment application of sepiolite group mineral nanomaterials, and development trend related to water treatment application of sepiolite group mineral nanomaterials were also proposed.

Sign in / Sign up

Export Citation Format

Share Document