The relationship between head-space volume and dissolved O2 content of water and UHT milk in sealed containers

SummaryA relationship between the level of dissolved O2 in a product and the head-space volume of a sealed container after filling was derived. The validity of the relationship was confirmed by studies using both water and milk which had been subjected to ultra heat treatment (UHT), and stored in glass bottles. The relation held well for water, but some deviation was noted using milk. The relationship allowed selection of the processing conditions necessary for the manufacture of products with a desired dissolved O2 level.As part of this study a device was developed which permits continuous monitoring of dissolved O2 in sterile liquids being pumped between a container and an O2 sensor. Only very minor problems were encountered with the device through biological contamination or entry of atmospheric O2.

Download Full-text

Fabrication of Porous Polyethylene by Two-Stepped Heat Treatment and Powder Printing Technique

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.93-94.165 ◽

2010 ◽

Vol 93-94 ◽

pp. 165-168 ◽

Cited By ~ 3

Author(s):

Jintamai Suwanprateeb ◽

Kitiya Wasoontararat ◽

Waraporn Suvannapruk

Keyword(s):

Mechanical Properties ◽

Heat Treatment ◽

High Density Polyethylene ◽

Physical And Mechanical Properties ◽

High Density ◽

Processing Conditions ◽

Structure And Properties ◽

Porous Polyethylene ◽

Printing Technique ◽

The Relationship

In this study, a combination of powder printing technique and two-stepped heat treatment was utilized as a mean to prepare porous high density polyethylene structure. Physical and mechanical properties of the resulting structure were then characterized by porosity measurement and monotonic tensile test. It was found that the relationship between structure and properties was strongly influenced by processing conditions including compositions, treatment times and treatment temperatures. This process could increase the properties of porous high density polyethylene significantly over the single-stepped heat treatment without destroying porous structure. Porous high density polyethylene bodies having a porosity ranging from 46-58 percents with tensile strength up to approximately 4 MPa could be successfully prepared in this study.

Download Full-text

IMPROVEMENT OF SPRING DURUM WHEAT SELECTION METHODOLOGIES UNDER CLIMATE CHANGE CONDITIONS

Vestnik of the Russian agricultural science ◽

10.30850/vrsn/2019/3/33-36 ◽

1970 ◽

pp. 33-36

Author(s):

А. I. Grabovets ◽

V. P. Kadushkina ◽

S. А. Kovalenko

Keyword(s):

Grain Yield ◽

Durum Wheat ◽

Correlation Coefficient ◽

Harvest Index ◽

Unit Area ◽

Correlation Coefficients ◽

Chemical Mutagenesis ◽

Main Method ◽

The Relationship ◽

Selection Of

With the growing aridity of the climate on the Don, it became necessary to improve the methodology for conducting the breeding of spring durum wheat. The main method of obtaining the source material remains intraspecific step hybridization. Crossings were performed between genetically distant forms, differing in origin and required traits and properties. The use of chemical mutagenesis was a productive way to change the heredity of genotypes in terms of drought tolerance. When breeding for productivity, both in dry years of research and in favorable years, the most objective markers were identified — the size of the aerial mass, the mass of grain per plant, spike, and harvest index. The magnitude of the correlation coefficients between the yield per unit area and the elements of its structure is established. It was most closely associated with them in dry years, while in wet years it decreased. Power the correlation of the characteristics of the pair - the grain yield per square meter - the aboveground biomass averaged r = 0.73, and in dry years it was higher (0.91) than in favorable ones (0.61 - 0.70) , between the harvest and the harvest index - r = 0.81 (on average). In dry years, the correlation coefficient increased to 0.92. Research data confirms the greatest importance of the mass of grain from one ear and the plant in the formation of grain yield per unit area in both dry and wet years. In dry years, the correlation coefficient between yield and grain mass per plant was on average r = 0.80; in favorable years, r = 0.69. The relationship between yield and grain mass from the ear was greater — r = 0.84 and r = 0.82, respectively. Consequently, the breeding significance of the aboveground mass and the productivity of the ear, as a criterion for the selection of the crop, especially increases in the dry years. They were basic in the selection.

Download Full-text

BÖHLER W403 VMR

Alloy Digest ◽

10.31399/asm.ad.ts0721 ◽

2013 ◽

Vol 62 (9) ◽

Keyword(s):

Heat Treatment ◽

Chemical Composition ◽

Physical Properties ◽

Tool Steel ◽

Raw Materials ◽

Heat Treating ◽

Diffusion Annealing ◽

Selection Of

Abstract Böhler (or Boehler) W403 VMR is a tool steel with outstanding properties, based not only on a modified chemical composition, but on the selection of highly clean raw materials for melting, remelting under vacuum (VMF), optimized diffusion annealing, and a special heat treatment. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-721. Producer or source: Böhler Edelstahl GmbH.

Download Full-text

Analisa Pemilihan Moda Transportasi Umum Rute Tanjung Karang – Bandara Radin Inten II Dengan Stated Preference dan Uji Crame’s V

Borneo Engineering : Jurnal Teknik Sipil ◽

10.35334/be.v2i2.621 ◽

2018 ◽

Vol 2 (2) ◽

pp. 137

Author(s):

Muhammad Abi Berkah Nadi

Keyword(s):

Regression Analysis ◽

Utility Function ◽

Stated Preference ◽

Technical Analysis ◽

Chi Square ◽

Time Headway ◽

Independent Variable ◽

The Relationship ◽

Selection Of

Radin Inten II Airport is a national flight in Lampung Province. In this study using the technical analysis stated preference which is the approach by conveying the choice statement in the form of hypotheses to be assessed by the respondent. By using these techniques the researcher can fully control the hypothesized factors. To determine utility function for model forecasting in fulfilling request of traveler is used regression analysis with SPSS program. The analysis results obtained that the passengers of the dominant airport in the selection of modes of cost attributes than on other attributes. From the result of regression analysis, the influence of independent variable to the highest dependent variable is when the five attributes are used together with the R square value of 8.8%. The relationship between cost, time, headway, time acces and service with the selection of modes, the provision that states whether or not there is a decision. The significance of α = 0.05 with chi-square. And the result of Crame's V test average of 0.298 is around the middle, then the relationship is moderate enough.

Download Full-text

A Biomarker Combining Imaging and Neuropsychological Assessment for Tracking Early Alzheimer's Disease in Clinical Trials

Current Alzheimer Research ◽

10.2174/1567205014666171106150309 ◽

2018 ◽

Vol 15 (5) ◽

pp. 429-442 ◽

Cited By ~ 3

Author(s):

Nishant Verma ◽

S. Natasha Beretvas ◽

Belen Pascual ◽

Joseph C. Masdeu ◽

Mia K. Markey ◽

...

Keyword(s):

Alzheimer’S Disease ◽

Alzheimer's Disease ◽

Clinical Trials ◽

Cognitive Impairment ◽

Latent Variable ◽

Brain Regions ◽

Disease Assessment ◽

Latent Variable Analysis ◽

The Relationship ◽

Selection Of

Background: Combining optimized cognitive (Alzheimer's Disease Assessment Scale- Cognitive subscale, ADAS-Cog) and atrophy markers of Alzheimer's disease for tracking progression in clinical trials may provide greater sensitivity than currently used methods, which have yielded negative results in multiple recent trials. Furthermore, it is critical to clarify the relationship among the subcomponents yielded by cognitive and imaging testing, to address the symptomatic and anatomical variability of Alzheimer's disease. Method: Using latent variable analysis, we thoroughly investigated the relationship between cognitive impairment, as assessed on the ADAS-Cog, and cerebral atrophy. A biomarker was developed for Alzheimer's clinical trials that combines cognitive and atrophy markers. Results: Atrophy within specific brain regions was found to be closely related with impairment in cognitive domains of memory, language, and praxis. The proposed biomarker showed significantly better sensitivity in tracking progression of cognitive impairment than the ADAS-Cog in simulated trials and a real world problem. The biomarker also improved the selection of MCI patients (78.8±4.9% specificity at 80% sensitivity) that will evolve to Alzheimer's disease for clinical trials. Conclusion: The proposed biomarker provides a boost to the efficacy of clinical trials focused in the mild cognitive impairment (MCI) stage by significantly improving the sensitivity to detect treatment effects and improving the selection of MCI patients that will evolve to Alzheimer’s disease.

Download Full-text

Excessive Belching: a Separate Syndrome or Another Symptom of Functional Dyspepsia?

Russian Journal of Gastroenterology Hepatology Coloproctology ◽

10.22416/1382-4376-2020-30-3-55-60 ◽

2020 ◽

Vol 30 (3) ◽

pp. 55-60 ◽

Cited By ~ 1

Author(s):

A. A. Sheptulin ◽

O. A. Storonova

Keyword(s):

Functional Dyspepsia ◽

Functional Gastrointestinal Disorders ◽

High Resolution Manometry ◽

Published Evidence ◽

Key Points ◽

Dyspeptic Symptoms ◽

The Relationship ◽

Rome Iv ◽

Selection Of ◽

Optimal Treatment Strategy

Aim of review. Interpretation of published evidence on the relationship between the excessive belching syndrome and functional dyspepsia (FD) and their management in patient care.Key points. According to the Rome IV criteria of functional gastrointestinal disorders (FGID), excessive belching in the absence of other dyspeptic symptoms is to be considered a manifestation of the excessive belching syndrome, which can be of gastric or supragastric nature. Combination of high-resolution manometry and impedancemetry allows an accurate diagnosis of belching and selection of optimal treatment strategy. Belching complicated by other symptoms of dyspepsia is to be considered yet another FD symptom according to the Rome IV criteria of FGID. Prokinetics are recommended to relieve belching in such cases.Conclusion. Understanding the relationship between the excessive belching syndrome and FD requires further research.

Download Full-text

The Impact of Alkaloid-Producing Epichloë Endophyte on Forage Ryegrass Breeding: A New Zealand Perspective

Toxins ◽

10.3390/toxins13020158 ◽

2021 ◽

Vol 13 (2) ◽

pp. 158

Author(s):

Colin Eady

Keyword(s):

Seed Production ◽

Health Issues ◽

Abiotic Stressors ◽

Livestock Health ◽

The Right ◽

The Impact ◽

The Relationship ◽

And Storage ◽

Selection Of ◽

Epichloë Endophyte

For 30 years, forage ryegrass breeding has known that the germplasm may contain a maternally inherited symbiotic Epichloë endophyte. These endophytes produce a suite of secondary alkaloid compounds, dependent upon strain. Many produce ergot and other alkaloids, which are associated with both insect deterrence and livestock health issues. The levels of alkaloids and other endophyte characteristics are influenced by strain, host germplasm, and environmental conditions. Some strains in the right host germplasm can confer an advantage over biotic and abiotic stressors, thus acting as a maternally inherited desirable ‘trait’. Through seed production, these mutualistic endophytes do not transmit into 100% of the crop seed and are less vigorous than the grass seed itself. This causes stability and longevity issues for seed production and storage should the ‘trait’ be desired in the germplasm. This makes understanding the precise nature of the relationship vitally important to the plant breeder. These Epichloë endophytes cannot be ‘bred’ in the conventional sense, as they are asexual. Instead, the breeder may modulate endophyte characteristics through selection of host germplasm, a sort of breeding by proxy. This article explores, from a forage seed company perspective, the issues that endophyte characteristics and breeding them by proxy have on ryegrass breeding, and outlines the methods used to assess the ‘trait’, and the application of these through the breeding, production, and deployment processes. Finally, this article investigates opportunities for enhancing the utilisation of alkaloid-producing endophytes within pastures, with a focus on balancing alkaloid levels to further enhance pest deterrence and improving livestock outcomes.

Download Full-text

Domain randomization-enhanced deep learning models for bird detection

Scientific Reports ◽

10.1038/s41598-020-80101-x ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

Xin Mao ◽

Jun Kang Chow ◽

Pin Siang Tan ◽

Kuan-fu Liu ◽

Jimmy Wu ◽

...

Keyword(s):

Deep Learning ◽

Continuous Monitoring ◽

Bird Species ◽

Training Data ◽

Learning Models ◽

Fine Grained ◽

Bird Detection ◽

Relationship Of ◽

The Relationship

AbstractAutomatic bird detection in ornithological analyses is limited by the accuracy of existing models, due to the lack of training data and the difficulties in extracting the fine-grained features required to distinguish bird species. Here we apply the domain randomization strategy to enhance the accuracy of the deep learning models in bird detection. Trained with virtual birds of sufficient variations in different environments, the model tends to focus on the fine-grained features of birds and achieves higher accuracies. Based on the 100 terabytes of 2-month continuous monitoring data of egrets, our results cover the findings using conventional manual observations, e.g., vertical stratification of egrets according to body size, and also open up opportunities of long-term bird surveys requiring intensive monitoring that is impractical using conventional methods, e.g., the weather influences on egrets, and the relationship of the migration schedules between the great egrets and little egrets.

Download Full-text

Selection of Materials and Sensors for Health Monitoring of Composite Structures

MRS Proceedings ◽

10.1557/proc-785-d11.1 ◽

2003 ◽

Vol 785 ◽

Cited By ~ 5

Author(s):

Seth S. Kessler ◽

S. Mark Spearing

Keyword(s):

Health Monitoring ◽

Lamb Wave ◽

Composite Structures ◽

Structural Damage ◽

Performance Metrics ◽

Full Range ◽

Transportation Systems ◽

Health Monitoring Systems ◽

The Relationship ◽

Selection Of

ABSTRACTEmbedded structural health monitoring systems are envisioned to be an important component of future transportation systems. One of the key challenges in designing an SHM system is the choice of sensors, and a sensor layout, which can detect unambiguously relevant structural damage. This paper focuses on the relationship between sensors, the materials of which they are made, and their ability to detect structural damage. Sensor selection maps have been produced which plot the capabilities of the full range of available sensor types vs. the key performance metrics (power consumption, resolution, range, sensor size, coverage). This exercise resulted in the identification of piezoceramic Lamb wave transducers as the sensor of choice. Experimental results are presented for the detailed selection of piezoceramic materials to be used as Lamb wave transducers.

Download Full-text