Experimental Study of High-Performance Deicing Asphalt Mixture for Mechanical Performance and Anti-Icing Effectiveness

2018 ◽  
Vol 30 (8) ◽  
pp. 04018180 ◽  
Author(s):  
Tao Ma ◽  
Xunhao Ding ◽  
Hao Wang ◽  
Weiguang Zhang
Keyword(s):  
Experimental Study ◽  
High Performance ◽  
Mechanical Performance ◽  
Asphalt Mixture

Experimental Study on the Anti-Cracking Performance for Geosynthetics Overlay

2013 ◽  
Vol 838-841 ◽  
pp. 1295-1298
Author(s):  
Ya Zhen Sun ◽  
Li Bao Wang ◽  
Bao Yang Yu
Keyword(s):  
Experimental Study ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Fatigue Test ◽  
Mechanical Performance ◽  
Asphalt Mixture ◽  
Bituminous Mixture ◽  
Bituminous Mixtures ◽  
Cracking Performance

In order to study anti-cracking performance for geosynthetics, the splitting and fatigue test of bituminous mixtures with geosynthetics and without geosythetics are carried out. The mechanical performance for tensile strength and elastic modulus of asphalt mixture are obtained through two tests. The tensile strength and elastic modulus of bituminous mixture are increased by 14.9% and 54.9% respectively. Through adding the geosynthetics overlay to achieve the purpose of retarding the development of cracks in the pavement.

scholarly journals A Review of Nanomaterials’ Effect on Mechanical Performance and Aging of Asphalt Mixtures

2019 ◽  
Vol 9 (18) ◽  
pp. 3657 ◽  
Author(s):  
João Crucho ◽  
Luís Picado-Santos ◽  
José Neves ◽  
Silvino Capitão
Keyword(s):  
High Performance ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Economic Feasibility ◽  
Asphalt Binders ◽  
Aging Resistance ◽  
Marshall Stability

This review addresses the effects of the modifications with nanomaterials, particularly nanosilica, nanoclays, and nanoiron, on the mechanical performance and aging resistance of asphalt mixtures. The desire for high-performance and long-lasting asphalt pavements significantly pushed the modification of the conventional paving asphalt binders. To cope with such demand, the use of nanomaterials for the asphalt binder modification seems promising, as with a small amount of modification an important enhancement of the asphalt mixture mechanical performance can be attained. Several studies already evaluated the effects of the modifications with nanomaterials, mostly focusing on the asphalt binder properties and rheology, and the positive findings encouraged the study of modified asphalt mixtures. This review focuses on the effects attained in the mechanical properties of the asphalt mixtures, under fresh and aged conditions. Generally, the effects of each nanomaterial were evaluated with the current state-of-art tests for the characterization of mechanical performance of asphalt mixtures, such as, permanent deformation, stiffness modulus, fatigue resistance, indirect tensile strength, and Marshall stability. Aging indicators, as the aging sensitivity, were used to evaluate the effects in the asphalt mixture’s aging resistance. Finally, to present a better insight into the economic feasibility of the analyzed nanomaterials, a simple cost analysis is performed.

scholarly journals Polymer/Iron-Based Layered Double Hydroxides as Multifunctional Wound Dressings

Pharmaceutics ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 1130
Author(s):  
Mariana Pires Figueiredo ◽  
Ana Borrego-Sánchez ◽  
Fátima García-Villén ◽  
Dalila Miele ◽  
Silvia Rossi ◽  
...  
Keyword(s):  
Drug Release ◽  
High Performance ◽  
Mechanical Performance ◽  
Release Kinetics ◽  
Wound Dressings ◽  
In Vitro Drug Release ◽  
Improved Performance ◽  
Double Hydroxide ◽  
Double Hydroxides

This work presents the development of multifunctional therapeutic membranes based on a high-performance block copolymer scaffold formed by polyether (PE) and polyamide (PA) units (known as PEBA) and layered double hydroxide (LDH) biomaterials, with the aim to study their uses as wound dressings. Two LDH layer compositions were employed containing Mg2+ or Zn2+, Fe3+ and Al3+ cations, intercalated with chloride anions, abbreviated as Mg-Cl or Zn-Cl, or intercalated with naproxenate (NAP) anions, abbreviated as Mg-NAP or Zn-NAP. Membranes were structurally and physically characterized, and the in vitro drug release kinetics and cytotoxicity assessed. PEBA-loading NaNAP salt particles were also prepared for comparison. Intercalated NAP anions improved LDH–polymer interaction, resulting in membranes with greater mechanical performance compared to the polymer only or to the membranes containing the Cl-LDHs. Drug release (in saline solution) was sustained for at least 8 h for all samples and release kinetics could be modulated: a slower, an intermediate and a faster NAP release were observed from membranes containing Zn-NAP, NaNAP and Mg-NAP particles, respectively. In general, cell viability was higher in the presence of Mg-LDH and the membranes presented improved performance in comparison with the powdered samples. PEBA containing Mg-NAP sample stood out among all membranes in all the evaluated aspects, thus being considered a great candidate for application as multifunctional therapeutic dressings.

scholarly journals Durability Study on High-Performance Fiber-Reinforced Mortar under Simulated Wastewater Pipeline Environment

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3781
Author(s):  
Tianyu Wang ◽  
Yahong Zhao ◽  
Baosong Ma ◽  
Cong Zeng
Keyword(s):  
Mass Loss ◽  
Pore Volume ◽  
High Performance ◽  
Mechanical Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Economic Losses ◽  
Structural Deterioration ◽  
Simulated Wastewater ◽  
Corrosive Environments

The acid–alkaline-inducd corrosive environments inside wastewater concrete pipelines cause concrete structural deterioration and substantial economic losses all over the world. High-performance concrete/mortar (HPC) was designed to have better resistance to corrosive environments, with enhanced service life. However, the durability of HPC in wastewater pipeline environments has rarely been studied. A high-performance mortar mixture (M) reinforced by supplemental materials (including fly ash and silica fume) and polyvinyl alcohol (PVA) fibers, together with a mortar mixture (P) consisting of cement, sand and water with similar mechanical performance, were both designed and exposed to simulated wastewater pipeline environments. The visual appearance, dimensional variation, mass loss, mechanical properties, permeable pore volume, and microstructure of the specimens were measured during the corrosion cycles. More severe deterioration was observed when the alkaline environment was introduced into the corrosion cycles. Test results showed that the M specimens had less permeable pore volume, better dimensional stability, and denser microstructure than the P specimens under acid–alkaline-induced corrosive environments. The mass-loss rates of the M specimens were 66.1–77.2% of the P specimens after 12 corrosion cycles. The compressive strength of the M specimens was 25.5–37.3% higher than the P specimens after 12 cycles under corrosive environments. Hence, the high-performance mortar examined in this study was considered superior to traditional cementitious materials for wastewater pipeline construction and rehabilitation.

scholarly journals MECHANICAL PERFORMANCE OF ASPHALT MIXTURE CONTAINING CUP LUMP RUBBER

2019 ◽  
Vol 81 (6) ◽  
Author(s):  
Norfazira Mohd Azahar ◽  
Norhidayah Abdul Hassan ◽  
Ramadhansyah Putra Jaya ◽  
Hasanan Md. Nor ◽  
Mohd Khairul Idham Mohd Satar ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Resilient Modulus ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Dynamic Creep ◽  
Aging Conditions ◽  
Public Work Department ◽  
Indirect Tensile

The use of cup lump rubber as an additive in asphalt binder has recently become the main interest of the paving industry. The innovation helps to increase the natural rubber consumption and stabilize the rubber price. This study evaluates the mechanical performance of cup lump rubber modified asphalt (CMA) mixture in terms of resilient modulus, dynamic creep and indirect tensile strength under aging conditions. The CMA mixture was prepared using dense-graded Marshall-designed mix and the observed behavior was compared with that of conventional mixture. From the results, both mixtures passed the volumetric properties as accordance to Malaysian Public Work Department (PWD) specification. The addition of cup lump rubber provides better resistance against permanent deformation through the enhanced properties of resilient modulus and dynamic creep. Furthermore, the resilient modulus of CMA mixture performed better under aging conditions.  

Rutting Treatment Technology of Asphalt Pavement of Abrupt Slope Section in Heavy Load and High Temperature Zone

2011 ◽  
Vol 287-290 ◽  
pp. 858-861
Author(s):  
Hui Wang ◽  
Zhou Qing Zhao ◽  
Jian Zeng
Keyword(s):  
High Temperature ◽  
High Performance ◽  
Polyester Fibre ◽  
Asphalt Mixture ◽  
Good Control ◽  
Treatment Technology ◽  
Heavy Load ◽  
Test Road ◽  
Overlay Design ◽  
New Material

Aiming at the characteristics of pavement rutting damage of test road under the condition of heavy load and abrupt slope, an overlay design scheme and a new overlay material with high performance was proposed. The new material is PG82 modified asphalt SMA-13 added polyester fibre which can significantly improve the high temperature performance of asphalt mixture under severe environment, and its strength and crack resistance are superior to normal SMA-13. Tracking survey of test road shows that the pavement performances keeps good and rutting is under good control. Therefore those measurements are successful and can be a reference to similar projects.

Test and Study on Green High-Performance Marine Concrete Containing Ultra-Fine Limestone Powder

2013 ◽  
Vol 368-370 ◽  
pp. 1112-1117
Author(s):  
Jin Hui Li ◽  
Liu Qing Tu ◽  
Ke Xin Liu ◽  
Yun Pang Jiao ◽  
Ming Qing Qin
Keyword(s):  
Fly Ash ◽  
High Performance ◽  
Mechanical Performance ◽  
Chloride Ion ◽  
Limestone Powder ◽  
Ion Permeability ◽  
High Quality ◽  
Cracking Resistance ◽  
Slag Powder ◽  
Marine Concrete

In order to solve the environment pollution of limestone powder during production of limestone manufactured sand and gravel and problem of lack of high quality fly ash or slag powder in ocean engineering, ultra-fine limestone powder was selected for preparation of green high-performance marine concrete containing fly ash and limestone powder and that containing slag powder and limestone powder for tests on workability, mechanical performance, thermal performance, shrinkage, and resistance to cracking and chloride ion permeability. And comparison was made between such green high-performance concrete and conventional marine concrete containing fly ash and slag powder. Moreover, the mechanism of green high-performance marine concrete was preliminary studied. Results showed that ultra-fine limestone powder with average particle size around 10μm had significant water reducing function and could improve early strength of concrete. C50 high-performance marine concrete prepared with 30% fly ash and 20% limestone powder or with 30% slag powder and 30% limestone powder required water less than 130kg/m3, and showed excellent workability with 28d compressive strength above 60MPa, 56d dry shrinkage rate below 300με, cracking resistance of grade V, 56d chloride ion diffusion coefficient not exceeding 2.5×10-12m2/s. Mechanical performance and resistance to chloride ion permeability of limestone powder marine concrete were quite equivalent to those of conventional marine concrete. But it had better workability, volume stability and cracking resistance. Moreover, it can serve as a solution to the lack of high quality fly ash and slag powder.

Performance Characterization of Stone Mastic Asphalt using Steel Fiber

2021 ◽  
Vol 02 (02) ◽  
Author(s):  
Ekarizan Shaffie ◽  
◽  
H.A. Rashid ◽  
Fiona Shiong ◽  
Ahmad Kamil Arshad ◽  
...  
Keyword(s):  
Steel Fiber ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Moisture Susceptibility ◽  
Mastic Asphalt ◽  
Bitumen Content ◽  
Stone Mastic Asphalt ◽  
The Stability ◽  
Marshall Stability

Stone Mastic Asphalt (SMA) is a gap-graded hot mixture designed to provide higher resistance towards permanent deformation and rutting potential by 30% to 40% more than dense-graded asphalt, due to its stable aggregate skeleton structure. However, compared to other types of hot mix asphalt, SMA unfortunately has some shortcomings in term of its susceptibility towards moisture-induced damage due to its structure and excessive bitumen content in the composition. This research aims to assess the performance of a SMA mixture with steel fiber by enhancing overall stability, abrasion resistance, and, most importantly, moisture susceptibility. This study involved the incorporation of various steel fiber proportions of 0%, 0.3%, 0.5% and 0.7% by the total weight of mixture. The steel fiber modified SMA was made up of 6.0% PEN 60/70 bitumen content. The performance of SMA were evaluated through Marshall stability and flow test, Cantabro loss test and indirect tensile strength test. The results obtained from the testing showed that the incorporation of steel fiber is significantly effective to enhance the resistance towards moisture damage, while increasing the stability and reducing the abrasion loss of SMA mixture, compared to conventional mixture. Overall, it can be concluded that the addition of steel fiber in asphalt mixture specifically SMA, has improved the mechanical performance in the application of asphalt pavement with the optimum steel fiber proportion of 0.3% by the weight of mixture. The developed models between the independent variables and responses demonstrated high levels of correlation. The study found that Response Surface Methodology (RSM) is an effective statistical method for providing an appropriate empirical model for relating parameters and predicting the optimum performance of an asphaltic mixture to reduce flexible pavement failure.

Fiber element modeling of circular double-skin concrete-filled stainless-carbon steel tubular columns under axial load and bending

2022 ◽  
pp. 136943322110651
Author(s):  
Mizan Ahmed ◽  
Qing Quan Liang ◽  
Ahmed Hamoda
Keyword(s):  
Stainless Steel ◽  
Carbon Steel ◽  
High Performance ◽  
Mechanical Performance ◽  
Axial Strain ◽  
High Strength ◽  
Offshore Structures ◽  
Numerical Results ◽  
Beam Columns ◽  
Double Skin

Circular concrete-filled double-skin steel tubular (CFDST) columns with external stainless-steel are high-performance composite columns that have potential applications in civil construction including the construction of offshore structures, bridge piers, and transmission towers. Reflecting the limited research performed on investigating their mechanical performance, this study develops a computationally efficient fiber model to simulate the responses of short and slender beam-columns accounting for the influences of material and geometric nonlinearities. Accurate material laws of stainless steel, carbon steel, and confined concrete are implemented in the mathematical modeling scheme developed. A new solution algorithm based on the Regula-Falsi method is developed to maintain the equilibrium condition. The independent test results of short and slender CFDST beam-column are utilized to validate the accuracy of the theoretical solutions. The influences of various column parameters are studied on the load-axial strain [Formula: see text] curves, load-lateral deflection [Formula: see text] curves, column strength curves, and interaction curves of CFDST columns. Design formulas are suggested for designing short and beam-columns and validated against the numerical results. The computational model is found to be capable of simulating the responses of CFDST short and slender columns reasonably well. Parametric studies show that the consideration of the concrete confinement is important for the accuracy of the prediction of their mechanical responses. Furthermore, high-strength concrete can be utilized to enhance their load-carrying capacity particularly for short and intermediate slender beam-columns. The strengths of CFDST columns computed by the suggested design model are in good agreement with the test and numerical results.

Sign in / Sign up

Export Citation Format

Share Document