Predominance of flowers and newly formed pods in reproductive abscission of Lupinus angustifolius L

1992 ◽  
Vol 43 (5) ◽  
pp. 1117 ◽  
Author(s):  
A Pigeaire ◽  
R Delane ◽  
A Seymor ◽  
CA Atkins
Keyword(s):  
High Frequency ◽  
Dry Weight ◽  
Sowing Date ◽  
Reproductive Organs ◽  
Lupinus Angustifolius ◽  
Index Number ◽  
Physiological Basis ◽  
Stage Of Development ◽  
The Difference ◽  
Final Harvest

The stage of development at which reproductive organs abscised on the main inflorescence of Lupinus angustifolius L. plants was studied in field plot trials which incorporated site, sowing date, density and cultivar treatments. The average number of pods on the main inflorescence at final harvest ranged over 1.8 to 8.4, the Reproductive Index (number of seeds per gram total above-ground dry weight, excluding seeds) varied from 3.1 to 7.6, and the Harvest Index from 0.17 to 0.50. Four stages at which abscission occurred were identified (flower [ovaries 7-8 mm long], pl [pods 9-10 mm], p2 [pods 11-13 mm], p3 [pods 14-27 mm long]) and used to assess reproductive development on a week by week basis. In all treatments, losses of flowers and pl pods accounted for 92% or more of total reproductive abscission and, of this, the majority was due to flower abscission. The number of abscised pl pods was relatively stable across treatments, but the number of p2 and p3 pods which abscised varied markedly with sowing date, possibly indicating a relationship with changes in environmental conditions. Examination of ovaries following cryosectioning and fluorescence microscopy showed that pollination of ovules occurred with a similarly high frequency in flowers destined to abscise (77%) compared with those destined to form pods (88%). The difference was due to a 50% probability of pollination of the fifth ovule in ovaries of flowers forming pods and only a 25% probability in those which abscised. The data are discussed in relation to the likely physiological basis for the regulation of reproductive abscission in the species.

Variation in development of wheat and barley in response to sowing date and variety

1985 ◽  
Vol 104 (2) ◽  
pp. 383-396 ◽  
Author(s):  
E. J. M. Kirby ◽  
Margaret Appleyard ◽  
Gwynneth Fellowes
Keyword(s):  
Shoot Apex ◽  
Spring Barley ◽  
Sowing Date ◽  
Leaf Sheath ◽  
Stem Length ◽  
Main Shoot ◽  
Stage Of Development ◽  
Number Of Leaves ◽  
The Difference ◽  
Made In

SummaryA number of commercial varieties and advanced breeding lines of wheat and of barley were each sown successively in the field from early in September until late in February in 3 or 2 years. Shoot apex development was monitored throughout the growing season and the dates at which the double ridge stage and the terminal spikelet stage were attained are reported. There was considerable variation in the date at which these stages occurred, associated both with variety and date of sowing. When sown early, spring wheat varieties and the winter wheat, Fenman, developed more rapidly than the other winter wheats, but the difference disappeared in sowings made in the middle of October or later. Spring barley developed more quickly than winter barley and the difference persisted until sowings made in mid-November.Length of the longest leaf sheath, number of emerged leaves on the main shoot and the time when stem elongation began (‘ear at 1 cm’), plant characters used to assess the stage for various agronomic treatments, were measured in parallel with apex development. The relationships between number of emerged leaves and the length of the longest leaf sheath and stage of development were found to vary with sowing date. The stage ‘ear at 1 cm’ provided a good guide to shoot apex development. Stem length and number of elongated internodes varied with date of sowing. Some of the variation in number of emerged leaves at a given stage and in the final number of elongated internodes was found to be correlated with total number of leaves on the main shoot. The form of analysis used indicated that sowing date may have important effects, via its effect on the number of leaves on the main shoot, on the duration of ear growth in wheat and barley and on the duration of ear formation in barley.

Effects of sowing date, plant density and year on growth and yield of Brussels sprouts (Brassica oleracea var. bullata subvar. gemmifera)

1989 ◽  
Vol 112 (3) ◽  
pp. 359-375 ◽  
Author(s):  
A. E. Abuzeid ◽  
S. J. Wilcockson
Keyword(s):  
Solar Radiation ◽  
Dry Matter ◽  
Plant Density ◽  
Dry Weight ◽  
Sowing Date ◽  
Dry Matter Content ◽  
Bud Growth ◽  
The Difference ◽  
Total Dry Weight ◽  
Late Sowing

SummaryIn field experiments in 1983–85 in Northumberland, UK, early sowings achieved a leaf area index (LAI) of 3·5, capable of intercepting 90–95% total incident solar radiation, earlier than late sowings. As there was a close relationship between total dry weight, bud dry weight and amount of intercepted solar radiation, early sowings invariably outyielded later ones. The efficiency of energy conversion of radiation was 1·28, 2·05 and 2·11 g/MJ for total dry weight and 0·97, 0·83 and 0·67 g/MJ for bud dry weight in 1983, 1984 and 1985, respectively. Harvest index ranged from ca. 25% in 1985 to 40% in 1984.Increasing plant density from 2·22 to 6·66 plants/m2 advanced and increased maximum LAI and total and bud dry weight per m2 but had an adverse effect on distribution of dry matter. Maximum total dry weights were achieved at or slightly after maximum LAI. The onset of rapid bud growth coincided with maximum total standing dry weight and was advanced by early sowing but largely unaffected by plant density.Early-sown crops produced more buds than late-sown ones because of a longer growing season. Plant density had a large effect on the number of buds per m2, which was almost directly proportional as the number of buds per plant was not severely affected. However, individual bud size was restricted as a result of competition for assimilates. Approximately 80% of buds finally recorded had been produced before significant bud growth had occurred.Total bud fresh yields averaged over all sowing dates reached 17 t/ha in 1983 and 31 t/ha in 1984. The lower yield in 1983 was the result of late sowing caused by unfavourable weather. Early sowings significantly outyielded late ones because of earlier onset of rapid bud growth which gave a longer growing period. The effect of plant density on total sprout yield was less pronounced than that of sowing date but effects on yield per plant were large.Yields of buds in the freezing grade (20–30 mm) increased rapidly between late September and early to mid-November in both 1983 and 1984 and reached 7·5 and 8·8 t/ha, respectively. The difference between freezing-grade yields in the two years (1·3 t/ha) was much less than the difference between total yields (14 t/ha). Late sowing in 1983 restricted bud growth resulting in a higher proportion in the freezing grade. Plant density had a greater effect on freezing-grade yield than on total yield. Low planting densities gave high yields of small buds at early harvests but denser planting gave higher yields at later harvests. Generally, increases in bud fresh weight over the harvest period were greater than those in bud dry weight because of water uptake. The average dry matter content of buds declined by 2–5 % from October to January.The experiments confirmed that manipulation of sowing date and planting density is an effective way of spreading harvest date throughout the season in order to achieve an orderly sequence of crops for the fresh market and for processing.

Morphophysiological determinants of yield in rapeseed (Brassica campestris and Brassica napus). I. Growth and morphological characters

1974 ◽  
Vol 25 (5) ◽  
pp. 697 ◽  
Author(s):  
N Thurling
Keyword(s):  
Brassica Napus ◽  
Leaf Area ◽  
Seed Yield ◽  
Brassica Campestris ◽  
Dry Weight ◽  
Sowing Date ◽  
Dry Matter Distribution ◽  
Vegetative Phase ◽  
Total Dry Weight ◽  
Final Harvest

Variation in sowing date was found to have a marked effect on the seed yield and different morphological and growth characteristics of spring cultivars of the oilseed rape species Brassica campestris and Brassica napus. The two species differed appreciably, however, in their responses to successive delays in sowing date. In B. napus, there was a significant and continuous decline in seed yield with later sowings. This decline in seed yield was associated primarily with a reduction in the total dry weight of the plant at the final harvest which, in turn, was most closely correlated with the duration of the vegetative phase of growth. The total dry weight of the plant and the seed yield were greatest in the first sowing where flowering was substantially later than in either of the later sowings. Since earlier-flowering cultivars of B. napus would be better adapted to Western Australian conditions, where there is a rapid decline in soil moisture reserves during the spring, significant improvements in seed yield could depend largely on increasing the rate of pre-anthesis growth. In this experiment, however, no significant variation in the relative rate of growth prior to flowering was observed because of the marked negative association between net assimilation rate and leaf area ratio. Further studies of the variation in growth amongst a far wider range of genotypes will, nevertheless, be necessary to properly assess the feasibility of increasing relative growth rates by selection. The seed yield of B. campestris was substantially greater in the second sowing than in either the first or third sowings. Although seed yield was significantly correlated with both total dry weight of the plant at final harvest and the harvest index, the latter appeared to be the most important determinant of seed yield in this species. By contrast with B. napus, most of the dry weight of the plant at the final harvest was accumulated during the post-anthesis phase of growth. Accordingly, the character leaf area duration between anthesis and final harvest was found to be the most significant determinant of the total dry weight of the plant in B. campestris. The leaf weight ratio of the plant at anthesis also contributed significantly to total dry weight at the final harvest; this indicates that the pattern of dry matter distribution in the plant during the vegetative phase could prove a useful criterion for selecting potentially high-yielding strains of this species.

Cultivar, sowing date and plant density studies of fibre hemp (Cannabis sativa L.) in Tasmania

2000 ◽  
Vol 40 (7) ◽  
pp. 975 ◽  
Author(s):  
S. N. Lisson ◽  
N. J. Mendham
Keyword(s):  
Plant Density ◽  
Cannabis Sativa ◽  
Initial Density ◽  
Dry Weight ◽  
Sowing Date ◽  
Planting Density ◽  
North West ◽  
Linum Usitatissimum L ◽  
Short Period ◽  
Final Harvest

This paper reports on a 3-year agronomic study into fibre hemp (Cannabis sativa L.) conducted in Tasmania, Australia. The performance of selected hemp cultivars, and the responses to sowing date and plant density were investigated as part of a broad feasibility study to assess the potential of fibre hemp and flax (Linum usitatissimum L.) as sources of fibre for the Australian newsprint industry. Trials were conducted at separate sites in north-west and south-east Tasmania. Nine cultivars from the Ukraine, Hungary and France were examined in 2 separate trials. The Hungarian cultivars, Kompolti and Unico B, and the French cultivar Futura 77 had the highest single plot dry stem yields (up to 1500 g/m 2 ) and bark proportions (up to 40%). All the cultivars flowered toward the end of January, suggesting that the growing season in Tasmania could accommodate much later flowering and potentially higher yielding genotypes. Levels of the psychoactive agent, delta-9-tetrahydrocannabinol were consistently below the legal maximum of 0.35% (dry weight basis). Three sowing date trials were conducted across 2 seasons incorporating dates between mid September and mid November and a single autumn planting at the end of May. Interactions with cultivar and planting density were also considered. Stem and bark yield declined with delays in sowing after early–mid October in response to a decline in calendar days and thermal time from sowing to flowering. The response was most pronounced in sowings of Kompolti, which flowered within a short period and differed more substantially in durations to flowering. Earlier sowings were limited by premature flowering in response to shorter daylengths and by poor drainage at one of the 2 trial sites. The success of early sowings in Tasmania would appear to depend on finding cultivars less sensitive tophotoperiod, and cultivation on well drained sites. A further trial was conducted to investigate the influence of plant density on hemp yields. Treatments included densities from 50 to 300 plants/m 2 . Plant density declined with crop growth across all treatments and was most pronounced for populations of 200 and 300 plants/m 2 . Final harvest stem yield responded in a parabolic manner to plant density, with maximum yields at about 110 plants/m 2 . Differences in the percentage of the long, high quality bark fibre at final harvest were generally small and not significant. However, regression analysis of the response of bark percentage suggested a linear decline with increasing initial density.

scholarly journals PRODUCTION OF DELPHINIUM IN A TOBACCO TRANSPLANT GREENHOUSE

HortScience ◽  
2006 ◽  
Vol 41 (3) ◽  
pp. 513A-513
Author(s):  
Carl E. Niedziela ◽  
Stephen A. Emerson ◽  
Guochen Yang
Keyword(s):  
Production Systems ◽  
Latin Square ◽  
Dry Weight ◽  
The Other ◽  
Planting Density ◽  
Fresh Weight ◽  
Stage Of Development ◽  
Square Cells ◽  
The One ◽  
Final Harvest

Plug seedlings of delphinium (Delphinium elatum L. `Guardian') were planted on 19 Nov. 2004 in four production systems (harvest lugs, lay-flat bags, pots, and polystyrene trays). Production systems were randomized in a Latin-square design with four replications of each system. Each treatment plot was 0.7 × 1.1 m. Planting density was 31 plants/m2. The harvest lugs were 55 × 37 × 16 cm. The lay-flat bags were 114 × 30 × 3 cm. The pots were 25 cm bulb pans. The polystyrene trays were 67 × 34 × 5 cm and contained 32 square cells. All of the containers were filled with the same tobacco germination media. The plants in the harvest lugs, lay-flat bags and pots were irrigated daily with 150 mg N/kg from 20N–4.4P–16.6K. The plants in the polystyrene trays were floated on a solution of 150 mg N/kg from 20N–4.4P–16.6K. Float solutions were monitored and adjusted weekly for volume and fertilizer concentration. Individual stems were harvested at the one-third bloom stage of development. The final harvest was on 1 Apr. 2005. Fewer stems were harvested from float trays and lay-flat bags than from pots and harvest lugs. The stems harvested from float tray plots were shorter than those from the other three systems. Stem fresh weight from greatest to least was lay-flat bags, harvest lugs, pots, and float trays. Stem dry weight was less for float trays than the other three systems.

Comparison of In-the-Ear and Over-the-Ear Hearing Aid Fittings

1986 ◽  
Vol 51 (4) ◽  
pp. 362-369 ◽  
Author(s):  
Donna M. Risberg ◽  
Robyn M. Cox
Keyword(s):  
Hearing Aids ◽  
High Frequency ◽  
Comparative Evaluation ◽  
Speech Intelligibility ◽  
Hearing Aid ◽  
Hearing Aid Fitting ◽  
The Difference ◽  
Functional Gain ◽  
The Relationship

A custom in-the-ear (ITE) hearing aid fitting was compared to two over-the-ear (OTE) hearing aid fittings for each of 9 subjects with mild to moderately severe hearing losses. Speech intelligibility via the three instruments was compared using the Speech Intelligibility Rating (SIR) test. The relationship between functional gain and coupler gain was compared for the ITE and the higher rated OTE instruments. The difference in input received at the microphone locations of the two types of hearing aids was measured for 10 different subjects and compared to the functional gain data. It was concluded that (a) for persons with mild to moderately severe hearing losses, appropriately adjusted custom ITE fittings typically yield speech intelligibility that is equal to the better OTE fitting identified in a comparative evaluation; and (b) gain prescriptions for ITE hearing aids should be adjusted to account for the high-frequency emphasis associated with in-the-concha microphone placement.

Reproductive Organ Education for Psychic Health Development of Early Age

2018 ◽  
Vol 2 ◽  
Author(s):  
Dwi Darwati
Keyword(s):  
Early Childhood ◽  
Early Childhood Development ◽  
Deviant Behavior ◽  
Reproductive Organs ◽  
Reproductive Organ ◽  
The Body ◽  
Childhood Development ◽  
Early Age ◽  
Digital Era ◽  
Stage Of Development

Reproductive  health education should be given since early childhood by using language that is adapted to the stage of development. If you procrastinate and wait until the teenager it is already too late because in the days of the digital era, as now, all the information can be easily accessed by anyone including children early age. If the early childhood misinformed about their reproductive organs it would disrupt the physical and psychological development due to the wrong behavior in caring for and maintaining reproductive organs. Qur’an as the holy book of Muslims describes the steps of reproduction and  imparting education wisely as well as how to apply such education. This kind of education must be in accordance with the conditions of children and there should not be a lie about it We can also use media and methods such as pictures, songs, tap or other visual  media which can give clearer information, so that children can clearly see parts of the body, their characteristics, and how to treat and care them. The impropriate approach in conveying this kind of knowledge will be very dangerous for children. The provision of early age reproductive organs education can prevent the occurrence of deviant behavior as well as protect children from dangerous influence in early childhood development.

scholarly journals Potential of Pre-Harvest Wastes of Tobacco (Nicotiana tabacum L.) Crops, Grown for Smoke Products, as Source of Bioactive Compounds (Phenols and Flavonoids)

2021 ◽  
Vol 13 (4) ◽  
pp. 2087
Author(s):  
Maria Isabella Sifola ◽  
Linda Carrino ◽  
Eugenio Cozzolino ◽  
Luisa del Piano ◽  
Giulia Graziani ◽  
...  
Keyword(s):  
Bioactive Compounds ◽  
Dry Weight ◽  
Waste Biomass ◽  
Total Polyphenols ◽  
Nicotiana Tabacum L ◽  
Diammonium Salt ◽  
Q Exactive ◽  
Tobacco Cultivation ◽  
Folin Assay ◽  
Final Harvest

Tobacco cultivation is characterized by high amounts of waste biomasses whose disposal frequently represents a complex and expensive problem. A study was conducted to evaluate thepotential of pre-harvest light air-cured (Burley) and dark fire-cured (Kentucky) tobacco waste biomasses as a source of bioactive compounds (nutraceutical ingredients) such as polyphenols. Pre-harvest waste materials (topping fresh materials and residual stalks at final harvest) were collected to determine dry matter, total polyphenols content (TPC; Folin assay), and DPPH (2,2-diphenyl-1-picrylhydrazyl) and ABTS (2,20-azino-bis(3-ethylbenzothiazoline-60-sulfonic acid) diammonium salt) antioxidant capacity. Polyphenols quali-quantitative profiles obtained by Orbitrap Q Exactive of both tobacco types were also determined. Total pre-harvest waste biomass amounted to 3956.9 and 1304.4 kg d.w. ha−1 in light air-cured (Burley) and dark fire-cured (Kentucky) tobacco types, respectively. Polyphenols content, expressed as g kg−1 dry weight (d.w.), ranged between 4.6 and 15.7 g kg−1 d.w. and was generally greater in leaves than in stalks. Considering both leaves and stalks, the light air-cured (Burley) tobacco crop yielded 22.1 kg ha−1 of polyphenols, while the dark fire-cured (Kentucky) tobacco yielded 12.0 kg ha−1. DPPH and ABTS were significantly greater in leaves than in stalks waste biomass in both types of tobacco. The most abundant components were quinic and chlorogenic acids, rutin, and luteolin rutinoside.

scholarly journals Musik Gamelan Bali Meningkatkan Pertumbuhan dan Produktivitas Tanaman Sawi Pakcoy (Brassica rafa L.)

2018 ◽  
Vol 6 (2) ◽  
pp. 73
Author(s):  
Dewa Putu Yoga Gautama ◽  
I Made Anom S. Wijaya ◽  
I Wayan Widia
Keyword(s):  
Plant Growth ◽  
Plant Height ◽  
High Frequency ◽  
Dry Weight ◽  
Sound Waves ◽  
High Frequency Sound ◽  
Frequency Sound ◽  
Green Leaves ◽  
Mustard Plant ◽  
Canopy Area

Pemberian gelombang suara dengan frekuensi tinggi dapat merangsang mulut daun  (stomata) tetap terbuka, akibatnya laju dan efisiensi penyerapan pupuk meningkat yang bermanfaat bagi tanaman. Hasil penggunaan sonic bloom pada tanaman adalah mampu menstimulir metabolisme sel-sel tanaman, sehingga terjadi peningkatan penyerapan nutrisi dan uap air lewat daun yang berpengaruh pada pertumbuhan dan produktivitas tanaman. Tujuan dari penelitian ini yaitu (1) untuk mengetahui pengaruh pemberian musik Gamelan Bali terhadap pertumbuhan dan produktivitas tanaman sawi pakcoy dan (2) untuk menentukan jenis musik Gamelan Bali yang memberikan pertumbuhan dan produktivitas sawi pakcoy yang terbaik. Penelitan ini menggunakan tanaman sawi pakcoy (Brassica Rafa L.).  Perlakuan yang diberikan  dalam penelitian adalah pemberian musik gamelan bali dengan nuansa musik yang berbeda. Perlakuan 1 menggunakan musik gamelan Angklung, Perlakuan 2 menggunakan musik gamelan Semarpagulingan dan Perlakuan 3 menggunakan musik gamelan Gong Kebyar. Data yang diperoleh dianalis ANOVA dengan program IBM SPSS 20. Variabel yang diamati yaitu tinggi tanaman, luas kanopi daun tanaman, tingkat kehijauan daun tanaman, dan berat kering. Hasil penelitian menunjukan bahwa pemberian musik gong kebyar menghasilkan nilai tertinggi pada variabel tinggi tanaman, luas kanopi daun, tingkat kehijauan daun, dan berat kering yang  masing menghasilkan nilai yaitu yaitu 29,98 cm, 1684 cm2, 186,79, dan 68,61 gr. Pemberian musik memberikan pengaruh yang positif dan berbeda nyata pada pertumbuhan tanaman sawi pakcoy. Semakin tinggi frekuensi musik yang diberikan maka semakin baik pertumbuhan tanaman sawi pakcoy yang dihasilkan.  High frequency sound waves can stimulate the mouth of leaf (stomata) remains opened.The stomata remains open leading to efficient absorption of fertilizer. The purposes of this research were (1) to find out the effect of Balinese instrument music on the growth and productivity of pakcoy mustard plant and (2) to determine the type of Balinese instrument music that gives the best growth and productivity of mustard pakcoy. The treatment of this research was the application of Balinese instrument music with different musical nuances for 3 hours. Treatment 1 was using Angklung instruments music, treatment 2 was using Semarpagulingan instrument music and treatment 3 using Gong Kebyar instrument music. The obtained data was analized by ANOVA with the IBM SPSS 20 program. The observed variables include plant height, canopy area of plant leaf, green leaves level and dry weight. The results showed that Gong Kebyar instrument music application produces the highest value of 29.98 on the height of the plant variables, the widest value of 1684 cm2  on the canopy area variables, the biggest value that is 68,61 gr on the dry weight variables and the largest value of 186.79 on the green leaves level variables. Balinese instrument music application effect to the growth of pakcoy mustard plant. The best plant growth was the plant with gong kebyar instrument music application from all observed variables.

scholarly journals Hyperfine structure in the arc spectrum of cæsium and nuclear rotation

1928 ◽  
Vol 121 (787) ◽  
pp. 432-447 ◽  
Keyword(s):  
Hyperfine Structure ◽  
Nuclear Spin ◽  
High Frequency ◽  
Principal Series ◽  
Very High Frequency ◽  
Nuclear Rotation ◽  
Higher Temperature ◽  
The Difference ◽  
Mechanical Moment ◽  
Very High

The arc spectrum of cæsium was investigated with the object of finding whether any of its lines possessed hyperfine structure, resulting from a nuclear magnetic moment, due to a quantised nuclear spin. The lines belonging to the principal series should, owing to the greater degree of penetration of the electron in the (1 s or 6 1 ) orbit, and the correspondingly greater interaction, show the greatest effect. The lines of the principal series are very easily broadened if the vapour pressure of the metal becomes high, so that great care had to be used in obtaining the spectrum of cæsium at a sufficiently low temperature. The most satisfactory method of excitation was found to be the application by means of external electrodes of a very high frequency alternating current to a tube filled with helium at about 2 mm. pressure containing a small quantity of cæsium. The tube required slight heating to bring out the cæsium lines; without this the helium spectrum was very much stronger than the metallic spectrum. At a very low vapour pressures of cæsium the discharge was blue in colour. Under these conditions the lines of the principal series showed no broadening greater than that due to thermal agitation, but at a slightly higher temperature the colour of the discharge became purple and the lines broadened. The lines belonging to the principal series were found to be very close doublets with very nearly constant frequencies differences. A theory is worked out which explains the origin of these doublets, assuming a nuclear spin of one half quantum; by correlating the difference in the separation of the hyperfine structure doublets in the 1 s — m 2 p 3/2 lines and the 1 s — m 2 p 1/2 lines, it is shown that a ratio of the magnetic to the mechanical moment of the nucleus about twice as great as the corresponding ratio for the electron would account for the observed frequency differences. The spectral notation used throughout is that of Hund. The results are compared with those found for the hyperfine structure of some of the bismuth lines by Back and Goudsmid, and are found to be in satisfactory agreement. A selection principle is found which applies both to the bismuth and the cæsium spectrum.

Sign in / Sign up

Export Citation Format

Share Document