Mechanical properties of soybean plants under various plant densities

2020 ◽  
Vol 71 (3) ◽  
pp. 249 ◽  
Author(s):  
Yao Xu ◽  
Rui Zhang ◽  
Zhaofang Hou ◽  
Chao Yan ◽  
Xuan Xia ◽  
...  

Lodging can reduce grain yield and quality, especially in crops planted at high densities. Force analysis, which relates stem mechanical properties and morphological characteristics under high densities, was used to study lodging in soybean (Glycine max (L.) Merr.). We applied mechanical lodging and examined the relationships between stem bending moment of the breaking force and morphological characteristics in two soybean varieties of contrasting heights grown at four crop population densities (200000, 300000, 400000 and 500000 plants ha–1). The experiment was performed in a split-plot design during 2015–16. Measurements were made during the R1–R8 growth stages. Results showed that the full seed stage was the most sensitive period for lodging. Stem strength of the soybean plants increased with growth and development; however, during the R5–R6 stages, the weakened degree of stem strength was greater than the gravity moment. This was the primary reason for the soybeans tending to lodge during this period. In addition, increasing the planting density weakened the mechanical properties significantly. During breeding efforts to improve the soybean lodging resistance, more attention should be paid to strengthening soybean stems. This study also showed that the ratio of stem diameter to plant height could be a new quantitative index for evaluating the lodging resistance of soybeans.

Plant Disease ◽  
2021 ◽  
Author(s):  
Nathali López-Cardona ◽  
YUDY ALEJANDRA GUEVARA ◽  
Lederson Gañán-Betancur ◽  
Carol Viviana Amaya Gomez

In October 2018, soybean plants displaying elongated black to reddish-brown lesions on stems were observed in a field planted to the cv. BRS Serena in the locality of Puerto López (Meta, Colombia), with 20% incidence of diseased plants. Symptomatic stems were collected from five plants, and small pieces (∼5 mm2) were surface sterilized, plated on potato dextrose agar (PDA) and incubated for 2 weeks at 25°C in darkness. Three fungal isolates with similar morphology were obtained, i.e., by subculturing single hyphal tips, and their colonies on PDA were grayish-white, fluffy, with aerial mycelium, dark colored substrate mycelium, and produced circular black stroma. Pycnidia were globose, black, occurred as clusters, embedded in tissue, erumpent at maturity, with an elongated neck, and often had yellowish conidial cirrus extruding from the ostiole. Alpha conidia were observed for all isolates after 30 days growth on sterile soybean stem pieces (5 cm) on water agar, under 25ºC and 12 h light/12h darkness photoperiod. Alpha conidia (n = 50) measured 6.0 – 7.0 µm (6.4 ± 0.4 µm) × 2.0 – 3.0 µm (2.5± 0.4 µm), were aseptate, hyaline, smooth, ellipsoidal, often biguttulate, with subtruncate base. Beta conidia were not observed. Observed morphological characteristics of these isolates were similar to those reported in Diaporthe spp. by Udayanga et al. (2015). DNA from each fungal isolate was used to sequence the internal transcribed spacer region (ITS), and the translation elongation factor 1-α (TEF1) gene, using the primer pairs ITS5/ITS4 (White et al. 1990) and EF1-728F/EF1- 986R (Carbone & Kohn, 1999), respectively. Results from an NCBI-BLASTn, revealed that the ITS sequences of the three isolates (GenBank accessions MW566593 to MW566595) had 98% (581/584 bp) identity with D. miriciae strain BRIP 54736j (NR_147535.1), whereas the TEF1 sequences (GenBank accessions MW597410 to MW597412) had 97 to 100% (330-339/339 bp) identity with D. ueckerae strain FAU656 (KJ590747). The species Diaporthe miriciae R.G. Shivas, S.M. Thomps. & Y.P. Tan, and Diaporthe ueckerae Udayanga & Castl. are synonymous, with the latter taking the nomenclature priority (Gao et al. 2016). According to a multilocus phylogenetic analysis, by maximum likelihood, the three isolates clustered together in a clade with reference type strains of D. ueckerae (Udayanga et al. 2015). Soybean plants cv. BRS Serena (growth stages V3 to V4) were used to verify the pathogenicity of each isolate using a toothpick inoculation method (Mena et al. 2020). A single toothpick colonized by D. ueckerae was inserted directly into the stem of each plant (10 plants per isolate) approximately 1 cm below the first trifoliate node. Noncolonized sterile toothpicks, inserted in 10 soybean plants served as the non-inoculated control. Plants were arbitrarily distributed inside a glasshouse, and incubated at high relative humidity (>90% HR). After 15 days, inoculated plants showed elongated reddish-brown necrosis at the inoculated sites, that were similar to symptoms observed in the field. Non-inoculated control plants were asymptomatic. Fungal cultures recovered from symptomatic stems were morphologically identical to the original isolates. This is the first report of soybean stem canker caused by D. ueckerae in Colombia. Due to the economic importance of this disease elsewhere (Backman et al. 1985; Mena et al. 2020), further research on disease management strategies to mitigate potential crop losses is warranted.


Agronomy ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1177 ◽  
Author(s):  
Bin Cheng ◽  
Ali Raza ◽  
Li Wang ◽  
Mei Xu ◽  
Junji Lu ◽  
...  

The shading of maize and self-shading are the key factors affecting the stem lignin biosynthesis and lodging resistance of soybean at middle and later growth stages in the strip intercropping system. A study was designed to explore the regulation mechanism of lignin metabolism and different planting densities; PD1, PD2, and PD3 were used having a total number of 17 plants m−2, 20 plants m−2, and 25 plants m−2, respectively, on the lodging resistance of strip intercropped soybean stem. Our results depicted that the lower planting density (PD1) appropriately promoted the leaf photosynthesis activities (Pn), increase the activity of lignin-related enzymes and the accumulation of carbohydrates in stems, and eventually enhanced the lodging resistance of the strip intercropped soybean stem. Correlation analysis also showed that the lodging resistance index of soybean stem was significantly correlated with the available light for soybean canopy and Pn strip intercropped soybean stem characteristics and activities of enzymes related to lignin synthesis among the different planting densities. The findings of our research will be useful in future studies to understand the relationship between different light environment, planting densities, and lodging resistance of intercropped soybean and also guide the optimum planting density in maize–soybean intercropping system.


2018 ◽  
Vol 156 (3) ◽  
pp. 387-395
Author(s):  
M. Y. Gui ◽  
D. Wang ◽  
H. H. Xiao ◽  
M. Tu ◽  
F. L. Li ◽  
...  

AbstractPlant height and lodging resistance can affect rice yield significantly, but these traits have always conflicted in crop cultivation and breeding. The current study aimed to establish a rapid and accurate plant type evaluation mechanism to provide a basis for breeding tall but lodging-resistant super rice varieties. A comprehensive approach integrating plant anatomy and histochemistry was used to investigate variations in flexural strength (a material property, defined as the stress in a material just before it yields in a flexure test) of the rice stem and the lodging index of 15 rice accessions at different growth stages to understand trends in these parameters and the potential factors influencing them. Rice stem anatomical structure was observed and the lignin content the cell wall was determined at different developmental stages. Three rice lodging evaluation models were established using correlation analysis, multivariate regression and artificial radial basis function (RBF) neural network analysis, and the results were compared to identify the most suitable model for predicting optimal rice plant types. Among the three evaluation methods, the mean residual and relative prediction errors were lowest using the RBF network, indicating that it was highly accurate and robust and could be used to establish a mathematical model of the morphological characteristics and lodging resistance of rice to identify optimal varieties.


2021 ◽  
Vol 13 (12) ◽  
pp. 6876
Author(s):  
Yuetao Zuo ◽  
Xueyue Zhang ◽  
Shiyu Zuo ◽  
Xiaosong Ren ◽  
Zhaoyue Liu ◽  
...  

In response to the production crisis caused by a winter feed shortage due to the rapid development of the animal husbandry industry, winter rye 001 was selected to study differences in stalk and senescence characteristics in yield formation in cold regions. Five density treatments were established in a randomized design as 225 × 104 plant·hm−2 (D1), 275 × 104 plant·hm−2 (D2), 325 × 104 plant·hm−2 (D3), 375 × 104 plant·hm−2 (D4), and 425 × 104 plant·hm−2 (D5). Stem characteristics, SOD activity, POD activity, MDA content, and differences in yield and feeding quality under different population densities were analyzed. The plant height, center of gravity, and stem basal internode length showed an increasing trend with an increase in planting density. The stem wall thickness, diameter, strength, and lodging resistance indices decreased. At 275 × 104 plants·hm−2, the rye crude protein content was the highest while neutral washing fiber and acid washing fiber were the lowest, and feed quality was the best. With an increase in density, spike number, grain number per spike, and thousand-grain weight first increased and then decreased. We concluded that the yield and feeding quality were best when the basic seedling was at 275 × 104 plants hm−2.


Genes ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 718
Author(s):  
Bingxin Meng ◽  
Tao Wang ◽  
Yi Luo ◽  
Deze Xu ◽  
Lanzhi Li ◽  
...  

Lodging reduces rice yield, but increasing lodging resistance (LR) usually limits yield potential. Stem strength and leaf type are major traits related to LR and yield, respectively. Hence, understanding the genetic basis of stem strength and leaf type is of help to reduce lodging and increase yield in LR breeding. Here, we carried out an association analysis to identify quantitative trait locus (QTLs) affecting stem strength-related traits (internode length/IL, stem wall thickness/SWT, stem outer diameter/SOD, and stem inner diameter/SID) and leaf type-associated traits (Flag leaf length/FLL, Flag leaf angle/FLA, Flag leaf width/FLW, leaf-rolling/LFR and SPAD/Soil, and plant analyzer development) using a diverse panel of 550 accessions and evaluated over two years. Genome-wide association study (GWAS) using 4,076,837 high-quality single-nucleotide polymorphisms (SNPs) identified 89 QTLs for the nine traits. Next, through “gene-based association analysis, haplotype analysis, and functional annotation”, the scope was narrowed down step by step. Finally, we identified 21 candidate genes in 9 important QTLs that included four reported genes (TUT1, OsCCC1, CFL1, and ACL-D), and seventeen novel candidate genes. Introgression of alleles, which are beneficial for both stem strength and leaf type, or pyramiding stem strength alleles and leaf type alleles, can be employed for LR breeding. All in all, the experimental data and the identified candidate genes in this study provide a useful reference for the genetic improvement of rice LR.


2021 ◽  
Vol 20 (8) ◽  
pp. 2077-2089
Author(s):  
Bin LI ◽  
Fei GAO ◽  
Bai-zhao REN ◽  
Shu-ting DONG ◽  
Peng LIU ◽  
...  

2017 ◽  
Vol 32 (2) ◽  
pp. 135-140 ◽  
Author(s):  
M. Ryan Miller ◽  
Jason K. Norsworthy

AbstractTo address recent concerns related to auxin herbicide drift onto soybean, a study was developed to understand the susceptibility of the reproductive stage of soybean to a new auxin herbicide compared with dicamba. Florpyrauxifen-benzyl is under development as the second herbicide in a new structural class of synthetic auxins, the arylpicolinates. Field studies were conducted to (1) evaluate and compare reproductive soybean injury and yield following applications of florpyrauxifen-benzyl or dicamba across various concentrations and reproductive growth stages and (2) determine whether low-rate applications of florpyrauxifen-benzyl or dicamba to soybean in reproductive stages would have similar effect on the progeny of the affected plants. Soybean were treated with 0, 1/20, or 1/160, of the 1X rate of florpyrauxifen-benzyl (30 g ai ha−1) or dicamba (560 g ae ha−1) at R1, R2, R3, R4, or R5 growth stage. Soybean plant height and yield was reduced from 1/20X dicamba across all reproductive stages. High drift rates (1/20X) of florpyrauxifen-benzyl also reduced soybean plant height >25% and yield across R1 to R4 stages. Germination, stand, plant height, and yield of the offspring of soybean plants treated with dicamba and florpyrauxifen-benzyl were significantly affected. Dicamba applied at a rate of 1/20X at R4 and R5 resulted in 20% and 35% yield reduction for the offspring, respectively. A similar reduction occurred from florpyrauxifen-benzyl applied at R4 and R5 at the 1/20X rate, resulting in 15% to 24% yield reduction for the offspring, respectively. Based on these findings, it is suggested that growers use caution when applying these herbicides in the vicinity of reproductive soybean.


IAWA Journal ◽  
2014 ◽  
Vol 35 (2) ◽  
pp. 158-169 ◽  
Author(s):  
Zhao Rongjun ◽  
Yao Chunli ◽  
Cheng Xianbao ◽  
Lu Jianxiong ◽  
Fei Benhua ◽  
...  

The anatomical characteristics, chemical composition, and physical and mechanical properties of fast-growing Populus × euramericana cv. ‘74/76’ juvenile wood were investigated. Four- to five-year-old clonal plantation trees were harvested from two different experimental sites in the suburbs of Beijing. The Shunyi site had black alkali soil with a planting density of 4 × 6 m and the Miyun site had sandy loam soil with a planting density of 3 × 5 m. The test results showed that the poplar trees from the two sites were both fast growing, with poplar at Shunyi growing faster than at Miyun. There were no significant differences in wood properties between trees grown at the two sites. Fiber length at breast height varied from 872 to 1300 μm between growth rings, average fiber width varied from 21.0 to 25.5 μm and double wall thickness varied from 5.0 to 6.6 μm. Average cellulose, lignin and hemicellulose contents in the samples were 48.9%, 25.4%, and 18.8%, respectively. MFA was higher in the first two growth rings (20–25°), and then decreased rapidly to 12° close to the bark. The average air-dry density at breast height was 401 kg/m3 while the average MOE at breast height was 9.3 GPa. The trees showed large growth rates in both height and stem diameter during the growing season. However, wood properties of the juvenile poplar appeared to be similar to those of poplars with a slower growth rate.


Crop Science ◽  
2018 ◽  
Vol 58 (6) ◽  
pp. 2613-2622 ◽  
Author(s):  
Yuhong Gao ◽  
Hanyu Jiang ◽  
Bing Wu ◽  
Junyi Niu ◽  
Yajiao Li ◽  
...  

Agronomy ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 186 ◽  
Author(s):  
Yushi Zhang ◽  
Yubin Wang ◽  
Delian Ye ◽  
Wei Wang ◽  
Xinming Qiu ◽  
...  

Stalk strength is critical for reducing maize stalk lodging and maintaining grain yield. Ethephon has been widely applied to molding compact plant-type to reduce the lodging risk in maize production. However, there is little information on how ethephon regulates internode mechanical properties to improve maize stalk strength. Multiyear field experiments (2013–2017) were conducted to determine the effects of foliar-applied ethephon on summer maize internode morphological, chemical and mechanical characteristics. The hypothetical structural equation model was used to analyze the contribution of ethephon-induced changes of internode morphological and chemical traits to stalk mechanical strength. Ethephon significantly reduced the basal internode length, while increasing internode diameters and breaking resistance. Meanwhile, ethephon significantly increased the ratio of structural dry matter to total dry matter and the amount of structural dry matter per unit length and volume. Mechanical assays suggested that ethephon significantly altered geometric properties and increased the maximum bending moment, maximum failure force, while depressing the material properties. Furthermore, correlation and path analyses revealed strong correlations and significant contribution of internode morphological properties to stalk mechanical strength, respectively. These results support the conclusion that ethephon-induced morphology alteration played a major role in improving maize internode strength.


Sign in / Sign up

Export Citation Format

Share Document