Influence of Socio-Economy in the Next Generation of Thermal Management Solutions for Electronics Consumer Products

2008 ◽  
Author(s):  
Gamal Refai-Ahmed
Keyword(s):  
High Performance ◽  
Heat Dissipation ◽  
Raw Materials ◽  
Cost Effective ◽  
Electronics Packaging ◽  
Consumer Products ◽  
Innovative Technology ◽  
Target Market ◽  
The World ◽  
The Impact

The past few decades have seen a number of countries around the world emerge as a growing market for high performance computers. This present study examines, in more detail, how socio-economic influences are shaping the demand function and how some computing landscapes are changing as a consequence. This study is addressing one of the key initiatives to enable 50 percent of the world’s population with access to the World Wide Web. Furthermore, this investigation is addressing the challenges for electronics packaging Engineers and Researchers. Therefore, the rational of the developed technology based on the understanding target market and usages will be given. The impact of addressing the heat dissipation and managing the use of the raw materials of the intended products are discussed. In addition, how the electronics packaging engineers can focus on developing affordable innovative technology. Finally, the impact of all of the above is examined in developing the cost effective solution from a global point of view.

PROJECT MANAGEMENT IN THE TRANSITION TO A CIRCULAR ECONOMY

2021 ◽  
pp. 21-26
Author(s):  
Sergey Bushuyev ◽  
Denis Bushuiev ◽  
Victoria Bushuieva ◽  
Olena Verenych
Keyword(s):  
Project Management ◽  
Best Practices ◽  
Organizational Development ◽  
Circular Economy ◽  
Cost Effective ◽  
Life Cycles ◽  
Development Projects ◽  
Waste Products ◽  
The World ◽  
The Impact

The problem of creating effective models, methods and tools for strategic management of projects and programs for the development of organizations in the transition to a circular economy. Global trends in the development of organizations prove that the world is transforming with acceleration. The life cycle of knowledge and technologies for managing complex projects and programs is significantly reduced. The technical and technological complexity of organizational development projects increases due to innovations. These trends create significant challenges in the development of project management systems and programs for the formation of a circular economy in Ukraine. This is especially true of projects and programs in conditions of uncertainty about the impact of COVID 19 and anticipation of a global crisis after a pandemic. Today, the application of proven best practices (benchmarking) is no longer a way forward. Forming a vision, goals and strategy for the implementation of organizational development projects in advance makes our actions rigid, not flexible. When creating a project or program begins with focusing on what is valuable to our customers and the country, it is enough for us to use best practices. But the complexity and innovative orientation of development projects of organizations in the transition to a circular economy creates a number of challenges. One of the answers to these challenges is cost-effective work on project management and development programs, taking into account the trends of transition to a circular economy. Project management teams learn to distinguish between what is valuable and what doesn't matter, this is the path that management methodologies have taken for decades. A number of projects have taken the first steps in implementing the necessary cost-effective / flexible transition that supports sustainability and adaptability to turbulent environmental changes. In the conditions of modern destructive economic relations in the world community the problem of a choice of strategy of projects as drivers of development of the organizations is vital. One of the key approaches to the development of the EU is the transition to a circular economy with maximum utilization of both waste products and projects, and the disposal of project products after the end of product life cycles.

scholarly journals Foreign Experience of State Management of Raw Materials Industries and the Possibility of its Implementation in the Russian Federation in the Post-Covid Period

2021 ◽  
Vol 93 ◽  
pp. 05004
Author(s):  
Dmitry Rodnyansky ◽  
Ivan Makarov ◽  
Evgeniya Korotayeva ◽  
Vadim Kovrigin ◽  
Vladislav Nazarenko
Keyword(s):  
Climate Change ◽  
Raw Materials ◽  
Oil Industry ◽  
State Regulation ◽  
World Economic Forum ◽  
State Management ◽  
The World ◽  
World Economic ◽  
The Russian Federation ◽  
The Impact

In modern conditions, issues related to the effectiveness of the regulation of the oil industry by the state are becoming increasingly important. In January 2018, the World Economic Forum was held in Davos, which, in particular, noted the impact of the growth of protectionist trends in the global trade in hydrocarbons, and the impact of climate change on the planet on the export of hydrocarbons. As a result of the forum, the key ways of adjusting the policy of states in the relevant area were identified. At the same time, a significant number of states are already seeing the process of changing state regulation of the industry. In this article, the authors analyzed the systems of state regulation of the oil industry in different countries, and also gave assessments of the possibility of integrating new mechanisms into the system of sectoral management in Russia in the conditions of post-covid reality

scholarly journals Analysis on the Impact of the Ideology Differences on Films — Take The Captain and Sullyas Examples

2021 ◽  
pp. 127-132
Author(s):  
Weiyi Li ◽  
Keyword(s):  
United States ◽  
The United States ◽  
Cultural Background ◽  
Target Market ◽  
Cultural Backgrounds ◽  
Market Positioning ◽  
Social Ideology ◽  
The World ◽  
Similar Theme ◽  
The Impact

China and the United States share significant differences in social ideology and cultural backgrounds, resulting in many differences in narrative, humanistic expression, communication and target market positioning of films with the similar theme. This essay takes The Captain and Sully as examples. Through analysis and summary, the writer finds that the differences in social ideology and cultural background have an impact on the narrative tactic, target market, the production, and the circulation strategy of films. For example, at the narrative theme level, The Captain is country-centered, while Sully pays more attention to the inner changes of the characters. In terms of production, The Captain pays more attention to the excitement brought to the audience watching the movie, while Sully pays more attention to the movie story itself. In the choice of target market, the target market of The Captain is positioned in China, while Sully positioned in the world. The distinctive choices of plot and theme of the two films reflect the differences in cultures and ideologies of the two countries. The purpose of this essay is to provide film workers with new creative ideas through analysis, and to lead readers to think.

scholarly journals Preface

2021 ◽  
Vol 2125 (1) ◽  
pp. 011001
Keyword(s):  
High Performance ◽  
Direct Reduction ◽  
Low Cost ◽  
Committee Member ◽  
Scientific Information ◽  
Main Research ◽  
University Of Technology ◽  
The World ◽  
Oral Presentations ◽  
The Impact

We are glad to introduce you that the 2021 4th International Conference on Mechanical, Electrical and Material Application (MEMA 2021) was successfully held on October 29-31, 2021. In light of worldwide travel restriction and the impact of COVID-19, MEMA 2021 was carried out in the form of virtual conference to avoid personnel gatherings. Because most participants were still highly enthusiastic about participating in this conference, we chose to carry out MEMA 2021 via online platform according to the original schedule instead of postponing it. MEMA 2021 is to bring together innovative academics and industrial experts in the field of Mechanical, Electrical and Material Application to a common forum. The primary goal of the conference is to promote research and developmental activities in Mechanical, Electrical and Material Application and another goal is to promote scientific information interchange between researchers, developers, engineers, students, and practitioners working all around the world. The conference will be held every year to make it an ideal platform for people to share views and experiences in Mechanical, Electrical and Material Application and related areas. We were greatly honored to invited Prof. Kun Li, from Chongqing University, China and Assoc. Prof. Wei Wei, from Xi’an University of Technology, China as our Conference Chairmen. This scientific event brings together more than 100 national and international researchers in mechanical, electrical and material application. During the conference, the conference model was divided into three sessions, including oral presentations, keynote speeches, and online Q&A discussion. In the first part, some scholars, whose submissions were selected as the excellent papers, were given about 5-10 minutes to perform their oral presentations one by one. Then in the second part, keynote speakers were each allocated 30-45 minutes to hold their speeches. We were pleased to invite four distinguished experts to present their insightful speeches. Our first keynote speaker, Prof. Shahid Hussain, Jiangsu University, China. His research interests include MOS-MOF-MXene Nanomaterials, Gas-Sensors, Electrochemical Supercapacitors, Li-S batteries. And then we had Prof. Jie Huang, from Southwest University, China. His research includes RF/Microwave circuits and sensors. Prof. Qiyan Xu, Anhui University of Technology, China. His main research directions are: New process and technology of low cost steel making, Direct reduction and melting reduction, Development of new metallurgical technology - comprehensive utilization of waste resources. Lastly, we were glad to invite Prof. Kun Li, Chongqing University, China. He mainly engaged in additive manufacturing, intelligent 3D net forming, high performance materials and phase transformation, material computing and other research. In the last part of the conference, all participants were invited to join in a WeChat group to discuss and explore the academic issues after the presentations. The online discussion was lasted for about 30-60 minutes. We are glad to share with you that we still received lots of submissions from the conference during this special period. Hence, we selected a bunch of high-quality papers and compiled them into the proceedings after rigorously reviewed them. These papers feature following topics but are not limited to: Mechanical Dynamics and its Applications, Material Physics, Electrical and Electronic Systems and other related topics. All the papers have been through rigorous review and process to meet the requirements of International publication standard. Lastly, we would like to express our sincere gratitude to the Chairman, the distinguished keynote speakers, as well as all the participants. We also want to thank the publisher for publishing the proceedings. May the readers could enjoy the gain some valuable knowledge from the proceedings. We are expecting more and more experts and scholars from all over the world to join this international event next year. The Committee of MEMA 2021 List of Committee member is available in this pdf.

The Impact of MCAST Apprentices on Insurance Companies Operating in Malta - A Manager’s Perspective

2021 ◽  
Vol 5 (1) ◽  
pp. 127-153
Author(s):  
Joseph Schembri
Keyword(s):  
High Performance ◽  
Insurance Industry ◽  
Learning Experience ◽  
Cost Effective ◽  
Research Problem ◽  
Insurance Companies ◽  
Skilled Workers ◽  
Structured Interviews ◽  
Insurance Firms ◽  
The Impact

This study probes the MCAST insurance apprenticeship scheme and the impact of apprentices on the local insurance companies, acting as sponsors. This study is of particular relevance since the local insurance firms are experiencing growth but have the challenge of employee turnover and skills shortage. This research study investigates the work-based learning experience of students, the mentoring of apprentices and the supervising procedures adopted by MCAST and the insurance firms. The purpose is to analyse the impact of MCAST trainees on local insurance firms and depict practical recommendations to ameliorate the learning experience of the apprentices. The recommendations emanating from this study, assist MCAST to develop high-performance apprenticeship schemes and assist the local insurance industry, in the recruiting and training of young employees. This qualitative research gathers data through nine in-depth, semi-structured interviews and adopts the Grounded Theory Methodology to address the research problem and attain the stated objectives. The researcher adopts the constructivist approach incorporating an inductive and abductive stance. The findings emanating from the data illustrate the need to promote the insurance industry as a provider of stable and fulfilling careers with the possibility of job mobility. MCAST and the insurance firms need to enhance their collaboration to promote the insurance apprenticeship, among young learners, even at secondary level. An overhaul of the mentoring and supervising approach is needed to provide a work-based learning experience of excellence to MCAST apprentices. MCAST apprenticeship is considered by the insurance executives as the best training opportunity to recruit skilled workers and create networks. The scheme is cost effective to the firms and is considered as a long-term investment in human resources. A well-planned strategy to enhance collaboration and share knowledge between the leading VET provider of the Maltese Islands and the insurance industry is required for the benefit of the apprentices who are the future employees of the local insurance firms.

Mediterranean Cropping Systems: The Importance of Their Economic and Environmental Sustainability

2021 ◽  
Vol 2 (4) ◽  
pp. 1-1
Author(s):  
Maria Pergola ◽  
◽  
Assunta Maria Palese ◽  
Alessandro Persiani ◽  
Pasquale De Francesco ◽  
...  
Keyword(s):  
Environmental Sustainability ◽  
Fossil Fuels ◽  
Raw Materials ◽  
Cropping Systems ◽  
Olive Tree ◽  
Well Being ◽  
C Sequestration ◽  
Agricultural Systems ◽  
The World ◽  
The Impact

The COVID-19 pandemic has drastically changed the lives of people, as well as the production and economic systems throughout the world. The flow of raw materials and products, the supply of labor and manpower, and the purchasing power have all been changed to the detriment of individual health and well-being. Such a situation requires placing even more emphasis on the search for virtuous agricultural systems compatible with the goals of economic and environmental development so clearly defined at the world level in the last decades. The present study aimed to assess the environmental and economic performance of some typical Mediterranean crops grown under different agronomical management regimes, such as strawberry, hazelnut, apricot tree, kiwifruit, peach, olive tree, and grapevine, to emphasize the importance of the mentioned issues even in the current pandemic situation. Life cycle assessment (LCA) was used to investigate the environmental profile of the studied crops, while lifecycle costing (LCC) was performed to assess and compare the economic aspects. From the environmental perspective, the hobby-organic olive systems were the most eco-friendly cropping systems, emitting 0.031 to 0.105 kg CO2eq per kg olives, while the organic hazelnut system had the greatest impact (1.001 kg of CO2eq per kg). Apricot, kiwifruit, and peach systems used N and P inputs most effectively, while strawberry systems efficiently used fossil fuels. Olive HO-2, kiwifruit, and peach cropping systems had the lowest budgets, with the costs amounted to 0.12 € kg-1 per fruit for Olive HO-2 and 0.28 € kg-1 per fruit for both kiwifruit and peach. On the contrary, organic strawberry cultivation was the most expensive (4.77 € kg-1). The variability in results due to the large differences between contexts, such as landscape, technical knowledge, and crop management, characterized the studied agricultural systems. To easily identify sustainability classes and to diminish the impact of farming practices, a considerable effort should be expended to combine LCA with LCC, C sequestration estimates, and some other useful indicators for the environmental quality evaluation.

New Stacked Die Interconnect Technology for High-Performance and Low-Cost FPGA

2015 ◽  
Vol 12 (3) ◽  
pp. 111-117
Author(s):  
Woon-Seong Kwon ◽  
Suresh Ramalingam ◽  
Xin Wu ◽  
Liam Madden ◽  
C. Y. Huang ◽  
...  
Keyword(s):  
High Performance ◽  
Flip Chip ◽  
Process Integration ◽  
Cost Effective ◽  
Design Rule ◽  
Innovative Technology ◽  
Wind Condition ◽  
Wafer Level ◽  
Effective Manner ◽  
Interconnect Technology

This article introduces the first comprehensive demonstration of new innovative technology comprising multiple key technologies for highly cost-effective and high-performance Xilinx field programmable gate array (FPGA), which is so-called stack silicon-less interconnect technology (SLIT) that provides the equivalent high-bandwidth connectivity and routing design-rule as stack silicon interconnect (SSI) technology at a cost-effective manner. We have successfully demonstrated the overall process integration and functions of our new SLIT-employed package using Virtex®-7 2000T FPGA product with chip-to-wafer stacking, wafer-level flux cleaning, microbump underfilling, mold encapsulation, and backside silicon removal. Of all technology elements, both full silicon removal process with faster etching and no dielectric layer damage and wafer warpage management after full silicon etching are most crucial elements to realize the SLIT technology. To manage the wafer warpage after full Si removal, a couple of knobs are identified and used such as top reinforcement layer, microbump underfill properties tuning, die thickness, die-to-die space, and total thickness adjustments. It is also discussed in the article how the wafer warpage behaves and how the wafer warpage is managed. New SLIT module shows excellent warpage characteristics of only −30 μm ∼ −40 μm at room temperature (25°C) for 25 mm × 31 mm in size and +20 μm ∼ +25 μm at reflow temperature (250°C). Thermal simulation results shows that thermal resistance of new SLIT package is almost comparable to that of standard 2000T flip-chip ball grid array (FC-BGA) package using through silicon via interposer with standard heat sink configuration and air wind condition. The reliability assessment is now under the study.

Exploring the Impact of an AVRS Curfew Program on Recidivism of Juvenile Probationers in Korea

2018 ◽  
Vol 62 (14) ◽  
pp. 4425-4444
Author(s):  
Younoh Cho ◽  
Jeff Mellow
Keyword(s):  
Logistic Regression ◽  
Regression Analysis ◽  
Propensity Score Analysis ◽  
Cost Effective ◽  
Monitoring Strategy ◽  
Probation Office ◽  
Score Analysis ◽  
The World ◽  
Juvenile Probationers ◽  
The Impact

Community corrections agencies across the world have adopted biometric technologies as a security tool and cost-effective monitoring strategy. This study investigates the effectiveness of the automated voiceprint recognition supervision (AVRS) curfew program for 386 Korean juvenile probationers from the Seoul Probation Office. Although the AVRS curfew program in Korea has been in effect for more than 14 years, effectiveness of the program has not been fully tested. A propensity score analysis was conducted to assess the effectiveness of the AVRS program, controlling for potential covariates of referring juveniles to the program. Contrary to expectations, a logistic regression analysis demonstrated that the innovative curfew program is a statistically significant factor in increasing the odds of recidivism. The article concludes with a discussion of implications for court-ordered juvenile curfew programs.

scholarly journals Urbanization as a challenge for the food safety of a country

2018 ◽  
pp. 121-128
Author(s):  
Lesya Sheludko
Keyword(s):  
Economic Development ◽  
Food Security ◽  
Economic Security ◽  
Consumer Products ◽  
World Population ◽  
Global Trends ◽  
The World ◽  
Impact Of Urbanization ◽  
High Level ◽  
The Impact

Actuality of the research topic. A number of global trends affects food supply and consumption, as well as food security in the world. The main one is the growth of the world population primarily in emerging countries and urbanization of the population. Accordingly, the topic of food security in the context of urbanization becomes highly relevant. Problem statement. It should be noted, that urbanization changes the quantity and structure of food products, increases the demand for quality products, impacts on food security and economic security of the country in general. Review of recent research and publications. Urbanization is a very complex subject; so many well-known foreign and domestic scientists from different fields of science have studied various aspects of urbanization. At the same time, the vast majority of publications are mostly theoretical and cover the demographic and geographical aspects of urban processes, while the issues of economic analysis and the impact of urbanization on food security remain inadequately studied. Task statement, research methods. The article aims to study the process of urbanization in the world and in Ukraine, as well as to identify the impact of urban processes on the economic development of countries and food security in order to develop recommendations on prospects and opportunities for Ukraine. Presentation of the main material (results of work). The paper describes the main processes of urbanization, which take place in different countries and in the world as a whole, as well as in Ukraine. The influence of urbanization processes on the economic development of the countries is determined, namely, that the countries with high level of urbanization have high economic development and accordingly the high Gross National Product per capita. It has been discovered, that urbanization also affects the food security of countries, as the number of urban population increases, the structure of consumer products changes, and the demand for food increases as well. Summary. Urbanization represents both a challenge and an opportunity for the development of agriculture, as well as food security. Urbanization provides opportunities for Ukraine in the face of growing demand for food, to improve its export potential.

scholarly journals Increasing the attractiveness of investment projects in the mining industry of the Russian Far East

2020 ◽  
Vol 192 ◽  
pp. 03002
Author(s):  
Yuliya Arkhipova ◽  
Rudolf Leontiev
Keyword(s):  
Raw Materials ◽  
Russian Far East ◽  
Far East ◽  
Mining Industry ◽  
Mineral Resources ◽  
Cost Effective ◽  
Federal District ◽  
Investment Projects ◽  
Processing Plants ◽  
The Impact

The article is devoted to the issue of the possibility of economic development of the mining industry in the subjects of the Far Eastern Federal District (FEFD) and the impact of investment projects. With the vast wealth and diversity of mineral resources, their involvement in the national economy is an essential factor in the industrialization and successful development of the regions. In the case of the establishment of processing plants, for a number of minerals, the region could provide its own needs, as well as the countries, finished products from it, and develop an export focus. The article considers the export orientation of the mineral and raw materials complex of Russia and the constituent entities of the Russian Federation, as well as the commodity structure of exports of the regions of the FEFD. Special attention is paid to the implementation of major regional investment projects, which are important for the development of the regions. So, it is proposed to implement a major project in the form of an integrated mining and metallurgical complex due to the fact that the region needs its own ferrous metallurgy. The calculations carried out (in various versions: basic, in the conditions of the territory of advanced development (TAD), without the costs of infrastructure creation) showed that the implementation of the project is cost-effective, but due to the high costs, the support of the state is necessary.

Sign in / Sign up

Export Citation Format

Share Document