scholarly journals Energy Harvesting Using an Analog Circuit under Multimodal Vibration

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Shigeru Shimose ◽  
Kanjuro Makihara ◽  
Junjiro Onoda
Keyword(s):  
Piezoelectric Transducer ◽  
Random Vibration ◽  
Analog Circuit ◽  
Bridge Circuit ◽  
Mechanical Energy ◽  
Mechanical Vibration ◽  
Electrical Energy ◽  
Resonant Frequencies ◽  
Random Forces ◽  
Simple Analog

The efficiency of harvesting energy from a vibrating structure using a piezoelectric transducer and a simple analog circuit is investigated experimentally. This analog circuit was originally invented for a synchronized switch damping on inductor (SSDI) technique, which enhances the damping of mechanical vibration. In this study, the circuit is used to implement a synchronized switch harvesting on inductor (SSHI) technique. A multiple degree of freedom (MDOF) structure is excited by single sinusoidal forces at its resonant frequencies and by random forces. The piezoelectric transducer converts this mechanical energy into electrical energy which is harvested using a standard rectifier bridge circuit with and without our analog circuit. Experimental results show that our analog circuit makes it possible to harvest twice as much energy under both single sinusoidal and random vibration excitations.

Calibration of a Piezoelectric Transducer through Laser Measurements and Numerical Simulation

2019 ◽  
Vol 24 (1) ◽  
pp. 39-48
Author(s):  
SeyedBijan Mahbaz ◽  
Giovanni Cascante ◽  
Maurice B. Dusseault
Keyword(s):  
Numerical Simulation ◽  
Piezoelectric Transducer ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Stress Wave Propagation ◽  
Laser Vibrometer ◽  
Output Displacement ◽  
Displacement Signal ◽  
Non Linear ◽  
Voltage Signal

A piezoelectric transducer is an electromechanical sensor which converts electrical energy (voltage signal) to mechanical energy (displacement signal) and vice versa by taking advantage of the piezoelectric crystal. Depending on the physical combination of transducer parts, sensors may have a linear or non-linear response to the input signal. In seismic tests such as ultrasonic non-destructive testing (NDT) methods, analyzing stress wave propagation through the specimen gives an assessment of its condition. The signal attenuation is an important parameter to assess the condition of specimen which can be done by having the displacement signal as an output. However, instead of the displacement signal, the piezoelectric transducer provides the voltage signal as an output. Therefore, to get reliable and accurate results, it is essential to calibrate the transducers. An appropriate calibration results in a suitable Transfer Function (TF) which can be used to properly calculate the displacement signal. In this study, the output displacement of a 1 MHz piezoelectric transducer is measured using a laser vibrometer with a nanometer resolution. Measurements and calculated TF showed at frequencies of 0.1, 1, and 1.5 MHz, TF values are 0.8, 0.08, and 0.2 respectively which is a non-linear relation between displacement (absolute signal) and voltage (relative signal) as it was expected. Then, numerical simulation is implemented as part of this study to simulate all electrical and mechanical components of the piezoelectric transducer. The simulation was verified with the absolute displacement measurements result from the laser vibrometer.

scholarly journals A review on vibration energy harvesting

2021 ◽  
Vol 245 ◽  
pp. 01041
Author(s):  
Liu Na ◽  
Wan Yuhao ◽  
Han Huanqing ◽  
Liu Tongshuo
Keyword(s):  
Energy Harvesting ◽  
Microelectromechanical Systems ◽  
Mechanical Energy ◽  
Mechanical Vibration ◽  
Electrical Energy ◽  
Easy Access ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Energy Capture ◽  
Future Direction

Vibration energy capture devices can convert the mechanical energy from ambient source into electrical energy. The captured electrical energy can provide energy for low-power devices such as microelectromechanical systems(MEMS) as a supplement to the power system. Vibration energy has been widely concerned by researchers because of the characteristics of easy access and green. The conversion of mechanical vibration energy into electrical energy can be achieved by electromagnetic, electrostatic, piezoelectric, magnetostrictive, dielectric elastomer and emerging friction nano-types. This paper have discussioned some parts of the vibration energy harvesting: collection principle, collection method and the energy storage circuit. At present, the research and design of mechanical vibration energy harvesting structures focus on three aspects: broadening the collection frequency band, collecting dimensions and improving efficiency. Finally, the future direction of energy harvesting research is predicted.

Pulsed Micro Catalytic Combustor for Use in a Solid Piston Microengine

2004 ◽  
Author(s):  
Darren V. Green ◽  
Christopher G. Miller ◽  
Domenic A. Santavicca ◽  
Kendra V. Sharp
Keyword(s):  
Combustion Chamber ◽  
Piezoelectric Transducer ◽  
Catalytic Combustion ◽  
Mechanical Energy ◽  
Temperature Fluctuations ◽  
Electrical Energy ◽  
Pulse Frequency ◽  
Hydrogen Gas ◽  
Penn State ◽  
Catalytic Combustor

In an effort to develop a novel micro power source, the design of a solid piston microengine is introduced. The operational principle of the Penn State Solid Piston (PSSP) is to employ a pulsed catalytic combustion reaction to thermally expand and contract a solid piston connected to a piezoelectric transducer, and in turn use the piezoelectric transducer to convert the mechanical energy of the periodic expansion and contraction of the solid piston (thermal actuator) into electrical energy. The existence of controlled temperature fluctuations within the combustion chamber is critical to the solid piston microengine design. Therefore, the focus of the microcombustor research presented herein is to obtain a consistent and predictable cyclical process leading to predictable temperature fluctuations within the solid piston. Experiments have been conducted using hydrogen gas in a catalytic combustion test rig to quantify the effect of changes in pulse frequency, pulse duty cycle, and equivalence ratio on overall temperature fluctuation and average temperature within the combustion chamber. The percentage of hydrogen consumed within the reaction is also measured.

Flexoelectric energy harvesters based on Timoshenko laminated beam theory

2017 ◽  
Vol 28 (15) ◽  
pp. 2064-2073 ◽  
Author(s):  
Xu Liang ◽  
Runzhi Zhang ◽  
Shuling Hu ◽  
Shengping Shen
Keyword(s):  
Resonance Frequency ◽  
Energy Conversion ◽  
Electromechanical Coupling ◽  
Energy Harvester ◽  
Mechanical Energy ◽  
Mechanical Vibration ◽  
Beam Theory ◽  
Electrical Energy ◽  
Laminated Beam ◽  
Energy Harvesters

Different from piezoelectricity which is restricted to certain materials, flexoelectricity is a universal electromechanical coupling in all dielectrics. In this work, mechanical energy harvester models were developed based on Timoshenko laminated beam theory, in which the flexoelectric and piezoelectric mechanisms were discussed. For a three-layered energy harvester in parallel configuration, the mechanical vibration energy can be converted into electrical energy due to flexoelectricity, and for the three-layered energy harvester in series configuration, the energy conversion is enhanced by the flexoelectricity. Resonance frequency shifts were observed in the calculations due to flexoelectricity and external circuit resistance. It is found that the electromechanical coupling displayed from the electrical responses versus resonance frequency and resistance. The energy conversion for the three-layered energy harvester system was found to be increased with the decrease in the laminated beam thickness. The energy conversion calculated for different numbers of layers also indicates that laminated energy harvester systems excel single-layered energy harvesters. This work therefore might help in designing flexoelectricity-based energy harvesters.

scholarly journals Study on footstep power generation using piezoelectric tile

2019 ◽  
Vol 15 (2) ◽  
pp. 593
Author(s):  
Anis Maisarah Mohd Asry ◽  
Farahiyah Mustafa ◽  
Sy Yi Sim ◽  
Maizul Ishak ◽  
Aznizam Mohamad
Keyword(s):  
Power Generation ◽  
Low Power ◽  
Piezoelectric Transducer ◽  
Mechanical Energy ◽  
Electric Energy ◽  
Electrical Energy ◽  
Piezoelectric Transducers ◽  
Energy Resources ◽  
In Series ◽  
Wasted Energy

<span>Electrical energy is important and had been demand increasingly. A lot of energy resources have been wasted and exhausted. An alternative way to generate electricity by using a population of human had been discovered When walking, the vibration that generates between the surface and the footstep is wasted. By utilizing this wasted energy, the electrical energy can be generated and fulfill the demand. The transducer that use to detect the vibration is a piezoelectric transducer. This transducer converts the mechanical energy into electrical energy. When the pressure from the footstep is applied to the piezoelectric transducer, it will convert the pressure or the force into the electrical energy. The piezoelectric transducer is connected in series-parallel coonection. Then, it is placed on the tile that been made from wood as a model for footstep tile to give pressure to the piezoelectric transducers. This tile can be placed in the crowded area, walking pavement or exercise instruments. The electric energy that generates from this piezoelectric tile can be power up low power appliances.</span>

Reduction of structural vibrations with the piezoelectric stacks ring

2020 ◽  
Vol 64 (1-4) ◽  
pp. 729-736
Author(s):  
Jincheng He ◽  
Xing Tan ◽  
Wang Tao ◽  
Xinhai Wu ◽  
Huan He ◽  
...  
Keyword(s):  
Vibration Control ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Structural Vibrations ◽  
Rotor Systems ◽  
Fea Model ◽  
Piezoelectric Stacks ◽  
Shunt Damping ◽  
Reduction Effect ◽  
Euler Bernoulli Beam

It is known that piezoelectric material shunted with external circuits can convert mechanical energy to electrical energy, which is so called piezoelectric shunt damping technology. In this paper, a piezoelectric stacks ring (PSR) is designed for vibration control of beams and rotor systems. A relative simple electromechanical model of an Euler Bernoulli beam supported by two piezoelectric stacks shunted with resonant RL circuits is established. The equation of motion of such simplified system has been derived using Hamilton’s principle. A more realistic FEA model is developed. The numerical analysis is carried out using COMSOL® and the simulation results show a significant reduction of vibration amplitude at the specific natural frequencies. Using finite element method, the influence of circuit parameters on lateral vibration control is discussed. A preliminary experiment of a prototype PSR verifies the PSR’s vibration reduction effect.

scholarly journals Feasibility study of power generation using a turbine mounted in aircraft wing

2018 ◽  
Vol 7 (2-1) ◽  
pp. 433
Author(s):  
K. Sri Vamsi Krishna ◽  
Shiva Prasad ◽  
R. Sabari Vihar ◽  
K. Babitha ◽  
K Veeranjaneyulu ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Power Systems ◽  
Free Stream ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Aircraft Wing ◽  
Aerodynamic Efficiency ◽  
Turbulent Reynolds Number ◽  
Main Motive ◽  
Emergency Power

The main objective of this study is to increase the aerodynamic efficiency of turbine mounted novel wing. The main motive behind this work is to reduce the drag by attaining the positive velocity gradient and generate power by converting the stagnation pressure which also acts as emergency power source. By using the energy source of free stream air, Mechanical energy is converted into electrical energy. The obtained power is presented in terms of voltage generated at various angles of attack with different Reynolds number. Experimental analysis is carried out for NACA4415 airfoil at various angles with respect to free stream ranging from 0deg to 30deg from laminar to turbulent Reynolds number. The results were obtained using the research tunnel at IARE aerodynamic facility center. The aerodynamic advantage of this design in terms of voltage is 9.5 V at 35m/s which can be utilized for the aircraft on board power systems.

scholarly journals Analisis Pembangkit Listrik Berbasis Flywheel

2019 ◽  
Vol 17 (1) ◽  
pp. 95
Author(s):  
Jumadi Tangko ◽  
Remigius Tandioga ◽  
Ismail Djufri ◽  
Riza Haardiyanti
Keyword(s):  
Power Plant ◽  
Rotational Speed ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Moment Of Inertia ◽  
Mechanical Device ◽  
Load Bearing ◽  
Wheeled Vehicles ◽  
Load Conditions

Flywheel is a rotating mechanical device, which is generally used on four-wheeled vehicles. Flywheel has a moment of inertia that is able to withstand changes in rotational speed. The energy in flywheel is mechanical energy. This mechanical energy will be converted by generators into electrical energy. At the flywheel-based power plant, tests are carried out in the form of rotation, the generator power of the generator under no load or load conditions, and the time needed for this generator to survive. The results showed that the ability of the flywheel-based power plant in the condition without a backup supply to the motor in the condition of a generator without a load is able to generate power of 860.1 W for 22 seconds, while in a load-bearing generator capable of generating electricity by 708.75 W for 18 seconds 

scholarly journals Triboelectric nanogenerators (TENG): Factors affecting its efficiency and applications

2021 ◽  
Vol 34 (2) ◽  
pp. 157-172
Author(s):  
Deepak Anand ◽  
Singh Sambyal ◽  
Rakesh Vaid
Keyword(s):  
Large Scale ◽  
Review Paper ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Wearable Electronics ◽  
Factors Affecting ◽  
Electrostatic Induction ◽  
Triboelectric Nanogenerators ◽  
Human Motions ◽  
Great Scope

The demand for energy is increasing tremendously with modernization of the technology and requires new sources of renewable energy. The triboelectric nanogenerators (TENG) are capable of harvesting ambient energy and converting it into electricity with the process of triboelectrification and electrostatic-induction. TENG can convert mechanical energy available in the form of vibrations, rotation, wind and human motions etc., into electrical energy there by developing a great scope for scavenging large scale energy. In this review paper, we have discussed various modes of operation of TENG along with the various factors contributing towards its efficiency and applications in wearable electronics.

scholarly journals PERANCANGAN SISTEM OTOMATISASI CONTROL MOTOR 3 PHASE MENGGUNAKAN BLUETOOTH BERBASIS ARDUINO UNO

2019 ◽  
Vol 4 (2) ◽  
pp. 50-55
Author(s):  
Syarif Moh Rofiq Al- Ghony ◽  
Subuh Isnur Haryudo ◽  
Jati Widyo Leksono
Keyword(s):  
Control System ◽  
Electric Motor ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Data Capture ◽  
Effective Range ◽  
Effective Distance ◽  
Arduino Uno

The electric motor is a device that serves to transform electrical energy into mechanical energy of motion. In this case the designed control system motor 3 phase by Smartphones through bluetooth network to find out the effective range of extremity. The methods used in the form of data capture of measurement effective range the furthest that can be reached by bluetooth to activate relay SPDT and motor 3 phase. Results of testing the most effective distance of the otomasisasi control system of motor 3 phase maximum as far as 15 meters with a time of pause 0.5 seconds.

Sign in / Sign up

Export Citation Format

Share Document