scholarly journals Evaluation of the Bioenergy Potential of Temer Musa: An Invasive Tree from the African Desert

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Nikdalila Radenahmad ◽  
Md Sumon Reza ◽  
Muhammad Saifullah Abu Bakar ◽  
Shahriar Shams ◽  
Alem Tesfai ◽  
...  
Keyword(s):  
Energy Conversion ◽  
Calorific Value ◽  
Volatile Matter ◽  
Environment Friendly ◽  
Gasification Process ◽  
Invasive Tree ◽  
Wild Tree ◽  
The Usa ◽  
Ash Formation ◽  
Value Measurement

Temer musa (Prosopis chilensis) is an invasive wild tree found in the desert of many countries, e.g., Eritrea, Ethiopia, Sudan, India, South Africa, and the USA. The thermochemical properties of this invasive tree were analyzed as a potential biomass feedstock for energy generation. The calorific value measurement of the temer musa wood was found to be 19.83 MJ/kg. Thermogravimetric analysis and derivative weight profiles displayed that the decomposition happened in four stages representing moisture content, volatile matter, fixed carbon, and ash formation. The proximate parameters are in good range with other known biomasses and are found suitable for the thermochemical energy conversion. The gasification process confirmed the existence of several gases that are usually observed in invasive biomasses. All gasification gases were in the acceptable range, and no hydrogen sulfide gas was observed, which makes the conversion as environment friendly. The obtained results show that the energy conversion of temer musa is suitable for real-time implementation.

scholarly journals Quality assessment of gas produced from different types of biomass pellets in gasification process

2019 ◽  
Vol 38 (2) ◽  
pp. 406-416 ◽  
Author(s):  
Marcel Mikeska ◽  
Jan Najser ◽  
Václav Peer ◽  
Jaroslav Frantík ◽  
Jan Kielar
Keyword(s):  
Gas Turbines ◽  
Combustion Engine ◽  
Calorific Value ◽  
Internal Combustion ◽  
Combustion Gas ◽  
Gas Cleaning ◽  
Gasification Process ◽  
Different Types ◽  
Before And After ◽  
Cleaning Technology

Gas from the gasification of pellets made from renewable sources of energy or from lower-quality fuels often contains a number of pollutants. This may cause technical difficulties during the gas use in internal combustion gas engines used for energy and heat cogeneration. Therefore, an adequate system of gas cleaning must be selected. In line with such requirements, this paper focuses on the characterization and comparison of gases produced from different types of biomass during gasification. The biomass tested was wood, straw, and hay pellets. The paper gives a detailed description and evaluation of the measurements from a fix-bed gasifier for the properties of the produced gases, raw fuels, tar composition, and its particle content before and after the cleaning process. The results of elemental composition, net calorific value, moisture, and ash content show that the cleaned gases are suitable for internal combustion engine-based cogeneration systems, but unsuitable for gas turbines, where a different cleaning technology would be needed.

scholarly journals Green energy technology from buriti (Mauritia flexuosa L. f.) for Brazilian agro-extractive communities

2021 ◽  
Vol 3 (3) ◽  
Author(s):  
Munique Gonçalves Guimarães ◽  
Rafael Benjamin Werneburg Evaristo ◽  
Augusto César de Mendonça Brasil ◽  
Grace Ferreira Ghesti
Keyword(s):  
Lignin Content ◽  
Fixed Bed ◽  
Thermal Conversion ◽  
Volatile Matter ◽  
Matter Content ◽  
Green Energy ◽  
Fixed Bed Reactor ◽  
Gasification Process ◽  
Mauritia Flexuosa ◽  
Immediate Analysis

AbstractThe present work analyzed the energy generation potential of Buriti (Mauritia flexuosa L. f.) by thermochemical reactions. The experimental part of the study performed immediate analyses, elemental analyses, lignocellulosic analysis, thermogravimetric analysis, calorific values, and syn gas concentrations measurements of the gasification of Buriti in a fixed-bed reactor. Additionally, numerical simulations estimated the syn gas concentrations of the gasification reactions of Buriti. The immediate analysis showed that Buriti has the highest ash content (4.66%) and highest volatile matter content (85%) compared to other Brazilian biomass analyzed, but the higher heating value was only 18.28 MJ.kg−1. The elemental analysis revealed that the oxygen to carbon ratio was 0.51 while hydrogen to carbon ratio was 1.74, indicating a good thermal conversion efficiency. The Lignocellulosic analysis of Buriti resulted in a high content of holocellulose (69.64%), a lignin content of 28.21% and extractives content of 7.52%. The thermogravimetry of the Buriti indicated that the highest mass loss (51.92%) occurred in a temperature range between 150 °C and 370 °C. Lastly, the experimental gasification study in a fixed-bed updraft gasifier resulted in syn gas concentrations of 14.4% of CO, 11.5% of CO2 and 17.5% of H2 while the numerical simulation results confirmed an optimal equivalence ratio of 1.7 to maximize CO and H2 concentrations. Therefore, based on the results presented by the present work, the gasification process is adequate to transform Buriti wastes into energy resources. Graphic abstract

Physico-chemical Characterization of Forest and Agricultural Residues for Energy Conversion Processes

2021 ◽  
Vol 37 (1) ◽  
Author(s):  
Nguyen Hong Nam ◽  
Le Gia Thanh Truc ◽  
Khuong Duy Anh ◽  
Laurent Van De Steene
Keyword(s):  
Energy Conversion ◽  
Chemical Characterization ◽  
Calorific Value ◽  
Forest Residues ◽  
Physico Chemical ◽  
Wide Range ◽  
Biomass Resources ◽  
Thermochemical Processes ◽  
The Difference

Agricultural and forest residues are potential sources of renewable energy in various countries. However, the difference in characteristics of biomass resources presents challenges for energy conversion processes which often require feedstocks that are physically and chemically consistent. This study presented a complete and comprehensive database of characteristics of a wide range of agricultural and forest residues. Moisture, bulk density, calorific value, proximate and elemental compositions, as well as cellulose, hemicellulose, and lignin compositions of a wide range of biomass residues were analyzed. The major impacts of the variability in biomass compositions to biochemical and thermochemical processes were also discussed.

scholarly journals Valorization of briquettes fuel using Pinus spp. sawdust from five regions of Mexico

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 2249-2263
Author(s):  
María Alejandra Ramírez-Ramírez ◽  
Artemio Carrillo-Parra ◽  
Faustino Ruíz-Aquino ◽  
Luis Fernando Pintor-Ibarra ◽  
Nicolás González-Ortega ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Impact Resistance ◽  
Resistance Index ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Fixed Carbon ◽  
Volumetric Expansion ◽  
Pinus Spp ◽  
The Impact

This research characterized briquettes made with Pinus spp. sawdust without the use of additives. For this purpose, 19 samples of sawdust from different wood industries located in five states of the Mexican Republic were used. The densification process was carried out in a vertical hydraulic piston laboratory briquette machine. The briquettes were made with 40 g of sawdust, at 50 °C, 20 kPa and pressing for 5 min. The results obtained varied as follows: moisture content (4.1% to 7.2%), density (813.9 to 1,014.4 kg/m3), volumetric expansion (7.4% to 37.3%), compressive strength (4.9 to 40.8 N/mm), impact resistance index (46.7% to 200%), ash (0.1% to 1.1%), volatile matter (82.9% to 90.7%), fixed carbon (8.9% to 16.4%), and calorific value (20.5 to 22.8 MJ/kg). The density of the briquettes was within the “acceptable” classification (800 to 1,200 kg/m3). It was observed that, the higher the density, the lower the volumetric expansion, the higher the compressive strength, and the higher the impact resistance index. According to the ash content, the briquettes could achieve international quality. Due to high volatile matter values, rapid combustion of the briquettes with little generation of toxic smoke would be expected. Fixed carbon and calorific value results were acceptable.

scholarly journals Characteristics of Woody Cutting Waste Briquette with Paper Waste Pulp as Binder

2020 ◽  
Vol 190 ◽  
pp. 00030
Author(s):  
Qurrotin Ayunina Maulida Okta Arifianti ◽  
Azmi Alvian Gabriel ◽  
Syarif Hidayatulloh ◽  
Kuntum Khoiro Ummatin
Keyword(s):  
Moisture Content ◽  
Ignition Time ◽  
Combustion Process ◽  
Calorific Value ◽  
Volatile Matter ◽  
Proximate Analysis ◽  
Hydraulic Press ◽  
Combustion Characteristic ◽  
Paper Waste ◽  
Iron Mold

The current research aimed to increase the calorific value of woody cutting waste briquette with paper waste pulp as binder. There were three different binder variation used in this study, they are 5 %, 10 %, and 15 %. To create a briquette, a cylindrical iron mold with diameter of 3.5 cm and height of 3 cm and a hydraulic press with 2 t power were applied. The physical characteristics of the combination woody waste briquette and paper waste pulp, such as moisture content, ash content, volatile matter and carbon fix were examined using proximate analysis. The calorific value of briquetted fuel was tested by bomb calorimeter. The combustion test was performed to determine the combustion characteristic of briquettes, for example initial ignition time, temperature distribution, and combustion process duration. The general result shows that the calorific value of briquette stood in the range of 4 876 kCal kg–1 to 4 993 kCal kg–1. The maximum moisture content of briquette was 5.32 %. The longest burning time was 105 min.

scholarly journals Potential And Characteristics Of Eichhornia Crassipes Biomass And Municipal Solid Waste As Raw Materials For RDF In Co-Firing Coal Power Plants

2021 ◽  
Vol 926 (1) ◽  
pp. 012009
Author(s):  
S A C R Darmawan ◽  
A L Sihombing ◽  
D G Cendrawati
Keyword(s):  
Municipal Solid Waste ◽  
Solid Waste ◽  
Power Plants ◽  
Eichhornia Crassipes ◽  
Raw Materials ◽  
Calorific Value ◽  
Volatile Matter ◽  
Sample Test ◽  
Value Range ◽  
The Government

Abstract The government has regulated the use of RDF biomass for coal co-firing in power plants. This paper examines biomass (Eichhornia Crassipes and municipal solid waste) characteristics and its potential use as RDF for co-firing in CPP. The method includes the analysis of the composition, supply of raw materials, and biomass characteristics. These results will compare with the coal’s characteristics in CPP. The density of Eichhornia Crassipes in Lake Tondano was 25 kg/m2, with the wet mass of 45,350 tons. The results of the Eichhornia Crassipes sample test for parameters of moisture content, volatile matter, ash content, fix carbon and gross calorific value have a value range of 93%, 5.8-7.1%, 60.21-63.5%, 17.9-22%, 11.4% and 2681-3068 kcal/kg. Amurang CPP uses coal with 4200 kcal/kg calories as much as 1056 tons/day. The co-firing target of 5% requires 52.8 tons of biomass per day. The existing Eichhornia Crassipes biomass in Lake Tondano only supplies the CPP for 62 days. MSW typically has calorific values and moisture with Eichhornia Crassipes biomass, about 3766-4194 kcal/kg and 31.7-87.1%. The use of MSW to cover the lack of Eichhornia Crassipes will ensure the sustainability of the supply of biomass raw materials in the co-firing program at CPP.

scholarly journals Analysis of the Quality of Mixed Coconut Shell Waste Briquettes with Various Biomass Additives as Alternative Fuels

2021 ◽  
Vol 4 (2) ◽  
Author(s):  
Yusraida Khairani Dalimunthe ◽  
Sugiatmo Kasmungin ◽  
Listiana Satiawati ◽  
Thariq Madani ◽  
Teuku Ananda Rizky
Keyword(s):  
Moisture Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Matter Content ◽  
Ash Content ◽  
Coconut Shell ◽  
Bamboo Charcoal ◽  
A Value ◽  
Shell Waste

The purpose of this study was to see the best quality of briquettes from the main ingredient of coconut shell waste<br />with various biomass additives to see the calorific value, moisture content, ash content, and volatile matter<br />content of the biomass mixture. Furthermore, further research will be carried out specifically to see the quality of<br />briquettes from a mixture of coconut shell waste and sawdust. The method used in this research is to conduct a<br />literature study of various literature related to briquettes from coconut shell waste mixed with various additives<br />specifically and then look at the best quality briquettes produced from these various pieces of literature. As for<br />what is determined as the control variable of this study is coconut shell waste and as an independent variable,<br />namely coffee skin waste, rice husks, water hyacinth, Bintaro fruit, segon wood sawdust, coconut husk, durian<br />skin, bamboo charcoal, areca nut skin, and leather waste. sago with a certain composition. Furthermore, this<br />paper also describes the stages of making briquettes from coconut shell waste and sawdust for further testing of<br />the calorific value, moisture content, ash content, volatile matter content on a laboratory scale for further<br />research. From various literatures, it was found that the highest calorific value was obtained from a mixture of<br />coconut shell waste and bamboo charcoal with a value of 7110.7288 cal / gr and the lowest calorific value was<br />obtained from a mixture of coconut shell waste and sago shell waste with a value of 114 cal / gr, then for the value<br />The highest water content was obtained from a mixture of coconut shell waste and rice husk with a value of<br />37.70% and the lowest water content value was obtained from a mixture of coconut shell waste 3.80%, then for the<br />highest ash content value was obtained from a mixture of coconut shell waste and coffee skin with a value of<br />20.862% and for the lowest ash content value obtained from a mixture of coconut shell and Bintaro fruit waste,<br />namely 2%, and for the highest volatile matter content value obtained from a mixture of coconut shell and coconut<br />husk waste with a value of 33.45% and for the value of volatile matter levels The lowest was obtained from a<br />mixture of coconut shell waste and sago skin waste with a value of 33 , 45%.

scholarly journals PERBANDINGAN NILAI BAKAR BRIKET BATUBARA DAN BRIKET ARANG (CAMPURAN CANGKANG BINTARO (Cerbera Manghas) DAN BAMBU BETUNG (Dendrocalamus Asper)

2019 ◽  
Vol 6 (1) ◽  
pp. 1
Author(s):  
Ida Febriana ◽  
Zurohaina Zurohaina ◽  
Sahrul Effendy
Keyword(s):  
Alternative Energy ◽  
Bituminous Coal ◽  
Raw Materials ◽  
Calorific Value ◽  
Volatile Matter ◽  
Carbonization Temperature ◽  
Fixed Carbon ◽  
Alternative Energy Source ◽  
Tapioca Flour ◽  
Cerbera Manghas

Charcoal briquettes are smokeless fuels which are a type of solid fuel whose fly substance is made low enough so that the smoke generated on its utilization will not interfere with health. In this study charcoal briquettes were made from bintaro shell waste and betung bamboo using tapioca flour adhesives. This study aims to obtain the best quality sub-bituminous coal briquettes and coal briquettes. In this study the carbonization temperature used was 400ᵒC and the composition of raw materials for bintaro shells and betung bamboo was 50:50, the composition of raw materials for sub-bituminous coal and straw 90:10. The method used in this research is experiment or experimental method, with fuel value collection using ASTM D5865-03 standard. The results obtained from this study are for charcoal briquettes with 4000C carbonization temperature Inherent Moisture value of 1.91%, ash 2.29%, volatile matter 23.79%, fixed carbon 72.01% and calorific value 5878.7 kal / gr, and for coal briquettes obtained value Inherent Moisture 0.52%, ash 4.42%, volatile matter 17.98%, fixed carbon 77.08% and calorific value 7152.6 kal / gr. The fuel value of coal briquettes is greater than that of charcoal briquettes, but the combustion value of charcoal briquettes includes a good calorific value as an alternative energy source, and is in accordance with the SNI standard of 5000 kal / gr, even close to the Japanese standard 6000 cal / gr. Keywords: Bintaro, briquette, calorific value

scholarly journals Evaluation the energy production potential of aggressively invasive Prosopis juliflora Sw (Fabacea): An emerging threat in the Bundala Ramsar Wetland

2020 ◽  
Author(s):  
W.A.R.T.W. Bandara ◽  
Oshadi Ruwanthika Ranasinghe ◽  
Richard Vlosky
Keyword(s):  
Sri Lanka ◽  
Invasive Plant ◽  
Calorific Value ◽  
Volatile Matter ◽  
Prosopis Juliflora ◽  
Ash Content ◽  
Biomass Ash ◽  
Significant Difference ◽  
Ramsar Wetland ◽  
Level Of Significance

Abstract Prosopis juliflora is an invasive plant species rapidly expanding in the Asian and African continents. Invasion of P. juliflora in Bundala Ramsar Wetland (BRW) in Sri Lanka has created a number of biodiversity and conservation issues. This study was conducted to assess the possibility to utilize this invasive plant as a fuel source for local industries. The moisture content, wood density, ash content, volatile matter, fixed carbon content, biomass/ash ration and calorific value of P. juliflora were measured and compared with Leucaena leucocephala, which is a widely used fuelwood source in Sri Lanka and elsewhere. P. juliflora, performed better than L. leucocephala for most of these parameters. Ash content was comparatively higher in P. juliflora than that of L. leucocephala; however, biomass to ash ratio of P. juliflora was significantly lower (at 0.05 level of significance) than that of L. leucocephala, suggesting its suitability as a fuelwood source. Further, the Fuel Value Index (FVI) of P. juliflora (3,276) was slightly lower than that of L. leucocephala (3,336), a non-significant difference. P. juliflora and L. leucocephala reached Fiber Saturation Point values within drying periods of 24 and 27 days, respectively. According to our estimates of energy properties, 1 Kg of P. juliflora could be used to substitute 0.5 L of diesel and furnace oil as well as 5 kWh (5 units) of electricity. As such, we recommend harvesting P. juliflora from BRW as a potential fuelwood energy source for local industries.

Sign in / Sign up

Export Citation Format

Share Document