scholarly journals Mathematical model of checkweigher with electromagnetic force balance system

ACTA IMEKO ◽  
2014 ◽  
Vol 3 (2) ◽  
pp. 9 ◽  
Author(s):  
Yuji Yamakawa ◽  
Takanori Yamazaki
Keyword(s):  
Dynamic Model ◽  
Measurement System ◽  
Electromagnetic Force ◽  
High Speed ◽  
High Performance ◽  
Mass Measurement ◽  
Conveyor Belt ◽  
Force Balance ◽  
Model Parameters ◽  
Balance System

Our aim was to develop a high-speed and high-accuracy mass measurement system to be used with a conveyor belt (a checkweigher). The objective in this paper was to present a dynamic model of our proposed measurement system. The checkweigher with an electromagnetic force balance system was approximated using a spring-mass-damper system as the physical model, and the equation of motion was derived. The model parameters could be obtained from experimental data. Finally, the validity of the proposed model was confirmed by comparison of the simulation results with the experimental responses. The dynamic model obtained offers practical and useful information to examine the control scheme and to achieve high-performance mass measurement.

SIMPLIFIED DYNAMIC MODEL FOR HIGH-SPEED CHECKWEIGHER

2013 ◽  
Vol 24 ◽  
pp. 1360036 ◽  
Author(s):  
YUJI YAMAKAWA ◽  
TAKANORI YAMAZAKI
Keyword(s):  
Dynamic Model ◽  
Measurement System ◽  
High Speed ◽  
Mass Measurement ◽  
Conveyor Belt ◽  
Open Loop ◽  
Model Parameters ◽  
Proposed Model ◽  
Control Scheme ◽  
Mass Damper

In this paper, we concern with the dynamic behaviors of a high speed mass measurement system with conveyor belt (a checkweigher). The goal of this paper is to construct a simple model of the measurement system so as to duplicate a response of the system. The checkweigher with electromagnetic force compensation can be approximated by the combined spring-mass-damper systems as the physical model, and the equation of motion is derived. The model parameters (a damping coefficient and a spring constant) can be obtained from the experimental data for open-loop system. Finally, the validity of the proposed model can be confirmed by comparison of the simulation results with the realistic responses. The simple dynamic model obtained offers practical and useful information to examine control scheme.

Drag Reduction Performance due to Repetitive Laser Pulses on the Blunt Body

2011 ◽  
Author(s):  
Jae-Hyung Kim ◽  
Akihiro Sasoh
Keyword(s):  
Drag Reduction ◽  
High Speed ◽  
Energy Deposition ◽  
Blunt Body ◽  
Laser Pulses ◽  
Wave Drag ◽  
Force Balance ◽  
Balance System ◽  
Convex Lens ◽  
Wave Drag Reduction

Supersonic wave drag reduction due to the repetitive laser induced energy deposition is performed experimentally in this study. Laser pulses are irradiated through a convex lens installed in side of the in-draft wind tunnel of Mach 1.94. The maximum frequency and power of the energy deposition is limited up to 50kHz and 400W. In order to estimate the drag reduction, time-averaged drag force is measured by a force balance system and stagnation pressure history is synchronized with corresponding sequential schlieren images captured by high-speed camera. Drag reduction performance is linearly increased up to 21% with input laser power. The power gain which only depends on the pulse energy, is realized by approximately 7. Virtual spike formation induced by highrepetitive energy depositions is remarkably discussed in the visualization results.

scholarly journals Measuring Rotor and Blade Dynamics Using an Optical Blade Tip Sensor

1990 ◽  
Author(s):  
Harold R. Simmons ◽  
Douglas L. Michalsky ◽  
Kenneth E. Brewer ◽  
Anthony J. Smalley
Keyword(s):  
Measurement System ◽  
High Speed ◽  
High Performance ◽  
Optical Measurement ◽  
Tip Clearance ◽  
Calibration Data ◽  
Rotor Vibration ◽  
Position Sensing ◽  
Blade Tip ◽  
Blade Tip Clearance

This paper describes an optical measurement system for monitoring combustion turbine blade tips. The sensor measures distance to a blade tip using triangulation of reflected laser light. The system accomplishes triangulation using an optical position sensing device and high speed data acquisition. In this way, it is able to monitor not only average and minimum blade tip clearances, but to monitor the variations of individual blade tip clearances. By appropriate signal processing, it is possible to determine rotor vibration at the probe axial location, variations in shaft DC position, transient losses in blade tip clearance, the potential for tip and seal rubs, vibrations of individual blades in the tangential direction, and rotor torsional vibration at the probe location. Some aspects of blade and torsional vibrations would require more than one probe. The paper presents static calibration data for the measurement system, showing its degree of linearity and range. The paper also presents data obtained on a dynamic blade test rig with tip passing speeds and blade widths comparable to those encountered in high performance industrial combustion turbines. Data from this rig have been processed to show rotor vibration, shift in shaft average position, blade-to-blade tip clearance variation, and variation with speed of minimum blade tip clearance. The measurement system is designed to produce data suitable for use in the monitoring of advanced combustion turbine durability and the diagnosis of turbine functional problems, static and dynamic.

Vacuum System to Minimize the Specimen Contamination of High-Performance EM

1977 ◽  
Vol 35 ◽  
pp. 68-69
Author(s):  
N. Yoshimura ◽  
K. Shirota ◽  
T. Etoh
Keyword(s):  
Electron Microscope ◽  
High Speed ◽  
High Performance ◽  
High Vacuum ◽  
Vacuum System ◽  
Pump System ◽  
Pumping System ◽  
Diffusion Pump ◽  
Almost All ◽  
Cascade Type

One of the most important requirements for a high-performance EM, especially an analytical EM using a fine beam probe, is to prevent specimen contamination by providing a clean high vacuum in the vicinity of the specimen. However, in almost all commercial EMs, the pressure in the vicinity of the specimen under observation is usually more than ten times higher than the pressure measured at the punping line. The EM column inevitably requires the use of greased Viton O-rings for fine movement, and specimens and films need to be exchanged frequently and several attachments may also be exchanged. For these reasons, a high speed pumping system, as well as a clean vacuum system, is now required. A newly developed electron microscope, the JEM-100CX features clean high vacuum in the vicinity of the specimen, realized by the use of a CASCADE type diffusion pump system which has been essentially improved over its predeces- sorD employed on the JEM-100C.

PHAX-SCAN: Functional integration of a Scanning Electron Microscope and an energy-dispersive x-ray analyser

1989 ◽  
Vol 47 ◽  
pp. 56-57
Author(s):  
Marc H. Peeters ◽  
Max T. Otten
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
High Speed ◽  
High Performance ◽  
Functional Integration ◽  
Energy Dispersive ◽  
X Rays ◽  
X Ray ◽  
High Speed Analysis ◽  
Scanning Electron

Over the past decades, the combination of energy-dispersive analysis of X-rays and scanning electron microscopy has proved to be a powerful tool for fast and reliable elemental characterization of a large variety of specimens. The technique has evolved rapidly from a purely qualitative characterization method to a reliable quantitative way of analysis. In the last 5 years, an increasing need for automation is observed, whereby energy-dispersive analysers control the beam and stage movement of the scanning electron microscope in order to collect digital X-ray images and perform unattended point analysis over multiple locations.The Philips High-speed Analysis of X-rays system (PHAX-Scan) makes use of the high performance dual-processor structure of the EDAX PV9900 analyser and the databus structure of the Philips series 500 scanning electron microscope to provide a highly automated, user-friendly and extremely fast microanalysis system. The software that runs on the hardware described above was specifically designed to provide the ultimate attainable speed on the system.

The bright future of digital imaging in scanning electron microscopy

1993 ◽  
Vol 51 ◽  
pp. 768-769
Author(s):  
M. T. Postek ◽  
A. E. Vladar
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Digital Imaging ◽  
High Speed ◽  
High Performance ◽  
Mass Storage ◽  
Analog To Digital ◽  
Central Processing ◽  
Digital Imaging Technology ◽  
Scanning Electron

One of the major advancements applied to scanning electron microscopy (SEM) during the past 10 years has been the development and application of digital imaging technology. Advancements in technology, notably the availability of less expensive, high-density memory chips and the development of high speed analog-to-digital converters, mass storage and high performance central processing units have fostered this revolution. Today, most modern SEM instruments have digital electronics as a standard feature. These instruments, generally have 8 bit or 256 gray levels with, at least, 512 × 512 pixel density operating at TV rate. In addition, current slow-scan commercial frame-grabber cards, directly applicable to the SEM, can have upwards of 12-14 bit lateral resolution permitting image acquisition at 4096 × 4096 resolution or greater. The two major categories of SEM systems to which digital technology have been applied are:In the analog SEM system the scan generator is normally operated in an analog manner and the image is displayed in an analog or "slow scan" mode.

Detection and identification of Catalpol metabolites in the rat plasma, urine and faeces using ultra-high performance liquid chromatography-Q Exactive hybrid quadrupole-orbitrap high-resolution accurate mass spectrometry

2020 ◽  
Vol 21 ◽  
Author(s):  
Zedong Xiang ◽  
Shaoping Wang ◽  
Haoran Li ◽  
Pingping Dong ◽  
Fan Dong ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
High Resolution ◽  
High Performance ◽  
Mass Measurement ◽  
Neutral Loss ◽  
Rat Plasma ◽  
Accurate Mass ◽  
Chromatographic Retention ◽  
Rat Urine ◽  
Q Exactive

Background:: Catalpol, an iridoid glycoside, is one of the richest bioactive components present in Rehmannia glutinosa. More and more metabolites of drugs have exhibit various pharmacological effects, thus providing guidance for clinical application. However, few researches have paid attention on the metabolism of catalpol. Objective:: This study aimed to establish a rapid and effective method to identify catalpol metabolites and evaluate the biotransformation pathways of catalpol in rats. Methods:: In this study, catalpol metabolites in rat urine, plasma and faeces were analyzed by UHPLC-Q-Exactive MS for the characterization of metabolism of catalpol. Based on high-resolution extracted ion chromatograms (HREICs) and parallel reaction monitoring mode (PRM), metabolites of catalpol were identified by comparing the diagnostic product ions (DPIs), chromatographic retention times, neutral loss fragments (NLFs) and accurate mass measurement with those of catalpol reference standard. Results: A total of 29 catalpol metabolites were detected and identified in both negative and positive ion modes. Nine metabolic reactions including deglycosylation, hydroxylation, dihydroxylation, hydrogenation, dehydrogenation, oxidation of methylene to ketone, glucuronidation, glycine conjugation and cysteine conjugation were proposed. Conclusion:: A rapid and effective method based on UHPLC-Q-Exactive MS was developed to mine the metabolism information of catalpol. Results of metabolites and biotransformation pathways of catalpol suggested that when orally administrated, catalpol was firstly metabolized into catalpol aglycone, after which phase Ⅰ and phase Ⅱ reactions occurred. However, hydrophilic chromatography-mass spectrometry still needed to further find the polar metabolites of catalpol.

Performance Analysis of Various Multipliers Using 8T-full Adder with 180nm Technology

2020 ◽  
Vol 13 (6) ◽  
pp. 864-870
Author(s):  
Sai Venkatramana Prasada G.S ◽  
G. Seshikala ◽  
S. Niranjana
Keyword(s):  
Low Power ◽  
Power Dissipation ◽  
High Speed ◽  
High Performance ◽  
Full Adder ◽  
Fundamental Operation ◽  
Wallace Tree ◽  
Power Delay Product ◽  
The Comparative Study ◽  
Wallace Tree Multiplier

Background: This paper presents the comparative study of power dissipation, delay and power delay product (PDP) of different full adders and multiplier designs. Methods: Full adder is the fundamental operation for any processors, DSP architectures and VLSI systems. Here ten different full adder structures were analyzed for their best performance using a Mentor Graphics tool with 180nm technology. Results: From the analysis result high performance full adder is extracted for further higher level designs. 8T full adder exhibits high speed, low power delay and low power delay product and hence it is considered to construct four different multiplier designs, such as Array multiplier, Baugh Wooley multiplier, Braun multiplier and Wallace Tree multiplier. These different structures of multipliers were designed using 8T full adder and simulated using Mentor Graphics tool in a constant W/L aspect ratio. Conclusion: From the analysis, it is concluded that Wallace Tree multiplier is the high speed multiplier but dissipates comparatively high power. Baugh Wooley multiplier dissipates less power but exhibits more time delay and low PDP.

Dynamic model for high-speed rotors based on their experimental characterization

2017 ◽  
Vol 2 (4) ◽  
pp. 25
Author(s):  
L. A. Montoya ◽  
E. E. Rodríguez ◽  
H. J. Zúñiga ◽  
I. Mejía
Keyword(s):  
Dynamic Model ◽  
High Speed ◽  
Natural Frequencies ◽  
Mode Shapes ◽  
Experimental Characterization ◽  
Rotating Systems ◽  
Computing Performance ◽  
The Impact ◽  
Stiffness Distribution ◽  
Good Agreement

Rotating systems components such as rotors, have dynamic characteristics that are of great importance to understand because they may cause failure of turbomachinery. Therefore, it is required to study a dynamic model to predict some vibration characteristics, in this case, the natural frequencies and mode shapes (both of free vibration) of a centrifugal compressor shaft. The peculiarity of the dynamic model proposed is that using frequency and displacements values obtained experimentally, it is possible to calculate the mass and stiffness distribution of the shaft, and then use these values to estimate the theoretical modal parameters. The natural frequencies and mode shapes of the shaft were obtained with experimental modal analysis by using the impact test. The results predicted by the model are in good agreement with the experimental test. The model is also flexible with other geometries and has a great time and computing performance, which can be evaluated with respect to other commercial software in the future.

Sign in / Sign up

Export Citation Format

Share Document