scholarly journals CONTROL METHOD OF PALM OIL’S RAW MATERIALS SUPPLIES TO GUARANTEE THE QUALITY OF THE PRODUCT

2018 ◽  
Vol 1 (2) ◽  
pp. 72-76
Author(s):  
Andira Puspita ◽  
Yuni Rahmawati
Keyword(s):  
Control Method ◽  
Raw Materials ◽  
Science And Technology ◽  
Raw Material ◽  
Selection Of

The current economy has grown rapidly, along with the rapidly growing of Science and Technology (IPTEK). So the competition between companies becomes increasingly tight. The increasingly tight competition of the company encourages each company to determine the selection of raw material inventory appropriately so that the company can still exist in order to achieve its desired goals.

Industrial technologies for processing waste oils

2021 ◽  
pp. 44-57
Author(s):  
L. Stan'kovski ◽  
◽  
V.A. Dorogochinskaya ◽  
B.P. Tonkonogov ◽  
A.A. Molokanov ◽  
...  
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Lubricating Oil ◽  
Yield And Quality ◽  
Waste Oils ◽  
The Russian Federation ◽  
Distillate Fractions ◽  
Material Preparation ◽  
Selection Of

A brief review of the state of collection, disposal and processing of used oils shows the availability of their resource in the country and the main trends in the organization of qualified collection, disposal and processing according to the lubricating oil version. The relevant technologies are given for individual stages and in general for enterprises, the choice of which depends on the quality and characteristics of raw materials. The advantage of the technological scheme, including coagulation purification at the stage of raw material preparation and vacuum distillation with the selection of distillate fractions and the residue, followed by additional purification of the residue, is shown. The use of this technology makes it possible to increase the yield and quality of the target product, which is practically impossible for the raw materials currently available in the Russian Federation using other technologies.

scholarly journals Pemilihan Supplier Sodium Hiroxide Liquid Integrasi Dengan Metode AHP – Topsis

2017 ◽  
Vol 17 (2) ◽  
pp. 62
Author(s):  
Muhamad Munir
Keyword(s):  
Sodium Hydroxide ◽  
Supplier Selection ◽  
Raw Materials ◽  
Raw Material ◽  
Topsis Method ◽  
Synthetic Resins ◽  
Major Supplier ◽  
A Company ◽  
Selection Of

PT. Eterindo Nusa Graha is a company engaged in basic chemical industry that produces synthetic resins and glycerine. One of the raw material for production of synthetic resins is DOP produced 45,000 tons/year. One adjuvant DOP is sodium hydroxide liquid. The raw material is supplied by several companies so that in choosing a major supplier to supply sodium hidroxide is important. Sodium hydroxide liquid supplied by Manunggal indah, Toya indo, and Surya Makmur. In reality the quality of raw materials are sometimes less suitable and delays in delivery have an impact on the production process. So that needs to be measured to determine the supplier's performance. Supplier selection is expected to suit the needs of PT. Eterindo Nusa Graha. This study aims to determine the criteria and sub-criteria supplier selection according to the needs of companies and provides the results of decision-making for the selection of the supplier company. The method used in this study is used AHP weighting of the criteria and sub-criteria and TOPSIS. The results of the research produced 6 criteria and 14 sub-criteria. Of AHP, the weight of the biggest criteria is Quality (0.38651) and Delivery (0.17208), while from TOPSIS method produces major supplier PT. Manunggal indah with positive ideal distance value 0.008558653 and negative ideal distance value 0.04522.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

IMPACT OF INNOVATIVE METHOD OF PREPARING TOBACCO LEAVES FOR DRYING ON THE BASIC PARAMETERS OF QUALITY OF TOBACCO RAW MATERIAL

2019 ◽  
Author(s):  
Е.Е. Ульянченко
Keyword(s):  
Chemical Composition ◽  
Quality Indicators ◽  
Raw Materials ◽  
Raw Material ◽  
Tobacco Leaves ◽  
Commercial Grade ◽  
Innovative Method ◽  
Main Indicator ◽  
Basic Parameters

Исследовано влияние приема прорезания средней жилки на основные качественные показатели табачного сырья. Исследования проводили на листьях основных сортотипов табака Трапезонд и Остролист по массовым ломкам. Прорезание жилки осуществляли на инновационном оборудовании экспериментальном образце линии подготовки листьев табака к сушке ЛПТС360 (ВНИИТТИ, Краснодар). Качество табачного сырья с прорезанной жилкой определяли по товарным сортам, технологическим и курительным свойствам, химическому составу по методикам лабораторного контроля ВНИИТТИ. Инновационный способ подготовки табака к сушке в едином потоке с применением технологического оборудования, включающего прорезатель, выявил положительный технологический результат. Установлена эффективность приема прорезания средней жилки: срок естественной сушки листьев с прорезанной жилкой сократился в 2,5 раза выход 1го товарного сорта сырья составил 74,60 87,93 выход волокна сырья с прорезанной жилкой превышает минимальное значение технологических норм (75) в 1,15 1,26 раз условный расход сырья на единицу курительных изделий меньше норматива на 6 25 улучшен основной показатель химического состава табачного сырья (число Шмука) в 1,6 4,6 раза у сортотипа Трапезонд, в 1,2 1,5 раза у сортотипа Остролист дегустационные свойства сырья не ухудшились. Инновационный способ подготовки листьев табака к сушке, включающий прием прорезания средней жилки, рекомендуется для применения в производстве табачного сырья. The influence of middle vein cutting method on the main quality indicators of tobacco raw materials is studied. Studies were carried out on the leaves of the main varieties of tobacco Trapezond and Ostrolist, on mass breakdowns. Vein cutting was carried out on the innovative equipment of the line of preparation of tobacco leaves for drying LPTS360 (GNU VNIITTI RAA, Krasnodar). The quality of tobacco raw materials with a cut vein was determined by commercial grades, technological and Smoking properties, chemical composition in accordance with the methods VNIITTI. An innovative method of preparing tobacco for drying in a single stream with the use of technological equipment, including a cutter, revealed a positive technological result. The period of natural drying of leaves with cut veins decreased by 2,5 times. The yield of the 1st commercial grade of raw materials was 74,60 87,93. The output of the fiber raw material with cut vein exceeds the minimum value of technological norms (75) in 1,15 1,26 times. Conditional consumption of raw materials per unit of Smoking products is less than the norm by 6 25. The method of cutting the middle vein of the leaves improves the main indicator in the chemical composition of tobacco raw materials (Schmuck ratio) 1,6 4,6 times in the variety Trapezond and 1,2 1,5 times in the variety Ostrolist. The tasting properties of raw materials have not deteriorated. Analysis of raw material quality indicators showed that the innovative method of cutting the middle vein is effective and recommended for use in the production of tobacco raw materials.

scholarly journals TECHNICAL AND TECHNOLOGICAL SOLUTIONS FOR PREPARING FLAX RAW MATERIALS FOR PROCESSING

2021 ◽  
pp. 227-237
Author(s):  
Yu. Вerezovsky ◽  
T. Kuzmina ◽  
M. Yedynovych ◽  
G. Boyko ◽  
N. Lyalina ◽  
...  
Keyword(s):  
Raw Materials ◽  
Hollow Structure ◽  
Weather Conditions ◽  
Raw Material ◽  
Hollow Structures ◽  
Adverse Weather Conditions ◽  
Adverse Weather ◽  
Long Time ◽  
Experimental Researches

The article contains theoretical and experimental researches in the field of the preservation of flax raw material of high moisture content. In the article, factors that are worsening the quality of flax raw material, resulting in non-observance of agrotechnical and technological requirements of preparing, collecting, harvesting the stem material, adverse weather conditions and other factors, are considered. The objective of this paper is to study the influence of preservation agents’ concentrations and of hollow structure device on the quality of flax raw material during long-time storage. In the article, the influence of aqueous preservatives’ concentration, humidity, storage length on the quality of fibrous products, obtained as a result of processing stem material, is analyzed. The influence of the device of hollow structures, as an alternative to preservatives, on the storage process of bast crops stem material was evaluated. The method of flax retted straw storage is described, actions of the main factors influence on the strength of fibers are analyzed. It is demonstrated, that prolongation of flax raw material preservation time can be made by using preservatives without considerable wastes of quality.

scholarly journals Construction sands of Podillya: patterns of distribution, resources and use

2019 ◽  
Vol 27 (3) ◽  
pp. 510-519
Author(s):  
M. Syvyj ◽  
B. Gavrychok
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Simultaneous Increase ◽  
Clay Material ◽  
Material Base ◽  
Resource Base ◽  
Apparent Correlation ◽  
The Baltic ◽  
Further Development

This article presents the characteristics of the resource base of building sands within the three Podillya regions, the patterns of sands distribution, and proposals for increasing the extraction of raw materials . The construction sands of Podillya are confined to the Upper Cretaceous, Neogene and Anthropogenicdeposits. The decrease of the thickness of the sandy strata of the Opilsk Neogene suite in the eastern direction was observed with the simultaneous increase in the thickness of the overlapping strata of the rocks. There is no apparent correlation between the thickness of sandy interlayers and the quality of sands. The interdependence of the chemical composition of Neogene sands and the sand size module is established.The genetic predisposition for the distribution of building sands in different parts of the Podillya territory has been established. Four groups of sand deposits of different age have been identified within the Podillya regions, which contrast sharply with single deposits in the neighbouring territories.There is a very uneven distribution of explored reserves of sandy raw materials across the region and accordingly in the provision of construction sands in the different oblasts /regions of Podillya. The areas best provided with sandy raw materials are the central districts of Ternopil region and Slavutsky district of Khmelnytsky region . Sands of the Baltic stage distributed in Vinnytsia region are mostly poor in quality, clogged with clay material and require enrichment. The further development of the mineral raw material base and the prospects for increasing the production of construction sand in the Podillya regions is associated with the increase in production at the prepared deposits, the commissioning of reserve deposits, the conducting of prospecting and exploration work in the proposed potentially exploitable areas and additional exploration of individual deposits that are exploited. The research allows us to evaluate objectively the existing base of sand raw materials for various purposes in the Podillya region and to develop on this basis measures to increase it. The importance of the study is determined by the acute shortage of the raw material in most administrative districts of Khmelnytsky and Vinnytsia regions, by the growth in the volume of construction work (and accordingly the requirements for sandy raw materials) both in Podillya and in the country.

scholarly journals Selection of Fish Raw Material Suppliers by Integrating ANP and Topsis Methods in CV. Riki Utama Mandiri

2021 ◽  
Vol 1 (2) ◽  
Author(s):  
Aula Fajar Iman Sakti ◽  
Wiwik Sulistiyowati
Keyword(s):  
Supplier Selection ◽  
Raw Materials ◽  
Rank Order ◽  
Raw Material ◽  
Network Process ◽  
The Common ◽  
Common Problems ◽  
Frozen Fish ◽  
A Company ◽  
Selection Of

CV. Riki Utama Mandiri is a company in distributing an economic fish frozen product. This company distributed any kind of retail and wholesaler, both domestic and export. They distributing many frozen fish products variant such as Patin Fillet and Shark Fin. The all raw materials of those frozen seafood was obtained by three different suppliers. The common problems found in CV. Riki Utama Mandiri mostly about raw patin fish supplier which often committed delivery delays.  The purpose of this research is to fixing the supply chain management in deciding the more accurate selections of raw materials supplier. To overcome the common problems that happen. Analytical network process (ANP) will simplify the criteria weight values and sub criteria of each supplier. Meanwhile, technique for others reference by similarity to ideal solution (TOPSIS) method is used for giving a rank order of the alternative supplier. This research is expected for being a consideration for the company in obtaining a good and more effective kind of raw supplier. We also expecting the company for tighten supplier selection more effective way so that it can fullfilled the existing standard. Also to overcome the common problems such as delivery delays, competing raw materials with uncertain quality, and difficulty in sort out the raw materials due to size issues.

scholarly journals technical level of small-town shoemaking in Gdańsk Pomerania in the 14th century

2021 ◽  
Vol 28 ◽  
Author(s):  
Karolina Blusiewicz
Keyword(s):  
Mechanical Treatment ◽  
Professional Knowledge ◽  
The Other ◽  
Raw Material ◽  
Animal Origin ◽  
Late Medieval ◽  
14Th Century ◽  
Purposeful Selection ◽  
Selection Of

Based on the late medieval leather artefacts from Puck, Gniew, Lębork and Chojnice, an attempt was made to assess the level of shoemaking production at that time. Microscopic analyses of leather goods and production waste proved that in the field of tanning the activities related to the mechanical treatment of leather were carefully performed, although with insufficient professional knowledge concerning the process. The results of the identification of the animal origin of the leather confirmed the purposeful selection of raw material with different properties for individual footwear elements and the ability to properly cut it. The quality of the shoemaking products was highly rated in terms of technology and style. However, in the analysed collections a clearly perceptible difference in craftsmanship and assortment of products from Gniew and the other three towns was noticed.

scholarly journals Создание гибридов сверхсахарной кукурузы с высоким уровнем антиоксидантной активности с использованием тест-системы на основе стабильного радикала DPPH

2016 ◽  
pp. 50-56
Author(s):  
В. В. Поздняков ◽  
Ю. В. Харченко ◽  
Л. Я. Харченко ◽  
О. В. Анцыферова
Keyword(s):  
Antioxidant Activity ◽  
Functional Food ◽  
Raw Materials ◽  
Raw Material ◽  
Maize Starch ◽  
Wide Range ◽  
Total Antioxidant ◽  
Index Value ◽  
Canning Industry

Гибриды сахарной и сверхсахарной кукурузы являются хорошим сырьем для производства функциональных пищевых продуктов, в том числе диетического и детского питания. Важными показателями высокого качества этих продуктов являются повышенное содержание белка и ценного масла, незначительное количество плохо усвояемого кукурузного крахмала и высокое содержание антиоксидантов, а также отменные вкусовые качества. В работе представлены данные по оценке антиоксидантной активности большой группы новых перспективных гибридов сверхсахарной кукурузы среднеспелой группы, созданных с целью получения ценных источников сырья для консервной промышленности. Значения показателя общей антиоксидантной активности варьировали в широком интервале значений (от 31,8 % до 60,4 %, 568,4–1008 мкг/г семян), что указывает на перспективность использования этого важного биохимического параметра в селекции сверхсахарной кукурузы на качество. Hybrids of excess sugar maize are good raw material for the production of functional food products, including baby food and diet. Important indicators of high quality of these products are high protein content and a valuable oil, a small amount of poorly digestible maize starch and a high content of antioxidants, and also excellent taste qualities. The paper presents data on the evaluation of the antioxidant activity of a large group of promising new hybrids of excess sugar maize of mid-group created in order to obtain valuable raw materials for the canning industry. Index value of total antioxidant activity varied over a wide range (from 31,8 % to 60,4 %, 568,4–1,008 mg/g of seed), which indicates on promising use of this important parameter in the breeding of biochemical excess sugar maize on quality.

Sign in / Sign up

Export Citation Format

Share Document