scholarly journals Surface quality of products with heterogeneous coatings during mechanical processing

2019 ◽  
Vol 64 (3) ◽  
pp. 263-274
Author(s):  
S. A. Chizhik ◽  
M. L. Kheifetz ◽  
V. I. Borodavko ◽  
S. A. Klimenko ◽  
Yu. A. Melniychuk ◽  
...  
Keyword(s):  
Heterogeneous Material ◽  
High Strength ◽  
Heterogeneous Structure ◽  
Mechanical Processing ◽  
Amorphous Component ◽  
Deformation Hardening ◽  
Partial Crystallization ◽  
Quality Of Products ◽  
Considerable Deformation

It is shown that when machining products from materials with heterogeneous structure, possibilities of management of a condition of a blanket are significantly limited. As an example of management, cutting processing of products from materials with heterogeneous structure – turning of high-strength flame evaporated coverings is considered. Because for an amorphous component of heterogeneous coverings the lack of deformation hardening is peculiar considerable deformation of the cut-off material is observed at their processing and characteristic shaving is formed. Highintensity thermobaric impact on the processed heterogeneous material leads to partial crystallization in a thin blanket with the high content of an amorphous phase. As a result of researches the criterion which quantitatively estimates the statistics, which complexly characterize uniformity of structure of materials and dispersion of their properties, is offered. The criterion allows defining ability of materials to be exposed to cutting without carrying out long experiments.

CONTROL IN REAL TIME THE DENSITY OF PRODUCT AT VARIOUS STAGES OF THE TECHNOLOGICAL PROCESS OF SUGAR PRODUCTION

2020 ◽  
Author(s):  
S.B. Kudryashev ◽  
◽  
N.S. Assev ◽  
R.D. Belashov ◽  
V.A. Naumenko ◽  
...  
Keyword(s):  
Real Time ◽  
Technological Process ◽  
Sugar Industry ◽  
Sugar Production ◽  
Production Processes ◽  
Quality Of Products

The article is devoted to solving one of the most important problems of the development of the sugar industry in Russia – the modernization of sugar production processes. Today, sugar production is actively being modernized, shifting most of its processes to the path of avomatization and optimization to improve the quality of products. This article describes one of the main ways to obtain information about the concentration of sucrose in syrup in the production of sugar.

Агрономическая эффективность промышленной (голландской) технологии возделывания картофеля

2018 ◽  
Author(s):  
C. Coy ◽  
A.V. Shuravilin ◽  
O.A. Zakharova
Keyword(s):  
Heavy Metals ◽  
Regression Analysis ◽  
Positive Response ◽  
Growth Yield ◽  
Correlation And Regression Analysis ◽  
Yield And Quality ◽  
Quality Of Products ◽  
High Degree ◽  
The Impact

Приведены результаты исследований по изучению влияния промышленной технологии возделывания картофеля на развитие, урожайность и качество продукции. Выявлена положительная реакция растений на подкормку K2SO4 в период посадки. Корреляционно-регрессионный анализ урожайности и качества клубней выявил высокую степень достоверности результатов опыта. Содержание нитратов и тяжелых металлов в клубнях было ниже допустимых величин.The results of studies on the impact of industrial technology of potato cultivation on growth, yield and quality of products. There was a positive response of plants to fertilizer K2SO4 in the period of planting. Correlation and regression analysis of yield and quality of tubers revealed a high degree of reliability of the results of experience. The contents of nitrates and heavy metals in tubers was below the permissible values.

PYROMET 600

Alloy Digest ◽  
1969 ◽  
Vol 18 (12) ◽  
Keyword(s):  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nuclear Industry ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Nickel Base

Abstract Pyromet 600 is a corrosion-resisting nickel-base alloy, having a very desirable combination of high strength and workability, both hot and cold. It has high strength and resistance to oxidation at high temperatures. It is designed to meet the highest quality of the nuclear industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-149. Producer or source: Carpenter Technology Corporation.

February 9 — Dentist Day in Russia

2020 ◽  
pp. 78-81
Author(s):  
Oksana Rybachok
Keyword(s):  
Early Childhood ◽  
Oral Cavity ◽  
Salivary Glands ◽  
Spiritual Development ◽  
The Body ◽  
Mechanical Processing ◽  
Normal Functioning ◽  
Digestion Process ◽  
Quality Of Food

«Man is what he eats,» these words belong to the great Pythagoras. He meant by these words the connection of the origin of consumed food with the spiritual development of man. In fact, a lot depends on the nature of nutrition, the quality of food and, of course, on the degree of its perception by the body. Digestion process begins not in the stomach, but directly in the oral cavity as a result of mechanical processing of products with teeth and under the influence of the secretion of the salivary glands. That is why healthy teeth are the key to the normal functioning of the whole organism — people should start taking care of their teeth from the early childhood and dentists, who are far from being beloved by everybody and are often carelessly evaded, are called upon to help keep the teeth healthy.

PENGARUH HARGA DAN KUALITAS PRODUK TERHADAP LOYALITAS PELANGGAN ALUMUNIUM

2019 ◽  
Vol 7 (2) ◽  
Author(s):  
Widodo Widodo ◽  
Marshelly Chandra Kumala
Keyword(s):  
Data Collection ◽  
Product Quality ◽  
Customer Loyalty ◽  
Significant Influence ◽  
Secondary Data ◽  
Primary Data ◽  
Research Results ◽  
Is Research ◽  
Quality Of Products

<em>The objective of this is research was conducted to find out how the influence of the price and quality of products against customer loyalty at PT. Alakasa Extrusindo Jakarta. This research was conducted in Alakasa Extrusindo PT by doing data collection, through the primary data and secondary data.  The research results showed that the simultaneous price variables  and product quality  has a positive and significant effect against the variable customer loyalty. partially showed that price variables has a positive and significant influence towards customer loyalty. And partially showed that product quality variables  has a positive and significant influence towards customer loyalty</em>

Bactericidal activity of drugs from Juglans Regia to the microflora of livestock premises in organic pig breeding

2020 ◽  
pp. 113-122
Author(s):  
Serhii Zinoviev ◽  
Andrii Kurman ◽  
Dmytro Bindiug ◽  
Pavlo Grubich ◽  
Liubov Lepeta
Keyword(s):  
Bactericidal Activity ◽  
Juglans Regia ◽  
Herbal Remedies ◽  
Potential Efficacy ◽  
Internal Structures ◽  
Bactericidal Properties ◽  
Experimental Base ◽  
Quality Of Products ◽  
Gram Positive Cocci

The introduction of the newest technologies of organic pig breeding has the basic principle of minimizing the use in pigs of chemicals, trace amounts of which in pig production adversely affect the quality of products and the health of consumers. The transition to herbal remedies, the maximum possible rejection of chemical synthesis products, is inhibited, in the main, by the relatively small spectrum of plant compounds with the investigated activity. According to the results of previous studies, six working solutions of Juglans regia L phytosupply extracts - potential phytosine disinfectants were developed: To investigate the bactericidal activity of the experimental preparations of Juglans regia, flushes were made from the internal structures and technological equipment of the housing of the pig stock of the experimental base v. Takhtaulove. Obtained samples of typical banal microflora of the pig complex were mixed to obtain a bacterial-containing suspension averaged over the concentration of microbial bodies and the spectrum of types of microflora in the microbiota. When cultured on nutrient media, with the superficial sowing of a suspension of banal microflora of a pig in the presence of a potential phytodisinfectant, processes of development of individual colonies of the microflora are observed. The amount and intensity of their development, the degree of inhibition of life, assess the level of bactericidal activity of the extracts. The highest bactericidal and fungicidal activity, and consequently, the potential efficacy as a possible disinfectant in the technology of organic pig breeding was revealed by the extracts of phytosupply Juglans regia L No. 2 (extractant - acetic acid to 5 %, nut of wax ripeness) and 4 (extractant, alcohol 20 % nutrient wax ripeness (proven after obtaining the primary extract of up to 5 % alcohol), which have bactericidal properties against gram-positive cocci and gram-negative sticks, but have a weak effect on the spore-forming bacilli. Key words: organic pig breeding, bactericidal activity, phyto-disinfectant, commonplace typical microflora of a pig complex, phyto row materials, walnut extract.

Evaluation of quality of welded joints of high-strength railway rails of modern production taking into account the requirements of ukrainian and european standards

2020 ◽  
Vol 2020 (7) ◽  
pp. 2-10
Author(s):  
S.I. Kuchuk-Yatsenko ◽  
◽  
E.V. Antipin ◽  
O.V. Didkovskyi ◽  
V.I. Shvets ◽  
...  
Keyword(s):  
Welded Joints ◽  
High Strength ◽  
European Standards

scholarly journals Assessment of quality of products from polymer materials for machine-building purposes

2020 ◽  
Vol 1614 ◽  
pp. 012044
Author(s):  
D Gramakov ◽  
A Larchenko ◽  
N Filippenko ◽  
A Livshits ◽  
D Bakanin ◽  
...  
Keyword(s):  
Machine Building ◽  
Polymer Materials ◽  
Quality Of Products

scholarly journals Quality Classification of Injection-Molded Components by Using Quality Indices, Grading, and Machine Learning

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 353
Author(s):  
Kun-Cheng Ke ◽  
Ming-Shyan Huang
Keyword(s):  
Machine Learning ◽  
Integrated Circuit ◽  
Quality Indices ◽  
Statistical Process ◽  
Suitable Alternative ◽  
Quality Grading ◽  
Quality Of Products ◽  
The Cost ◽  
Mlp Model

Conventional methods for assessing the quality of components mass produced using injection molding are expensive and time-consuming or involve imprecise statistical process control parameters. A suitable alternative would be to employ machine learning to classify the quality of parts by using quality indices and quality grading. In this study, we used a multilayer perceptron (MLP) neural network along with a few quality indices to accurately predict the quality of “qualified” and “unqualified” geometric shapes of a finished product. These quality indices, which exhibited a strong correlation with part quality, were extracted from pressure curves and input into the MLP model for learning and prediction. By filtering outliers from the input data and converting the measured quality into quality grades used as output data, we increased the prediction accuracy of the MLP model and classified the quality of finished parts into various quality levels. The MLP model may misjudge datapoints in the “to-be-confirmed” area, which is located between the “qualified” and “unqualified” areas. We classified the “to-be-confirmed” area, and only the quality of products in this area were evaluated further, which reduced the cost of quality control considerably. An integrated circuit tray was manufactured to experimentally demonstrate the feasibility of the proposed method.

scholarly journals Manufacturing and development of a bolted GFRP flange joint for oil and gas applications

2021 ◽  
pp. 095440542198951
Author(s):  
Muhsin Aljuboury ◽  
Md Jahir Rizvi ◽  
Stephen Grove ◽  
Richard Cullen
Keyword(s):  
Pressure Vessel ◽  
Oil And Gas ◽  
Polyester Resin ◽  
High Strength ◽  
Adhesively Bonded ◽  
Acceptable Quality ◽  
Composite Pipe ◽  
And Performance ◽  
Composite Pipes

The goal of this experimental study is to manufacture a bolted GFRP flange connection for composite pipes with high strength and performance. A mould was designed and manufactured, which ensures the quality of the composite materials and controls its surface grade. Based on the ASME Boiler and Pressure Vessel Code, Section X, this GFRP flange was fabricated using biaxial glass fibre braid and polyester resin in a vacuum infusion process. In addition, many experiments were carried out using another mould made of glass to solve process-related issues. Moreover, an investigation was conducted to compare the drilling of the GFRP flange using two types of tools; an Erbauer diamond tile drill bit and a Brad & Spur K10 drill. Six GFRP flanges were manufactured to reach the final product with acceptable quality and performance. The flange was adhesively bonded to a composite pipe after chamfering the end of the pipe. Another type of commercially-available composite flange was used to close the other end of the pipe. Finally, blind flanges were used to close both ends, making the pressure vessel that will be tested under the range of the bolt load and internal pressure.

Sign in / Sign up

Export Citation Format

Share Document