scholarly journals Flow Analyzer for Blood Pump

2020 ◽  
Vol 3 (1) ◽  
pp. 44-49
Author(s):  
MARCELO ANTUNES MARCIANO ◽  
Rodrigo Rezer ◽  
Anderson Santos
Keyword(s):  
Low Cost ◽  
Flow Analysis ◽  
Cost Effective ◽  
Clinical Engineering ◽  
Blood Pump ◽  
Engineering Teams ◽  
Control Practice ◽  
Analysis Measurement ◽  
Flow Information ◽  
Operational Failures

Medical equipment that supports life, relieves diseases, and overcomes disabilities can also cause damage and death due to operational failures, user failures, and misuse. Hemodialysis machines include roller pumps that control the flow of blood, and these pumps have to be calibrated accurately to ensure they are working properly. This article describes the development of a low-cost, open source prototype that automates the flow analysis (measurement and recording) of the blood pumps in hemodialysis machines. Being able to accurately inspect the machine’s operation improves the quality and safety of its use. Through this technology (this process automation), it is believed equipment downtime and total tests cost will be reduced. This device has a system that collects data in real time, generated by the blood pump dialysis. Mathematical calculations are used to present flow information, including the standard deviation of the measurement, which is reported at the end of the test in an objective and simple way. Through a software and human machine interface (HMI), the test can be monitored and generate a report that contains the name and model of the equipment, the quantitative results of the flows, and the standard deviations of the measurements. The device can be used by clinical engineering teams in preventive maintenance and after corrective maintenance, as a control practice, making the calibration process easier and more cost-effective.

Performance evaluation of a low-cost odour trap installed in waterless urinals

2016 ◽  
Vol 6 (2) ◽  
pp. 252-258
Author(s):  
S. Ramesh Sakthivel ◽  
Md Azizurrahaman ◽  
V. Ganesh Prabhu ◽  
V. M. Chariar
Keyword(s):  
Low Cost ◽  
Flow Analysis ◽  
Cost Effective ◽  
Particle Flow ◽  
Ammonia Gas ◽  
Maintenance Costs ◽  
Gas Concentration ◽  
Adverse Conditions ◽  
The Past ◽  
Cost Effective Alternative

Waterless urinals save precious fresh water normally used for flushing and reduce odour levels in restrooms. However, existing models of waterless urinals available on the market are expensive and maintenance costs of the odour traps of these urinals are also quite high. Experiments conducted using a low cost membrane-based waterless-urinal odour prevention trap available in India revealed a reduction of over 90.5% in ammonia gas concentration in the urinals. The ammonia levels observed, in the range of 0.22 to 0.30 ppm in waterless urinals fitted with the odour trap evaluated in this study, is comparable to values reported for the widely used sealant liquid based waterless urinals in the past. No sign of clogging was observed in the clogging tests conducted. Passage of particles up to 4 mm in size in the particle flow analysis tests conducted is somewhat higher than the 2 mm reported for sealant liquid and membrane odour traps in previous studies, and it reveals that the odour trap can perform in adverse conditions without getting clogged. Economics of installation and maintenance aspects of waterless urinals carried out here show that the odour trap evaluated in this study can really be a cost effective alternative.

A cost-effective extracorporeal magnetically-levitated centrifugal blood pump employing a disposable magnet-free impeller

2011 ◽  
Vol 225 (12) ◽  
pp. 1149-1157 ◽  
Author(s):  
W Hijikata ◽  
T Mamiya ◽  
T Shinshi ◽  
S Takatani
Keyword(s):  
Degrees Of Freedom ◽  
Low Cost ◽  
Cost Effective ◽  
Magnetic Bearing ◽  
Blood Pump ◽  
Total Power ◽  
Centrifugal Blood Pump ◽  
Total Power Consumption ◽  
Pump Head ◽  
Rotary Blood Pumps

In the field of rotary blood pumps, contactless support of the impeller by a magnetic bearing has been identified as a promising method to reduce blood damage and enhance durability. The authors developed a two-degrees-of-freedom radial controlled magnetic bearing system without a permanent magnet in the impeller in order that a low-cost disposable pump-head for an extracorporeal centrifugal blood pump could be manufactured more easily. Stable levitation and contactless rotation of the ‘magnet-free’ impeller were realized for a prototype blood-pump that made use of this magnetic bearing. The run-out of the impeller position at between 1000 r/min and 3000 r/min was less than 40 µm in the radial-controlled directions. The total power consumption of the magnetic bearing was less than 1 W at the same rotational speeds. When the pump was operated, a flow rate of 5 l/min against a head pressure of 78.66 kPa was achieved at a rotational speed of 4000 r/min, which is sufficient for extracorporeal circulation support. The proposed technology offers the advantage of low-cost mass production of disposable pump heads.

ASSESSMENT OF THE PLATELET COUNT IN THE PREGNANT WOMEN IN IGIMS, PATNA, BIHAR

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Tanwi Singh ◽  
Anshuman Sinha
Keyword(s):  
Platelet Count ◽  
Pregnant Women ◽  
Screening Test ◽  
Low Cost ◽  
Medical Science ◽  
Cost Effective ◽  
Platelet Indices ◽  
Increased Risk ◽  
Low Platelet Count ◽  
Severity Of The Disease

The major risk associated with low platelet count in pregnancy is the increased risk of bleeding during the childbirth or post that. There is an increased blood supply to the uterus during pregnancy and the surgical procedure requires cutting of major blood vessels. Women with thrombocytopenia are at increased risk of losing excessive blood. The risk is more in case of caesarean delivery as compared to vaginal delivery. Hence based on above findings the present study was planned for Assessment of the Platelet Count in the Pregnant Women in IGIMS, Patna, Bihar. The present study was planned in Department of Pathology, Indira Gandhi Institute of Medical Science, Patna, Bihar, India. The present study was planned from duration of January 2019 to June 2019. In the present study 200 pregnant females samples received for the platelet estimation were enrolled in the present study. Clinically platelet indices can be a useful screening test for early identification of preeclampsia and eclampsia. Also platelet indices can assess the prognosis of this disease in pregnant women and can be used as an effective prognostic marker because it correlates with severity of the disease. Platelet count is a simple, low cost, and rapid routine screening test. Hence the data generated from the present study concludes that platelet count can be used as a simple and cost effective tool to monitor the progression of preeclampsia, thereby preventing complications to develop during the gestational period. Keywords: Platelet Count, Pregnant Women, IGIMS, Patna, Bihar, etc.

Janus – A New Approach to Air Combat Pilot Training

2019 ◽  
Vol 2019 (4) ◽  
pp. 7-22
Author(s):  
Georges Bridel ◽  
Zdobyslaw Goraj ◽  
Lukasz Kiszkowiak ◽  
Jean-Georges Brévot ◽  
Jean-Pierre Devaux ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Energy ◽  
Training System ◽  
Embedded Sensors ◽  
Pilot Training ◽  
New Approach ◽  
Combat Aircraft ◽  
Air Combat ◽  
The Cost

Abstract Advanced jet training still relies on old concepts and solutions that are no longer efficient when considering the current and forthcoming changes in air combat. The cost of those old solutions to develop and maintain combat pilot skills are important, adding even more constraints to the training limitations. The requirement of having a trainer aircraft able to perform also light combat aircraft operational mission is adding unnecessary complexity and cost without any real operational advantages to air combat mission training. Thanks to emerging technologies, the JANUS project will study the feasibility of a brand-new concept of agile manoeuvrable training aircraft and an integrated training system, able to provide a live, virtual and constructive environment. The JANUS concept is based on a lightweight, low-cost, high energy aircraft associated to a ground based Integrated Training System providing simulated and emulated signals, simulated and real opponents, combined with real-time feedback on pilot’s physiological characteristics: traditionally embedded sensors are replaced with emulated signals, simulated opponents are proposed to the pilot, enabling out of sight engagement. JANUS is also providing new cost effective and more realistic solutions for “Red air aircraft” missions, organised in so-called “Aggressor Squadrons”.

Motivating Compliance: Firm Response to Mandatory Disclosure Policies

2018 ◽  
Vol 32 (2) ◽  
pp. 103-119
Author(s):  
Colleen M. Boland ◽  
Chris E. Hogan ◽  
Marilyn F. Johnson
Keyword(s):  
Conflict Of Interest ◽  
Low Cost ◽  
Cost Effective ◽  
Data Availability ◽  
Policy Adoption ◽  
Future Research ◽  
Regulated Firms ◽  
Firm Response ◽  
Disclosure Rules ◽  
The Impact

SYNOPSIS Mandatory existence disclosure rules require an organization to disclose a policy's existence, but not its content. We examine policy adoption frequencies in the year immediately after the IRS required mandatory existence disclosure by nonprofits of various governance policies. We also examine adoption frequencies in the year of the subsequent change from mandatory existence disclosure to a disclose-and-explain regime that required supplemental disclosures about the content and implementation of conflict of interest policies. Our results suggest that in areas where there is unclear regulatory authority, mandatory existence disclosure is an effective and low cost regulatory device for encouraging the adoption of policies desired by regulators, provided those policies are cost-effective for regulated firms to implement. In addition, we find that disclose-and-explain regulatory regimes provide stronger incentives for policy adoption than do mandatory existence disclosure regimes and also discourage “check the box” behavior. Future research should examine the impact of mandatory existence disclosure rules in the year that the regulation is implemented. Data Availability: Data are available from sources cited in the text.

Azo (Hydrazone) pigments: general principles

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Robert Christie
Keyword(s):  
High Performance ◽  
Metal Salt ◽  
Low Cost ◽  
Cost Effective ◽  
Precipitation Process ◽  
Ambient Temperatures ◽  
Technical Performance ◽  
Chemical Structures ◽  
General Chemical ◽  
Physical Form

Abstract This paper presents an overview of the general chemical principles underlying the structures, synthesis and technical performance of azo pigments, the dominant chemical class of industrial organic pigments in the yellow, orange, and red shade areas, both numerically and in terms of tonnage manufactured. A description of the most significant historical features in this group of pigments is provided, starting from the discovery of the chemistry on which azo colorants are based by Griess in the mid-nineteenth century, through the commercial introduction of the most important classical azo pigments in the early twentieth century, including products known as the Hansa Yellows, β-naphthol reds, including metal salt pigments, and the diarylide yellows and oranges, to the development in the 1950s and 1960s of two classes of azo pigments that exhibit high performance, disazo condensation pigments and benzimidazolone-based azo pigments. A feature that complicates the description of the chemical structures of azo pigments is that they exist in the solid state as the ketohydrazone rather than the hydroxyazo form, in which they have been traditionally been illustrated. Numerous structural studies conducted over the years on an extensive range of azo pigments have demonstrated this feature. In this text, they are referred to throughout as azo (hydrazone) pigments. Since a common synthetic procedure is used in the manufacture of virtually all azo (hydrazone) pigments, this is discussed in some detail, including practical aspects. The procedure brings together two organic components as the fundamental starting materials, a diazo component and a coupling component. An important reason for the dominance of azo (hydrazone) pigments is that they are highly cost-effective. The syntheses generally involve low cost, commodity organic starting materials and are carried out in water as the reaction solvent, which offers obvious economic and environmental advantages. The versatility of the approach means that an immense number of products may be prepared, so that they have been adapted structurally to meet the requirements of many applications. On an industrial scale, the processes are straightforward, making use of simple, multi-purpose chemical plant. Azo pigments may be produced in virtually quantitative yields and the processes are carried out at or below ambient temperatures, thus presenting low energy requirements. Finally, provided that careful control of the reaction conditions is maintained, azo pigments may be prepared directly by an aqueous precipitation process that can optimise physical form, with control of particle size distribution, crystalline structure, and surface character. The applications of azo pigments are outlined, with more detail reserved for subsequent papers on individual products.

scholarly journals Chemical Modification of Combusted Coal Gangue for U(VI) Adsorption: Towards a Waste Control by Waste Strategy

2021 ◽  
Vol 13 (15) ◽  
pp. 8421
Author(s):  
Yuan Gao ◽  
Jiandong Huang ◽  
Meng Li ◽  
Zhongran Dai ◽  
Rongli Jiang ◽  
...  
Keyword(s):  
Structural Analysis ◽  
High Efficiency ◽  
Low Cost ◽  
Chemical Activation ◽  
Cost Effective ◽  
Coal Gangue ◽  
Order Kinetic ◽  
Practical Applications ◽  
Detailed Structural Analysis ◽  
Alkaline Conditions

Uranium mining waste causes serious radiation-related health and environmental problems. This has encouraged efforts toward U(VI) removal with low cost and high efficiency. Typical uranium adsorbents, such as polymers, geopolymers, zeolites, and MOFs, and their associated high costs limit their practical applications. In this regard, this work found that the natural combusted coal gangue (CCG) could be a potential precursor of cheap sorbents to eliminate U(VI). The removal efficiency was modulated by chemical activation under acid and alkaline conditions, obtaining HCG (CCG activated with HCl) and KCG (CCG activated with KOH), respectively. The detailed structural analysis uncovered that those natural mineral substances, including quartz and kaolinite, were the main components in CCG and HCG. One of the key findings was that kalsilite formed in KCG under a mild synthetic condition can conspicuous enhance the affinity towards U(VI). The best equilibrium adsorption capacity with KCG was observed to be 140 mg/g under pH 6 within 120 min, following a pseudo-second-order kinetic model. To understand the improved adsorption performance, an adsorption mechanism was proposed by evaluating the pH of uranyl solutions, adsorbent dosage, as well as contact time. Combining with the structural analysis, this revealed that the uranyl adsorption process was mainly governed by chemisorption. This study gave rise to a utilization approach for CCG to obtain cost-effective adsorbents and paved a novel way towards eliminating uranium by a waste control by waste strategy.

scholarly journals Platforms for Production of Protein-Based Vaccines: From Classical to Next-Generation Strategies

Biomolecules ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1072
Author(s):  
Raquel Cid ◽  
Jorge Bolívar
Keyword(s):  
Infectious Diseases ◽  
Mammalian Cells ◽  
Vaccine Development ◽  
Low Cost ◽  
Cost Effective ◽  
Insect Larvae ◽  
Subunit Vaccines ◽  
Effective Strategies ◽  
Alternative Systems ◽  
Inactivated Vaccines

To date, vaccination has become one of the most effective strategies to control and reduce infectious diseases, preventing millions of deaths worldwide. The earliest vaccines were developed as live-attenuated or inactivated pathogens, and, although they still represent the most extended human vaccine types, they also face some issues, such as the potential to revert to a pathogenic form of live-attenuated formulations or the weaker immune response associated with inactivated vaccines. Advances in genetic engineering have enabled improvements in vaccine design and strategies, such as recombinant subunit vaccines, have emerged, expanding the number of diseases that can be prevented. Moreover, antigen display systems such as VLPs or those designed by nanotechnology have improved the efficacy of subunit vaccines. Platforms for the production of recombinant vaccines have also evolved from the first hosts, Escherichia coli and Saccharomyces cerevisiae, to insect or mammalian cells. Traditional bacterial and yeast systems have been improved by engineering and new systems based on plants or insect larvae have emerged as alternative, low-cost platforms. Vaccine development is still time-consuming and costly, and alternative systems that can offer cost-effective and faster processes are demanding to address infectious diseases that still do not have a treatment and to face possible future pandemics.

scholarly journals Design Considerations and Selection of Cost-Effective Switched Reluctance Drive for Radiator Cooling Fans

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 917
Author(s):  
Ickjin Son ◽  
Grace Firsta Lukman ◽  
Mazahir Hussain Shah ◽  
Kwang-Il Jeong ◽  
Jin-Woo Ahn
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Magnetic Characteristics ◽  
Switched Reluctance Motors ◽  
Switched Reluctance ◽  
Design Considerations ◽  
Cooling Fan ◽  
Cooling Fans ◽  
Power Switches ◽  
Selection Of

Switched reluctance motors (SRMs) are simple in structure, easy to manufacture, magnet-less, brushless, and highly robust compared to other AC motors which makes them a good option for applications that operate in harsh environment. However, the motor has non-linear magnetic characteristics, and it comes with various pole-phase combinations and circuit topologies that causes many difficulties in deciding on which type to choose. In this paper, the viability of SRM as a low-cost, rugged machine for vehicle radiator cooling fan is considered. First, necessary design considerations are presented, then three commonly use types of SRM are analyzed: A 3-phase 6/4, 3-phase 12/8, and a 4-phase 8/6 to find their static and dynamic characteristics so the most suitable type can be selected. Simulation results show that the 8/6 SRM produces the highest efficiency with less phase current which reduces the converter burden. However, with asymmetric half bridge converter, eight power switches are required for 8/6 SRM and thus put a burden on the overall drive cost. As a solution, the Miller converter with only six switches for four phase SRM. To verify the proposed idea, the 8/6 SRM was manufactured and tested. The results show that Miller converter can be used for the proposed SRM with slightly reduced efficiency at 80.4%.

scholarly journals Kinetics and isotherm modeling of Pb(II) and Cd(II) sequestration from polluted water onto tropical ultisol obtained from Enugu Nigeria

2021 ◽  
Vol 11 (4) ◽  
Author(s):  
Theresa C. Umeh ◽  
John K. Nduka ◽  
Kovo G. Akpomie
Keyword(s):  
Metal Ions ◽  
Low Cost ◽  
Water Environment ◽  
Standard Technique ◽  
Soil Surface ◽  
Cost Effective ◽  
Polluted Water ◽  
Batch Adsorption ◽  
Lead And Cadmium ◽  
Pseudo Second Order

AbstractDeterioration in soil–water environment severely contributed by heavy metal bioavailability and mobility on soil surface and sub-surface due to irrational increase in wastewater discharge and agrochemical activities. Therefore, the feasibility of adsorption characteristics of the soil is paramount in curbing the problem of micropollutant contamination in the farming vicinity. Soil from a farming site in a populated area in Enugu, Nigeria was collected and tested to measure the lead and cadmium contents using atomic absorption spectrophotometer (AAS). The adsorption potency of the ultisol soil was estimated for identifiable physicochemical properties by standard technique. The mean activity concentration of Pb2+ and Cd2+ was 15.68 mg/kg and 3.01 mg/kg. The pH, temperature, metal concentration and contact time adsorptive effect on the Pb2+ and Cd2+ uptake was evaluated by batch adsorption technique. The Langmuir, Freundlich and Temkin models were fitted into equilibrium adsorption data and the calculated results depict a better and satisfactory correlation for Langmuir with higher linear regression coefficients (Pb2+, 0.935 and Cd2+, 0.971). On the basis of sorption capacity mechanism of the soil, pseudo-second-order model best described the kinetics of both metal ions retention process. The results of the present study indicated that the soil being a low cost-effective adsorbent can be utilized to minimize the environmental risk impact of these metal ions.

Sign in / Sign up

Export Citation Format

Share Document