scholarly journals Construction of an experimental apparatus to simulate the greenhouse effect and global warming for educational use

Author(s):  
Paulo Renda Anderson ◽  
Carlos Mergulhão Júnior ◽  
Moacy José Stoffes Junior ◽  
Cléver Reis Stein

This article describes the construction of a complete experimental apparatus to simulate the greenhouse and global warming for educatioal use. These demonstrations are fundamental for people understand the importance of greenhouse effect to keep that life continues on earth and, know about climate change and the causes of global warming. For development of this devise we used an Arduino UNO, temperature and pressure sensors, and low cost products. The experimental results showed that the average atmosphere temperature increases with the increasing concentration of carbon dioxide (CO2). Moreover, this apparatus can be used in classroom to demonstration these important global phenomena.

2021 ◽  
Vol 5 (1) ◽  
pp. 11-16
Author(s):  
Noer Sarifah Ainy ◽  
Nestiyanto Hadi

The earth is experiencing global warming due to an increase in air temperature (greenhouse effect). This is due to the large number of greenhouse gases produced by human activities. In addition, it is also due to the reduced number of plants that absorb greenhouse gases, especially carbon dioxide. This condition causes the study of the greenhouse effect to become an object studied by students at school. Understanding the greenhouse effect is somewhat difficult if only understood in theory. Increasing understanding can be done by making practicum learning media. This study aims to create learning media for the Greenbox Effect Simulator to help understand the concept of the greenhouse effect. The research was conducted using control variables and independent variables (use of plants and without plants). The plants used are Caisim, Sri Gading and Anggrek. The presence of carbon dioxide (CO2) greenhouse gases can be detected by three things, namely changes in the color of the CO2 indicator, changes in temperature, and visibility of the box. The color of the CO2 indicator shows green and green yellow for Box B (with plants) which means the concentration of CO2 in normal conditions. Whereas Box C (without plants) gives a yellow color, which means that the concentration of CO2 is at high conditions. The presence of carbon dioxide gas from combustion will increase the temperature by 1.4 - 1.9 oC in Box C (without plants) and 0.7 - 1.5 oC in Box B (use of plants). The visibility of Box B shows a higher brightness level than Box C. The best plants that can absorb CO2 concentrations are orchids. The ability of orchids to absorb CO2 is assisted by their roots which also function to carry out photosynthesis. The existence of plants functions to absorb CO2 quite well when viewed from changes in temperature, color indicators and visibility.


Atmosphere ◽  
2021 ◽  
Vol 12 (10) ◽  
pp. 1365
Author(s):  
Paulina Poma ◽  
Marco Usca ◽  
María Polanco ◽  
Theofilos Toulkeridis ◽  
Carlos Mestanza-Ramón

The landfill is a final disposal technique to confine municipal solid waste (MSW), where organic matter is degraded generating leachate and biogas composed of methane gases (CH4), carbon dioxide (CO2) and other gases that contribute to global warming. The objective of the current research was to estimate the amount of biogas generated through the LandGEM 3.03 mathematical model to determine the amount of electrical energy generated and the number of homes that would be supplied with electrical energy from 2021 to 2144. As a result of the application, it was estimated that in the Pichacay landfill, the highest point of biogas generation in 2053 would be 76,982,177 (m3/year) that would generate 81,226,339.36 (kWh/year), and would supply 5083 homes with electricity. Similarly, in the Las Iguanas landfill, the highest point would be 693,975,228 (m3/year) of biogas that produces 73,223,5296.7 (kWh/year) and would supply electricity to 45,825 homes. Of the performed gas analyses in the Pichacay landfill in 2020, an average of 51.49% CH4, 40.35% CO2, 1.75% O2 and 17.8% H2S was presented, while in the Las Iguanas landfill, for 2020 and 2021, we obtained an average of 51.88/CH4, 36.62% CO2, 1.01% O2 and 187.58 ppm H2S. Finally, the biogas generated by being harnessed minimizes the impacts related to global warming and climate change and would contribute electricity to the nearby communities.


Author(s):  
Judith S. Weis

What causes global warming or climate change? The burning of fossil fuels emits carbon dioxide into the atmosphere, which results in the greenhouse effect—less heat can be re-radiated away from the earth, thus raising the temperature of the atmosphere and ocean. In the past...


2016 ◽  
Vol 34 (2) ◽  
pp. 190-199 ◽  
Author(s):  
Gerhard Fischer ◽  
Fernando Ramírez ◽  
Fánor Casierra-Posada

The increased concentration of carbon dioxide (CO2) and other greenhouse effect gases has led to global warming, which has resulted in climate change, increased levels of ultraviolet (UV) radiation and changes in the hydrological cycle, affecting the growth, development, production and quality of fruit crops, which undoubtedly will be difficult to predict and generalize because the physiological processes of plants are multidimensional. This review outlines how the effects of high/low solar radiation, temperature, water stress from droughts, flooding and rising levels of CO2 in the atmosphere affect fruit crops and their growth and physiology.


2016 ◽  
pp. 81-84
Author(s):  
András Tamás

In the atmosphere, the amount of carbon dioxide and other greenhouse gases are rising in gradually increasing pace since the Industrial Revolution. The rising concentration of atmospheric carbon dioxide (CO2) contributes to global warming, and the changes affect to both the precipitation and the evaporation quantity. Moreover, the concentration of carbon dioxide directly affects the productivity and physiology of plants. The effect of temperature changes on plants is still controversial, although studies have been widely conducted. The C4-type plants react better in this respect than the C3-type plants. However, the C3-type plants respond more richer for the increase of atmospheric carbon dioxide and climate change.


2019 ◽  
Vol 3 (3) ◽  
Author(s):  
Sri Walyoto

This article analyzes the loss of carbon dioxide (CO2) released in the forest conversion to oil palm plantations. This research data gathered from the relevant secondary data and relate published reports. This research finds that a loss of release of carbon dioxide (CO2) per hectare of US $ 9,800 with a carbon price of USD2 of US $ 14,000 carbon price of USD3 and US $ 19,600 in carbon price of USD4. In addition, this conversion also has a significant impact on global warming (GWP) and global climate change. Keywords: oil palm plantation, CO2 release, GWP, climate change. 


2020 ◽  
Vol 10 (7) ◽  
pp. 2330
Author(s):  
Trinity S. Senda ◽  
Gregory A. Kiker ◽  
Patricia Masikati ◽  
Albert Chirima ◽  
Johan van Niekerk

Smallholder farmers in semi-arid areas depend on both cropping and livestock as the main sources of livelihoods. Rangeland productivity varies on both spatial and temporal scales and provides the major source of feed for livestock. Rangeland productivity is expected to decline with climate change thereby reducing livestock feed availability and consequently livelihoods that depend on livestock. This study was carried out to assess the impacts of climate change on rangeland productivity and consequently livestock population dynamics using a 30-year simulation modeling approach. The climate scenarios used in the simulations are built from the localized predictions by General Circulation Models (GCMs). The primary climate variables under consideration are rainfall (+/−7% change), carbon dioxide (CO2 up to 650 ppm) and temperature (+4 °C change). This was done by applying the SAVANNA ecosystem model which simulates rangeland processes and demographic responses of herbivores on a temporal and spatial scale using a weekly internal time step and monthly spatial and temporal outputs. The results show that rainfall levels of less than 600 mm/year have the largest negative effect on herbaceous biomass production. The amount of biomass from the woody layer does not change much during the year. The carbon dioxide (CO2) effects are more influential on the tree and shrub layers (C3 plants) than the herbaceous layer (C4 grasses). The CO2 effect was more dominant than the effects of rainfall and temperature. In the baseline simulations, the shrub plant layer increased significantly over 30 years while there is a three-fold increase in the woody plant layer (trees and shrubs) where biomass increased from a 1980 production to that of 2010. The biomass of the herbaceous layer was stable over the historical period (1980 to 2010) with values fluctuating between 200 and 400 g/m2. Grass green biomass has a variable distribution where most production occurred in the fields and cleared areas while lower levels of production were found in the forested areas. The spatial distribution of shrub green biomass was less directly linked to yearly rainfall. Shrub biomass was mostly found in forested areas, and it showed a steady increase in production. Cattle, donkey, and goat populations rose slowly from 1980 but the rise was disrupted by a dry period during the late 1980s to the early 1990s causing a decline in all populations primarily due to grass unavailability. The populations of cattle goats and donkeys started to rise again from 1995 onwards due to improvements in rainfall. Cattle and donkey populations were rising faster than that of goats while sheep population was not changing much for most of the simulation period, otherwise they declined significantly during the drought of 2002. Similar changes in simulated grass biomass (g/m2) were observed in almost all climate scenarios, except for the peak and low years. The livestock population simulation showed few variations in livestock population under all scenarios. The main conclusion from the study is that CO2 effects on rangeland productivity are much more dominant than the localized effects of rainfall and temperature. This has implications of favoring the growth of the tree and shrub layers over herbaceous layer, which meant that in the long run, the species that are able to use tree and shrub layers may be kept as a livelihood source as they will have a feed source.


2020 ◽  
Vol 10 (6) ◽  
pp. 2014 ◽  
Author(s):  
Mariano Pierantozzi ◽  
Sebastiano Tomassetti ◽  
Giovanni Di Nicola

The most commonly used refrigerants are potent greenhouse gasses that can contribute to climate change. Hydro-Fluoro-Olefins are low Global Warming Potential fluids. A summary of our experimental research activity on the thermodynamic properties of two environmentally friendly Hydro-Fluoro-Olefins, namely R1234yf and R1234ze(E), is reported. In particular, the measurements were performed with an isochoric apparatus and the apparatus specifically built to reach temperatures down to about 100 K. The data elaboration confirms the validity of the choice and that R1234yf and R1234ze(E) can be adopted in many domestic applications. Moreover, considering the reduction of the flammability issues of R1234yf and R1234ze(E), the properties of binary systems containing these fluids and carbon dioxide were analyzed. The presented mixtures could be very interesting for low-temperature applications such as cascade cycles.


Catalysts ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 413 ◽  
Author(s):  
Silvia Mena ◽  
Iluminada Gallardo ◽  
Gonzalo Guirado

Carbon dioxide (CO2) is a known greenhouse gas, and is the most important contributor to global warming. Therefore, one of the main challenges is to either eliminate or reuse it through the synthesis of value-added products, such as carboxylated derivatives. One of the most promising approaches for activating, capturing, and valorizing CO2 is the use of electrochemical techniques. In the current manuscript, we described an electrocarboxylation route for synthesizing 4-cyanobenzoic acid by valorizing CO2 through the synergistic use of electrochemical techniques (“green technology”) and ionic liquids (ILs) (“green solvents”)—two of the major entries in the general green chemistry tool kit. Moreover, the use of silver cathodes and ILs enabled the electrochemical potential applied to be reduced by more than 0.4 V. The “green” synthesis of those derivatives would provide a suitable environmentally friendly process for the design of plasticizers based on phthalate derivatives.


Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6714
Author(s):  
Rebecca A. Sugrue ◽  
Chelsea V. Preble ◽  
Thomas W. Kirchstetter

The exhaust plume capture method is a commonly used approach to measure pollutants emitted by in-use heavy-duty diesel trucks. Lower cost sensors, if used in place of traditional research-grade analyzers, could enable wider application of this method, including use as a monitoring tool to identify high-emitting trucks that may warrant inspection and maintenance. However, low-cost sensors have for the most part only been evaluated under ambient conditions as opposed to source-influenced environments with rapidly changing pollutant concentrations. This study compared black carbon (BC) emission factors determined using different BC and carbon dioxide (CO2) sensors that range in cost from $200 to $20,000. Controlled laboratory experiments show that traditional zero and span steady-state calibration checks are not robust indicators of sensor performance when sampling short duration concentration peaks. Fleet BC emission factor distributions measured at two locations at the Port of Oakland in California with 16 BC/CO2 sensor pairs were similar, but unique sensor pairs identified different high-emitting trucks. At one location, the low-cost PP Systems SBA-5 agreed on the classification of 90% of the high emitters identified by the LI-COR LI-7000 when both were paired with the Magee Scientific AE33. Conversely, lower cost BC sensors when paired with the LI-7000 misclassified more than 50% of high emitters when compared to the AE33/LI-7000. Confidence in emission factor quantification and high-emitter identification improves with larger integrated peak areas of CO2 and especially BC. This work highlights that sensor evaluation should be conducted under application-specific conditions, whether that be for ambient air monitoring or source characterization.


Sign in / Sign up

Export Citation Format

Share Document