scholarly journals PENERAPAN PEWARNA ALAMI BIJI ALPUKAT PADA KAIN KATUN

2021 ◽  
Vol 7 (2) ◽  
pp. 400
Author(s):  
Sumarli Sumarli
Keyword(s):  
Light Intensity ◽  
Study Design ◽  
Natural Dyes ◽  
Intensity Difference ◽  
Detergent Solution ◽  
Cotton Textile ◽  
Mass Variation ◽  
Textile Materials ◽  
Dyeing Process ◽  
Textile Dyeing

ABSTRAKBiji alpukat dapat diekstrak menjadi zat warna alam karena mengandung senyawa tanin yang dapat menimbulkan warna cokelat atau kecokelatan. Kelemahan zat warna alam dalam proses pewarnaan tekstil yakni memiliki ketahanan luntur yang rendah. Oleh karena itu, pada proses pencelupan bahan tekstil dengan zat warna alam dibutuhkan proses fiksasi agar warna memiliki ketahanan luntur yang baik. Pewarna alami dari biji alpukat telah diterapkan pada kain katun. Ketahanan luntur pewarna alami telah diuji dengan memvariasikan massa tawas sebagai bahan fiksasi terhadap nilai perubahan intensitas cahaya pada air residu hasil pencucian kain katun. Perlakuan menggunakan variasi massa tawas 10g hingga 60g dengan waktu pencelupan selama 10 menit. Desain penelitian terdiri dari ekstraksi biji alpukat sebagai sumber zat warna alam, mordanting dan pencelupan kain katun ke dalam larutan zat warna, fiksasi kain katun, dan pengujian ketahanan luntur warna pada kain katun menggunakan luxmeter setelah pencucian menggunakan air biasa dan air deterjen. Hasil penelitian menunjukkan bahwa sampel yang menggunakan massa tawas 60g menghasilkan tingkat kelunturan warna paling kecil dengan nilai perubahan intensitas cahaya 9,58lux pada hasil pencucian dengan air biasa dan 3,11lux pada hasil pencucian dengan air deterjen. Semakin tinggi massa tawas yang digunakan sebagai bahan fiksasi pada kain katun, maka pewarna alami biji alpukat memiliki ketahanan luntur yang semakin baik. Penggunaan sampel tawas 60g sebagai bahan fiksasi efektif dalam menjaga ketahanan luntur pewarna alami biji alpukat pada kain katun. Kata kunci: Biji Alpukat; Kain Katun; Pewarna Alami; Tawas. ABSTRACTAvocado seeds could be extracted into natural dyes because they contained of tannin. Tannin as a dyes substances would cause brown or brownish color. The weakness of natural dyes in the textile dyeing process that has a low fade resistance. Therefore, the dyeing process of textile materials with natural dyes were needed fixation process in order that color had a well fade resistance. The natural dyes from avocado seeds had been applicated on cotton textile. The fade resistance of natural dyes had been tested by varying the mass of Al2(SO4)3as a fixation to the value of light intensity difference on the residue water of the cotton textile washing. The treatment used the mass variation of 10g to 60g Al2(SO4)3by dyeing for 10 minutes. The study design consisted of avocado seeds extraction as a source of natural dyes, mordanting of cotton textile, dyeing of cotton textile in a dye solution, fixation of cotton textile and test the fade resistance of natural dyes on cotton textile using a luxmeter after washing by water and detergent solution. The results showed that the sample used a mass of 60g Al2(SO4)3produced the smallest color fade degree with the value of light intensity difference on the residue water was 9.58lux of washing by water and 3.11lux of washing by detergent solution. The higher mass of Al2(SO4)3was used as fixation on cotton textile, the natural dyes of avocado seeds had a better fade resistance. The using of 60g Al2(SO4)3sample as a fixation material was effective for kept the fade resistance of natural dyes from avocado seeds on cotton textile. Keywords: Avocado Seeds; Cotton Textile; Natural Dyes.

scholarly journals ВИЗНАЧЕННЯ ВПЛИВУ ПОВЕРХНЕВО-АКТИВНИХ РЕЧОВИН НА ЯКІСТЬ ЗАБАРВЛЕННЯ ЗА МЕХАНІЗМОМ ГЕТЕРОКОАГУЛЯЦІЇ

2020 ◽  
pp. 22-27
Author(s):  
О. О. Гараніна ◽  
Я. В. Редько ◽  
А. С. Корж
Keyword(s):  
Intermolecular Interaction ◽  
Dry Friction ◽  
Practical Importance ◽  
Cotton Textile ◽  
Textile Materials ◽  
Dyeing Process ◽  
Direct Dye ◽  
The Cost ◽  
Structural Heterogeneities

To determine the eff ect of the type and concentration of surfactants on the coloring quality of a water-insoluble analogue of a straight dye of cotton textile materials by the mechanism of heterocoagulation. Method. Heterocoagulation mechanism was used to obtain dyeing of cotton textile materials with water insoluble direct dye form. Sample software was used to determine the color characteristics of colored samples of textile materials. Appropriate standard methods were used to determine the strengths of the obtained colors. Results. The concentrations of surfactant required for the combination of suffi cient intensity of the dyeing with the required strength of the dyeing to dry friction are determined. The analysis of the results shows that not only the particle size but also the nature of the interaction of the dye surfaces and the fi brous material, which is responsible for the depth of the fi rst low of the DLFO theory (Deriagin, Landau, Fairway, Overbeck  theory), is important for heterocoagulation dyeing. Direct dye may be in the form of nanodispersion. In this situation, the diff usion of the dye into amorphous sections of the polymer is excluded. Dyeing is carried out on ly due to heterocoagulation - deposition of dye particles on the surface of the fi brous material. It has been investigated that the dispersion particle deposited on the surface by the mechanism of heterocoagulation is secured by the forces of intermolecular interaction and its stability on the surface is ensured by the balance of the forces of intermolecular interaction and the infl uence of mo lecules of the dispersion medium (Brownian motion eff ect). With the successive reduction of the size of the dye particles to the nanoscale, the infl uence of the forces of intermolecular interaction increases signifi cantly. Practical importance. Reducing the cost of the dyeing process and preventing the detection of structural heterogeneities of textile materials is possible when using a heterocoagulation dyeing mechanism.

scholarly journals Combination of wet fixation and drying treatments to improve dye fixation onto spray-dyed cotton fabric

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Lina Lin ◽  
Wenju Zhu ◽  
Cong Zhang ◽  
Md. Yousuf Hossain ◽  
Zubair Bin Sayed Oli ◽  
...  
Keyword(s):  
Cotton Fabric ◽  
Reactive Dye ◽  
Fixation Time ◽  
Drying Process ◽  
Combined Treatments ◽  
Fixation Rate ◽  
Dyeing Process ◽  
Textile Dyeing ◽  
Color Uniformity ◽  
Four Levels

AbstractThe conventional dyeing process requires a substantial amount of auxiliaries and water, which leaches hazardous colored effluents to the environment. Herein, a newly developed sustainable spray dyeing system has been proposed for cotton fabric in the presence of reactive dyes, which has the potential to minimize the textile dyeing industries environmental impact in terms of water consumption and save significant energy. The results suggest that fresh dye solution can be mixed with an alkali solution before spray dyeing to avoid the reactive dye hydrolysis phenomenon. After that, drying at 60–100 °C, wet fixation treating for 1–6 min, and combined treatments (wet fixation + drying) were sequentially investigated and then dye fixation percentages were around 63–65%, 52–70%, and above 80%, respectively. Following this, fixation conditions were optimized using L16 orthogonal designs, including wet fixation time, temperature, dye concentration, and pH with four levels where the “larger-the-better” function was selected to maximize the dye fixation rate. Additionally, the color uniformity and wash and rubbing fastnesses were at an acceptable level when both treatments were applied. Finally, the dyes were hydrolyzed after wet fixation, and the hydrolysis percentages were enhanced after the drying process.

scholarly journals Application of Natural Dyes and Sodium Alginate From Sargassum Sp. Sea weed In Coloring Bima Woven Fabric

2020 ◽  
Vol 36 (05) ◽  
pp. 964-967
Author(s):  
Agrippina Wiraningtyan ◽  
Ruslan Ruslan ◽  
Putri Ayu Mutmainnah ◽  
Magfirah Perkasa
Keyword(s):  
Surface Structure ◽  
Sodium Alginate ◽  
Morphological Analysis ◽  
Woven Fabrics ◽  
Natural Dyes ◽  
Woven Fabric ◽  
Dyeing Process ◽  
Wave Numbers ◽  
Absorption Pattern ◽  
Before And After

This study aims to extract dye and alginate from seaweed Sargassum sp. as a dye paste in the coloring of Bima woven fabric. The concentration of sodium alginate used was 0%; 1%; 3% and 5%. The results showed that the absorbance value of the dye extract from seaweed Sargassum sp at maximum λ = 203 nm obtained A = 3.899. The effect of variations in the concentration of sodium alginate in the dye paste was determined by comparing the FTIR absorption pattern of Bima woven fabrics. Based on the FTIR absorption pattern data, it was found that a mixture of dye and sodium alginate of 3% had a stronger intensity, namely the wave numbers 3448.72 cm-1 and 1635 cm-1; 2900.94 cm-1; 2337.72 cm-1; 1381.03 cm-1 and 1064.71 cm-1. The results of the morphological analysis showed significant differences in surface structure on Bima woven fabrics before and after the dyeing process.

scholarly journals Reducing Energy and Water Consumption in Textile Dyeing Industry with Cleaner Production by Inlet-Outlet Modification to Reuse Wastewater

2021 ◽  
Vol 58 (S) ◽  
pp. 49-58
Author(s):  
Erkata Yandri ◽  
Rinaldi Idroes ◽  
Roy Hendroko Setyobudi ◽  
Carolus Boromeus Rudationo ◽  
Satriyo Krido Wahono ◽  
...  
Keyword(s):  
Water Consumption ◽  
Initial Conditions ◽  
Cleaner Production ◽  
Second Step ◽  
Similar Action ◽  
The Third ◽  
Dyeing Process ◽  
Modification Process ◽  
Textile Dyeing ◽  
Process Wastewater

Dyeing Finishing (DF) textile industries which consume a lot of energy, chemicals, water, etc., then produce a lot of wastewater which creates significant environmental problems, can be anticipated by applying Cleaner Production. This paper is presented to discuss the technical modification process of dyeing production machines, which reuse process wastewater to save water and energy consumption in the production process. For that reason, there are three steps taken. First, understand the process flow of the textile dyeing industry. Second, understand in detail the dyeing process of the Jet Dyeing (JD) machine. Third, implement steps on the floor, focusing on the JD machine, starting from the initial conditions until the third step. As a result, savings in water consumption per day for 10 JD machines were achieved by almost 50 %, with details; at the initial status 700 000 L, 600 000 L in the first step, 430 000 L in the second step, and finally 400 000 L in the third step. A similar action can be carried out in other processes, such as washing, de-sizing, or in other industries which also consume a lot of water and energy.

scholarly journals An overview of research on plant based natural dyes in Nepal: scope and challenges

2020 ◽  
Vol 3 (2) ◽  
pp. 45-66
Author(s):  
Netra Lal Bhandari ◽  
Basant Pokhrel ◽  
Upashana Bhandari ◽  
Sulakshana Bhattarai ◽  
Anil Devkota ◽  
...  
Keyword(s):  
Research Laboratory ◽  
Biomedical Applications ◽  
Public Awareness ◽  
Natural Dyes ◽  
Synthetic Dyes ◽  
Fastness Properties ◽  
Research Fields ◽  
Dyeing Process ◽  
Wide Range ◽  
Dye Extraction

The worldwide demand of natural dyes is of great interest due to the increased public awareness about the atmospheric and environmental pollution caused by the commercially available synthetic dyes. Nepal being wealthy in flora, would be fine research laboratory land for the plant based natural dyes. Among most of the natural dyes, plant-based dyes/pigments have wide range of applications in fabric, food, drug coloring, therapeutic values and also in solar cells in presence of different mordants. The use of mordant is inevitable during natural dyeing process in order to improve the fastness properties on fabrics, foods and drugs by forming a co-ordination complex with dye. In this article, a short overview of plant based natural dyes extraction applications and their scope and limitations will be discussed with special reference to Nepal. In the present review, the green methods of dye extraction, and dyeing technologies will be discussed, and the research fields based on natural dyes will be explored. Some of the natural dyes has also shown the antimicrobial, antioxidant, antifungal properties and hence are also discussed with biomedical applications.  

X-Ray Fluorescence in Cotton Modification Research

1964 ◽  
Vol 8 ◽  
pp. 456-461
Author(s):  
Donald Mitcham ◽  
Biagio Piccolo ◽  
Verne W. Tripp ◽  
Robert T. O’Connor
Keyword(s):  
Quantitative Analysis ◽  
Cotton Textile ◽  
Qualitative And Quantitative Analysis ◽  
X Ray ◽  
Textile Materials ◽  
Qualitative And Quantitative ◽  
Chemically Modified ◽  
Elapsed Time

AbstractThe application of X-ray fluorescence to the qualitative and quantitative analysis of chemically modified cotton textile materials is described. The scope and flexibility of the technique have permitted the determination of more than 20 elements with, greatly reduced elapsed time compared with the corresponding spectroscopic or wet methods. Precautions to be observed in preparing standards are discussed. Results of the analysis of typical modifications and their significance in the development of cottons for specific uses are described.

scholarly journals Adsorption Properties of β- and Hydroxypropyl-β-Cyclodextrins Cross-Linked with Epichlorohydrin in Aqueous Solution. A Sustainable Recycling Strategy in Textile Dyeing Process

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 252 ◽  
Author(s):  
José Pellicer ◽  
María Rodríguez-López ◽  
María Fortea ◽  
Carmen Lucas-Abellán ◽  
María Mercader-Ros ◽  
...  
Keyword(s):  
Advanced Oxidation Process ◽  
Industrial Effluents ◽  
Second Order ◽  
Point Of View ◽  
Maximum Adsorption Capacity ◽  
Gravimetric Analysis ◽  
Dyeing Process ◽  
Textile Dyeing ◽  
Recycling Economy ◽  
Pseudo Second Order

β-cyclodextrin (β-CD) and hydroxypropyl-β-cyclodextrin (HP-β-CD) were used to prepare insoluble polymers using epichlorohydrin as a cross-linking agent and the azo dye Direct Red 83:1 was used as target adsorbate. The preliminary study related to adsorbent dosage, pH, agitation or dye concentration allowed us to select the best conditions to carry out the rest of experiments. The kinetics was evaluated by Elovich, pseudo first order, pseudo second order, and intra-particle diffusion models. The results indicated that the pseudo second order model presented the best fit to the experimental data, indicating that chemisorption is controlling the process. The results were also evaluated by Freundlich, Langmuir and Temkin isotherms. According to the determination coefficient (R2), Freunlich gave the best results, which indicates that the adsorption process is happening on heterogeneous surfaces. One interesting parameter obtained from Langmuir isotherm is qmax (maximum adsorption capacity). This value was six times higher when a β-CDs-EPI polymer was employed. The cross-linked polymers were fully characterized by nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA). Also, morphology and particle size distribution were both assessed. Under optimized conditions, the β-CDs-EPI polymer seems to be a useful device for removing Direct Red 83:1 (close 90%), from aqueous solutions and industrial effluents. Complementarily, non-adsorbed dye was photolyzed by a pulsed light driven advanced oxidation process. The proposed methodology is environmental and economically advantageous, considering the point of view of a sustainable recycling economy in the textile dyeing process.

Extraction of natural dyes for textile dyeing from coloured plant wastes released from the food and beverage industry

2005 ◽  
Vol 86 (2) ◽  
pp. 233-242 ◽  
Author(s):  
Thomas Bechtold ◽  
Rita Mussak ◽  
Amalid Mahmud-Ali ◽  
Erika Ganglberger ◽  
Susanne Geissler
Keyword(s):  
Natural Dyes ◽  
Beverage Industry ◽  
Food And Beverage Industry ◽  
Textile Dyeing ◽  
Food And Beverage

In Situ Measurement of Reactive Dye Concentration Using Optical Fibre Sensing System

2011 ◽  
Vol 332-334 ◽  
pp. 1864-1867 ◽  
Author(s):  
Jun Ying Tian ◽  
Xiao Ming Zhao ◽  
Jian Fei Zhang
Keyword(s):  
Optical Fibre ◽  
Reactive Dye ◽  
Measured Data ◽  
Monitoring And Control ◽  
Monitoring And Control System ◽  
Sensing System ◽  
Dyeing Process ◽  
Textile Dyeing ◽  
And Control

To develop an online monitoring and control system for textile dyeing process, an optical fibre sensing system was designed and developed. This paper focused on the measurement of reactive dye concentration in dyebath using the optical fibre sensing system. The optical fibre sensors were proved to be practicable to measure the dye concentration in the dye concentration range during the dyeing process. The measured data was compared with the calculated value, and the linear relation of absorbance to dye concentration was examined. The experiment included single dyes and mixture with double dyes. Dyes concentration measurement accuracy was discussed. The results show that the absorbance is proportional to dye concentration within actual dyeing concentration range. Measured data of dyes concentration well matched the calculated value. The limitations and the approach for improving this optical fibre sensing system were discussed.

Sign in / Sign up

Export Citation Format

Share Document