scholarly journals ANALISIS PENGARUH PENAMBAHAN LIMBAH KARET TERHADAP DURABILITAS DAN FLEXIBILITAS ASPAL BETON (AC-WC)

2019 ◽  
Vol 7 (2) ◽  
Author(s):  
Redaksi Tim Jurnal
Keyword(s):  
Plastic Deformation ◽  
Asphalt Mixture ◽  
Normal Mixtures ◽  
Road Pavement ◽  
Rubber Waste ◽  
High Durability ◽  
Highway Planning ◽  
Waste Mixture ◽  
Marshall Stability ◽  
Aggregate Material

Availability of roads is an absolute prerequisite for the entry of investment into a region, for this reason it is necessary to plan strong, durable and high durability pavement for plastic deformation. Damage in Indonesia is generally caused by excessive loading. The cause of damage to this pavement requires the use of material for higher quality road pavement in the form of aggregate material as a filler and asphalt as a binder. The addition of rubber waste to the concrete asphalt mixture is a solution for highway planning and reducing pollution of rubber waste produced by rubber factories. From the results of the addition of rubber waste mixture affect the flexibility and durability of asphalt, Marshall Quotien value and residual Marshall Stability that affect flexibility and durability when compared with normal mixtures decreased, the decrease in value was due to the number of cavities in the test object mixed with rubber waste. From the results of the mixture of rubber waste produced an optimization value on Marshall stability in the percentage of 6% rubber waste of 93.68% and Marshall Quotien in the percentage of 6% rubber waste of 272.20 kg / mm.

scholarly journals Increasing the Stability of Asphalt Concrete Mixture Using Crumb Rubber

2021 ◽  
Vol 328 ◽  
pp. 10002
Author(s):  
Fajar Romadhon ◽  
Agata Iwan Candra ◽  
Dwifi Aprillia Karisma ◽  
Muhammad Heri Nastotok ◽  
Rendy Kurnia Dewanta ◽  
...  
Keyword(s):  
Asphalt Concrete ◽  
Asphalt Mixture ◽  
Road Construction ◽  
Crumb Rubber ◽  
Concrete Mixture ◽  
Road Pavement ◽  
Road Users ◽  
Concrete Mixtures ◽  
The Stability ◽  
Marshall Stability

Stability is a measure of the strength of an asphalt mixture in resisting deformation due to loading. If a road construction structure cannot withstand the existing load, it will result in road damage that endangers road users. This study aims to improve the stability of the asphalt concrete mixture with the use of crumb rubber. Crumb rubber is used because it has good resistance and elasticity. The research was conducted experimentally by making test objects in the laboratory. In this study, five variations crumb rubber (2%, 4%, 6%, 8%, and 10% of the weight asphalt mixture) were carried out with the size of the powder retained on a 40 sieve. Marshall test and analysis of volumetric was carried out to determine the characteristics of the asphalt-concrete mixture. The results showed that the highest Marshall stability was obtained at 10% crumb rubber with a stability value of 1422 kg. The use of rubber powder can significantly increase the strength and quality of the asphalt-concrete mixture. Thus, crumb rubber can be used, and this percentage can be used as a reference in the manufacture of asphalt-concrete mixtures in order to obtain good road pavement quality.

scholarly journals THE STUDY ON UTILIZATION WASTE TIRE SEEDS AS AMIXTURE OF AC-WC ASPHALT ON ROAD PAVEMENT

Jurnal CIVILA ◽  
2021 ◽  
Vol 6 (2) ◽  
pp. 257
Author(s):  
Fauzan Adzim ◽  
Zulkifli Lubis ◽  
Bobby Damara
Keyword(s):  
Hot Mix Asphalt ◽  
Asphalt Mixture ◽  
General Effect ◽  
Waste Tire ◽  
Road Pavement ◽  
Marshall Stability

The purpose of this study are to find out the process of making AC-WC asphalt by using waste tire ore as an additives to hot mix asphalt and also to find out the general effect of waste tire ore as additives in the asphalt mixture to the characteristics of AC-WC asphalt. [2].In this study, the variation of the mixture added with tire ore starting from 0%, 3%, 6% and 8% addition of tire ore waste for the highest variation value is 3%, stability value is 494.99 kg, Voids Filled With Asphalt’s value is 68,40%, value of Voids in Mix is 3.65%, flow value is 3,21 %, value of Marshall Quotient is 154,61 kg/mm, Density’s value is 2,29 gr/cc. Finally, it was concluded that the addition of waste tire ore is not in accordance with SNI 06-2489-1991 because the higher percentage value in the mixture will decrease the value of Marshall Stability.

scholarly journals Evaluation of the Effects of Filler Fineness on the Properties of an Epoxy Asphalt Mixture

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2003
Author(s):  
Wei Xu ◽  
Jintao Wei ◽  
Zhengxiong Chen ◽  
Feng Wang ◽  
Jian Zhao
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
Asphalt Mixture ◽  
Average Particle ◽  
Fine Dust ◽  
Bonding Structure ◽  
Epoxy Asphalt ◽  
Mineral Powder ◽  
Marshall Stability ◽  
Mixture Sample

The type and fineness of a filler significantly affect the performance of an asphalt mixture. There is a lack of specific research on the effects of filler fineness and dust from aggregates on the properties of epoxy asphalt (EA) mixtures. The effects of aggregate dust and mineral powder on the properties of an EA mixture were evaluated. These filler were tested to determine their fineness, specific surface area and mineral composition. The effects of these fillers on the EA mastic sample and mixture were evaluated. The morphology of the EA mastic samples was analyzed using scanning electron microscopy (SEM). The effects of the fillers on the Marshall stability, tensile strength and fatigue performance of the EA mixture were evaluated. The dust from the aggregates exhibited an even particle size distribution, and its average particle size was approximately 20% of that of the mineral powder. The SEM microanalysis showed that the EA mastic sample containing relatively fine dust formed a tight and dense interfacial bonding structure with the aggregate. The EA mixture sample containing filler composed of dust from aggregate had a significantly higher strength and longer fatigue life than that of the EA sample containing filler composed of mineral powder.

scholarly journals Analysis of the Correlation between the Static and Fatigue Test Results of the Interlayer Bondings of Asphalt Layers

2016 ◽  
Vol 62 (1) ◽  
pp. 83-98 ◽  
Author(s):  
A. Szydło ◽  
K. Malicki
Keyword(s):  
Fatigue Life ◽  
Fatigue Test ◽  
Asphalt Mixture ◽  
Fatigue Tests ◽  
Test Results ◽  
Static Tests ◽  
Bonding State ◽  
Road Pavement ◽  
The Future ◽  
Pavement Structure

Abstract The bonding state of the asphalt layers in a road pavement structure significantly affects its fatigue life. These bondings, therefore, require detailed tests and optimization. In this paper, the analyses of the correlation between the results of laboratory static tests and the results of fatigue tests of asphalt mixture interlayer bondings were performed. The existence of the relationships between selected parameters was confirmed. In the future, the results of these analyses may allow for assessment of interlayer bondings’ fatigue life based on the results of quick and relatively easy static tests.

Performance Characterization of Stone Mastic Asphalt using Steel Fiber

2021 ◽  
Vol 02 (02) ◽  
Author(s):  
Ekarizan Shaffie ◽  
◽  
H.A. Rashid ◽  
Fiona Shiong ◽  
Ahmad Kamil Arshad ◽  
...  
Keyword(s):  
Steel Fiber ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Moisture Susceptibility ◽  
Mastic Asphalt ◽  
Bitumen Content ◽  
Stone Mastic Asphalt ◽  
The Stability ◽  
Marshall Stability

Stone Mastic Asphalt (SMA) is a gap-graded hot mixture designed to provide higher resistance towards permanent deformation and rutting potential by 30% to 40% more than dense-graded asphalt, due to its stable aggregate skeleton structure. However, compared to other types of hot mix asphalt, SMA unfortunately has some shortcomings in term of its susceptibility towards moisture-induced damage due to its structure and excessive bitumen content in the composition. This research aims to assess the performance of a SMA mixture with steel fiber by enhancing overall stability, abrasion resistance, and, most importantly, moisture susceptibility. This study involved the incorporation of various steel fiber proportions of 0%, 0.3%, 0.5% and 0.7% by the total weight of mixture. The steel fiber modified SMA was made up of 6.0% PEN 60/70 bitumen content. The performance of SMA were evaluated through Marshall stability and flow test, Cantabro loss test and indirect tensile strength test. The results obtained from the testing showed that the incorporation of steel fiber is significantly effective to enhance the resistance towards moisture damage, while increasing the stability and reducing the abrasion loss of SMA mixture, compared to conventional mixture. Overall, it can be concluded that the addition of steel fiber in asphalt mixture specifically SMA, has improved the mechanical performance in the application of asphalt pavement with the optimum steel fiber proportion of 0.3% by the weight of mixture. The developed models between the independent variables and responses demonstrated high levels of correlation. The study found that Response Surface Methodology (RSM) is an effective statistical method for providing an appropriate empirical model for relating parameters and predicting the optimum performance of an asphaltic mixture to reduce flexible pavement failure.

Determining Optimum Carbon Nanotubes Content for Asphalt Mixture in Road Pavements

2021 ◽  
Vol 1023 ◽  
pp. 121-126
Author(s):  
Van Bach Le ◽  
Van Phuc Le
Keyword(s):  
Carbon Nanotubes ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Construction Cost ◽  
Asphalt Mixtures ◽  
Static Modulus ◽  
Pavement Construction ◽  
Modified Binder ◽  
Marshall Stability

Although small amount of binder in asphalt concrete mixture may commonly range from 3.5 to 5.5% of total mixture as per many international specifications, it has a significant impact on the total cost of pavement construction. Therefore, this paper investigated the effects of five carbon nanotubes contents of 0.05%, 0.1%, 0.15%, 0.2%, 0.25% by asphalt weight as an additive material for binder on performance characteristics of asphalt mixtures. Performance properties of CNTs modified asphalt mixtures were investigated through the Marshall stability (MS) test, indirect tensile (IDT) test, static modulus (SM) test, wheel tracking (WT) test. The results indicated that asphalt mixtures with CNT modified binder can improve both the rutting performance, IDT strength and marshall stability of tested asphalt mixtures significantly at higher percentages of carbon nanotubes. However, the issue that should be considered is the construction cost of asphalt pavement. Based on the asphalt pavement structural analysis and construction cost, it can be concluded that an optimum CNT content of 0.1% by asphalt weight may be used as additive for asphalt binder in asphalt mixtures.

scholarly journals Pengaruh Penambahan Limbah Plastik Jenis Thermosetting Terhadap Parameter Marshall Laston AC-WC

2019 ◽  
Vol 24 (2) ◽  
pp. 166
Author(s):  
Kusdiyono Kusdiyono ◽  
Supriyadi Supriyadi ◽  
Tedjo Mulyono ◽  
Sukoyo Sukoyo
Keyword(s):  
Asphalt Concrete ◽  
Plastic Waste ◽  
Concrete Mixture ◽  
Partial Replacement ◽  
Short Term ◽  
Road Pavement ◽  
Long Run ◽  
Plastic Bag ◽  
Marshall Stability ◽  
The Impact

At present, plastic is a material that is needed by the community at large, where the impact is also very extraordinary after the plastic is used in everyday life which can cause serious problems if the management is not done properly. The problem of plastic waste does not only occur in the city of Semarang, but also in other cities, so that the Ministry of Environment and Forestry has implemented a paid plastic bag program in the short term. But this is only to deal with problems in the short term. In the long run, it will not solve the problem of "plastic waste", because the policy actually encourages people to buy plastic which, of course, will add a new burden for the community to buy it. Based on the above problems, it is necessary to utilize this plastic waste to be made into road pavement materials such as in the manufacture of Asphal Concrette Wearing Course, by making 5 mixed variations ranging from (2 to 10)% of the weight of the aggregate . This research was initiated through a survey process, material procurement, testing of stacking materials, making test specimens, testing specimens. The results of the research can show that the type of Thermosetting plastic waste has a significant influence on the Asphalt Concrete mixture AC-WC heat mixture, including: Density, Marshall Stability, Flow, VIM, VMA, MQ and the remaining Marshall Stability tend to show an increase, moderate VFA and VIMrefusal Density values tend to show a decrease. Thus the plastic waste from the Thermosetting type can be used as a partial replacement of the aggregate for the Asphalt Concrete mixture AC-WC heat mixture with a plastic waste content is limited to a maximum of 10% and at an optimum asphalt content of 5.55%. Thus this research is expected to be of benefit to the industry and the people of Semarang in relation to the use of plastic waste for road pavement.

scholarly journals ALTERNATIF PENGGUNAAN SERAT ECENG GONDOK UNTUK MENINGKATKAN INDEX PROPERTIES OF MARSHALL PADA CAMPURAN LASTON TIPE I SNI 03-1737-1989

UKaRsT ◽  
2018 ◽  
Vol 2 (1) ◽  
pp. 1
Author(s):  
Dwi Kartikasari ◽  
Samsul Arif
Keyword(s):  
Water Hyacinth ◽  
Asphalt Mixture ◽  
Flexible Pavement ◽  
Type I ◽  
The Road ◽  
Concrete Layer ◽  
Marshall Test ◽  
Marshall Stability ◽  
Water Hyacinth Fiber

However, flexible pavement has many disadvantages, such as early damage to the road surface after some time has passed by traffic so the road cannot reach the planned age. For this reason, a research was carried out to add hot asphalt mixture which aims to improve the quality of the mixture, the selected material is natural water hyacinth. The method used is trial and error with reference SNI 031737-1989. Variations used were 3%, 5%, and 7% of asphalt weight, the level of asphalt used was 4.48%. Of the 3 variations of the mixture used in Type I Asphalt Concrete Layer, the results obtained that the water hyacinth fiber content that has the best score and meet the specifications of SNI 03-1737- 1989 is the percentage of 7% obtained. from the calculation data using graphs and regression models where Marshall Stability is 889.73 Kg, VFWA (voids filled with asphalt) are equal to 65.97%, VIM (voids in mixtures) are equal to 1.757%, VMA (voids in mineral aggregates ) is equal to 20.30%, density 2.420 gr / cc, Flow 3.37 mm, and Marshall Quotient of 265.80 Kg / mm.Keywords : flexible pavement, water hyacinth fiber, Marshall test.

scholarly journals Laboratory Evaluation of the Use of Florida Washed Shell in Open-Graded Asphalt Mixtures

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7060
Author(s):  
Mohammad Alharthai ◽  
Qing Lu ◽  
Ahmed Elnihum ◽  
Asad Elmagarhe
Keyword(s):  
Tensile Strength ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Indirect Tensile Strength ◽  
Laboratory Evaluation ◽  
Void Content ◽  
Coarse Aggregates ◽  
Significant Difference ◽  
Indirect Tensile ◽  
Marshall Stability

This study investigates the substitution of conventional aggregate with a Florida washed shell in open-graded asphalt mixtures and evaluates the optimal substitution percentage in aggregate gradations of various nominal maximum aggregate sizes (NMASs) (i.e., 4.75, 9.5, and 12.5 mm). Laboratory experiments were performed on open-graded asphalt mixture specimens with the coarse aggregate of sizes between 2.36 and 12.5 mm being replaced by the Florida washed shell at various percentages (0, 15, 30, 45, and 100%). Specimen properties relevant to the performance of open-graded asphalt mixtures in the field were tested, evaluated, and compared. Specifically, a Marshall stability test, Cantabro test, indirect tensile strength test, air void content test, and permeability test were conducted to evaluate the strength, resistance to raveling, cracking resistance, void content, and permeability of open-graded asphalt mixtures. The results show that there is no significant difference in the Marshall stability and indirect tensile strength when the coarse aggregates are replaced with Florida washed shell. This study also found that the optimum percentages of Florida washed shell in open-graded asphalt mixture were 15, 30, and 45% for 12.5, 9.5, and 4.75 mm NMAS gradations, respectively.

scholarly journals Assessment Mixing and Compaction Temperatures for Modified HMA Using Superpave High Shear Viscosity Methods

2018 ◽  
Vol 21 (4) ◽  
pp. 516-522 ◽  
Author(s):  
Alaa Hussein Abed ◽  
Ali Hwaidi Nasser
Keyword(s):  
Shear Viscosity ◽  
Asphalt Mixture ◽  
High Shear ◽  
Compaction Temperature ◽  
Modified Asphalt ◽  
Performance Grade ◽  
Modified Binders ◽  
Different Temperatures ◽  
Marshall Stability

The objective of this study is determining the mixing and compaction temperature of the modified asphalt mixture. Results of binder tests showed that the addition of 3% SBS  to control asphalt (PG 64-16) would achieve the desired performance level (PG 76-16) a performance grade that fits our climate with traffic loads. When using 5% SBS the performance grade of binder increased three grades (PG 82-16) and when increasing SBS content to 8% the performance grade increased four grades (PG 88-16). At shear rate of 500 (s-1), the modified asphalt viscosity can be obtained at different temperatures and the viscosity temperature curve can be achieved. As a result, the mixing and compaction temperature of modified asphalt can be determined to reach 0.17 ± 0.02 Pa.s and 0.28 ± 0.03 Pa.s for mixing and compaction, respectively. It is noted that SBS modified reached a viscosity of 3 Pa.s when 8 % additive. Additive contents above these values may not be suitable for good workability and pump ability according to Superpave specifications. While addition of 5% SBS with control asphalt, more than 3.7times at 135°C Increase the viscosity. Marshall Stability test indicated that the strength for the SBS specimens increases as compared to the conventional specimens. An increase of about 39%, 74%, 102%, was observed with 3%SBS 5%SBS 8%SBS modified binders, respectively. The Marshall test results for 8%SBS binders required compaction temperatures above 175°C need to keep up quality of HMA item while limiting natural effect amid development, these proposals are unsatisfactory Modified mixtures the 5% SBS modification was determined to be the maximum useful content. The Superpave method to estimate mixing and compaction temperatures show are not practical for use with modified binders. Also,  it is observed that good agreement values between the average Marshall compaction temperature and the High Shear Viscosity Method (HSRV) and   lower than Superpave methods Where the decline ranges from 15 ºC to 17 ºC.

Sign in / Sign up

Export Citation Format

Share Document