scholarly journals CMOS Low-Dropout Voltage Regulator Design Trends: An Overview

Electronics ◽  
2022 ◽  
Vol 11 (2) ◽  
pp. 193
Author(s):  
Mohammad Arif Sobhan Bhuiyan ◽  
Md. Rownak Hossain ◽  
Khairun Nisa’ Minhad ◽  
Fahmida Haque ◽  
Mohammad Shahriar Khan Hemel ◽  
...  
Keyword(s):  
High Performance ◽  
Supply Voltage ◽  
Process Variations ◽  
Cmos Technology ◽  
Optimization Techniques ◽  
Oxide Semiconductor ◽  
Voltage Regulator ◽  
Stable Operation ◽  
Short Channel ◽  
Voltage Range

Systems-on-Chip’s (SoC) design complexity demands a high-performance linear regulator architecture to maintain a stable operation for the efficient power management of today’s devices. Over the decades, the low-dropout (LDO) voltage regulator design has gained attention due to its design scalability with better performance in various application domains. Industry professionals as well as academia have put forward their innovations such as event-driven explicit time-coding, exponential-ratio array, switched RC bandgap reference circuit, etc., to make a trade-off between several performance parameters such as die area, ripple rejection, supply voltage range, and current efficiency. However, current LDO architectures in micro and nanometer complementary metal–oxide–semiconductor (CMOS) technology face some challenges, such as short channel effects, gate leakage, fabrication difficulty, and sensitivity to process variations at nanoscale. This review presents the LDO architectures, optimization techniques, and performance comparisons in different LDO design domains such as digital, analog, and hybrid. In this review, various state-of-the-art circuit topologies, deployed for the betterment of LDO performance and focusing on the specific parameter up-gradation to the overall improvement of the functionality, are framed, which will serve as a comparative study and reference for researchers.

scholarly journals Growth of high-quality semiconducting tellurium films for high-performance p-channel field-effect transistors with wafer-scale uniformity

2022 ◽  
Vol 6 (1) ◽  
Author(s):  
Taikyu Kim ◽  
Cheol Hee Choi ◽  
Pilgyu Byeon ◽  
Miso Lee ◽  
Aeran Song ◽  
...  
Keyword(s):  
Field Effect ◽  
Physical Vapor Deposition ◽  
High Performance ◽  
Supply Voltage ◽  
Field Effect Transistors ◽  
Low Cost ◽  
Three Dimensional ◽  
Cmos Technology ◽  
Oxide Semiconductor ◽  
Wafer Scale

AbstractAchieving high-performance p-type semiconductors has been considered one of the most challenging tasks for three-dimensional vertically integrated nanoelectronics. Although many candidates have been presented to date, the facile and scalable realization of high-mobility p-channel field-effect transistors (FETs) is still elusive. Here, we report a high-performance p-channel tellurium (Te) FET fabricated through physical vapor deposition at room temperature. A growth route involving Te deposition by sputtering, oxidation and subsequent reduction to an elemental Te film through alumina encapsulation allows the resulting p-channel FET to exhibit a high field-effect mobility of 30.9 cm2 V−1 s−1 and an ION/OFF ratio of 5.8 × 105 with 4-inch wafer-scale integrity on a SiO2/Si substrate. Complementary metal-oxide semiconductor (CMOS) inverters using In-Ga-Zn-O and 4-nm-thick Te channels show a remarkably high gain of ~75.2 and great noise margins at small supply voltage of 3 V. We believe that this low-cost and high-performance Te layer can pave the way for future CMOS technology enabling monolithic three-dimensional integration.

An Area and Energy Efficient RAM Cell Design in Quantum Dot Cellular Automata

2019 ◽  
Vol 16 (10) ◽  
pp. 4179-4187
Author(s):  
Amanpreet Sandhu ◽  
Sheifali Gupta
Keyword(s):  
Cellular Automata ◽  
Quantum Dot ◽  
High Performance ◽  
Complementary Metal Oxide Semiconductor ◽  
Cmos Technology ◽  
Oxide Semiconductor ◽  
Short Channel Effects ◽  
Short Channel ◽  
Quantum Dot Cellular Automata ◽  
Channel Effects

The Conventional Complementary Metal oxide semiconductor (CMOS) technology has been revolutionized from the past few decades. However, the CMOS circuit faces serious constraints like short channel effects, quantum effects, doping fluctuations at the nanoscale which limits them to further scaling down at nano meter range. Among various existing nanotechnologies, Quantum dot Cellular Automata (QCA) provides new solution at nanocircuit design. The technical advancement of the paper lies in designing a high performance RAM cell with less QCA cells, less occupational area and lower power dissipation characteristics. The design occupies 12.5% lower area, 16.6% lower input to output delay, and dissipates 18.26% lesser energy than the designs in the literature. The proposed RAMcell is robust due to lesser noise variations. Also it has less fabrication cost due to absence of rotated cells.

Projected Performance of Sub-10 nm GaN-based Double Gate MOSFETs

2017 ◽  
Vol 2 (2) ◽  
pp. 15-19 ◽  
Author(s):  
Md. Saud Al Faisal ◽  
Md. Rokib Hasan ◽  
Marwan Hossain ◽  
Mohammad Saiful Islam
Keyword(s):  
High Speed ◽  
Field Effect Transistors ◽  
Cmos Technology ◽  
Channel Length ◽  
Capacitive Coupling ◽  
Oxide Semiconductor ◽  
Double Gate ◽  
Short Channel ◽  
Channel Effects ◽  
Silvaco Atlas

GaN-based double gate metal-oxide semiconductor field-effect transistors (DG-MOSFETs) in sub-10 nm regime have been designed for the next generation logic applications. To rigorously evaluate the device performance, non-equilibrium Green’s function formalism are performed using SILVACO ATLAS. The device is turn on at gate voltage, VGS =1 V while it is going to off at VGS = 0 V. The ON-state and OFF-state drain currents are found as 12 mA/μm and ~10-8 A/μm, respectively at the drain voltage, VDS = 0.75 V. The sub-threshold slope (SS) and drain induced barrier lowering (DIBL) are ~69 mV/decade and ~43 mV/V, which are very compatible with the CMOS technology. To improve the figure of merits of the proposed device, source to gate (S-G) and gate to drain (G-D) distances are varied which is mentioned as underlap. The lengths are maintained equal for both sides of the gate. The SS and DIBL are decreased with increasing the underlap length (LUN). Though the source to drain resistance is increased for enhancing the channel length, the underlap architectures exhibit better performance due to reduced capacitive coupling between the contacts (S-G and G-D) which minimize the short channel effects. Therefore, the proposed GaN-based DG-MOSFETs as one of the excellent promising candidates to substitute currently used MOSFETs for future high speed applications.

scholarly journals An 18.8–33.9 GHz, 2.26 mW Current-Reuse Injection-Locked Frequency Divider for Radar Sensor Applications

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2551
Author(s):  
Kwang-Il Oh ◽  
Goo-Han Ko ◽  
Jeong-Geun Kim ◽  
Donghyun Baek
Keyword(s):  
Supply Voltage ◽  
Cmos Technology ◽  
Frequency Divider ◽  
Oxide Semiconductor ◽  
Center Frequency ◽  
Radar Sensor ◽  
Frequency Locking ◽  
Current Reuse ◽  
Sensor Applications ◽  
Locking Range

An 18.8–33.9 GHz, 2.26 mW current-reuse (CR) injection-locked frequency divider (ILFD) for radar sensor applications is presented in this paper. A fourth-order resonator is designed using a transformer with a distributed inductor for wideband operating of the ILFD. The CR core is employed to reduce the power consumption compared to conventional cross-coupled pair ILFDs. The targeted input center frequency is 24 GHz for radar application. The self-oscillated frequency of the proposed CR-ILFD is 14.08 GHz. The input frequency locking range is from 18.8 to 33.8 GHz (57%) at an injection power of 0 dBm without a capacitor bank or varactors. The proposed CR-ILFD consumes 2.26 mW of power from a 1 V supply voltage. The entire die size is 0.75 mm × 0.45 mm. This CR-ILFD is implemented in a 65 nm complementary metal-oxide semiconductor (CMOS) technology.

scholarly journals Investigation of PVT-Aware STT-MRAM Sensing Circuits for Low-VDD Scenario

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 551
Author(s):  
Zhongjian Bian ◽  
Xiaofeng Hong ◽  
Yanan Guo ◽  
Lirida Naviner ◽  
Wei Ge ◽  
...  
Keyword(s):  
Nonvolatile Memory ◽  
High Speed ◽  
Low Voltage ◽  
Supply Voltage ◽  
Random Access ◽  
Magnetic Tunnel Junction ◽  
Complementary Metal Oxide Semiconductor ◽  
Current Mode ◽  
Cmos Technology ◽  
Oxide Semiconductor

Spintronic based embedded magnetic random access memory (eMRAM) is becoming a foundry validated solution for the next-generation nonvolatile memory applications. The hybrid complementary metal-oxide-semiconductor (CMOS)/magnetic tunnel junction (MTJ) integration has been selected as a proper candidate for energy harvesting, area-constraint and energy-efficiency Internet of Things (IoT) systems-on-chips. Multi-VDD (low supply voltage) techniques were adopted to minimize energy dissipation in MRAM, at the cost of reduced writing/sensing speed and margin. Meanwhile, yield can be severely affected due to variations in process parameters. In this work, we conduct a thorough analysis of MRAM sensing margin and yield. We propose a current-mode sensing amplifier (CSA) named 1D high-sensing 1D margin, high 1D speed and 1D stability (HMSS-SA) with reconfigured reference path and pre-charge transistor. Process-voltage-temperature (PVT) aware analysis is performed based on an MTJ compact model and an industrial 28 nm CMOS technology, explicitly considering low-voltage (0.7 V), low tunneling magnetoresistance (TMR) (50%) and high temperature (85 °C) scenario as the worst sensing case. A case study takes a brief look at sensing circuits, which is applied to in-memory bit-wise computing. Simulation results indicate that the proposed high-sensing margin, high speed and stability sensing-sensing amplifier (HMSS-SA) achieves remarkable performance up to 2.5 GHz sensing frequency. At 0.65 V supply voltage, it can achieve 1 GHz operation frequency with only 0.3% failure rate.

scholarly journals Performance Measures of Different Gate Oxide Materials in Gate All Around Fet

2020 ◽  
Vol 9 (2) ◽  
pp. 23-25
Keyword(s):  
High Performance ◽  
Field Effect Transistors ◽  
Gate Oxide ◽  
Oxide Semiconductor ◽  
Oxide Materials ◽  
Performance Limits ◽  
Short Channel ◽  
Advanced Technique ◽  
And Performance

The classical planar Metal Oxide Semiconductor Field Effect Transistors (MOSFET) is fabricated by oxidation of a semiconductor namely Silicon. In this generation, an advanced technique called 3D system architecture FETs, are introduced for high performance and low power quality of devices. Based on the limitations of Short Channel Effect (SCE), Silicon (Si) FET cannot be scaled under 10nm. Hence various performing measures like methods, principles, and geometrics are done to upscale the semiconductor. CMOS using alternate channel materials like GE and III-Vs on substrates is a highly anticipated technique for developing nanowire structures. By considering these issues, in this paper, we developed a simulation model that provides accurate results basing on Gate layout and multi-gate NW FET's so that the scaling can be increased few nanometers long and performance limits gradually increases. The model developed is SILVACO that tests the action of FET with different gate oxide materials.

scholarly journals Design of high performance, low power sub thresholds ram using source coupled logic for implantable applications.

2018 ◽  
Vol 7 (2.12) ◽  
pp. 205
Author(s):  
T Vasudeva Reddy ◽  
Dr B.K. Madhavi
Keyword(s):  
Low Power ◽  
High Performance ◽  
Supply Voltage ◽  
Process Variations ◽  
Primary Objective ◽  
Total Power ◽  
Threshold Region ◽  
Major Power ◽  
Low Power Circuits ◽  
Power Circuits

Low power circuits functioning in sub threshold were proposed in earlier seventies. Recently, growing with the need of low power consumption, the low power circuits have became more attractive. However, the act of sub threshold design logics has become sensitive to the supply voltage & process variations like temperature and so on. In sub threshold region of operations the supply voltage (Vgs) is less than the threshold (Vth).This leads to less power dissipation in over all circuit, but drastically increment in propagation delay. The major intention of the paper is to offer new low power & less delay digital circuits. SRAM is the major power drawing element and dissipation is about 40% in total power. The primary objective is to design of sub threshold SRAM design, Functionality and performance is estimated from the power and delay.The second objective is to offer novel Source coupled logic based SRAM (ST-SC SRA) M & Operating these design under sub threshold operating region. Performance is analyzed through power and delay. Finally comparing the traditional sub threshold SRAM with source coupled based SRAM in power and delay on par with the performance. Discussing some of the applications, where there is a requirement of less power and delay. 

Analysis and Simulation of a Low-Leakage Analog Single Gate and FinFET Circuits

2014 ◽  
Vol 13 (02) ◽  
pp. 1450012 ◽  
Author(s):  
Manorama Chauhan ◽  
Ravindra Singh Kushwah ◽  
Pavan Shrivastava ◽  
Shyam Akashe
Keyword(s):  
Integrated Circuits ◽  
Metal Oxide ◽  
Low Power ◽  
High Performance ◽  
Complementary Metal Oxide Semiconductor ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Short Channel ◽  
State Dependency ◽  
Low Leakage

In the world of Integrated Circuits, complementary metal–oxide–semiconductor (CMOS) has lost its ability during scaling beyond 50 nm. Scaling causes severe short channel effects (SCEs) which are difficult to suppress. FinFET devices undertake to replace usual Metal Oxide Semiconductor Field Effect Transistor (MOSFETs) because of their better ability in controlling leakage and diminishing SCEs while delivering a strong drive current. In this paper, we present a relative examination of FinFET with the double gate MOSFET (DGMOSFET) and conventional bulk Si single gate MOSFET (SGMOSFET) by using Cadence Virtuoso simulation tool. Physics-based numerical two-dimensional simulation results for FinFET device, circuit power is presented, and classifying that FinFET technology is an ideal applicant for low power applications. Exclusive FinFET device features resulting from gate–gate coupling are conversed and efficiently exploited for optimal low leakage device design. Design trade-off for FinFET power and performance are suggested for low power and high performance applications. Whole power consumptions of static and dynamic circuits and latches for FinFET device, believing state dependency, show that leakage currents for FinFET circuits are reduced by a factor of over ~ 10X, compared to DGMOSFET and ~ 20X compared with SGMOSFET.

scholarly journals Extremely high-gain source-gated transistors

2019 ◽  
Vol 116 (11) ◽  
pp. 4843-4848 ◽  
Author(s):  
Jiawei Zhang ◽  
Joshua Wilson ◽  
Gregory Auton ◽  
Yiming Wang ◽  
Mingsheng Xu ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Indium Tin Oxide ◽  
High Performance ◽  
Critical Factor ◽  
High Gain ◽  
Oxide Semiconductor ◽  
Design Rule ◽  
Short Channel ◽  
Channel Effects ◽  
Channel Lengths

Despite being a fundamental electronic component for over 70 years, it is still possible to develop different transistor designs, including the addition of a diode-like Schottky source electrode to thin-film transistors. The discovery of a dependence of the source barrier height on the semiconductor thickness and derivation of an analytical theory allow us to propose a design rule to achieve extremely high voltage gain, one of the most important figures of merit for a transistor. Using an oxide semiconductor, an intrinsic gain of 29,000 was obtained, which is orders of magnitude higher than a conventional Si transistor. These same devices demonstrate almost total immunity to negative bias illumination temperature stress, the foremost bottleneck to using oxide semiconductors in major applications, such as display drivers. Furthermore, devices fabricated with channel lengths down to 360 nm display no obvious short-channel effects, another critical factor for high-density integrated circuits and display applications. Finally, although the channel material of conventional transistors must be a semiconductor, by demonstrating a high-performance transistor with a semimetal-like indium tin oxide channel, the range and versatility of materials have been significantly broadened.

scholarly journals DIGITAL CONTROLLED OSCILLATOR (DCO) FOR ALL DIGITAL PHASE-LOCKED LOOP (ADPLL) – A REVIEW

2019 ◽  
Vol 82 (1) ◽  
Author(s):  
Florence Choong ◽  
Mamun Ibne Reaz ◽  
Mohamad Ibrahim Kamaruzzaman ◽  
Md. Torikul Islam Badal ◽  
Araf Farayez ◽  
...  
Keyword(s):  
Supply Voltage ◽  
Complementary Metal Oxide Semiconductor ◽  
Phase Locked Loop ◽  
Cmos Technology ◽  
Oxide Semiconductor ◽  
Cmos Process ◽  
Process Technology ◽  
Chip Area ◽  
Digital Phase ◽  
Low Power Dissipation

Digital controlled oscillator (DCO) is becoming an attractive replacement over the voltage control oscillator (VCO) with the advances of digital intensive research on all-digital phase locked-loop (ADPLL) in complementary metal-oxide semiconductor (CMOS) process technology. This paper presents a review of various CMOS DCO schemes implemented in ADPLL and relationship between the DCO parameters with ADPLL performance. The DCO architecture evaluated through its power consumption, speed, chip area, frequency range, supply voltage, portability and resolution. It can be concluded that even though there are various schemes of DCO that have been implemented for ADPLL, the selection of the DCO is frequently based on the ADPLL applications and the complexity of the scheme. The demand for the low power dissipation and high resolution DCO in CMOS technology shall remain a challenging and active area of research for years to come. Thus, this review shall work as a guideline for the researchers who wish to work on all digital PLL.

Sign in / Sign up

Export Citation Format

Share Document