scholarly journals Development of an Approach for Determining the Effectiveness of Inhibition of Paraffin Deposition on the Wax Flow Loop Laboratory Installation

Inventions ◽  
2021 ◽  
Vol 7 (1) ◽  
pp. 3
Author(s):  
Pavel Ilushin ◽  
Kirill Vyatkin ◽  
Anton Kozlov
Keyword(s):  
Field Data ◽  
Correct Selection ◽  
Laboratory Studies ◽  
Flow Loop ◽  
Cold Finger ◽  
Average Deviation ◽  
Laboratory Installation ◽  
Perm Krai ◽  
Wax Deposits ◽  
Selection Of

The formation of wax deposits is a common phenomenon in the production and transportation of formation fluids. On the territory of the Perm Krai, this problem occurs in half of the mining funds. One of the most common and promising methods of dealing with these deposits is the use of inhibitor regents. The most popular technique for assessing the effectiveness of a wax inhibitor is the «Cold Finger», which has a number of significant drawbacks. This work presents a number of methods for assessing the effectiveness of inhibition of paraffin formation on the laboratory installation «WaxFlowLoop». A number of laboratory studies have been carried out to determine the effectiveness of a paraffin deposition inhibitor for inhibiting the paraffin formation process of four target fluids. Verification of the obtained values was carried out by comparing them with the field data. As a result of laboratory studies, it was found that the value of the inhibitor efficiency, determined by the «Cold Finger» method, differs from the field data by an average of 2 times. At the same time, the average deviation of the results determined at the «WaxFlowLoop» installation from the field data is 8.1%. The correct selection of a paraffin deposition inhibitor and its dosage can significantly increase the inter-treatment period of the well, thereby reducing its maintenance costs and increasing the efficiency of well operation.

scholarly journals Development of a Methodology and Software Package for Predicting the Formation of Organic Deposits Based on the Results of Laboratory Studies

Fluids ◽  
2021 ◽  
Vol 6 (12) ◽  
pp. 446
Author(s):  
Pavel Ilushin ◽  
Kirill Vyatkin ◽  
Alexander Menshikov
Keyword(s):  
Software Package ◽  
Oil Industry ◽  
High Accuracy ◽  
Precipitation Process ◽  
Laboratory Studies ◽  
Flow Loop ◽  
Correlation Dependence ◽  
Perm Krai ◽  
Organic Deposits ◽  
Over Time

One of the main problems in the oil industry is the fallout of asphaltene–resin–paraffin deposits (ARPDs) during oil production and transportation. The formation of organic deposits leads to reduced equipment life and reduced production. Currently, there is no single methodology for the numerical simulation of the ARPD dropout process. The aim of our work was to obtain a correlation dependence characterizing the rate of wax growth over time for oils in the Perm Krai, depending on temperature, pressure, and speed conditions. Experimental data for 20 oil samples were obtained using a Wax Flow Loop installation that simulates fluid movement in tubing. The developed correlation was tested in 154 wells. The results of numerical modeling of the paraffin precipitation process made it possible to correct the inter-treatment period of scraping for 109 wells (71%), indicating the high accuracy of the developed approach.

The Long Road to Sustainability

2018 ◽  
Author(s):  
Alexander Gillespie
Keyword(s):  
Sustainable Development ◽  
Environmental Problem ◽  
Social Sustainability ◽  
Good News ◽  
Correct Selection ◽  
The Third ◽  
Positive Indicators ◽  
Laws And Policies ◽  
Developed World ◽  
Selection Of

This book examines the idea of sustainable development, made up of economic, social, and environmental parts over the period of human history. This work suggests humanity has been unsustainable in all three areas for most of its history, although in the last few hundred years the scale of unsustainability has increased, while, simultaneously, answers have started to emerge. This conclusion can be seen in two parts, namely the economic and social sides of sustainable development and then the environmental ones. This work suggests that, with the correct selection of tools, solid and positive foundations for the economic and social sides of sustainable development is possible as the world globalizes. This is not, however, a foregone conclusion. Despite a number of recent positive indicators in this area, there are still very large unanswered questions with existing mechanisms and other gaps in the international architecture which, if not fixed, could quickly make problems of economic and social sustainability worse, not better. With the third leg of sustainable development, that for the environment, the optimism is not as strong. The good news is that science, laws, and policies have evolved and expanded to the level that, in theory, there is no environmental problem which cannot be solved. In many areas, especially in the developed world, success is already easy to measure. Where it is not easy to measure, and pessimism creeps in, is in the developing world, which is now inheriting a scale and mixture of environmental difficulties which are simply unprecedented.

scholarly journals Simulation Verification of the Contact Parameter Influence on the Forces’ Course of Cereal Grain Impact against a Stiff Surface

2021 ◽  
Vol 11 (2) ◽  
pp. 466
Author(s):  
Włodzimierz Kęska ◽  
Jacek Marcinkiewicz ◽  
Łukasz Gierz ◽  
Żaneta Staszak ◽  
Jarosław Selech ◽  
...  
Keyword(s):  
Dynamic Properties ◽  
Decisive Role ◽  
Force Sensor ◽  
Contact Forces ◽  
Correct Selection ◽  
Contact Parameter ◽  
Cereal Grain ◽  
Wide Range ◽  
The Impact ◽  
Selection Of

The continuous development of computer technology has made it applicable in many scientific fields, including research into a wide range of processes in agricultural machines. It allows the simulation of very complex physical phenomena, including grain motion. A recently discovered discrete element method (DEM) is used for this purpose. It involves direct integration of equations of grain system motion under the action of various forces, the most important of which are contact forces. The method’s accuracy depends mainly on precisely developed mathematical models of contacts. The creation of such models requires empirical validation, an experiment that investigates the course of contact forces at the moment of the impact of the grains. To achieve this, specialised test stations equipped with force and speed sensors were developed. The correct selection of testing equipment and interpretation of results play a decisive role in this type of research. This paper focuses on the evaluation of the force sensor dynamic properties’ influence on the measurement accuracy of the course of the plant grain impact forces against a stiff surface. The issue was examined using the computer simulation method. A proprietary computer software with the main calculation module and data input procedures, which presents results in a graphic form, was used for calculations. From the simulation, graphs of the contact force and force signal from the sensor were obtained. This helped to clearly indicate the essence of the correct selection of parameters used in the tests of sensors, which should be characterised by high resonance frequency.

scholarly journals Procedure for the Selection of Rubber Compound in Rubber-Metal Springs for Vibration Isolation

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1737
Author(s):  
Milan Banić ◽  
Dušan Stamenković ◽  
Aleksandar Miltenović ◽  
Dragan Jovanović ◽  
Milan Tica
Keyword(s):  
Numerical Simulation ◽  
Constitutive Model ◽  
Vibration Isolation ◽  
Correct Selection ◽  
Virtual Experiment ◽  
Rubber Compound ◽  
Key Factor ◽  
Railway Engineering ◽  
Selection Of

The selection of a rubber compound has a determining influence on the final characteristics of rubber-metal springs. Therefore, the correct selection of a rubber compound is a key factor for development of rubber-metal vibration isolation springs with required characteristics. The procedure for the selection of the rubber compound for vibration isolation of rubber-metal springs has been proposed, so that the rubber-metal elements have the necessary characteristics, especially in terms of deflection. The procedure is based on numerical simulation of spring deflection with Bergström-Boyce constitutive model in virtual experiment, with a goal to determine which parameters of the constitutive model will lead to spring required deflection. The procedure was verified by case study defined to select rubber compound for a rubber–metal spring used in railway engineering.

Generalization with Precision: The Role of Negative Teaching Examples in the Instruction of Generalized Grocery Item Selection

1986 ◽  
Vol 11 (4) ◽  
pp. 300-308 ◽  
Author(s):  
Robert H. Horner ◽  
Richard W. Albin ◽  
Ginevera Ralph
Keyword(s):  
Young Adults ◽  
Grocery Store ◽  
Item Selection ◽  
Multiple Baseline ◽  
Correct Selection ◽  
Correct Rejection ◽  
Baseline Design ◽  
Dependent Variables ◽  
Selection Of

For generalization to be functional, it must occur with a precision that results in acquired responses occurring under appropriate, nontrained conditions, and acquired responses not occurring under inappropriate, nontrained conditions. This study examines the effect of differing types of negative teaching examples on the precision with which generalized grocery item selection is learned. Within a split-multiple baseline design, six young adults identified as mildly, moderately, or severely mentally retarded were trained to select or to reject grocery items using picture cards as cues. The dependent variables were correct selection of 10 trained “positive” grocery items and the correct rejection of 20 nontrained “negative” grocery items in a nontrained grocery store. Participants were trained in a grocery store to select 10 positive grocery examples matching their picture cards and to reject either (a) a set of negative examples that were maximally different from the positive examples, or (b) a set of negative examples that were minimally different from the positive examples. Both training sets resulted in participants correctly selecting the 10 positive items in a nontrained store. Training with the “minimally different” negative examples was functionally related to improved rejection of nontrained negative items in the nontrained store. The implications of teaching with minimally different, negative examples are discussed.

scholarly journals Mechanical properties of dental restorative materials: relative contribution of laboratory tests

2003 ◽  
Vol 11 (3) ◽  
pp. 162-167 ◽  
Author(s):  
Linda Wang ◽  
Paulo Henrique Perlatti D'Alpino ◽  
Lawrence Gonzaga Lopes ◽  
José Carlos Pereira
Keyword(s):  
Mechanical Properties ◽  
Laboratory Tests ◽  
Clinical Performance ◽  
Dental Materials ◽  
Correct Selection ◽  
Relative Contribution ◽  
Dental Restorative Materials ◽  
Restorative Materials ◽  
Dental Restorative ◽  
Selection Of

A wide variety of dental products that are launched on the market becomes the correct selection of these materials a difficult task. Although the mechanical properties do not necessarily represent their actual clinical performance, they are used to guide the effects of changes in their composition or processing on these properties. Also, these tests might help somehow the clinician to choose once comparisons between former formulations and new ones, as well as, with the leading brand, are highlighted by manufactures. This paper presents a review of the most important laboratory tests. In this manner, the knowledge of these tests will provide a critical opinion related to the properties of different dental materials.

Assessment of efficiency of distribution centre at different variants of freight traffic consolidation

2021 ◽  
pp. 22-27
Author(s):  
Elena Dmitrievna Pserovskaya ◽  
◽  
Anna Pavlovna Grefenshteyn ◽  
Keyword(s):  
Potential Benefit ◽  
High Efficiency ◽  
Positive Influence ◽  
Correct Selection ◽  
Freight Traffic ◽  
Distribution Centre ◽  
Selection Of

For the determination of a potential benefit from creation of a distribution centre the paper proposes a method and presents results of calculation of a decrease of total number of rides and total run of automobiles at various variants of goods consolidation. The authors have established a positive influence of the centre on intracity transportation. At the same time, high efficiency of the considered technology can be reached by involvement of a bigger number of consignees and by consolidation of a relatively small number of goods batches in one automobile at efficient routing and correct selection of location of a distribution centre.

The use of premix in feeding of young pigs on fattening

2020 ◽  
pp. 54-59
Author(s):  
A. S. Ivanova ◽  
N. V. Dunaeva
Keyword(s):  
Positive Impact ◽  
Live Weight ◽  
Feed Additives ◽  
Correct Selection ◽  
Control Group ◽  
Pork Meat ◽  
Large White ◽  
Young Pigs ◽  
Experimental Group ◽  
Selection Of

Increasing the production of pork meat requires careful work not only in terms of breeding, but also in the organization of complete feeding of animals, the correct selection of feed and feed additives containing the necessary nutrients. The purpose of the work was to analyze the use of premix in feeding young pigs on fattening. Two groups of fattening young pigs (Large White×Landrace) have been selected for the researches using the method of analogous groups, taking into account the breed, age, and live weight per 20 heads in each group with a live weight of 35 kg. Pigs of the control group have received the main economic diet, and animals of the experimental group have received an additional premix Khutorok at the rate of 10 g of premix per 1 kg of feed. The results have shown that the best age to reach 100 kg was in the experimental group of pigs – 215,8 days, which received premix with feed that characterizes their higher precocity by 36,3 days (P < 0,001) than in the control group of animals. The use of this premix had a positive impact on the livability of young animals, in the experimental group it was by 9,3 abs.% more than in the control group of animals. Thus, the best fattening traits have been possessed by young pigl of the experimental group have been received the premix Khutorok in their diet at the rate of 10 g of premix per 1 kg of feed. The obtained data indicate the feasibility of using the premix Khutorok in the feeding pigs for fattening.

Porcellio spinicornis Say (Isopoda) demography. II. A comparison between field and laboratory data

1976 ◽  
Vol 54 (6) ◽  
pp. 825-842 ◽  
Author(s):  
Donald J. McQueen
Keyword(s):  
Field Data ◽  
Laboratory Data ◽  
Field Population ◽  
Laboratory Studies ◽  
The Third ◽  
Terrestrial Isopod ◽  
Independent Laboratory ◽  
Demographic Study ◽  
June July ◽  
Rates Of Growth

Field data from a demographic study of the terrestrial isopod Porcellio spinicornis Say were analyzed and compared with laboratory data reported by McQueen and Carnio. On the study area, which covered 482.8 m2, it was observed that reproduction began when average temperatures were > 13 °C, and that about 86% of the individuals produced one brood and about 30% produced two broods. During 1972, 25 654 offspring were produced and during 1973, 27 664 offspring resulted from reproduction, which took place during May, June, July, and August. By October of both years, these animals attained sizes ranging from 10 to 30 mg and exhibited 42 to 47% survivorship. During the next summer, females grew to between 30 and 50 mg and males to between 20 and 40 mg, and survivorship ranged from 15% in May to 2% in August. During the third summer, females attained sizes ranging from 80 to 100 mg and males from 40 to 70 mg. Survivorship during this period ranged from 1% in May to 0% in August. All rates of growth, reproduction, and survival, as well as reproductive periodicity, agreed with independent laboratory studies conducted under controlled conditions. During the 3 years studied the field population remained relatively constant and appeared to be limited by temperature conditions.

scholarly journals The Evaluation of Agricultural Land Use Sustainability in the Post-Socialist Camp Countries: Methodological and Practical Aspects

2021 ◽  
Vol 13 (2) ◽  
pp. 59-78
Author(s):  
Olena Kotykova ◽  
Mykola Babych
Keyword(s):  
Land Use ◽  
Agricultural Land ◽  
Sustainable Use ◽  
Correct Selection ◽  
Agricultural Land Use ◽  
Current State ◽  
Definition Of ◽  
The Given ◽  
Selection Of ◽  
Integral Indicator

An effective implementation of the sustainable use of agricultural land program is impossible without reliable results of the current state of the problem. In this sense, the correct selection of indicators and methods for determining the level of stability is important. The authors proposes the definition of the agricultural land use sustainability integral indicator based on three methodological approaches: the construction of the indicators system, each of them reflects some aspects of the land use sustainability at the macro level (according to the specific issues); the construction of the integral indicator for comparing the countries’ land use sustainability. According to the given methods it has been proved that agricultural land use in the countries of the post-socialist camp has a positive dynamics, but the sustainability indicators for all indicators have not achieved yet. This study was supported in part by the Erasmus SUPPA program – Jean Monnet Associations Application No 611556-EPP-1-2019-1-UA-EPPJMO-SUPPA.

Sign in / Sign up

Export Citation Format

Share Document