scholarly journals Investigation of Lipolytic-Secreting Bacteria from an Artificially Polluted Soil Using a Modified Culture Method and Optimization of Their Lipase Production

2021 ◽  
Vol 9 (12) ◽  
pp. 2590
Author(s):  
Van Hong Thi Pham ◽  
Jaisoo Kim ◽  
Soonwoong Chang ◽  
Woojin Chung
Keyword(s):  
Metal Ions ◽  
Large Scale ◽  
Nitrogen Sources ◽  
Culture Method ◽  
Lipase Production ◽  
Industrial Applications ◽  
Vital Role ◽  
Bacterial Strains ◽  
Functional Bacteria ◽  
Microbial Lipases

Compared to lipases from plants or animals, microbial lipases play a vital role in different industrial applications and biotechnological perspectives due to their high stability and cost-effectiveness. Therefore, numerous lipase producers have been investigated in a variety of environments in the presence of lipidic carbon and organic nitrogen sources. As a step in the development of cultivating the unculturable functional bacteria in this study, the forest soil collected from the surrounding plant roots was used to create an artificially contaminated environment for lipase-producing bacterial isolation. The ten strongest active bacterial strains were tested in an enzyme assay supplemented with metal ions such as Ca2+, Zn2+, Cu2+, Fe2+, Mg2+, K+, Co2+, Mn2+, and Sn2+ to determine bacterial tolerance and the effect of these metal ions on enzyme activity. Lipolytic bacteria in this study tended to grow and achieved a high lipase activity at temperatures of 35–40 °C and at pH 6–7, reaching a peak of 480 U/mL and 420 U/mL produced by Lysinibacillus PL33 and Lysinibacillus PL35, respectively. These potential lipase-producing bacteria are excellent candidates for large-scale applications in the future.

scholarly journals Nitrogen source and pH interact and modulate lipase secretion in a non-clinical strain of Candida parapsilosis

2019 ◽  
Vol 41 ◽  
pp. e45481
Author(s):  
Rodolfo Krüger da Câmara Ribas ◽  
Diórgenes dos Santos Carboni ◽  
Juciana Clarice Cazarolli ◽  
Simone Hickmann Flôres ◽  
Maurício Ramirez-Castrillon ◽  
...  
Keyword(s):  
Nitrogen Source ◽  
Lipolytic Activity ◽  
Nitrogen Sources ◽  
Lipase Production ◽  
Industrial Applications ◽  
Enzyme Secretion ◽  
Clinical Strain ◽  
Surface Model ◽  
Yeast Strains ◽  
Initial Ph

Lipases (E.C. 3.1.1.3) are serine-hydrolases, and act on long chain fatty acid ester bonds. They exhibit specific and enantioselective activities, which are desirable for many industrial applications. This study aimed at screening and optimizing the production of lipases by wild yeast strains from a variety of substrates, as well as characterizing the enzyme. An initial selection was made in oxygenated oil-supplemented minimum medium, and the enzymatic activity of the supernatant was tested over p- nitrophenyl palmitate. One-hundred and twenty-four yeast strains from different substrates were tested, and twenty-three showed significantly higher lipolytic activity (p <0.01). One yeast in particular, QU110, showed best lipase production and therefore was selected for the optimization and characterization processes. This yeast exhibits enzyme secretion in initial pH 6.0, with olive oil and tryptone as carbon and nitrogen sources, respectively. There was a strong interaction between nitrogen source and initial pH, and pH 9.0 seems to inhibit enzyme secretion. The crude enzyme (cell-free supernatant) shows stability in surfactants and n-hexane, but not in ethanol or methanol. A Response Surface Model was created and optimal enzyme activity conditions were observed at 36°C and pH 8.0. The lipase is appropriate for transesterification reactions, as the enzyme is more stable in strong apolar solvents than moderately apolar ones. Also, secretion by pH was not reported elsewhere, which should be further investigated and contribute for other yeast bioprocesses as well.

scholarly journals Function-Oriented Graphene Quantum Dots Probe for Single Cell in situ Sorting of Active Microorganisms in Environmental Samples

2021 ◽  
Vol 12 ◽  
Author(s):  
Yeshen Luo ◽  
Fei Liu ◽  
Jianhua Song ◽  
Qian Luo ◽  
Yonggang Yang ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Single Cell ◽  
Environmental Samples ◽  
Large Scale ◽  
Graphene Quantum Dots ◽  
Resonance Energy ◽  
Positive Control ◽  
Methyl Red ◽  
Bacterial Strains ◽  
Functional Bacteria

Functional microorganisms play a vital role in removing environmental pollutants because of their diverse metabolic capability. Herein, a function-oriented fluorescence resonance energy transfer (FRET)-based graphene quantum dots (GQDs-M) probe was developed for the specific identification and accurate sorting of azo-degrading functional bacteria in the original location of environmental samples for large-scale culturing. First, nitrogen-doped GQDs (GQDs-N) were synthesized using a bottom-up strategy. Then, a GQDs-M probe was synthesized based on bonding FRET-based GQDs-N to an azo dye, methyl red, and the quenched fluorescence was recovered upon cleavage of the azo bond. Bioimaging confirmed the specific recognition capability of GQDs-M upon incubation with the target bacteria or environmental samples. It is suggested that the estimation of environmental functional microbial populations based on bioimaging will be a new method for rapid preliminary assessment of environmental pollution levels. In combination with a visual single-cell sorter, the target bacteria in the environmental samples could be intuitively screened at the single-cell level in 17 bacterial strains, including the positive control Shewanella decolorationis S12, and were isolated from environmental samples. All of these showed an azo degradation function, indicating the high accuracy of the single-cell sorting strategy using the GQDs-M. Furthermore, among the bacteria isolated, two strains of Bacillus pacificus and Bacillus wiedmannii showed double and triple degradation efficiency for methyl red compared to the positive control (strain S12). This strategy will have good application prospects for finding new species or high-activity species of specific functional bacteria.

scholarly journals Enhanced lipid production by addition of malic acid in fermentation of recombinant Mucor circinelloides Mc-MT-2

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yao Zhang ◽  
Qing Liu ◽  
Pengcheng Li ◽  
Yanxia Wang ◽  
Shaoqi Li ◽  
...  
Keyword(s):  
Malic Acid ◽  
Large Scale ◽  
Fatty Acid Biosynthesis ◽  
Lipid Production ◽  
Mucor Circinelloides ◽  
Industrial Applications ◽  
Vital Role ◽  
Transport Systems ◽  
Transporter Protein ◽  
Malate Transporter

AbstractIn our previous work, we reported a novel approach for increasing lipid production in an oleaginous fungus Mucor circinelloides by overexpression of mitochondrial malate transporter protein. This transporter plays a vital role in fatty acid biosynthesis during malate and citrate transport systems in oleaginous fungi. In this study, the controlling metabolic supplementation strategy was used to improve the lipid production by overexpression of malate transporter protein in M. circinelloides strain coded as Mc-MT-2. The effects of different metabolic intermediates on lipid production in batch fermentation by Mc-MT-2 were investigated. The optimal lipid production was obtained at 0.8% malic acid after 24 h of fermentation. Furthermore, in fed-batch bioreactors containing glucose as a carbon source supplemented with malic acid, the highest cell growth, and lipid production were achieved. The resulting strain showed the fungal dry biomass of 16 g/L, a lipid content of 32%, lipid yield of 5.12 g/L in a controlled bench-top bioreactor, with 1.60-, 1.60- and 2.56-fold improvement, respectively, compared with the batch control without supplementation of malic acid. Our findings revealed that the addition of malic acid during fermentation might play an important role in lipid accumulation in the recombinant M. circinelloides Mc-MT-2. This study provides valuable insights for enhanced microbial lipid production through metabolic supplementation strategy in large scale and industrial applications.

Phyto-fabrication of Iron Nanoparticles: Characterization and Antibacterial Capacity

2020 ◽  
Vol 16 ◽  
Author(s):  
Asma S. Algebaly ◽  
Afrah E. Mohammed ◽  
Mudawi M. Elobeid
Keyword(s):  
Electron Microscopy ◽  
Plant Extracts ◽  
Large Scale ◽  
Iron Nanoparticles ◽  
Ethanolic Extract ◽  
Green Technology ◽  
Resistant Bacteria ◽  
Scale Production ◽  
Bacterial Strains ◽  
Plant Sources

Introduction: Fabrication of iron nanoparticles (FeNPs) has recently gained a great concern for their varied applications in remediation technologies of the environment. Objective: The current study aimed to fabricate iron nanoparticles by green technology approach using different plant sources, Azadirachta indica leaf and Calligonum comosum root following two extraction methods. Methods: Currently, a mixture of FeCl2 and FeCl3 was used to react with the plant extracts which are considered as reducing and stabilizing agents for the generation of FeNPs in one step. Different techniques were used for FeNPs identification. Results: Immediately after mixing of the two reaction components, the color changed to dark brown as an indication of safe conversion of Fe ions to FeNPs, that later confirmed by zeta sizer, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). FeNPs fabricated by C. comosum showed smaller size when compared by those fabricated by A. indica. Using both plant sources, FeNPs fabricated by the aqueous extract had smaller size in relation to those fabricated by ethanolic extract. Furthermore, antibacterial ability against two bacterial strains was approved. Conclusion: The current results indicated that, at room temperature plant extracts fabricated Fe ion to Fe nanoparticles, suggesting its probable usage for large scale production as well as its suitability against bacteria. It could also be recommended for antibiotic resistant bacteria.

The Binding and Viscometric Studies of Ni+2, Co+2 and Mn+2 Ions with Protein by Spectrometric and pH Metric Techniques

2019 ◽  
Vol 9 (2) ◽  
pp. 151-162
Author(s):  
Shveta Acharya ◽  
Arun Kumar Sharma
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Protein Molecule ◽  
Vital Role ◽  
Sufficient Evidence ◽  
Structural Requirement ◽  
Nickel Ions ◽  
Cobalt Ions ◽  
Lower Temperature ◽  
Specific Oxidation

Background: The metal ions play a vital role in a large number of widely differing biological processes. Some of these processes are quite specific in their metal ion requirements. In that only certain metal ions, in specific oxidation states, can full fill the necessary catalytic or structural requirement, while other processes are much less specific. Objective: In this paper we report the binding of Mn (II), Ni (II) and Co (II) with albumin are reported employing spectrophotometric and pH metric method. In order to distinguish between ionic and colloidal linking, the binding of metal by using pH metric and viscometric methods and the result are discussed in terms of electrovalent and coordinate bonding. Methods: The binding of Ni+2, Co+2 and Mn+2 ions have been studied with egg protein at different pH values and temperatures by the spectrometric technique. Results: The binding data were found to be pH and temperature dependent. The intrinsic association constants (k) and the number of binding sites (n) were calculated from Scatchard plots and found to be at the maximum at lower pH and at lower temperatures. Therefore, a lower temperature and lower pH offered more sites in the protein molecule for interaction with these metal ions. Statistical effects seem to be more significant at lower Ni+2, Co+2 and Mn+2 ions concentrations, while at higher concentrations electrostatic effects and heterogeneity of sites are more significant. Conclusion: The pH metric as well as viscometric data provided sufficient evidence about the linking of cobalt, nickel and manganese ions with the nitrogen groups of albumin. From the nature and height of curves in the three cases it may be concluded that nickel ions bound strongly while the cobalt ions bound weakly.

Development of Nanomaterials as Photo Catalysts for Environmental Applications

2020 ◽  
Vol 09 ◽  
Author(s):  
Ahmed M. Abu-Dief ◽  
W. S. Mohamed
Keyword(s):  
Water Purification ◽  
Smart Materials ◽  
Block Size ◽  
Industrial Applications ◽  
Vital Role ◽  
High Catalytic Activity ◽  
Chemical Contaminants ◽  
Environmental Threats ◽  
Photo Catalysis ◽  
Materials Used

Abstract:: Sustainability environmental lack is a growing and pivotal mater due to the issues: such as disturbances associated with biodiversity pollution, and climate change. Pollutants are the major cause of these environmental threats in the atmosphere. In recently, the nano-based photocatalyst is at the forefront of the author's interest because of its promising potential as a green chemical-based compound, high catalytic activity, the suitable and controllable surface area for wastewater treatment. Semiconductor materials in nanosized scale have electronic and optical properties depend on its building block size, which plays a vital role in developing smart materials that are well efficient for simultaneously destroying harmful chemical contaminants from our environment. This makes these materials used in many possible industrial applications such as water purification. In this Review, we report the most significant results contributing to progress in the area of environmental hazardous pollutant detection and removal focused on water purification especially through photo-catalysis to give readers an overview of the present research trends. Moreover, we analyze previous studies to indicate key principles of photo-catalysis and provide guidelines that can be used to fabricate more efficient photocatalysts.

Evaluation of the growth and sporulation of different entomopathogenic fungi in different liquid and solid media at varied concentrations

2017 ◽  
Vol 6 (8) ◽  
pp. 5459
Author(s):  
Chandra Teja K. ◽  
Rahman S. J.
Keyword(s):  
Entomopathogenic Fungi ◽  
Large Scale ◽  
Insect Pests ◽  
Culture Media ◽  
Virulent Strain ◽  
Carbon Sources ◽  
Nitrogen Sources ◽  
Maximum Growth ◽  
Nutritional Requirements ◽  
Virulent Strains

Entomopathogenic fungi like Beauveria bassiana, Metarhizium anisopliae and Lecanicillium lecanii are used in biological control of agricultural insect pests. Their specific mode of action makes them an effective alternative to the chemical Insecticides. Virulent strains of Entomopathogenic fungi are effectively formulated and used as bio-insecticides world-wide. Amenable and economical multiplication of a virulent strain in a large scale is important for them to be useful in the field. Culture media plays a major role in the large-scale multiplication of virulent strains of Entomopathogens. Different substrates and media components are being used for this purpose. Yet, each strain differs in its nutritional requirements for the maximum growth and hence it is necessary to standardize the right components and their optimum concentrations in the culture media for a given strain of Entomopathogen. In the current study, three different nitrogen sources and two different carbon sources were tried to standardize the mass multiplication media for seven test isolates of Entomopathogenic fungi. A study was also conducted to determine the ideal grain media for the optimum conidial yields of the test isolates. Yeast extract was found to be the best Nitrogen source for the isolates. The isolates tested, differed in their nutritional requirements and showed variation in the best nitrogen and carbon sources necessary for their growth. Variation was also found in the optimum concentration of both the ingredients for the growth and sporulation of the isolates. In the solid-state fermentation study, rice was found to be the best grain for the growth of most of the fungi followed by barley. The significance of such a study in the development of an effective Myco-insecticide is vital and can be successfully employed in agriculture is discussed.

scholarly journals A highly thermotolerant laccase produced by Cerrena unicolor strain CGMCC 5.1011 for complete and stable malachite green decolorization

AMB Express ◽  
2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Yanhua Yao ◽  
Guimei Zhou ◽  
Yonghui Lin ◽  
Xinqi Xu ◽  
Jie Yang
Keyword(s):  
Malachite Green ◽  
Fermentation Broth ◽  
Nitrogen Sources ◽  
Life Time ◽  
Industrial Applications ◽  
Dynamics Simulation ◽  
Carbon And Nitrogen ◽  
Cdna Sequences ◽  
Cerrena Unicolor ◽  
Future Work

Abstract Laccases are a class of multi-copper oxidases with important industrial values. A thermotolerant laccase produced by a basidiomycete fungal strain Cerrena unicolor CGMCC 5.1011 was studied. With glycerin and peptone as the carbon and nitrogen sources, respectively, a maximal laccase activity of 121.7 U/mL was attained after cultivation in the shaking flask for 15 days. Transcriptomics analysis revealed an expressed laccase gene family of 12 members in C. unicolor strain CGMCC 5.1011, and the gene and cDNA sequences were cloned. A glycosylated laccase was purified from the fermentation broth of Cerrena unicolor CGMCC 5.1011 and corresponded to Lac2 based on MALDI-TOF MS/MS identification. Lac2 was stable at pH 5.0 and above, and was resistant to organic solvents. Lac2 displayed remarkable thermostability, with half-life time of 1.67 h at 70 ºC. Consistently, Lac2 was able to completely decolorize malachite green (MG) at high temperatures, whereas Lac7 from Cerrena sp. HYB07 resulted in accumulation of colored MG transformation intermediates. Molecular dynamics simulation of Lac2 was conducted, and possible mechanisms underlying Lac2 thermostability were discussed. The robustness of C. unicolor CGMCC 5.1011 laccase would not only be useful for industrial applications, but also provide a template for future work to develop thermostable laccases.

scholarly journals Beehive Products as Antibacterial Agents: A Review

Antibiotics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 717
Author(s):  
Rita Abou Nader ◽  
Rawan Mackieh ◽  
Rim Wehbe ◽  
Dany El El Obeid ◽  
Jean Marc Sabatier ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Honey Bee ◽  
Antibacterial Agents ◽  
Royal Jelly ◽  
Biological Activities ◽  
Vital Role ◽  
Bee Venom ◽  
Bacterial Strains ◽  
Wide Range ◽  
Life Threatening

Honeybees are one of the most marvelous and economically beneficial insects. As pollinators, they play a vital role in every aspect of the ecosystem. Beehive products have been used for thousands of years in many cultures for the treatment of various diseases. Their healing properties have been documented in many religious texts like the Noble Quran and the Holy Bible. Honey, bee venom, propolis, pollen and royal jelly all demonstrated a richness in their bioactive compounds which make them effective against a variety of bacterial strains. Furthermore, many studies showed that honey and bee venom work as powerful antibacterial agents against a wide range of bacteria including life-threatening bacteria. Several reports documented the biological activities of honeybee products but none of them emphasized on the antibacterial activity of all beehive products. Therefore, this review aims to highlight the antibacterial activity of honey, bee venom, propolis, pollen and royal jelly, that are produced by honeybees.

scholarly journals A modular microfluidic system based on a multilayered configuration to generate large-scale perfusable microvascular networks

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Tao Yue ◽  
Da Zhao ◽  
Duc T. T. Phan ◽  
Xiaolin Wang ◽  
Joshua Jonghyun Park ◽  
...  
Keyword(s):  
Large Scale ◽  
Circulatory System ◽  
Vertical Direction ◽  
Microfluidic System ◽  
Vital Role ◽  
Microvascular Networks ◽  
Biological Studies ◽  
Wide Range ◽  
High Flexibility

AbstractThe vascular network of the circulatory system plays a vital role in maintaining homeostasis in the human body. In this paper, a novel modular microfluidic system with a vertical two-layered configuration is developed to generate large-scale perfused microvascular networks in vitro. The two-layer polydimethylsiloxane (PDMS) configuration allows the tissue chambers and medium channels not only to be designed and fabricated independently but also to be aligned and bonded accordingly. This method can produce a modular microfluidic system that has high flexibility and scalability to design an integrated platform with multiple perfused vascularized tissues with high densities. The medium channel was designed with a rhombic shape and fabricated to be semiclosed to form a capillary burst valve in the vertical direction, serving as the interface between the medium channels and tissue chambers. Angiogenesis and anastomosis at the vertical interface were successfully achieved by using different combinations of tissue chambers and medium channels. Various large-scale microvascular networks were generated and quantified in terms of vessel length and density. Minimal leakage of the perfused 70-kDa FITC-dextran confirmed the lumenization of the microvascular networks and the formation of tight vertical interconnections between the microvascular networks and medium channels in different structural layers. This platform enables the culturing of interconnected, large-scale perfused vascularized tissue networks with high density and scalability for a wide range of multiorgan-on-a-chip applications, including basic biological studies and drug screening.

Sign in / Sign up

Export Citation Format

Share Document