scholarly journals Organoboron Compounds: Effective Antibacterial and Antiparasitic Agents

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3309
Author(s):  
Paolo Saul Coghi ◽  
Yinghuai Zhu ◽  
Hongming Xie ◽  
Narayan S. Hosmane ◽  
Yingjun Zhang
Keyword(s):  
Materials Science ◽  
Neglected Tropical Diseases ◽  
Coordination Property ◽  
Organoboron Compounds ◽  
Neck Tumors ◽  
Wide Range ◽  
Recent Developments ◽  
Cancer Agent ◽  
Pharmaceutical Agents ◽  
Electron Deficiency

The unique electron deficiency and coordination property of boron led to a wide range of applications in chemistry, energy research, materials science and the life sciences. The use of boron-containing compounds as pharmaceutical agents has a long history, and recent developments have produced encouraging strides. Boron agents have been used for both radiotherapy and chemotherapy. In radiotherapy, boron neutron capture therapy (BNCT) has been investigated to treat various types of tumors, such as glioblastoma multiforme (GBM) of brain, head and neck tumors, etc. Boron agents playing essential roles in such treatments and other well-established areas have been discussed elsewhere. Organoboron compounds used to treat various diseases besides tumor treatments through BNCT technology have also marked an important milestone. Following the clinical introduction of bortezomib as an anti-cancer agent, benzoxaborole drugs, tavaborole and crisaborole, have been approved for clinical use in the treatments of onychomycosis and atopic dermatitis. Some heterocyclic organoboron compounds represent potentially promising candidates for anti-infective drugs. This review highlights the clinical applications and perspectives of organoboron compounds with the natural boron atoms in disease treatments without neutron irradiation. The main topic focuses on the therapeutic applications of organoboron compounds in the diseases of tuberculosis and antifungal activity, malaria, neglected tropical diseases and cryptosporidiosis and toxoplasmosis.

scholarly journals IAEA Nuclear Science and Instrumentation Laboratory: Support to IAEA Member States and Recent Developments

2020 ◽  
Vol 225 ◽  
pp. 10005
Author(s):  
F. Foulon ◽  
H. Ben Abdelouahed ◽  
M. Bogovac ◽  
S. Charisopoulos ◽  
M. Matos ◽  
...  
Keyword(s):  
Materials Science ◽  
Transfer Of Knowledge ◽  
Member States ◽  
Full Field ◽  
Nuclear Science ◽  
Expertise Sharing ◽  
Wide Range ◽  
Recent Developments ◽  
Analytical System

As part of the International Atomic Energy Agency's (IAEA) Physics Section, the Nuclear Science and Instrumentation Laboratory (NSIL) helps Member States (MSs) to establish, operate and maintain various nuclear instrumentation and spectrometry techniques in support of a wide range of applications such as health care, food, agriculture, environment, forensics, cultural heritage, and materials science. NSIL is contributing to capacity building, transfer of knowledge and expertise sharing, including the development of instruments and validation of analytical methodologies. This paper describes NSIL's key activities and provides an overview of the recent developments and achievements, including the commissioning and utilization of an end-station at one of the beam lines in Elettra Sincrotrone Trieste (EST, Italy), the upgrade of an ultralight radiation monitoring system onboarded on a drone, as well as the development of a full field X-ray fluorescence analytical system for forensic applications and characterization of valuable art/archaeological objects.

Trends in Electron Energy Loss Spectroscopy

1977 ◽  
Vol 35 ◽  
pp. 228-229
Author(s):  
C. Colliex ◽  
P. Trebbia
Keyword(s):  
Energy Loss ◽  
Electron Energy ◽  
Electron Energy Loss Spectroscopy ◽  
Materials Science ◽  
Analytical Technique ◽  
Recent Developments ◽  
Quantitative Results ◽  
Electron Microscopes ◽  
Electron Energy Loss ◽  
Primary Electrons

The physical foundations for the use of electron energy loss spectroscopy towards analytical purposes, seem now rather well established and have been extensively discussed through recent publications. In this brief review we intend only to mention most recent developments in this field, which became available to our knowledge. We derive also some lines of discussion to define more clearly the limits of this analytical technique in materials science problems.The spectral information carried in both low ( 0<ΔE<100eV ) and high ( >100eV ) energy regions of the loss spectrum, is capable to provide quantitative results. Spectrometers have therefore been designed to work with all kinds of electron microscopes and to cover large energy ranges for the detection of inelastically scattered electrons (for instance the L-edge of molybdenum at 2500eV has been measured by van Zuylen with primary electrons of 80 kV). It is rather easy to fix a post-specimen magnetic optics on a STEM, but Crewe has recently underlined that great care should be devoted to optimize the collecting power and the energy resolution of the whole system.

Recycling and Reuse in the Roman Economy

2020 ◽  
Keyword(s):  
Building Materials ◽  
Computational Modelling ◽  
Late Antique ◽  
Roman Economy ◽  
Wide Range ◽  
The Status ◽  
Recent Developments ◽  
Methodological Approaches ◽  
First Time ◽  
Site Types

The recycling and reuse of materials and objects were extensive in the past, but have rarely been embedded into models of the economy; even more rarely has any attempt been made to assess the scale of these practices. Recent developments, including the use of large datasets, computational modelling, and high-resolution analytical chemistry, are increasingly offering the means to reconstruct recycling and reuse, and even to approach the thorny matter of quantification. Growing scholarly interest in the topic has also led to an increasing recognition of these practices from those employing more traditional methodological approaches, which are sometimes coupled with innovative archaeological theory. Thanks to these efforts, it has been possible for the first time in this volume to draw together archaeological case studies on the recycling and reuse of a wide range of materials, from papyri and textiles, to amphorae, metals and glass, building materials and statuary. Recycling and reuse occur at a range of site types, and often in contexts which cross-cut material categories, or move from one object category to another. The volume focuses principally on the Roman Imperial and late antique world, over a broad geographical span ranging from Britain to North Africa and the East Mediterranean. Last, but not least, the volume is unique in focusing upon these activities as a part of the status quo, and not just as a response to crisis.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals Recent Developments in the Determination of Biomarkers of Tobacco Smoke Exposure in Biological Specimens: A Review

2021 ◽  
Vol 18 (4) ◽  
pp. 1768
Author(s):  
Hernâni Marques ◽  
Pedro Cruz-Vicente ◽  
Tiago Rosado ◽  
Mário Barroso ◽  
Luís A. Passarinha ◽  
...  
Keyword(s):  
Tobacco Smoke ◽  
Solid Phase ◽  
Smoke Exposure ◽  
Tobacco Smoke Exposure ◽  
World Health ◽  
Second Hand Smoke ◽  
Tobacco Exposure ◽  
Wide Range ◽  
Recent Developments

Environmental tobacco smoke exposure (ETS) and smoking have been described as the most prevalent factors in the development of certain diseases worldwide. According to the World Health Organization, more than 8 million people die every year due to exposure to tobacco, around 7 million due to direct ETS and the remaining due to exposure to second-hand smoke. Both active and second-hand exposure can be measured and controlled using specific biomarkers of tobacco and its derivatives, allowing the development of more efficient public health policies. Exposure to these compounds can be measured using different methods (involving for instance liquid- or gas-chromatographic procedures) in a wide range of biological specimens to estimate the type and degree of tobacco exposure. In recent years, a lot of research has been carried out using different extraction methods and different analytical equipment; this way, liquid–liquid extraction, solid-phase extraction or even miniaturized procedures have been used, followed by chromatographic analysis coupled mainly to mass spectrometric detection. Through this type of methodologies, second-hand smokers can be distinguished from active smokers, and this is also valid for e-cigarettes and vapers, among others, using their specific biomarkers. This review will focus on recent developments in the determination of tobacco smoke biomarkers, including nicotine and other tobacco alkaloids, specific nitrosamines, polycyclic aromatic hydrocarbons, etc. The methods for their detection will be discussed in detail, as well as the potential use of threshold values to distinguish between types of exposure.

scholarly journals The Growth of Semiconductor Thin Films Studied by RHEED

1990 ◽  
Vol 43 (5) ◽  
pp. 583
Author(s):  
GL Price
Keyword(s):  
Thin Films ◽  
Surface Science ◽  
High Vacuum ◽  
High Energy ◽  
Ultra High Vacuum ◽  
Large Area ◽  
Growth Modes ◽  
Semiconductor Thin Films ◽  
Wide Range ◽  
Recent Developments

Recent developments in the growth of semiconductor thin films are reviewed. The emphasis is on growth by molecular beam epitaxy (MBE). Results obtained by reflection high energy electron diffraction (RHEED) are employed to describe the different kinds of growth processes and the types of materials which can be constructed. MBE is routinely capable of heterostructure growth to atomic precision with a wide range of materials including III-V, IV, II-VI semiconductors, metals, ceramics such as high Tc materials and organics. As the growth proceeds in ultra high vacuum, MBE can take advantage of surface science techniques such as Auger, RHEED and SIMS. RHEED is the essential in-situ probe since the final crystal quality is strongly dependent on the surface reconstruction during growth. RHEED can also be used to calibrate the growth rate, monitor growth kinetics, and distinguish between various growth modes. A major new area is lattice mismatched growth where attempts are being made to construct heterostructures between materials of different lattice constants such as GaAs on Si. Also described are the new techniques of migration enhanced epitaxy and tilted superlattice growth. Finally some comments are given On the means of preparing large area, thin samples for analysis by other techniques from MBE grown films using capping, etching and liftoff.

scholarly journals Securitisation gaps: Towards ideational understandings of state weakness

2021 ◽  
pp. 1-20
Author(s):  
Kevork Oskanian
Keyword(s):  
The State ◽  
Collective Knowledge ◽  
State Action ◽  
Role Of The State ◽  
Wide Range ◽  
State And Society ◽  
Interpretive Approach ◽  
Recent Developments ◽  
The Republic

Abstract This article contributes a securitisation-based, interpretive approach to state weakness. The long-dominant positivist approaches to the phenomenon have been extensively criticised for a wide range of deficiencies. Responding to Lemay-Hébert's suggestion of a ‘Durkheimian’, ideational-interpretive approach as a possible alternative, I base my conceptualisation on Migdal's view of state weakness as emerging from a ‘state-in-society's’ contested ‘strategies of survival’. I argue that several recent developments in Securitisation Theory enable it to capture this contested ‘collective knowledge’ on the state: a move away from state-centrism, the development of a contextualised ‘sociological’ version, linkages made between securitisation and legitimacy, and the acknowledgment of ‘securitisations’ as a contested Bourdieusian field. I introduce the concept of ‘securitisation gaps’ – divergences in the security discourses and practices of state and society – as a concept aimed at capturing this contested role of the state, operationalised along two logics (reactive/substitutive) – depending on whether they emerge from securitisations of the state action or inaction – and three intensities (latent, manifest, and violent), depending on the extent to which they involve challenges to state authority. The approach is briefly illustrated through the changing securitisation gaps in the Republic of Lebanon during the 2019–20 ‘October Uprising’.

scholarly journals An Overview of Flood Risk Analysis Methods

Water ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 474
Author(s):  
Daniel Constantin Diaconu ◽  
Romulus Costache ◽  
Mihnea Cristian Popa
Keyword(s):  
Core Collection ◽  
Web Of Science ◽  
Research Directions ◽  
Economic Implications ◽  
Forecasting Methods ◽  
Wide Range ◽  
Scientific Papers ◽  
Recent Developments ◽  
Flood Analysis ◽  
Temporal And Spatial

Scientific papers present a wide range of methods of flood analysis and forecasting. Floods are a phenomenon with significant socio-economic implications, for which many researchers try to identify the most appropriate methodologies to analyze their temporal and spatial development. This research aims to create an overview of flood analysis and forecasting methods. The study is based on the need to select and group papers into well-defined methodological categories. The article provides an overview of recent developments in the analysis of flood methodologies and shows current research directions based on this overview. The study was performed taking into account the information included in the Web of Science Core Collection, which brought together 1326 articles. The research concludes with a discussion on the relevance, ease of application, and usefulness of the methodologies.

scholarly journals Towards a methodology for the characterisation of the fabric of wet clays using X-ray scattering

2019 ◽  
Vol 92 ◽  
pp. 01005
Author(s):  
Georgios Birmpilis ◽  
Reza Ahmadi-Naghadeh ◽  
Jelke Dijkstra
Keyword(s):  
Materials Science ◽  
Measurement Techniques ◽  
Invasive Technique ◽  
Colloidal Systems ◽  
Characteristic Distance ◽  
X Ray ◽  
Hydrophobic Coating ◽  
X Ray Scattering ◽  
Wide Range ◽  
Ray Scattering

X-ray scattering is a promising non-invasive technique to study evolving nano- and micromechanics in clays. This study discusses the experimental considerations and a successful method to enable X-ray scattering to study clay samples at two extreme stages of consolidation. It is shown that the proposed sample environment comprising flat capillaries with a hydrophobic coating can be used for a wide range of voids ratios ranging from a clay suspension to consolidated clay samples, that are cut from larger specimens of reconstituted or natural clay. The initial X-ray scattering results using a laboratory instrument indicate that valuable information on, in principal evolving, clay fabric can be measured. Features such as characteristic distance between structural units and particle orientations are obtained for a slurry and a consolidated sample of kaolinite. Combined with other promising measurement techniques from Materials Science the proposed method will help advance the contemporary understanding on the behaviour of dense colloidal systems of clay, as it does not require detrimental sample preparation

Recent Developments In Monochromatic Microprobe X-Ray Fluorescence (MMXRF)

1998 ◽  
Vol 4 (S2) ◽  
pp. 378-379
Author(s):  
Z. W. Chen ◽  
D. B. Wittry
Keyword(s):  
Materials Science ◽  
High Vacuum ◽  
Three Dimensional ◽  
High Sensitivity ◽  
X Rays ◽  
Fluorescence Excitation ◽  
X Ray ◽  
Quantitative Microanalysis ◽  
Recent Developments ◽  
Fifth Order

A monochromatic x-ray microprobe based on a laboratory source has recently been developed in our laboratory and used for fluorescence excitation. This technique provides high sensitivity (ppm to ppb), nondestructive, quantitative microanalysis with minimum sample preparation and does not require a high vacuum specimen chamber. It is expected that this technique (MMXRF) will have important applications in materials science, geological sciences and biological science.Three-dimensional focusing of x-rays can be obtained by using diffraction from doubly curved crystals. In our MMXRF setup, a small x-ray source was produced by the bombardment of a selected target with a focused electron beam and a toroidal mica diffractor with Johann pointfocusing geometry was used to focus characteristic x-rays from the source. In the previous work ∼ 108 photons/s were obtained in a Cu Kα probe of 75 μm × 43 μm in the specimen plane using the fifth order reflection of the (002) planes of mica.

Sign in / Sign up

Export Citation Format

Share Document