scholarly journals A Comparative Study on the Modelling of Soybean Particles Based on the Discrete Element Method

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 286
Author(s):  
Dongxu Yan ◽  
Jianqun Yu ◽  
Liusuo Liang ◽  
Yang Wang ◽  
Yajun Yu ◽  
...  
Keyword(s):  
Soybean Seeds ◽  
Test Results ◽  
Dem Simulation ◽  
Equation Modelling ◽  
Multiple Contacts ◽  
Simulation Results ◽  
Related Machines ◽  
Better Than ◽  
Modelling Approach ◽  
Modelling Approaches

To solve the poor universality in the existing modelling approaches of soybean particles, we proposed a soybean particle modelling approach by combining five, nine, and 13 balls. The soybean seeds from three varieties (Suinong42, Jidou17, and Zhongdou39 with a sphericity of 94.78%, 86.86%, and 80.6%, respectively) are chosen as the study objects. By the comparisons between the simulation results and the test results in the “self-flow screening” and “piling angle” tests, it is concluded that the soybean particle modelling approach we presented in this paper is a universal modelling approach appropriate for soybean particles with different sphericities. The five-ball model is appropriate for the soybean particles with high sphericity, and the nine- or 13-ball models are applicable to those with low sphericity. The soybean particle modelling approach we presented is also compared with the ellipsoidal equation modelling approach for soybean particles and with the modelling approaches presented by other researchers. From an overall perspective, the soybean particle modelling approach we presented is better than the ellipsoidal equation modelling approach and those modelling approaches presented by other researchers. Additionally, it is shown that the multiple contacts issue in the multi-ball model has a little influence on the simulation results of soybean particle models. The study in this paper provides a new modelling approach for soybean particles in the DEM simulation of the contacts between soybean particles and the related machines.

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

Kemampuan Komunikasi Matematika: Studi Komparasi Pembelajaran Number Head Together (NHT) dan Media Power Point (PPT)

2020 ◽  
Vol 3 (1) ◽  
pp. 39-50
Author(s):  
Bernadeta Ritawati ◽  
Sri Wahyuni
Keyword(s):  
Communication Skills ◽  
Hypothesis Test ◽  
Test Results ◽  
Mathematical Communication ◽  
Cluster Technique ◽  
Significance Level ◽  
Quasi Experimental ◽  
Power Point ◽  
Media Power ◽  
Better Than

This research is a quasi-experimental study that aims to determine the comparison of students' mathematical communication abilities with the cooperative learning model of the NHT and PPT media in class VII SMP Negeri 02 Ngabang. The population in this study were all students of class VII SMP 02 Ngabang consisting of 3 classes. The sample in this study was taken by using the Random Sampling Cluster technique. Class VII A as class I experimental class with 24 students and class VII B as a experimental class II with 24 students. The instruments used were pretest and posttest in the form of description. Data analysis uses the t test with a significance level of 5%. The results showed the average posttest for the NHT class was 72.5 and the average posttest for the PP class was 66.666. From the posttest hypothesis test results obtained t hitung> t tabel (1.9522> 1,667). Because t_hitung> t_tabel, H_0 is rejected and H_a is accepted. This means that students' mathematical communication skills taught with the NHT are better than using Power point media.

scholarly journals Simulation and Nonlinearity Optimization of a High-Pressure Sensor

Sensors ◽  
2020 ◽  
Vol 20 (16) ◽  
pp. 4419
Author(s):  
Ting Li ◽  
Haiping Shang ◽  
Weibing Wang
Keyword(s):  
High Pressure ◽  
Pressure Sensor ◽  
Pressure Sensors ◽  
Original Model ◽  
Ansys Software ◽  
Nonlinear Error ◽  
Sensor Model ◽  
Optimized Model ◽  
Simulation Results ◽  
Better Than

A pressure sensor in the range of 0–120 MPa with a square diaphragm was designed and fabricated, which was isolated by the oil-filled package. The nonlinearity of the device without circuit compensation is better than 0.4%, and the accuracy is 0.43%. This sensor model was simulated by ANSYS software. Based on this model, we simulated the output voltage and nonlinearity when piezoresistors locations change. The simulation results showed that as the stress of the longitudinal resistor (RL) was increased compared to the transverse resistor (RT), the nonlinear error of the pressure sensor would first decrease to about 0 and then increase. The theoretical calculation and mathematical fitting were given to this phenomenon. Based on this discovery, a method for optimizing the nonlinearity of high-pressure sensors while ensuring the maximum sensitivity was proposed. In the simulation, the output of the optimized model had a significant improvement over the original model, and the nonlinear error significantly decreased from 0.106% to 0.0000713%.

scholarly journals Evaluation of the Feasibility of NaCaPO4-Blended Zirconia as a New CAD/CAM Material for Dental Restoration

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3819
Author(s):  
Ting-Hsun Lan ◽  
Yu-Feng Chen ◽  
Yen-Yun Wang ◽  
Mitch M. C. Chou
Keyword(s):  
Computer Aided Design ◽  
Optical Microscope ◽  
Dental Restoration ◽  
Numerical Control ◽  
Test Results ◽  
Cnc Machine ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design ◽  
Better Than

The computer-aided design/computer-aided manufacturing (CAD/CAM) fabrication technique has become one of the hottest topics in the dental field. This technology can be applied to fixed partial dentures, removable dentures, and implant prostheses. This study aimed to evaluate the feasibility of NaCaPO4-blended zirconia as a new CAD/CAM material. Eleven different proportional samples of zirconia and NaCaPO4 (xZyN) were prepared and characterized by X-ray diffractometry (XRD) and Vickers microhardness, and the milling property of these new samples was tested via a digital optical microscope. After calcination at 950 °C for 4 h, XRD results showed that the intensity of tetragonal ZrO2 gradually decreased with an increase in the content of NaCaPO4. Furthermore, with the increase in NaCaPO4 content, the sintering became more obvious, which improved the densification of the sintered body and reduced its porosity. Specimens went through milling by a computer numerical control (CNC) machine, and the marginal integrity revealed that being sintered at 1350 °C was better than being sintered at 950 °C. Moreover, 7Z3N showed better marginal fit than that of 6Z4N among thirty-six samples when sintered at 1350 °C (p < 0.05). The milling test results revealed that 7Z3N could be a new CAD/CAM material for dental restoration use in the future.

scholarly journals Injection-rolling nozzle in an imprint system with continuous injection direct rolling for ultra-thin microstructure guide light plate

2021 ◽  
Vol 13 (4) ◽  
pp. 168781402110112
Author(s):  
Yan Lou ◽  
Kewei Chen ◽  
Xiangwei Zhou ◽  
Yanfeng Feng
Keyword(s):  
Flow Velocity ◽  
Superior Performance ◽  
Light Transmittance ◽  
Velocity Difference ◽  
Orthogonal Experiments ◽  
Width Direction ◽  
Direct Rolling ◽  
Simulation Results ◽  
Continuous Injection ◽  
Better Than

A novel Injection-rolling Nozzle (IRN) in an imprint system with continuous injection direct rolling (CIDR) for ultra-thin microstructure polymer guide light plates was developed to achieve uniform flow velocity and temperature at the width direction of the cavity exit. A novel IRN cavity was designed. There are eight of feature parameters of cavity were optimized by orthogonal experiments and numerical simulation. Results show that the flow velocity at the width direction of the IRN outlet can reach uniformity, which is far better than that of traditional cavity. The smallest flow velocity difference and temperature difference was 0.6 mm/s and 0.24 K, respectively. The superior performance of the IRN was verified through a CIDR experiment. Several 0.35-mm thick, 340-mm wide, and 10-m long microstructural Polymethyl Methacrylate (PMMA) guide light plates were manufactured. The average filling rates of the microgrooves with the aspect ratio 1:3 reached above 93%. The average light transmittance is 88%.

Modeling and Design of Permanent Magnet Vibration-to-Electrical Power Generator’s Induction Coil

2012 ◽  
Vol 588-589 ◽  
pp. 614-617
Author(s):  
Zhi Hua Wang ◽  
Mei Ling Li ◽  
Jian Zhang ◽  
Li Wang ◽  
Yong Xu
Keyword(s):  
Permanent Magnet ◽  
Electrical Power ◽  
Induction Coil ◽  
Test Results ◽  
Coil Design ◽  
Sinusoidal Vibration ◽  
Electrical Generator ◽  
Simulation Results ◽  
Peak Value

The Equivalent Turn Number of Coil (ETNC) is proposed for induction coil design. Simulation results show that the vibrationonthe induction coil’s structure. The optimized coil is composed by two symmetry parts on the condition of sinusoidal vibration. The effective value of output EMF of optimized coil increases 51.39% than uniform coil’s. In the experiment, the optimized and uniform coils are fabricated with 600 turns and comparatively studied in the same vibration-to-electrical generator. The test results show that the peak-to-peak value and effective value of output EMF of the optimized coil can increase up to 52.59% and 48.76%, respectively, compared with the uniform coil.

scholarly journals Experiment and simulation about the effect of wear-ring abrasion on the performance of a marine centrifugal pump

2021 ◽  
Vol 13 (2) ◽  
pp. 168781402199811
Author(s):  
Wu Xianfang ◽  
Du Xinlai ◽  
Tan Minggao ◽  
Liu Houlin
Keyword(s):  
Numerical Simulation ◽  
Centrifugal Pump ◽  
Pressure Pulsation ◽  
Vibration Velocity ◽  
Test Results ◽  
Obvious Effect ◽  
Performance Change ◽  
Pump Test ◽  
Simulation Results ◽  
Axis Passing

The wear-ring abrasion can cause performance degradation of the marine centrifugal pump. In order to study the effect of front and back wear-ring clearance on a pump, test and numerical simulation were used to investigate the performance change of a pump. The test results show that the head and efficiency of pump decrease by 3.56% and 9.62% respectively at 1.0 Qd due to the wear-ring abrasion. Under 1.0 Qd, with the increase of the front wear-ring the vibration velocity at pump foot increases from 0.4 mm/s to 1.0 mm/s. The axis passing frequency (APF) at the measuring points increases significantly and there appears new characteristic frequency of 3APF and 4APF. The numerical simulation results show that the front wear-ring abrasion affects the flow at the inlet of the front chamber of the pump and impeller passage. And the back wear-ring abrasion has obvious effect on the flow in the back chamber of the pump and impeller passage, while the multi-malfunction of the front wear-ring abrasion and back wear-ring abrasion has the most obvious effect on the flow velocity and flow stability inside pump. The pressure pulsation at Blade Passing Frequency (BPF) of the three schemes all decrease with the increase of the clearance.

Sign in / Sign up

Export Citation Format

Share Document