scholarly journals A Comparative Study of Comprehensive Modeling Systems for Sediment Transport in a Curved Open Channel

Water ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1779
Author(s):  
Keivan Kaveh ◽  
Markus Reisenbüchler ◽  
Sandip Lamichhane ◽  
Tobias Liepert ◽  
Ngoc Dung Nguyen ◽  
...  
Keyword(s):  
Sediment Transport ◽  
Model Systems ◽  
Bed Deformation ◽  
Channel Bend ◽  
Modeling Systems ◽  
Mean Grain Size ◽  
Sediment Sorting ◽  
The Mean ◽  
Using Data ◽  
Comprehensive Modeling

In recent decades, a variety of morphodynamic model systems have been developed to improve our understanding of sediment transport and the resulting changes in riverbed topography. Despite progress in the description of physical processes, the degree of accuracy of morphodynamic model results remains difficult to assess and are also less than for hydrodynamics alone. In this paper, three different 2D morphodynamic systems have been applied to simulate a complex hydrodynamic and morphodynamic situation. These model systems were validated using data of sediment sorting and bed deformation conducted in a 180° channel bend under unsteady-flow conditions. The calculations obtained by each modeling system were compared with the available observed data. The simulated results showed that all applied morphodynamic models could precisely calculate the bed level changes and the areas of deposition and scour. However, the models are not efficient enough to predict the distribution of the mean grain size in the channel bend.

Numerical modelling of sediment transport in a channel bend with floating units

2021 ◽  
Author(s):  
Diwash Lal Maskey ◽  
Nils Ruther
Keyword(s):  
Transport Phenomenon ◽  
Sediment Transport ◽  
Numerical Modelling ◽  
Velocity Distribution ◽  
Three Dimensional ◽  
Flow Distribution ◽  
Deposition Pattern ◽  
Bed Deformation ◽  
Channel Bend ◽  
Conceptual Study

<p>Floating units/booms are used to trap or guide floating debris in watercourses. In a relatively shallow depth, these floats could affect the velocity distribution, sediment transport and channel bed deformation.  A three-dimensional non-hydrostatic numerical modelling was performed in a 180 degree channel bend with floats to see the effects in flow distribution and bed deformation as a conceptual study. Different configurations of the floats were simulated. The results showed that the flow velocity increased and deposition decreased at the inner bank of the bend. Use of floating units could be studied to alter sediment deposition pattern and sediment transport phenomenon in watercourses.</p>

scholarly journals Trends in incidence rate, health care use, and costs due to rib fractures in the Netherlands

2021 ◽  
Author(s):  
Jonne T. H. Prins ◽  
Mathieu M. E. Wijffels ◽  
Sophie M. Wooldrik ◽  
Martien J. M. Panneman ◽  
Michael H. J. Verhofstad ◽  
...  
Keyword(s):  
Health Care ◽  
Incidence Rate ◽  
Health Care Costs ◽  
Indirect Costs ◽  
Rib Fractures ◽  
Work Absence ◽  
Lost Productivity ◽  
The Mean ◽  
Using Data ◽  
Care Costs

Abstract Purpose This study aimed to examine population-based trends in the incidence rate, health care consumption, and work absence with associated costs in patients with rib fractures. Methods A retrospective nationwide epidemiologic study was performed with data from patients with one or more rib fractures presented or admitted to a hospital in the Netherlands between January 1, 2015 and December 31, 2018 and have been registered in the Dutch Injury Surveillance System (DISS) or the Hospital Discharge Registry (HDR). Incidence rates were calculated using data from Statistics Netherlands. The associated direct health care costs, costs for lost productivity, and years lived with disability (YLD) were calculated using data from a questionnaire. Results In the 4-year study period, a total of 32,124 patients were registered of which 19,885 (61.9%) required hospitalization with a mean duration of 7.7 days. The incidence rate for the total cohort was 47.1 per 100,000 person years and increased with age. The mean associated direct health care costs were €6785 per patient and showed a sharp increase after the age of 75 years. The mean duration of work absence was 44.2 days with associated mean indirect costs for lost productivity of €22,886 per patient. The mean YLD was 0.35 years and decreased with age. Conclusion Rib fractures are common and associated with lengthy HLOS and work absenteeism as well as high direct and indirect costs which appear to be similar between patients with one or multiple rib fractures and mostly affected by admitted patients and age.

scholarly journals Preparation of high-entropy carbides by different sintering techniques

2021 ◽  
Vol 56 (19) ◽  
pp. 11237-11247 ◽  
Author(s):  
Johannes Pötschke ◽  
Manisha Dahal ◽  
Mathias Herrmann ◽  
Anne Vornberger ◽  
Björn Matthey ◽  
...  
Keyword(s):  
Grain Size ◽  
Single Phase ◽  
X Ray Diffraction ◽  
Vacuum Sintering ◽  
X Ray ◽  
High Entropy ◽  
Mean Grain Size ◽  
The Mean ◽  
Gas Pressure Sintering ◽  
Hardness Values

AbstractDense (Hf, Ta, Nb, Ti, V)C- and (Ta, Nb, Ti, V, W)C-based high-entropy carbides (HEC) were produced by three different sintering techniques: gas pressure sintering/sinter–HIP at 1900 °C and 100 bar Ar, vacuum sintering at 2250 °C and 0.001 bar as well as SPS/FAST at 2000 °C and 60 MPa pressure. The relative density varied from 97.9 to 100%, with SPS producing 100% dense samples with both compositions. Grain size measurements showed that the substitution of Hf with W leads to an increase in the mean grain size of 5–10 times the size of the (Hf, Ta, Nb, Ti, V,)C samples. Vacuum-sintered samples showed uniform grain size distribution regardless of composition. EDS mapping revealed the formation of a solid solution with no intermetallic phases or element clustering. X-ray diffraction analysis showed the structure of mostly single-phase cubic high-entropy carbides. Hardness measurements revealed that (Hf, Ta, Nb, Ti, V)C samples possess higher hardness values than (Ta, Nb, Ti, V, W)C samples.

scholarly journals Serum C-reactive protein metabolite (CRPM) is associated with incidence of contralateral knee osteoarthritis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Anne-Christine Bay-Jensen ◽  
Asger Bihlet ◽  
Inger Byrjalsen ◽  
Jeppe Ragnar Andersen ◽  
Bente Juhl Riis ◽  
...  
Keyword(s):  
Phase Iii ◽  
Response To Treatment ◽  
C Reactive Protein ◽  
Two Phase ◽  
Knee Oa ◽  
Reactive Protein ◽  
Inflammatory Phenotype ◽  
The Mean ◽  
Using Data

AbstractThe heterogeneous nature of osteoarthritis (OA) and the need to subtype patients is widely accepted in the field. The biomarker CRPM, a metabolite of C-reactive protein (CRP), is released to the circulation during inflammation. Blood CRPM levels have shown to be associated with disease activity and response to treatment in rheumatoid arthritis (RA). We investigated the level of blood CRPM in OA compared to RA using data from two phase III knee OA and two RA studies (N = 1591). Moreover, the association between CRPM levels and radiographic progression was investigated. The mean CRPM levels were significantly lower in OA (8.5 [95% CI 8.3–8.8] ng/mL, n = 781) compared to the RA patients (12.8 [9.5–16.0] ng/mL, n = 60); however, a significant subset of OA patients (31%) had CRPM levels (≥ 9 ng/mL) comparable to RA. Furthermore, OA patients (n = 152) with CRPM levels ≥ 9 ng/mL were more likely to develop contra-lateral knee OA assessed by X-ray over a two-year follow-up period with an odds ratio of 2.2 [1.0–4.7]. These data suggest that CRPM is a blood-based biochemical marker for early identification OA patients with an inflammatory phenotype.

POSTPARTUM AMENORRHOEA IN RURAL EASTERN UTTAR PRADESH, INDIA

1998 ◽  
Vol 30 (2) ◽  
pp. 227-243
Author(s):  
K. N. S. YADAVA ◽  
S. K. JAIN
Keyword(s):  
Higher Education ◽  
Uttar Pradesh ◽  
Current Status Data ◽  
North India ◽  
Current Status ◽  
Data Sets ◽  
Survival Status ◽  
The Mean ◽  
The Difference ◽  
Using Data

This paper calculates the mean duration of the postpartum amenorrhoea (PPA) and examines its demographic, and socioeconomic correlates in rural north India, using data collected through 'retrospective' (last but one child) as well as 'current status' (last child) reporting of the duration of PPA.The mean duration of PPA was higher in the current status than in the retrospective data;n the difference being statistically significant. However, for the same mothers who gave PPA information in both the data sets, the difference in mean duration of PPA was not statistically significant. The correlates were identical in both the data sets. The current status data were more complete in terms of the coverage, and perhaps less distorted by reporting errors caused by recall lapse.A positive relationship of the mean duration of PPA was found with longer breast-feeding, higher parity and age of mother at the birth of the child, and the survival status of the child. An inverse relationship was found with higher education of a woman, higher education of her husband and higher socioeconomic status of her household, these variables possibly acting as proxies for women's better nutritional status.

scholarly journals Fabrication of (SiC-AlN)/ZrB2 Composite with Nano-Micron Hybrid Microstructure via PCS-Derived Ceramics Route

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 334
Author(s):  
Aidong Xia ◽  
Jie Yin ◽  
Xiao Chen ◽  
Zhengren Huang ◽  
Xuejian Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Flexural Strength ◽  
Hot Pressing ◽  
Raw Materials ◽  
Secondary Phase ◽  
Pressing Temperature ◽  
Xrd Pattern ◽  
Mean Grain Size ◽  
The Mean

In this work, a (SiC-AlN)/ZrB2 composite with outstanding mechanical properties was prepared by using polymer-derived ceramics (PDCs) and hot-pressing technique. Flexural strength reached up to 460 ± 41 MPa, while AlN and ZrB2 contents were 10 wt%, and 15 wt%, respectively, under a hot-pressing temperature of 2000 °C. XRD pattern-evidenced SiC generated by pyrolysis of polycarbosilane (PCS) was mainly composed by 2H-SiC and 4H-SiC, both belonging to α-SiC. Micron-level ZrB2 secondary phase was observed inside the (SiC-AlN)/ZrB2 composite, while the mean grain size (MGS) of SiC-AlN matrix was approximately 97 nm. This unique nano-micron hybrid microstructure enhanced the mechanical properties. The present investigation provided a feasible tactic for strengthening ceramics from PDCs raw materials.

scholarly journals PSYCHOLOGICAL PROFILE OF PATIENTS ELIGIBLE FOR BARIATRIC SURGERY

2016 ◽  
Vol 29 (suppl 1) ◽  
pp. 27-30 ◽  
Author(s):  
Graziela Aparecida Nogueira de Almeida RIBEIRO ◽  
Helenice Brizolla GIAMPIETRO ◽  
Lídia Barbieri BELARMINO ◽  
Wilson SALGADO-JÚNIOR
Keyword(s):  
Bariatric Surgery ◽  
Binge Eating ◽  
Average Score ◽  
Psychological Profile ◽  
Psychosocial Characteristics ◽  
The Mean ◽  
Low Levels ◽  
Using Data ◽  
Binge Eating Scale ◽  
To Receive

Abstract Background: The psychologist who works in bariatric surgery has a role to receive, evaluate, prepare and educate the patient who will undergo the surgical procedure. Psychological evaluation becomes important in so far as allows us to obtain data on personal and familiar history and allow tracing of possible psychopathology. Aim: To collect data on psychological evaluations of patients in a bariatric surgery service of a public hospital in order to describe the psychological profile of patients in this service. Method: Data were collected from 827 patients between 2001 and 2015, using data from an interview, Beck Depression Inventory (BDI), Beck Anxiety Inventory (BAI) and Binge Eating Scale (BES). Results: The mean age of patients before surgery was 39 years+/- 10, the mean BMI was 51 kg/m²+7, and most patients (81%) were female. The average score on the BDI was 14.8+8 and women had significantly higher scores than men. On the BAI the average score was 11+8 and on the ECAP was 14+8, both with no difference between groups. Conclusions: Psychosocial characteristics of the patients points to the significant presence of indicators of depression, with low levels of anxiety and binge eating.

The Study on the Fabrication of Nano-Structured Steel by Cold Rolling and Annealing of Martensite

2013 ◽  
Vol 634-638 ◽  
pp. 1807-1810
Author(s):  
Guang Xu ◽  
Jing Yang ◽  
Tao Xiong ◽  
Peng Deng ◽  
Long Fei Cao
Keyword(s):  
Grain Size ◽  
Cold Rolling ◽  
High Strength ◽  
Total Elongation ◽  
Plain Carbon Steel ◽  
Mean Grain Size ◽  
Cold Rolling And Annealing ◽  
The Mean ◽  
Martensite Microstructure ◽  
Very High

Sub-nano structured steel was obtained by cold rolling and annealing martensite microstructure for a plain carbon steel. The mean grain size is several hundreds nanometer. The steel has very high strength and also good total elongation.

Sign in / Sign up

Export Citation Format

Share Document