scholarly journals The Crimean Spindle as a prospective crown shape for growing fruit trees in intensive gardens of Crimea

2021 ◽  
pp. 32-36
Author(s):  
Нина Александровна Бабинцева ◽  
Тарас Григориевич Фоменко
Keyword(s):  
Fruit Trees ◽  
Agricultural Technology ◽  
Labor Costs ◽  
Horizontal Projection ◽  
Technological Characteristics ◽  
Crown Shape ◽  
Technological Assessment ◽  
Commercial Yield ◽  
The Cost ◽  
Technological Methods

В статье освещены результаты технологической оценки перспективной формы кроны - «крымское веретено» с сортами Бреберн, Джалита и Ренет Симиренко на подвое ЕМ-IХ в условиях Крыма. Целью исследований является изучение технологических характеристик формы кроны для создания высокоплотных садов. Работа проводится по методикам полевых исследований с плодовыми культурами. Установлено, что за счет использования технологически нетрудоемкой формы кроны обеспечивается урожайность в 29,5 т/га, на шестой год после посадки сада, с выходом товарной продукции до 99 %. Крона имеет компактные размеры: параметры горизонтальной проекции варьируют от 1,8 м (сорта Джалита, Бреберн) до 2,2 м (сорт Ренет Симиренко); объём - от 2,7 до 3,1 м. Затраты ручного труда находятся в прямой зависимости от биологических особенностей сорта. Трудоемкость обрезки 1 га сада с обозначенной формой кроны составляет от 84,4-86,7 (сорта Джалита, Ренет Симиренко) до 124,9 чел./ч (сорт Бреберн). При соблюдении всех технологических приемов формирования кроны, высокой агротехники и капельного орошения обеспечивается ежегодная урожайность и высокое качество продукции, при минимальных затратах труда. The article highlights the results of technological assessment of a promising crown shape - a Crimean Spindle with ‘Brebern’, ‘Dzhalita’ and ‘Renet Simirenko’ varieties on the ‘EM IX’ rootstock in the conditions of Crimea. The goal of the research is to study technological characteristics of the crown shape for creation of ultra-dense gardens. The work is carried out according to the methods of field study with fruit crops. It has been established that due to the use of a technologically labor saving crown shape, cropping capacity of 29.5 t/ha is provided on the sixth year after planting the garden, with a commercial yield of up to 99%. The crown has compact dimensions with the parameters of horizontal projection of the crown varying from 1.8 m (‘Dzhalita’, ‘Brebern’) - to 2.2 m (‘Renet Simirenko’), and volume - from 2.7 to 3.1 m. The cost of manual labor is in direct relationship to the biological characteristics of variety. Labor intensity of pruning 1 hectare of a garden with the above-mentioned crown shape ranges from 84.4 - 86.7 (‘Dzhalita’, ‘Renet Simirenko’) to 124.9 m/hrs. (‘Brebern’). If all technological methods of crown shaping, high agricultural technology and drip irrigation are obeyed, the annual cropping capacity and high quality products are ensured with minimal labor costs for cultivation.

FAKTOR-FAKTOR YANG MEMPENGARUHI PENDAPATAN USAHATANI KACANG TANAH DI KECAMATAN SEMAU KABUPATEN KUPANG

2020 ◽  
Vol 21 (1) ◽  
pp. 25-33
Author(s):  
Deni K.L. Mudin ◽  
Paulus Un ◽  
Lika Bernadina
Keyword(s):  
Social Life ◽  
Economic Value ◽  
Coefficient Of Determination ◽  
Labor Costs ◽  
Land Area ◽  
Average Income ◽  
Dry Land ◽  
Regression Methods ◽  
The Cost ◽  
Total Average

ABSTRACT Peanuts are one of the high economic value commodities in the dry land area. This commodity also contributes to the social life of the dry land area. This research has been conducted in Semau Sub-district, Kupang Regency, with the aim to determine the amount of income, break event point (BEP), R / C ratio, efficiency of capital use and factors that affect the income of peanuts farming, with the number of farmer respondents as many as 92 people , simple randomly selected. Data that has been collected by survey, library and interview methods; analyzed quantitatively-descriptive using regression methods. The results showed that the total average income of peanut farming in the study location was IDR 1,739,895 with a total average income of IDR 3,498,261 and a total average cost of IDR 1,758,366. While the break event point average of production is 147 Kg and the break event point price is IDR. 6.509, while for the total average the R / C ratio is 1.99. With factors that affect income are production (X1), seed costs (X2), and labor costs (X3). From the regression results with the Cobb-Douglass function the coefficient of determination (R2) is 0.822 with the meaning that variations in independent variables such as production, seed costs and labor costs explain the dependent variable namely income (Y) of 82.20% and the rest 17.80 % is explained by variables outside of the variables analyzed. From the results of the F test (diversity test) it was found that the factors X1, X2, and X3 had a significant effect on income at ⍺ 1%, then accept H1 at least one of: βi ≠ 0. Whereas the results of the t test (partial test) obtained that factors significant effect on income, namely production (X1) and labor costs (X2), while the cost of seeds (X3) does not significantly affect income.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

Enhancement in productivity and income sustainability through Integrated farming system approaches for small and marginal farmers of Eastern India

2017 ◽  
Vol 4 (2) ◽  
Author(s):  
SANJEEV KUMAR ◽  
SHIVANI . ◽  
S. K. SAMAL ◽  
S. K. DWIVEDI ◽  
MANIBHUSHAN .
Keyword(s):  
Nutrient Recycling ◽  
Farming Systems ◽  
Fruit Trees ◽  
Farming System ◽  
Eastern Region ◽  
Net Income ◽  
System Productivity ◽  
Integrated Farming ◽  
Systems Models ◽  
The Cost

Integration of different components viz. livestock, fishery, horticulture, mushroom etc. along with field crops not only enhanced productivity but by-products (waste) of one component act as input for another component through resource recycling within the system. Six integrated farming systems models with suitable combinations of Crop, vegetables, fruit trees, fish, livestock, mushroom etc. were made and evaluated at the experimental farm of ICAR Research Complex for Eastern Region, Patna during 2012-16 for harness maximum income, nutrient recycling and employment. Among six combinations, crop + fish + duck + goat resulted as most profitable combination in terms of productivity (RGEY- 22.2t), net income (Rs. 2,15,900/ha), additional employment (170 days/year) with income sustainability index (ISI) by 90.2. Upon nutrient recycling prepared from different wastes from the system Crop + fish + duck + goat combination added N (56.5 kg), P (39.6 kg) and K (42.7 kg) into the soil and reduced the cost of cultivation by 24 percent and was followed by crop + fish + goat combination. Crops grown under IFS mode with different types of manures produced 31 percent higher yield over conventional rice- wheat system. The contribution of crops towards the system productivity ranged from 36.4 to 56.2 %, while fish ranged from 22.0-33.5 %; for goat 25.4-32.9 %; for poultry 38.7 %; for duck 22.0-29.0 %; for cattle 32.2% and for mushroom 10.3 %.

Economic feasibility of restoration of degraded and neglected lands

2020 ◽  
pp. 79-90
Author(s):  
Anastasiya V. Mironova ◽  
Igor’ V. Liskin ◽  
Irina I. Afonina
Keyword(s):  
Soil Layer ◽  
Black Soil ◽  
Economic Feasibility ◽  
Research Purpose ◽  
Necessary Condition ◽  
Labor Costs ◽  
Human Needs ◽  
Fallow Lands ◽  
The Cost ◽  
Regions Of Russia

Neglect of soils leads to their degradation, worsens useful properties, and reduces fertility and productivity. (Research purpose) The research purpose is in conducting a comparative analysis of technologies for treating degraded soils, taking into account the economic feasibility of their restoration in non-black-soil regions of Russia. (Materials and methods) The article shows the main technological scheme of restoration of degraded soils. Authors have identified the main groups of land that are located in non-black-soil regions of Russia. (Results and discussion) The article presents the need for equipment, economic and labor costs for the restoration of each type of land in the non-black-soil regions of Russia. Authors took into account that the salary of machine operators depends on the time of direct execution of the task. It was found that the restoration of virgin and fallow lands was the most preferable from the economic, energy-saving and environmental points of view. The article shows that the restoration of pasture areas exceeds the cost of processing virgin lands, but the number of necessary machine and tractor units is comparable to work on virgin lands. Authors recommend to develop the soils with woody and shrubby vegetation in the first place, starting with land occupied by young plants. It is necessary to take into account the criteria for the fertility of the soil layer. It was found that soils with a small excess of moisture have small cost of its development, while on heavily swampy soils the cost of work on their development is many times higher than the cost of restoring other types of land. (Conclusion) The article shows that the restoration of neglected land is a necessary condition for improving the provision of human needs for food and a number of industrial goods. First of all, it is necessary to develop land that requires minimal investment of economic and labor costs.

scholarly journals Economic Analysis of the Use of VCS2000 for Pork Carcass Meat Yield Grading in Korea

Animals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1297
Author(s):  
Juntae Kim ◽  
Hyo-Dong Han ◽  
Wang Yeol Lee ◽  
Collins Wakholi ◽  
Jayoung Lee ◽  
...  
Keyword(s):  
Economic Analysis ◽  
Net Present Value ◽  
Cost Benefit Analysis ◽  
Cost Benefit ◽  
Feed Consumption ◽  
Cost Ratio ◽  
Benefit Analysis ◽  
Labor Costs ◽  
Meat Yield ◽  
The Cost

Currently, the pork industry is incorporating in-line automation with the aim of increasing the slaughtered pork carcass throughput while monitoring quality and safety. In Korea, 21 parameters (such as back-fat thickness and carcass weight) are used for quality grading of pork carcasses. Recently, the VCS2000 system—an automatic meat yield grading machine system—was introduced to enhance grading efficiency and therefore increase pork carcass production. The VCS2000 system is able to predict pork carcass yield based on image analysis. This study also conducted an economic analysis of the system using a cost—benefit analysis. The subsection items of the cost-benefit analysis considered were net present value (NPV), internal rate of return (IRR), and benefit/cost ratio (BC ratio), and each method was verified through sensitivity analysis. For our analysis, the benefits were grouped into three categories: the benefits of reducing labor costs, the benefits of improving meat yield production, and the benefits of reducing pig feed consumption through optimization. The cost-benefit analysis of the system resulted in an NPV of approximately 615.6 million Korean won, an IRR of 13.52%, and a B/C ratio of 1.65.

CURRENT RATIONALE ISSUES LABOR COSTS IN THE COST OF MILITARY PRODUCTS AT DIFFERENT STAGES OF THE LIFE CYCLE

2021 ◽  
Vol 3 (5) ◽  
pp. 52-61
Author(s):  
D. V. ZVEREV ◽  
◽  
I. I. SAVELEV ◽  
Keyword(s):  
Life Cycle ◽  
The State ◽  
Regulatory Framework ◽  
Labor Intensity ◽  
Labor Costs ◽  
Special Equipment ◽  
Frame Work ◽  
The Cost

Based on the experience of checking the validity of prices for military products supplied within the frame-work of the state defence order, problematic issues of rationing of labor costs have been identified. The im-perfection of the current regulatory framework in the field of substantiating the labor intensity of work is shown. Proposals for the standardization of labor at various stages of the life cycle of weapons, military and special equipment are reasoned.

Review of recent developments on improvement of estimated regulatory documentation for road works

2021 ◽  
Vol 2021 (23) ◽  
pp. 31-42
Author(s):  
Anatolii Tsynka ◽  
◽  
Andrii Hrinchuk ◽  
Ivan Rakovych ◽  
◽  
...  
Keyword(s):  
Work Performance ◽  
New Technologies ◽  
Operation Time ◽  
Road Construction ◽  
Labor Costs ◽  
The Road ◽  
Regulatory Documents ◽  
Road Work ◽  
Investment Process ◽  
The Cost

Introduction. In the modern conditions of the pricing system in the construction of Ukraine, the key value have the estimated norms, which are presented in separate collections, the main purpose of which is to determine the standard quantity of resources required to perform a particular type of work as a basis for the transition to the cost indicators. In order to determine the cost of road work objectively and accurately, it is essential that the indicators of estimated norms meet the requirements of regulatory documents and modern methods of execution of road works.Problematics. In connection with the active improvement of the regulatory base of the road construction industry, permanent upgrade of road organizations technique fleet, the introduction of new technologies and materials in construction and operation of roads, improving the methods of work there is a discrepancy between the existing resource element of estimated norms and the actual conditions of work in terms of built-up labor costs, the operation time of machines and mechanisms and the range of materials. Accordingly, it affects the reliability and accuracy of determining the cost of road works.Purpose. Improvement and harmonization with actual working conditions and requirements of regulatory documents of industry regulatory and estimate base of resource elementary estimated norms for work performed during construction, reconstruction, repair and operational maintenance of roads and bridges to ensure reliable and valid technical, economic and estimated calculations.Materials and methods. During work performance the analysis of the regulatory documentation, establishing the requirements to the technology of road works and materials has been carried out. A number of chronometric observations with the measurement of time of road works in full-scale conditions was carried out. The obtained data were summarized, averaged and on their basis the indicators of the resource element of the estimated norms were estimated.Results. A review of the main amendments and additions, which came into force after the approval of Amendment No 2 SOU 42.1-37641918-035:2018 [1] and Amendment No 2 SOU 42.1-37641918-071:2018 [2], which were developed to improve the regulatory-estimate base for the calculation of road works, taking into account the requirements and provisions of existing regulatory documents taking into account the current state of scientific and technological progress in the road sector.Conclusions. The above analysis of the amendments that came into force with the approval of [1]. and [2] will systematize the innovations provided by the requirements of current regulatory documents on the calculation of the cost of road works and the development of relevant documents at all stages of the investment process, planning and organization of road works, as well as the writing-off of material resources. Review and systematization of recent improvements in the estimated regulatory documents for road works will provide an opportunity to optimally plan the use of available material, labor and financial resources, often limited.Keywords: public road, operational maintenance, investment documentation, overhaul and current repairs, machine, mechanism, regulatory document, resource element estimate norm, Standard of Organization of Ukraine.

scholarly journals The effect of a crown shape on the activity of the processes of growth and the complexity of apple tree (Borkh) pruning in the conditions of the Piedmont zone of Crimea

2020 ◽  
pp. 242-245
Author(s):  
Виктория Сергеевна Кириченко ◽  
Нина Александровна Бабинцева ◽  
Надежда Александровна Тихомирова
Keyword(s):  
Field Experiments ◽  
Structural Parameters ◽  
High Growth ◽  
Fruit Trees ◽  
Labor Cost ◽  
Planting Density ◽  
Fruit Crops ◽  
High Productivity ◽  
Crown Shape ◽  
Dense Distribution

Основным направлением повышения продуктивности насаждений плодовых культур будет смена технологических подходов по эксплуатации садовых экосистем, основой которых является загущенное размещение плодовых деревьев, изменение формы кроны с ограничением их размеров, подбор сортов, подвоев, отвечающих требованиям плотного размещения деревьев с высокой продуктивностью, хорошим качеством плодов. Цель исследований - изучение влияния формы кроны на структурные параметры, степень облиственности и трудоемкость затрат труда при обрезке для создания интенсивных садов на слаборослых подвоях. Были проведены трехлетние полевые опыты по схеме: 1 вариант - стройное веретено (контроль); 2 вариант - безлидерная уплощенная крона; 3 вариант - трёхлидерная крона; 4 вариант - французская ось при плотности посадки 2500 дер./га (4 х 1 м). Объектом исследований являлись сорта яблони Бреберн, Джалита, Ренет Симиренко на подвое ЕМ IX в саду с капельным поливом. Работа проводилась по методикам полевых опытов с плодовыми культурами. Установлено, что высокая ростовая активность наблюдалась у сорта Ренет Симиренко независимо от формы кроны, где параметры варьировали от 0,71 м до 1,06 м. Структура плодообразующей древесины дерева зависит от биологических особенностей сорта и формы кроны. На третий год после посадки сада в кронах деревьев свободного веретена и французской оси сформировано наибольшее количество генеративных образований от 20,3 и 24,7% (Джалита, Бреберн) до 23,3 и 25,6% (Ренет Симиренко). Трудоемкость обрезки зависит от сорта, формы кроны и структуры обрастающей древесины. Максимальные затраты труда применяет один человек на обрезку деревьев сорта Джалита с трехлидерной кроной (25,6 чел.-час./га) и безлидерной уплощенной кроной (22,9 чел.-час./га). На обрезку сада деревьев с кроной по типу французской оси требуется 1,0 и 1,4 дня одному человеку или 7,2 (Джалита) и 9,5чел.- час./га (Ренет Симиренко), что в 1,9 и 2,2 раза меньше, чем на обрезку деревьев по типу стройного веретена (контроль). Область применения - садоводческие с.-х. предприятия всех форм собственности, садоводы - любители, специалисты The main direction of improving the productivity of plantations of fruit crops will be a change of technological approaches to the use of garden ecosystems, based on dense placement of fruit trees, changing the shape of the crown cap size, selection of varieties, rootstocks, meeting the requirements of a dense distribution of trees with high productivity, good fruit quality. The purpose of the research was to study the effect of crown shape on structural parameters, the degree of foliage and labor coefficient of pruning for the creation of intensive gardens on dwarf rootstocks. We carried out three-year field experiments according to the scheme: option 1 - slender spindle (control); option 2 - leaderless flattened crown; option 3 - triple leaders crown; option 4 - French axe, when planting density was 2500 trees/ha (4 х 1 м). The varieties ‘Braeburn’, ‘Dzhalita’, ‘Renet Simirenko’ on the rootstock EM IX in the garden with drip irrigation were the object of research. The study was performed according to the techniques of field experiments with fruit crops. It was found that high growth activity was observed for the variety ‘Renet Simirenko’, regardless the form of the crown, with parameters ranged from 0.71 m to 1,06 м. The structure of carpogenous wood depended on the biological characteristics of variety and crown shape. In the third year after planting the garden in the trees of control and French axe the greatest number of generative formations from 20.3 and 24.7% (‘Dzhalita’, ‘Braeburn’) to 23.3 and 25.6% (‘Renet Simirenko’) were developed. The complexity of pruning depended on the variety, the crown shape and the structure of the overgrown wood. Maximum labor cost one person spends for pruning the variety ‘Dzhalita’ with triple leader crown (25.6 man-hour/ha) and leaderless flattened crown (22.9 man-hour/ha). Pruning trees with French axe type of crown required 1.0 and 1.4 days per one person or 7.2 (‘Dzhalita’) and 9.5 man-hour/ha (‘Renet Simirenko’), which was 1.9 and 2.2 times less than the pruning according to the control. The scopes of the research are horticultural agricultural enterprises of all forms of ownership, gardener amateurs and experts.

scholarly journals CALCULATION OF PRODUCTION COST IN UD. USAHA BARU WITH FULL COSTING METHOD

2019 ◽  
Vol 4 (1) ◽  
pp. 28-42
Author(s):  
Suprianto Suprianto ◽  
Bina Andari ◽  
Yely Sulistyawati
Keyword(s):  
Production Cost ◽  
Raw Materials ◽  
Analysis Data ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Other Information ◽  
Cost Of Production ◽  
The Cost

This study aims to evaluate the calculation of cost of production. The accuracy of the calculation of cost of production is influenced by the suitability in the accumulation and calculation of production costs which includes the cost of raw materials, direct labor costs and other costs (factory overhead costs). This research was conducted at UKM UD. Usaha Baru which aims to determine the calculation of cost of production at UD. Usaha Baru and to find out whether the calculation of cost of production is in accordance with the full costing method. The technique (method) of data analysis used in this study is quantitative analysis. Data collection techniques use interview techniques directly to obtain information from the number of units of monthly production, raw material costs, direct labor costs, and factory overhead costs, as well as other information relating to the calculation of cost of production. Based on the evaluation results for the calculation of raw material costs and labor costs are in accordance with the full costing method. However, the calculation of factory overhead costs is not in accordance with the full costing method because there are costs that have not been included in the calculation of production costs.

Kheyti: Product and Business Development at an AgTech Social Enterprise

2017 ◽  
pp. 1-24
Author(s):  
Mohanbir Sawhney ◽  
Saumya
Keyword(s):  
Social Enterprise ◽  
Smallholder Farmers ◽  
Low Cost ◽  
Pilot Project ◽  
Agricultural Technology ◽  
Non Profit ◽  
Early Adopters ◽  
The Cost ◽  
Income Variability ◽  
Cash Reserves

In early 2017, after launching its successful “Greenhouse-in-a-Box” pilot project in India with fifteen smallholder farmers, Kheyti, a non-profit agricultural technology (AgTech) social enterprise, was struggling with several decisions in developing and growing its business. Kheyti was launched in 2015 to help smallholder farmers battle poverty and income variability by providing affordable technologies bundled with services. Over eighteen months, the team had developed a low-cost and modular greenhouse product to which it added financing, inputs, training, and market linkages to create a comprehensive “full-stack” solution for small farmers. The pilot project was a success in many ways, but Saumya, Kheyti's co-founder and head of product, was concerned that it revealed shortcomings that could severely affect the viability and scalability of Kheyti's solution. Saumya had some important decisions to make. Should Kheyti redesign the product from scratch, or find other ways to reduce the cost for early adopters? Should it rely on upfront revenues from sales of the greenhouse, or consider developing an innovative financing or contract farming model? Kheyti's dwindling cash reserves meant that these decisions were urgent and critical. The path chosen now would determine whether the startup would move beyond the pilot stage and achieve its vision of serving 1 million farmers by 2025.

Sign in / Sign up

Export Citation Format

Share Document