Honeycomb Multistage Control of Hydraulic Loading Testing Machine

2012 ◽  
Vol 271-272 ◽  
pp. 606-610
Author(s):  
Jun Lv
Keyword(s):  
Compressive Strength ◽  
Experimental Testing ◽  
Testing Machine ◽  
Research Priorities ◽  
Hydraulic Systems ◽  
Flexible Control ◽  
Control Programmes ◽  
High Pressure Range ◽  
The Stability ◽  
And Control

Static and dynamic characteristics of the honeycomb paperboard with different size and structure are mechanics research priorities. Study on its mechanical characteristics of the basic way is the basic mechanical properties testing by loading testing machine. In order to get the stability of compressive strength of honeycomb paperboard, compressive strength of honeycomb paperboard models should be tested. Based on the existing equipment, new equipment has been made with new hydraulic systems and control programmes, control accuracy and method has been analyzed. Experimental testing results have shown that the device is credible, and its precision meets to the design requirements. The honeycomb paperboard testing machine not only provides a high pressure range and flexible control equipment, but provides a function of testing sample size effects.

scholarly journals Data-Driven Stability Assessment of Multilayer Long Short-Term Memory Networks

2021 ◽  
Vol 11 (4) ◽  
pp. 1829
Author(s):  
Davide Grande ◽  
Catherine A. Harris ◽  
Giles Thomas ◽  
Enrico Anderlini
Keyword(s):  
Neural Network ◽  
Network Architecture ◽  
Short Term Memory ◽  
Moving Average ◽  
Machine Learning Algorithms ◽  
Physical Models ◽  
Data Driven ◽  
The Stability ◽  
And Control ◽  
Nonlinear Autoregressive

Recurrent Neural Networks (RNNs) are increasingly being used for model identification, forecasting and control. When identifying physical models with unknown mathematical knowledge of the system, Nonlinear AutoRegressive models with eXogenous inputs (NARX) or Nonlinear AutoRegressive Moving-Average models with eXogenous inputs (NARMAX) methods are typically used. In the context of data-driven control, machine learning algorithms are proven to have comparable performances to advanced control techniques, but lack the properties of the traditional stability theory. This paper illustrates a method to prove a posteriori the stability of a generic neural network, showing its application to the state-of-the-art RNN architecture. The presented method relies on identifying the poles associated with the network designed starting from the input/output data. Providing a framework to guarantee the stability of any neural network architecture combined with the generalisability properties and applicability to different fields can significantly broaden their use in dynamic systems modelling and control.

scholarly journals Mechanical Properties of the Composite Material consisting of β-TCP and Alginate-Di-Aldehyde-Gelatin Hydrogel and Its Degradation Behavior

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1303
Author(s):  
Michael Seidenstuecker ◽  
Thomas Schmeichel ◽  
Lucas Ritschl ◽  
Johannes Vinke ◽  
Pia Schilling ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Protein Concentration ◽  
Failure Load ◽  
Testing Machine ◽  
Experimental Period ◽  
Flow Chamber ◽  
Degradation Behavior ◽  
Gelatin Hydrogel ◽  
Universal Testing

This work aimed to determine the influence of two hydrogels (alginate, alginate-di-aldehyde (ADA)/gelatin) on the mechanical strength of microporous ceramics, which have been loaded with these hydrogels. For this purpose, the compressive strength was determined using a Zwick Z005 universal testing machine. In addition, the degradation behavior according to ISO EN 10993-14 in TRIS buffer pH 5.0 and pH 7.4 over 60 days was determined, and its effects on the compressive strength were investigated. The loading was carried out by means of a flow-chamber. The weight of the samples (manufacturer: Robert Mathys Foundation (RMS) and Curasan) in TRIS solutions pH 5 and pH 7 increased within 4 h (mean 48 ± 32 mg) and then remained constant over the experimental period of 60 days. The determination surface roughness showed a decrease in the value for the ceramics incubated in TRIS compared to the untreated ceramics. In addition, an increase in protein concentration in solution was determined for ADA gelatin-loaded ceramics. The macroporous Curasan ceramic exhibited a maximum failure load of 29 ± 9.0 N, whereas the value for the microporous RMS ceramic was 931 ± 223 N. Filling the RMS ceramic with ADA gelatin increased the maximum failure load to 1114 ± 300 N. The Curasan ceramics were too fragile for loading. The maximum failure load decreased for the RMS ceramics to 686.55 ± 170 N by incubation in TRIS pH 7.4 and 651 ± 287 N at pH 5.0.

scholarly journals A Novel Approach to Fabricate Foam Ceramics from Steel Slag

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Yu Zheng ◽  
Xudong Luo ◽  
Jinlong Yang ◽  
Wenlong Huo ◽  
Chi Kang
Keyword(s):  
Compressive Strength ◽  
Ph Value ◽  
Steel Slag ◽  
Raw Material ◽  
Solid Loading ◽  
Insulation Material ◽  
Ceramic Foams ◽  
Novel Approach ◽  
The Stability ◽  
First Time

A novel approach is used for fabricating steel slag foam ceramics based on the particle-stabilized foaming method. In this work, steel slag was used as the raw material and propyl gallate (PG) was used as the surface modifier. For the first time, steel slag ceramic foams were successfully fabricated based on particle-stabilized foams. The results show that the stability of the ceramic foams was closely related to the pH value and PG concentration. The porosity and compressive strength could be controlled by changing the solid loading of steel slag and sintering temperature. The porosity of steel slag foam ceramics ranged from 85.6% to 62.53%, and the compressive strength was from 1.74 MPa to 10.42 MPa. The thermal conductivity of steel slag foam ceramics was only 0.067 W (m·K)−1, which shows that it could be used as a thermal insulation material.

Basic Experimental and Numerical Investigations on Chip Pressing

2013 ◽  
Vol 554-557 ◽  
pp. 630-637 ◽  
Author(s):  
Martin Grüner ◽  
Marion Merklein
Keyword(s):  
Numerical Simulation ◽  
Aluminium Alloys ◽  
Testing Machine ◽  
Material Model ◽  
Extrusion Process ◽  
Milling Process ◽  
Numerical Investigations ◽  
Compression Direction ◽  
Universal Testing ◽  
The Stability

Aluminium alloys show a great potential for lightweight constructions due to their high strength and low density but the production of this material is very energy consuming. Also the recycling of aluminium alloys, e.g. chips from the milling process, shows different challenges. Beside contamination by cooling lubricant and oxidation of the surface of the chips the melting and rolling process for new semi finish products needs a high amount of energy. TEKKAYA shows a new approach for recycling of aluminium alloy chips by an extrusion process at elevated temperatures producing different kinds of profiles. A new idea is the production of components directly out of chips using severe plastic deformation for joining of the chips similar to the accumulative roll bonding process in sheet metal forming. In a first approach aluminium alloy chips out of a milling process were uniaxial compressed with different loads inside an axisymmetric tool installed in a universal testing machine. The compressed chip disks subsequently were tested with two experiments to gain information on their stability. First experiment is a disk compression test with the disk standing on its cylindrical surface, giving information on the stability perpendicular to the compression direction. Second experiment is a stacked disk compression test with three disks to investigate the stability parallel to compression direction. During all three tests force and displacement values are recorded by the universal testing machine. These data are also processed to calculate or identify input parameters for the numerical investigations. For numerical simulation ABAQUS in conjunction with the Drucker-Prager-Cap material model, which is often used for sintering processes, seems to be a good choice. By numerical simulation of the experiments and comparison with the experiments input parameters for the material model can be identified showing good accordance. This material model will be used in future numerical investigations of an extrusion process to identify tool geometries leading to high strains inside the material and by this to an increased stability of the parts.

The Application of the Amorphous Metal Transformers in Heavy Oil Electric Heating System

2014 ◽  
Vol 532 ◽  
pp. 191-195 ◽  
Author(s):  
Bao Jiang Sun ◽  
Lei Su ◽  
Chao Zhang
Keyword(s):  
Electric Heating ◽  
Heating System ◽  
Intermediate Frequency ◽  
Amorphous Metal ◽  
Technical Performance ◽  
Alloy Material ◽  
Working Principle ◽  
The Stability ◽  
And Control ◽  
Fast Rise

In order to solve the problem that the big loss of no-load and the fast rise of temperature when employ the conventional silicon steel metal transformer (SSMT) in the electric heating system, we choose the amorphous metal transformer (AMMT). In this paper, firstly, we give a brief introduction of the amorphous alloy material properties and compare the no-load characteristic of the AMMT with the SSMT. Secondly, the structure of intermediate frequency heating system working principle and control strategy are introduced. Finally, extensive experiments were conducted to validate the ideas. The experiments show that the AMMT not only improve the efficiency of transformer, solve the heating problem of transformer, but also improve the stability, security and other technical performance of the system, so it is worth recommending and promoting.

Dynamic and Quasi-Static Compressive Deformation Behaviour of Polyimide Foam at Various Elevated Temperature

2014 ◽  
Vol 566 ◽  
pp. 158-163 ◽  
Author(s):  
A. Yosimoto ◽  
Hidetoshi Kobayashi ◽  
Keitaro Horikawa ◽  
Keiko Watanabe ◽  
Kinya Ogawa
Keyword(s):  
Compressive Strength ◽  
Room Temperature ◽  
Deformation Behaviour ◽  
Testing Machine ◽  
Negative Temperature ◽  
Strain Rates ◽  
Compression Tests ◽  
Hopkinson Pressure Bar ◽  
Universal Testing ◽  
Pressure Bar

In order to clarify the effect of strain rate and test temperature on the compressive strength and energy absorption of polyimide foam, a series of compression tests for the polyimide foam with two different densities were carried out. By using three testing devices, i.e. universal testing machine, dropping weight machine and sprit Hopkinson pressure bar apparatus, we performed a series of compression tests at various strain rates (10-3~103s-1) and at several test temperatures in the range of room temperature to 280 ̊C. At over 100 s-1, the remarkable increase of flow stress was observed. The negative temperature dependence of strength was also observed.

THE ROLE OF ACCOUNTING AND CONTROL IN THE MANAGEMENT OF ECONOMIC SECURITY OF AN ORGANIZATION

2021 ◽  
Vol 7 (2) ◽  
pp. 165-178
Author(s):  
Nicolay T. Labyntsev ◽  
Lyubov F. SHILOVA ◽  
Ocsana V. Chukhrova
Keyword(s):  
Economic Security ◽  
Accounting Profession ◽  
Economic Management ◽  
Economic Interests ◽  
Doing Business ◽  
The Subject ◽  
The Stability ◽  
High Level ◽  
And Control

This article revises the mission and the name of the accounting profession in the context of strengthening the economic security of enterprises under the conditions of digitalization of the economy. The authors note that in the contemporary conditions of economic management, enterprises should form and ensure the functioning of the economic security of the enterprise at the proper level. The necessity of in-depth research of economic security at microlevel was considered, the factors influencing the stability of the enterprise were highlighted. High level of economic security of the subject of management consists in guaranteeing him maximum effective and stable functioning now and in future. Subjects of economic security were individual enterprises, and objects — their economic interests. The main goals of ensuring economic security of the enterprise in the part of accounting were singled out, the tasks of accounting policy, aimed at ensuring economic security, were determined. The prospects of the accounting profession in the process of ensuring economic security and reliable safe presentation of the results of doing business in reporting are substantiated. The study contains proposals on the revision of requirements for the qualifications of accountants in order to emphasize their activities aimed at strengthening the economic security of the enterprise.

Protein synthesis is required for rapid degradation of tubulin mRNA and other deflagellation-induced RNAs in Chlamydomonas reinhardi

1986 ◽  
Vol 6 (1) ◽  
pp. 54-61
Author(s):  
E J Baker ◽  
L R Keller ◽  
J A Schloss ◽  
J L Rosenbaum
Keyword(s):  
Protein Synthesis ◽  
Transcriptional Control ◽  
Protein S ◽  
Protein Synthesis Inhibitors ◽  
Control Factors ◽  
Flagellar Proteins ◽  
The Stability ◽  
And Control

After flagellar detachment in Chlamydomonas reinhardi, there is a rapid synthesis and accumulation of mRNAs for tubulin and other flagellar proteins. Maximum levels of these mRNAs (flagellar RNAs) are reached within 1 h after deflagellation, after which they are rapidly degraded to their predeflagellation levels. The degradation of alpha- and beta-tubulin RNAs was shown to be due to the shortening of their half-lives after accumulation (Baker et al., J. Cell Biol. 99:2074-2081, 1984). Deflagellation in the presence of protein synthesis inhibitors results in the accumulation of tubulin and other flagellar mRNAs by kinetics similar to those of controls. However, unlike controls, in which the accumulated mRNAs are rapidly degraded, these mRNAs are stabilized in cycloheximide. The stabilization by cycloheximide is specific for the flagellar mRNAs accumulated after deflagellation, since there is no change in the levels of flagellar mRNAs in nondeflagellated (uninduced) cells in the presence of cycloheximide. The kinetics of flagellar mRNA synthesis after deflagellation are shown to be the same in cycloheximide-treated and control cells by in vivo labeling and in vitro nuclear runoff experiments. These results show that protein synthesis is not required for the induced synthesis of flagellar mRNAs, and that all necessary transcriptional control factors are present in the cell before deflagellation, but that protein synthesis is required for the accelerated degradation of the accumulated flagellar mRNAs. Since cycloheximide prevents the induced synthesis and accumulation of flagellar proteins, it is possible that the product(s) of protein synthesis required for the accelerated decay of these mRNAs is a flagellar protein(s). The possibility that one or more flagellar proteins autoregulate the stability of the flagellar mRNAs is discussed.

Three-dimensional adaptive fixed-time guidance law against maneuvering targets with impact angle constraints and control input saturation

2021 ◽  
pp. 014233122110598
Author(s):  
Fei Ma ◽  
Yunjie Wu ◽  
Siqi Wang ◽  
Xiaofei Yang ◽  
Yueyang Hua
Keyword(s):  
Sliding Mode ◽  
Input Saturation ◽  
Three Dimensional ◽  
Fixed Time ◽  
Impact Angle ◽  
Guidance System ◽  
Control Input ◽  
Guidance Law ◽  
The Stability ◽  
And Control

This paper presents an adaptive fixed-time guidance law for the three-dimensional interception guidance problem with impact angle constraints and control input saturation against a maneuvering target. First, a coupled guidance model formulated by the relative motion equation is established. On this basis, a fixed-time disturbance observer is employed to estimate the lumped disturbances. With the help of this estimation technique, the adaptive fixed-time sliding mode guidance law is designed to accomplish accurate interception. The stability of the closed-loop guidance system is proven by the Lyapunov method. Simulation results of different scenarios are executed to validate the effectiveness and superiority of the proposed guidance law.

scholarly journals Turning Gait Planning Method for Humanoid Robots

2018 ◽  
Vol 8 (8) ◽  
pp. 1257 ◽  
Author(s):  
Tianqi Yang ◽  
Weimin Zhang ◽  
Xuechao Chen ◽  
Zhangguo Yu ◽  
Libo Meng ◽  
...  
Keyword(s):  
Inverted Pendulum ◽  
Center Of Mass ◽  
Translational Motion ◽  
Humanoid Robots ◽  
Inverted Pendulum Model ◽  
Straight Line ◽  
Pendulum Model ◽  
The Stability ◽  
And Control ◽  
Present Simulation

The most important feature of this paper is to transform the complex motion of robot turning into a simple translational motion, thus simplifying the dynamic model. Compared with the method that generates a center of mass (COM) trajectory directly by the inverted pendulum model, this method is more precise. The non-inertial reference is introduced in the turning walk. This method can translate the turning walk into a straight-line walk when the inertial forces act on the robot. The dynamics of the robot model, called linear inverted pendulum (LIP), are changed and improved dynamics are derived to make them apply to the turning walk model. Then, we expend the new LIP model and control the zero moment point (ZMP) to guarantee the stability of the unstable parts of this model in order to generate a stable COM trajectory. We present simulation results for the improved LIP dynamics and verify the stability of the robot turning.

Sign in / Sign up

Export Citation Format

Share Document