scholarly journals Design and Performance Evaluation of Energy Efficient 8-Bit ALU At Ultra Low Supply Voltages Using FinFET With 20nm Technology

2020 ◽  
Vol 14 ◽  
Keyword(s):  
Power Consumption ◽  
Performance Metrics ◽  
Full Adder ◽  
Circuit Realization ◽  
Comparative Performance ◽  
Output Resistance ◽  
Power Efficient ◽  
Minimum Power Consumption ◽  
And Performance ◽  
Power Delay Product

ince last few years, the tiny size of MOSFET, that is less than tens of nanometers, created some operational problems such as increased gate-oxide leakage, amplified junction leakage, high sub-threshold conduction, and reduced output resistance. To overcome the above challenges, FinFET has the advantages of an increase in the operating speed, reduced power consumption, decreased static leakage current is used to realize the majority of the applications by replacing MOSFET. By considering the attractive features of the FinFET, an ALU is designed as an application. In the digital processor, the arithmetic and logical operations are executed using the Arithmetic logic unit (ALU). In this paper, power efficient 8-bit ALU is designed with Full adder (FA) and multiplexers composed of Gate diffusion input (GDI) which gained designer's choice for digital combinational circuit realization at minimum power consumption. The design is simulated using Cadence virtuoso with 20nm technology. Comparative performance analysis is carried out in contrast to the other standard circuits by taking the critical performance metrics such as delay, power, and power delay product (PDP), energy-delay product (EDP) metrics into consideration.

scholarly journals Low power CMOS full adder design with body biasing approach

2011 ◽  
Vol 6 (1) ◽  
pp. 75-80
Author(s):  
Manoj Kumar ◽  
Sandeep K. Arya ◽  
Sujata Pandey
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Power Dissipation ◽  
Full Adder ◽  
Minimum Power ◽  
The Third ◽  
Body Biasing ◽  
Minimum Power Consumption ◽  
Low Power Cmos ◽  
Power Delay Product

In this paper, five different low power full adders using XOR/XNOR gates and multiplexer blocks with body biasing have been presented. In the first methodology, the adder depicts minimum power dissipation of 204.09μW and delay of 5.9849 ns. In the second, an improvement in power consumption has been reported at 128.92μW with delay of 5.9875 ns by using voltage biasing of two PMOS (P1 &P2) along with substrate biasing. In the third methodology, adder gives minimum power dissipation of 0.223nW with a delay of 5.2352 ns. Further, in fourth, it shows minimum power consumption of 0.199nW with a delay of 5.1002 ns and finally in fifth methodology, minimum power reduces to 0.192nW.Moreover, power delay product (PDP) results also have been compared for these methodologies. Comparisons have been made with earlier reported circuits and proposed circuits show better performance in terms of power consumption and delay.

scholarly journals Design and Performance Analysis of 1-Bit FinFET Full Adder Cells for Subthreshold Region at 16 nm Process Technology

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
‘Aqilah binti Abdul Tahrim ◽  
Huei Chaeng Chin ◽  
Cheng Siong Lim ◽  
Michael Loong Peng Tan
Keyword(s):  
High Speed ◽  
Average Power ◽  
Full Adder ◽  
Propagation Delay ◽  
Oxide Semiconductor ◽  
Process Technology ◽  
Subthreshold Region ◽  
And Performance ◽  
Power Delay Product ◽  
20 Nm

The scaling process of the conventional 2D-planar metal-oxide semiconductor field-effect transistor (MOSFET) is now approaching its limit as technology has reached below 20 nm process technology. A new nonplanar device architecture called FinFET was invented to overcome the problem by allowing transistors to be scaled down into sub-20 nm region. In this work, the FinFET structure is implemented in 1-bit full adder transistors to investigate its performance and energy efficiency in the subthreshold region for cell designs of Complementary MOS (CMOS), Complementary Pass-Transistor Logic (CPL), Transmission Gate (TG), and Hybrid CMOS (HCMOS). The performance of 1-bit FinFET-based full adder in 16-nm technology is benchmarked against conventional MOSFET-based full adder. The Predictive Technology Model (PTM) and Berkeley Shortchannel IGFET Model-Common Multi-Gate (BSIM-CMG) 16 nm low power libraries are used. Propagation delay, average power dissipation, power-delay-product (PDP), and energy-delay-product (EDP) are analysed based on all four types of full adder cell designs of both FETs. The 1-bit FinFET-based full adder shows a great reduction in all four metric performances. A reduction in propagation delay, PDP, and EDP is evident in the 1-bit FinFET-based full adder of CPL, giving the best overall performance due to its high-speed performance and good current driving capabilities.

A NEW ROBUST AND HIGH-PERFORMANCE HYBRID FULL ADDER CELL

2011 ◽  
Vol 20 (04) ◽  
pp. 641-655 ◽  
Author(s):  
REZA FAGHIH MIRZAEE ◽  
MOHAMMAD HOSSEIN MOAIYERI ◽  
HAMID KHORSAND ◽  
KEIVAN NAVI
Keyword(s):  
Power Consumption ◽  
Great Improvement ◽  
High Performance ◽  
Full Adder ◽  
Good Choice ◽  
Lower Power ◽  
Pvt Variations ◽  
Power Delay Product ◽  
Full Swing ◽  
Hspice Simulation

A new 1-bit hybrid Full Adder cell is presented in this paper with the aim of reaching a robust and high-performance adder structure. While most of recent Full Adders are proposed with the purpose of using fewer transistors, they suffer from some disadvantages such as output or internal non-full-swing nodes and poor driving capability. Considering these drawbacks, they might not be a good choice to operate in a practical environment. Lowering the number of transistors can inherently lead to smaller occupied area, higher speed and lower power consumption. However, other parameters, such as robustness to PVT variations and rail-to-rail operation, should also be considered. While the robustness is taken into account, HSPICE simulation demonstrates a great improvement in terms of speed and power-delay product (PDP).

scholarly journals Energy Efficient GDI Based Full Adders For Computing Applications

2020 ◽  
Vol 4 (6) ◽  
pp. 5-9
Author(s):  
Bilal N Md ◽  
Bhaskara Rao K ◽  
Mohan Das S
Keyword(s):  
Energy Consumption ◽  
Power Consumption ◽  
Energy Efficient ◽  
Supply Voltage ◽  
Logic Gates ◽  
Full Adder ◽  
Low Power Consumption ◽  
Basic Logic ◽  
Power Delay Product ◽  
Full Swing

This This paper presents energy efficient GDI based 1-bit full adder cells with low power consumption and lesser delay with full swing modified basic logic gates to have reduced Power Delay Product (PDP). The various full adders are effectively realized by means of full swing OR, AND and XOR gates with the noteworthy enhancement in their performance. The simulations for the designed circuits performed in cadence virtuoso tool with 45-nm CMOS technologies at a supply voltage of 1 Volts. The proposed 1-bit adder cells are compared with various basic adders based on speed, power consumption and energy (PDP). The proposed adder schemes with full swing basic cells achieve significant savings in terms of delay and energy consumption and which are more than 41% and 32% respectively in comparison to conventional “C-CMOS” 1-bit full adder and other existing adders.

scholarly journals Design and Implementation of Carbon Nano-tube based Full Adder at 32nm Technology for High Speed and Power Efficient Arithmetic Applications

2022 ◽  
Vol 2161 (1) ◽  
pp. 012050
Author(s):  
Imran Ahmed Khan
Keyword(s):  
High Speed ◽  
Full Adder ◽  
Logic Circuits ◽  
Power Efficient ◽  
Cmos Transistors ◽  
Bases Of Power ◽  
Ripple Carry Adder ◽  
Supply Voltages ◽  
Power Delay Product ◽  
Carbon Nano Tube

Abstract Due to physical, material, technological, power-thermal and economical difficulties, scaling of CMOS transistors will stop very soon. Due to efficiency of power and speed compared to CMOS transistors, Carbon Nano-tube transistors are best suitable element to design logic circuits. So, CNTFETS have been utilized in designing of proposed full adder (FA) and 4-bit ripple carry adder (RCA) in this paper. Proposed FA and RCA have been compared to rival designs on bases of power, speed and power-delay-product (PDP). FA and RCA circuits have been analysed with the variation of temperature from 0°C to 100°C while the variation of supply voltages is from 0.7V to 1.3V. For all temperatures and all supply voltages, proposed FA and proposed RCA have the least power consumption, shortest delay and lowest PDP. SPICE has been utilized for simulating FAs and RCAs in 32 nm process node. Even though the fabrication is complicated than CMOS counterparts but simulation results confirm usefulness of proposed FA and RCA for high speed and power efficient arithmetic applications.

A New Keeper Domino Logic Based Full Adder for High Speed Arithmetic Circuits

2020 ◽  
Vol 12 ◽  
Author(s):  
Deepika Bansal ◽  
Bal Chand Nagar ◽  
Ajay Kumar ◽  
Brahamdeo Prasad Singh
Keyword(s):  
Power Consumption ◽  
High Speed ◽  
High Efficiency ◽  
Dynamic Logic ◽  
Full Adder ◽  
Leakage Power ◽  
Low Leakage ◽  
Dynamic Circuits ◽  
Power Delay Product ◽  
Domino Circuits

Objective: A new efficient keeper circuit has been proposed in this article for achieving low leakage power consumption and to improve power delay product of the dynamic logic using carbon nanotube MOSFET. Method: As a benchmark, an one-bit adder has been designed and characterized with both technologies Si-MOSFET and CN-MOSFET using proposed and existing dynamic circuits. Furthermore, a comparison has been made to demonstrate the superiority of CN-MOSFET technology with Synopsys HSPICE tool for multiple bit adders available in the literature. Result: The simulation results show that the proposed keeper circuit provides lower static and dynamic power consumption up to 57 and 40% respectively, as compared to the domino circuits using 32nm CN-MOSFET technology provided by Stanford University. Moreover, the proposed keeper configuration provides better performance using SiMOSFET and CN-MOSFET technologies. Conclusion: A comparison of the proposed keeper with previously published designs is also given in terms of power consumption, delay and power delay product with the improvement up to 75, 18 and 50% respectively. The proposed circuit uses only two transistors, so it requires less area and gives high efficiency.

Design of low power and high speed implicit pulse flip-flop and its application

2018 ◽  
Vol 7 (3) ◽  
pp. 1893 ◽  
Author(s):  
Kuruvilla John ◽  
Vinod Kumar R S ◽  
Kumar S S
Keyword(s):  
Power Consumption ◽  
High Speed ◽  
Product Performance ◽  
Power Performance ◽  
Flip Flop ◽  
Power Efficient ◽  
Pass Transistor ◽  
Simulation Results ◽  
Power Delay Product ◽  
Pmos Transistor

In this paper, a new power efficient and high speed pulsed-triggered flip-flop in implicit style with conditional pulse enhancement and signal feed-through (CPESFTFF) is proposed. This novel architecture is presented for the pulse-triggered D-FF in the CMOS 90-nm technology. Two important features are embedded in this flip-flop architecture. Firstly, a conditional enhancement in width and height of the triggering pulses by using an additional pMOS transistor in the structure is done. Secondly, a modified signal feed-through mechanism which directly samples the input to output by using an nMOS pass transistor is introduced. The proposed design achieves better speed and power performance by successfully solving the longest discharging path problem. The simulation results show that the proposed architecture has improvement in terms of power consumption, D-to-Q delay, and Power Delay Product Performance (PDP) in comparison with other conventional P-FF architectures. A 3-bit up counter is also implemented using proposed P-FF.  

DESIGN AND ANALYSIS OF A NOVEL LOW PDP FULL ADDER CELL

2011 ◽  
Vol 20 (03) ◽  
pp. 439-445 ◽  
Author(s):  
M. H. GHADIRY ◽  
ABU KHARI A'AIN ◽  
M. NADI S.
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Performance ◽  
Full Adder ◽  
Cmos Technology ◽  
Accurate Analysis ◽  
And Performance ◽  
Full Swing ◽  
Driving Capability

This paper, presents a new full-swing low power high performance full adder circuit in CMOS technology. It benefits from a full swing XOR-XNOR module with no feedback transistors, which decreases delay and power consumption. In addition, high driving capability of COUT module and low PDP design of SUM module contribute to more PDP reduction in cascaded mode. In order to have accurate analysis, the new circuit along with several well-known full adders from literature have been modeled and compared with CADENCE. Comparison consists of power consumption, performance, PDP, and area. Results show that there are improvements in both power consumption and performance. This design trades area with low PDP.

scholarly journals Ultra high speed full adder for biomedical applications

2021 ◽  
Vol 10 (1) ◽  
pp. 25
Author(s):  
Basavoju Harish ◽  
M. S. S. Rukmini
Keyword(s):  
Power Consumption ◽  
High Speed ◽  
High Performance ◽  
Supply Voltage ◽  
Medical Engineering ◽  
Digital Signal ◽  
Full Adder ◽  
Digital Devices ◽  
Ripple Carry Adder ◽  
Power Delay Product

In the field of bio medical engineering high performance CPU for digital signal processing plays a significant role. Frequency efficient circuit is a paramount requirement for the portable digital devices employing various digital processors. In this work a novel high speed one-bit 10T full adder with complemented output was described. The circuit was constructed with XOR gates which were built using two CMOS transistors. The XOR gate was constructed using 2T multiplexer circuit style. It was observed that power consumption of the designed circuit at 180nm with supply voltage 1.8V is 183.6 uW and delay was 1.809 ps whereas power consumption at 90nm with supply voltage 1.2V is 25.74 uW and delay was 8.245 ps. The observed Power Delay Product (PDP) in 180nm (at supply voltage 1.8V) is 0.33 and in 90nm (at supply voltage 1.2V) is 0.212. The work was extended by implementing a 32-bit Ripple Carry Adder (RCA) and was found that the delay at 180nm is 93.7ps and at 90nm is 198ps. The results were drawn at 180nm and also 90nm technology using CAD tool. The results say that the present work offered significant enhancement in speed and PDP compared with existing designs.

scholarly journals Low Power and Fast Full Adder by Exploring New XOR and XNOR Gates

2021 ◽  
Vol 9 (VI) ◽  
pp. 1956-1963
Author(s):  
Madabhushi Sai Meghana
Keyword(s):  
Energy Consumption ◽  
Power Consumption ◽  
Low Power ◽  
Full Adder ◽  
Conventional Design ◽  
Innovation Model ◽  
Power Delay Product ◽  
Schematic Design

In this project, novel circuits for FULL ADDER are proposed using new XOR or XNOR gates. The conventional design of XOR or XNOR gates shows that the not gate in the schematic has drawbacks. So by investigating advanced XOR or XNOR gates we proposed the schematic design. The proposed schematics are optimized in terms of speed, delay, power and power delay product. We developed six novel hybrid full adder schematics based on exploring new XOR or XNOR gates. Each designed schematics have their specifications of energy consumption, delay, power delay product. To simulate the performance of the proposed designs, we use mentor graphics, tanner tool. The simulation yields a 45-nm CMOS innovation model that focuses on the proposed plans having best speed and power other than the plan of any full adder. The proposed Full Adders has 2-28% increment in consumption of energy and power delay product compared to other design schematics. The proposed hybrid full adders are investigated with voltage 1.8V, speed ,size of transistors, area, power consumption and delay.

Sign in / Sign up

Export Citation Format

Share Document