Structural characterization and permeability estimation for soil regions at the interface between biopore coating and soil matrix

2021 ◽  
Author(s):  
Luis Alfredo Pires Barbosa ◽  
Horst H. Gerke
Keyword(s):  
Size Distribution ◽  
Preferential Flow ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
Crack Size ◽  
Structural Features ◽  
Coating Material ◽  
Hydraulic Permeability ◽  
Soil Matrix ◽  
Earthworm Burrows

<p>During preferential flow events, soil macropores such as cracks and biopores (decayed root channels and earthworm burrows) may allow water and solutes to bypass the lower permeable soil matrix. The biopore walls are inherently compacted by the locomotion mechanism employed by earthworms and roots. In addition, there are the excretion of biopolymers and the hydrophobicity of mucilage excreted by the roots of plants or mucus by earthworms. This gives to the biopore a coating with physicochemical properties distinct from the soil matrix, such as wettability, sorption and cation exchange capacity. Consequently, changes in the mechanical properties of the material in that region are also expected, ensuring greater mechanical stability.</p><p>However, micro structural features (i.e. crack size distribution) are still poorly explored. The objective is to analyze such features in detail, in order to better understand the effects of the coating material on soil macro mechanical behaviour (i.e. tensile strength) to explain the flow exchange between biopore and the soil matrix.</p><p>Therefore, soil samples were collected from Bt horizons of two Haplic Luvisols located in northern Bohemia (Hnevceves, near Hradec Kralove, Czech Republic; 50°18′47′′ N, 15°43′03′′ E). From these air dried samples, three earthworm burrows were identified and carefully separated from soil matrix.</p><p>The samples were scanned with X-ray microtomography (X-TEk XCT 225, Nikon Metrology), using 100 keV, 120μA and no filter. The reconstruction of three-dimensional images was done with the CT Pro 3D software package (version 3.1) at a spatial resolution of 10μm and 8-bit gray scale resolution. The permeability in each region was calculated along the biopore and perpendicularly to the biopore from matrix to coating using stokes solver.</p><p>The calculated hydraulic permeability for coating and matrix was 55 and 0.4 μm<sup>2</sup> along biopore direction and 11 and 3 μm<sup>2</sup> perpendicularly to the biopore. The results from image analysis show no differences in crack size distribution between the materials, but the number of cracks and connections were superior for the coating material, suggesting that the differences in the pore structure can strongly affect the macropore-matrix mass exchange.</p>

Modelling coating cohesion effect on soil mechanical stability and permeability of the biopore - matrix interface pore region

2021 ◽  
Author(s):  
Luis Alfredo Pires Barbosa ◽  
Horst H. Gerke
Keyword(s):  
Axial Compression ◽  
Mechanical Stability ◽  
Transport Processes ◽  
Spherical Particles ◽  
External Loading ◽  
Hydraulic Permeability ◽  
Matrix Interface ◽  
Pore Region ◽  
Soil Matrix ◽  
Soil Stiffness

<p>Biopore surface is often characterized by finer particles and increased concentration of polysaccharides from root and earthworm exudates, presenting physico-chemical properties different from those of the soil matrix. Such exudates controls not only the wettability or sorption properties but also the adhesive forces of the surrounding soil particles. Thus, increased mechanical stability may be expected on biopore-matrix interface affecting preferential flow and transport processes, as well.</p> <p>However, it is still unknown (i) to what extent the particle cohesion in the coated region is able to increase the resilience of the biopore to an external loading and (ii) how it affects the permeability of the biopore-matrix pore region.</p> <p>We created a discrete element model (DEM) model of a hollow cylindrical soil sample with a coated biopore in the center (i.e., 1 cm height, 1 cm outer and 0.6 cm inner diameter). The spherical particles in the model presented diameter of 0.13 mm for the coated material and 0.22 mm for the soil matrix. The cohesion among particles in the soil matrix was set to a constant value of 10.9 MPa while the cohesion among particles in the coated region varied between 10.9 and 50.9 MPa. The sample was subjected to axial compression and the force and cracks recorded. The permeability in the radial direction from the biopore to soil matrix was calculated using ImageJ and a 3D stokes solver (FDMMS).</p> <p>The increment in the coating cohesion increased the overall soil stiffness in terms of the Young’s modulus. Before axial compression, the calculated hydraulic permeability for the interface coating and matrix was 182 μm<sup>2</sup>. After compression, although the lower coating cohesion resulted in a larger number of cracks, permeability increased with coating cohesion. This suggests that with increasing soil stiffness, the cracks decrease in number but increase in length (i.e. improved connectivity).</p>

scholarly journals Three-dimensional visualization and characterization of paper machine felts and their relationship to their properties and dewatering performance

TAPPI Journal ◽  
2021 ◽  
Vol 20 (7) ◽  
pp. 423-435
Author(s):  
CAROLINE FRISCHMON ◽  
JOHN XU ◽  
SHRI RAMASWAMY
Keyword(s):  
Size Distribution ◽  
Structural Characteristics ◽  
Three Dimensional ◽  
Structural Features ◽  
Chemical Compositions ◽  
Water Removal ◽  
Paper Machine ◽  
Machine Direction ◽  
Paper Properties ◽  
Permeability Characteristics

Polymeric felts are commonly used in the papermaking process on the paper machine wet end, in the press section, and in the dryer section. They provide an important function during paper manufacturing, including as a carrier or support; as a filter media assisting with water removal on the paper machine; in retention of fibers, fines, and fillers; and in some applications, such as tissue and towel, to impart key structural features to the web. These felts can have highly interwoven complex internal structures comprised of machine direction and cross-machine direction yarns of varying sizes and chemical compositions. Here, we present a non-intrusive three-dimensional (3D) image visualization method using advanced X-ray computed tomography (XRCT). This method was used to characterize the complex 3D felt structure and determine the water removal characteristics of some commonly used paper machine felts. The structural features analyzed include porosity; specific pore-yarn interfacial surface area; 3D pore size distribution; 3D fiber or yarn-size distribution; and their variations through the thickness direction. The top, middle, and bottom layers of the felt have very different structures to assist with water removal and impart paper properties. The size distribution of the yarns, as well as the pores in the different layers of the felt, are also inherently different. These structural features were non-intrusively quantified. In addition, variation in the structural characteristics through the thickness of the felts and its potential role in papermaking is explored. In addition to the 3D structural characteristics, permeability characteristics and water removal characteristics, including rewetting of select felt samples, have also been experimentally determined. It is interesting to observe the relationship between key structural features and permeability and water removal characteristics. These relationships can provide additional insights into press felt design, as well as ways to improve product properties and the dewatering efficiency and productivity of the paper machine.

Methods for making stereoslides and -prints, with freeze-etched olfactory epithelium as example

1984 ◽  
Vol 42 ◽  
pp. 704-705
Author(s):  
Bert Ph. M. Menco ◽  
Ido F. Menco ◽  
Frans L.T. Verdonk
Keyword(s):  
Electron Microscope ◽  
Olfactory Epithelium ◽  
Three Dimensional ◽  
Supporting Cell ◽  
Structural Features ◽  
Extensive Study ◽  
Sprague Dawley ◽  
Freezing Method ◽  
Respiratory Epithelia ◽  
Three Dimensional Presentation

Previously we presented an extensive study of the distributions of intramembranous particles of structures in apical surfaces of nasal olfactory and respiratory epithelia of the Sprague-Dawley rat. For the same structures these distributions were compared in samples which were i) chemically fixed and cryo-protected with glycerol before cryo-fixation, after excision, and ii)ultra-rapidly frozen by means of the slam-freezing method. Since a three-dimensional presentation markedly improves visualization of structural features micrographs were presented as stereopairs. Two exposures were made by tiling the sample stage of the electron microscope 6° in either direction with an eucentric goniometer. The negatives (Agfa Pan 25 Professional) were reversed with Kodak Technical Pan Film 2415 developed in D76 1:1. The prints were made from these reversed negatives. As an example tight-junctional features of an olfactory supporting cell in a region where this cell conjoined with two other cells are presented (Fig. 1).

scholarly journals Mechanical Behavior of Hydroxyapatite-Chitosan Composite: Effect of Processing Parameters

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 213
Author(s):  
Hamid Ait Said ◽  
Hassan Noukrati ◽  
Hicham Ben Youcef ◽  
Ayoub Bayoussef ◽  
Hassane Oudadesse ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Compressive Strength ◽  
Mechanical Strength ◽  
Bone Repair ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
Processing Parameters ◽  
Composite Effect ◽  
Solid Liquid ◽  
The Impact

Three-dimensional hydroxyapatite-chitosan (HA-CS) composites were formulated via solid-liquid technic and freeze-drying. The prepared composites had an apatitic nature, which was demonstrated by X-ray diffraction and Infrared spectroscopy analyses. The impact of the solid/liquid (S/L) ratio and the content and the molecular weight of the polymer on the composite mechanical strength was investigated. An increase in the S/L ratio from 0.5 to 1 resulted in an increase in the compressive strength for HA-CSL (CS low molecular weight: CSL) from 0.08 ± 0.02 to 1.95 ± 0.39 MPa and from 0.3 ± 0.06 to 2.40 ± 0.51 MPa for the HA-CSM (CS medium molecular weight: CSM). Moreover, the increase in the amount (1 to 5 wt%) and the molecular weight of the polymer increased the mechanical strength of the composite. The highest compressive strength value (up to 2.40 ± 0.51 MPa) was obtained for HA-CSM (5 wt% of CS) formulated at an S/L of 1. The dissolution tests of the HA-CS composites confirmed their cohesion and mechanical stability in an aqueous solution. Both polymer and apatite are assumed to work together, giving the synergism needed to make effective cylindrical composites, and could serve as a promising candidate for bone repair in the orthopedic field.

scholarly journals Comparative Study of Silk Fibroin-Based Hydrogels and Their Potential as Material for 3-Dimensional (3D) Printing

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3887
Author(s):  
Watcharapong Pudkon ◽  
Chavee Laomeephol ◽  
Siriporn Damrongsakkul ◽  
Sorada Kanokpanont ◽  
Juthamas Ratanavaraporn
Keyword(s):  
3D Printing ◽  
Silk Fibroin ◽  
Biomedical Applications ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
Structure Stability ◽  
3 Dimensional ◽  
Critical Technology ◽  
Box Structure ◽  
High Degree

Three-dimensional (3D) printing is regarded as a critical technology in material engineering for biomedical applications. From a previous report, silk fibroin (SF) has been used as a biomaterial for tissue engineering due to its biocompatibility, biodegradability, non-toxicity and robust mechanical properties which provide a potential as material for 3D-printing. In this study, SF-based hydrogels with different formulations and SF concentrations (1–3%wt) were prepared by natural gelation (SF/self-gelled), sodium tetradecyl sulfate-induced (SF/STS) and dimyristoyl glycerophosphorylglycerol-induced (SF/DMPG). From the results, 2%wt SF-based (2SF) hydrogels showed suitable properties for extrusion, such as storage modulus, shear-thinning behavior and degree of structure recovery. The 4-layer box structure of all 2SF-based hydrogel formulations could be printed without structural collapse. In addition, the mechanical stability of printed structures after three-step post-treatment was investigated. The printed structure of 2SF/STS and 2SF/DMPG hydrogels exhibited high stability with high degree of structure recovery as 70.4% and 53.7%, respectively, compared to 2SF/self-gelled construct as 38.9%. The 2SF/STS and 2SF/DMPG hydrogels showed a great potential to use as material for 3D-printing due to its rheological properties, printability and structure stability.

scholarly journals Direct coherent multi-ink printing of fabric supercapacitors

2021 ◽  
Vol 7 (3) ◽  
pp. eabd6978 ◽  
Author(s):  
Jingxin Zhao ◽  
Hongyu Lu ◽  
Yan Zhang ◽  
Shixiong Yu ◽  
Oleksandr I. Malyi ◽  
...  
Keyword(s):  
System Integration ◽  
High Performance ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
High Mass ◽  
Wearable Electronics ◽  
Energy Storage Devices ◽  
Fabrication Procedure ◽  
Self Powered ◽  
Mechanical Devices

Coaxial fiber-shaped supercapacitors with short charge carrier diffusion paths are highly desirable as high-performance energy storage devices for wearable electronics. However, the traditional approaches based on the multistep fabrication processes for constructing the fiber-shaped energy device still encounter persistent restrictions in fabrication procedure, scalability, and mechanical durability. To overcome this critical challenge, an all-in-one coaxial fiber-shaped asymmetric supercapacitor (FASC) device is realized by a direct coherent multi-ink writing three-dimensional printing technology via designing the internal structure of the coaxial needles and regulating the rheological property and the feed rates of the multi-ink. Benefitting from the compact coaxial structure, the FASC device delivers a superior areal energy/power density at a high mass loading, and outstanding mechanical stability. As a conceptual exhibition for system integration, the FASC device is integrated with mechanical units and pressure sensor to realize high-performance self-powered mechanical devices and monitoring systems, respectively.

scholarly journals Current Update of Collagen Nanomaterials—Fabrication, Characterisation and Its Applications: A Review

Pharmaceutics ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 316
Author(s):  
Samantha Lo ◽  
Mh Busra Fauzi
Keyword(s):  
Mechanical Stability ◽  
Health Management ◽  
Three Dimensional ◽  
Volume Ratio ◽  
Cartilage Regeneration ◽  
Nerve Tissue ◽  
Electrospinning Technique ◽  
Engineering Technology ◽  
Promising Alternative ◽  
Tissue Repair And Regeneration

Tissue engineering technology is a promising alternative approach for improvement in health management. Biomaterials play a major role, acting as a provisional bioscaffold for tissue repair and regeneration. Collagen a widely studied natural component largely present in the extracellular matrix (ECM) of the human body. It provides mechanical stability with suitable elasticity and strength to various tissues, including skin, bone, tendon, cornea and others. Even though exogenous collagen is commonly used in bioscaffolds, largely in the medical and pharmaceutical fields, nano collagen is a relatively new material involved in nanotechnology with a plethora of unexplored potential. Nano collagen is a form of collagen reduced to a nanoparticulate size, which has its advantages over the common three-dimensional (3D) collagen design, primarily due to its nano-size contributing to a higher surface area-to-volume ratio, aiding in withstanding large loads with minimal tension. It can be produced through different approaches including the electrospinning technique to produce nano collagen fibres resembling natural ECM. Nano collagen can be applied in various medical fields involving bioscaffold insertion or fillers for wound healing improvement; skin, bone, vascular grafting, nerve tissue and articular cartilage regeneration as well as aiding in drug delivery and incorporation for cosmetic purposes.

scholarly journals Agent-Based Modeling Demonstrates How Local Chemotactic Behavior Can Shape Biofilm Architecture

mSphere ◽  
2019 ◽  
Vol 4 (3) ◽  
Author(s):  
Emily G. Sweeney ◽  
Andrew Nishida ◽  
Alexandra Weston ◽  
Maria S. Bañuelos ◽  
Kristin Potter ◽  
...  
Keyword(s):  
Helicobacter Pylori ◽  
Three Dimensional ◽  
Structural Features ◽  
Agent Based Modeling ◽  
Emergent Properties ◽  
Cellular Interactions ◽  
Biofilm Growth ◽  
Content Type ◽  
Agent Based ◽  
H Pylori

ABSTRACTBacteria are often found living in aggregated multicellular communities known as biofilms. Biofilms are three-dimensional structures that confer distinct physical and biological properties to the collective of cells living within them. We used agent-based modeling to explore whether local cellular interactions were sufficient to give rise to global structural features of biofilms. Specifically, we asked whether chemorepulsion from a self-produced quorum-sensing molecule, autoinducer-2 (AI-2), was sufficient to recapitulate biofilm growth and cellular organization observed for biofilms ofHelicobacter pylori, a common bacterial resident of human stomachs. To carry out this modeling, we modified an existing platform, Individual-based Dynamics of Microbial Communities Simulator (iDynoMiCS), to incorporate three-dimensional chemotaxis, planktonic cells that could join or leave the biofilm structure, and cellular production of AI-2. We simulated biofilm growth of previously characterizedH. pyloristrains with various AI-2 production and sensing capacities. Using biologically plausible parameters, we were able to recapitulate both the variation in biofilm mass and cellular distributions observed with these strains. Specifically, the strains that were competent to chemotax away from AI-2 produced smaller and more heterogeneously spaced biofilms, whereas the AI-2 chemotaxis-defective strains produced larger and more homogeneously spaced biofilms. The model also provided new insights into the cellular demographics contributing to the biofilm patterning of each strain. Our analysis supports the idea that cellular interactions at small spatial and temporal scales are sufficient to give rise to larger-scale emergent properties of biofilms.IMPORTANCEMost bacteria exist in aggregated, three-dimensional structures called biofilms. Although biofilms play important ecological roles in natural and engineered settings, they can also pose societal problems, for example, when they grow in plumbing systems or on medical implants. Understanding the processes that promote the growth and disassembly of biofilms could lead to better strategies to manage these structures. We had previously shown thatHelicobacter pyloribacteria are repulsed by high concentrations of a self-produced molecule, AI-2, and thatH. pylorimutants deficient in AI-2 sensing form larger and more homogeneously spaced biofilms. Here, we used computer simulations of biofilm formation to show that localH. pyloribehavior of repulsion from high AI-2 could explain the overall architecture ofH. pyloribiofilms. Our findings demonstrate that it is possible to change global biofilm organization by manipulating local cell behaviors, which suggests that simple strategies targeting cells at local scales could be useful for controlling biofilms in industrial and medical settings.

scholarly journals Porous Characteristics of Three-Dimensional Disordered Graphene Networks

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 127
Author(s):  
YongChao Wang ◽  
YinBo Zhu ◽  
HengAn Wu
Keyword(s):  
Pore Size ◽  
Low Temperatures ◽  
Gas Adsorption ◽  
Three Dimensional ◽  
Md Simulations ◽  
Structural Features ◽  
Atomic Scale ◽  
Critical Factors ◽  
Chlorination Process ◽  
Porous Morphology

The porous characteristics of disordered carbons are critical factors to their performance on hydrogen storage and electrochemical capacitors. Even though the porous information can be estimated indirectly by gas adsorption experiments, it is still hard to directly characterize the porous morphology considering the complex 3D connectivity. To this end, we construct full-atom disordered graphene networks (DGNs) by mimicking the chlorination process of carbide-derived carbons using annealing-MD simulations, which could model the structure of disordered carbons at the atomic scale. The porous characteristics, including pore volume, pore size distribution (PSD), and specific surface area (SSA), were then computed from the coordinates of carbon atoms. From the evolution of structural features, pores grow dramatically during the formation of polyaromatic fragments and sequent disordered framework. Then structure is further graphitized while the PSD shows little change. For the obtained DGNs, the porosity, pore size, and SSA increase with decreasing density. Furthermore, SSA tends to saturate in the low-density range. The DGNs annealed at low temperatures exhibit larger SSA than high-temperature DGNs because of the abundant free edges.

Sign in / Sign up

Export Citation Format

Share Document