Expert System for Early Diagnosis of Tropical Malaria and Tertiana Malaria using Certainty Factor

Twano Health Center is one of the technical implementing units of the Jayapura City Health Office which organizes Health Efforts, but the constraints regarding the facilities and infrastructure of the Puskesmas are not yet adequate in supporting health services. Based on observations, the increase in the level of malaria sufferers in the Jayapura area is caused by parasites (protozoa) of the genus Plasmodium and the mode of transmission is through the bite of a female Anopheles mosquito. There are two types of malaria that are often experienced by Jayapura residents, namely Tropical Malaria (Plasmodium falciparum) and Tertiana (Plasmodium vivax). The purpose of this study is to create an expert system that can diagnose early diseases such as an expert or doctor using the Certainty Factor method which expresses belief in an event (fact or hypothesis) based on evidence or expert judgment in early diagnosis of Tropical Malaria and Tertiana. The research subjects taken were 5 patients who had symptoms of Malaria and 1 doctor to determine the symptoms of the disease) The expert system using the Certainty Factor method was used because this method was suitable in determining the disease, and the result was a percentage which was the level of accuracy in determining the patient's disease. Determination of the percentage is influenced by the MB value (a measure of the increase in confidence) and the MD value (a measure of the increase in distrust) obtained from the assessment of an expert. For data modeling using data flow diagrams (DFD) and website-based. Total accurate patient recapitulation results are 80% of the Expert System for Early Diagnosis of Tropical Malaria and Tertiana using Certainty Factor

Optimization of Hill Cipher Method for Encryption and Decryption of Prescription Drugs at Puskesmas Twano Jayapura City

A drug prescription is a written request from a doctor to a pharmacist that must be kept secret because it contains certain doses of drugs and types of drugs that cannot be known by just anyone, especially those who are not interested. From time to time technological advances have a rapid impact on all sectors, both private and government agencies, including the health sector. One form of service in the health sector that can utilize information technology is the manufacture of electronic drug prescriptions that can be sent via an application from a doctor to a pharmacist. The frequent misuse of prescription drugs by unauthorized persons, as well as errors by officers at the pharmacy in reading prescriptions can be fatal for the community, so a solution is needed to overcome this problem. This application is designed using the Hill Cipher Algorithm which is one of the classic types of algorithms in the field of cryptography, but to get the maximum level of security, the algorithm key will be modified using a postal code pattern as a matrix key. Broadly speaking, the Encryption Stage is the first starting from the plaintext which is the type of drug and drug dose, the second key matrix using a POS code pattern, the three plaintexts are converted into blocks, the fourth is arranged into a 2x2 matrix, the fifth is multiplied between the key and the sixth plaintext is multiplied into mod 26 to generate an encrypted ciphertext or recipe. The success rate of system functionality testing using the blackbox method is 100%

Webservice Learning Preparation Report Polytechnic Indonusa Surakarta

Polytechnic Indonusa Surakarta is a private university that has various study programs available. Some of the study programs must report learning preparation reports every semester which must be submitted and validated directly by Deputy Director I as an academic field. At first these activities were carried out manually and not yet computerized so as to facilitate program studies in conducting consultations and Deputy Director I who had a busy schedule but had to validate manually. This system was created with the aim of making it easier for Polytechnic Indonusa Surakarta side in collecting file, conducting consultation, signing signatures, and making learning preparation reports. Data collection methods used include the method of literature study, observation, interviews and documentation. This system will use a MySQL database with the PHP programming language with the Laravel framework. The method used in making this web service is the waterfall method. The result of the webservice learning preparation report is that the webservice system can facilitate both study programs in submitting and conducting consultations and Deputy Director I in conducting validation, consulting, and preparing learning preparation reports. This system will store data from reports that are entered into the webservice database

Cloud-computing based data integration for non-profit organization: web design and implementation

Data is a very important part of our lives nowadays, but it requires a neat and systematic acquisition. This good and systematics data acquisition also required by non-profit institutions. Non-profit institutions in Indonesia are found within various fields, including health, arts, natural environment, agriculture, etc. One of the most needed data recording is the Indonesian Red Cross (PMI). PMI is engaged in the humanitarian field and has branches throughout Indonesia, including the districts. Donor data logging is one of the problems faced by PMI. Each time a donor does a blood donation, they need to rewrite their personal data on a piece of paper. This data will then be recapitulated into a computer which sometimes takes time and is not being inputted in real time. This system requires a change that makes data able to be inputted in real time and be stored properly and neatly. The data can then be stored in the cloud as well and be accessed in real time. For non-profit organizations such as PMI, this allows inputting and data processing to become more efficient and flexible. In this study, the System Development Life Cycle (SDLC) method was used, while the website uses the CodeIgniter (CI) framework. In this research, a website application is produced with features that are in accordance with the expected needs.

Automatic Door Control System With Body Temperature Sensor

Conventional doors usually consist of a key housing and a key saddle to open it. In the current pandemic situation that has arisen due to COVID-19, so every human being is required to take precautions such as wearing a mask, keeping a distance, washing hands, not touching anything if not unnecessary. Research Methods Literature Study, Collection of supporting materials and tools, Program Design and Realization, Testing and Analysis of Program results, Making Final Report. The automatic door control system with a body temperature sensor is a prototype made to prevent the spread of COVID-19 by reducing direct physical contact that is spread through droplets attached to conventional doorknobs. Technology can be implemented in crowded areas such as shopping centers, offices, restaurants that are placed in indoor areas or indoor areas that are not exposed to direct sunlight. The components used are Arduino Uno Rev 3, Infrared Sensor, MLX90614 Temperature Sensor, 16x2 LCD, Buzzer, L298N Motor Driver, DC Motor, 12v Adapter, and LED

Communication Media Technology And Social Harmony Construction In The Era Of Society 5.0 A Critical View

Abstract—The current media communication technology is growing into an inevitability. This medium can make a world as big as an egg, and it can similarly build a harmony based on its will. The study revealed how communication media technologies are able to build a reality of harmony in society. The study employed a qualitative approach with a post-positivistic paradigm. The research took 5 informants and interviewed them. The results of the study, (1) communication media technology became the main key formed society 5.0. (2) The development of social media in various platforms and with all its advantages caused the mass media mind stream fall one by one. (3) Communication media technology into a medium can bring the far and away close, or in other words create harmony that is switched. (4) Communication media technology has an impact on the occurrence of hoaxes that are actually enemies of the state.

Prediction System for the Spread of Corona Virus in Central Java with K-Nearest Neighbor (KNN) Method

Abstract—Corona Virus is currently spreading very rapidly in many parts of Indonesia, including Central Java Province. According to the current data of corona database in Central Java, today on 17th of August 2021, the number of confirmed cases is; Confirmed in Treatment (Active Cases): 16.344, Confirmed Recovered: 408.697, and Confirmed Dead: 29.148. Therefore, the total number of cases is 454.189, obtained from the sum of the number of being treated, recovered, and dead. Corona Virus is a collection of viruses that can infect the respiratory system, generally mild, such as common cold, although, some forms of diseases like; SARS, MERS, and COVID-19 are more deadly. In anticipating this case, the government has created some policies which include; limiting activities outside the house, having school activities done from home, working from home, and even having religious activities done from home too. The purpose of this study was to predict the possible rate of new cases in one of Central Java areas with confirmed cases of corona virus. Thus, it can be used as information material for the public to anticipate early. The research method applied in this research is problem analysis and literature study, data collection and implementation. The application of the K-Nearest Neighbor (KNN) method is expected to be able to predict the level of spread of COVID-19 in Central Java. The results of the research on testing the prediction system for the new cases level were tested in the Sragen area. Testing is carried out by taking samples for new cases, namely Kudu Regency/City, Confirmed: 17,599, Treated: 89, Recovered: 18,303, Died: 1,721, Suspected: 87 and Discarded Suspected: 1,711. After doing the prediction with K-NN algorithm, it showed the Condition: High.

Kerem Quality Control Using the Quality Control Circle (QCC) Method at PT. XYZ

- The ‘kerem’ production process is the earliest process of the entire process in iron casting. The brake itself is a mandatory thing in an iron foundry company because it functions as a limiter of the inner diameter of an iron casting product or more simply as a hole in iron casting products. With the analysis carried out using seven tools, it is expected to be able to obtain actual data to improve the quality of brake production, look for factors that affect brake quality, control the number of rejects, countermeasures, repairs, and standardization. The biggest problems with defects in the production of brakes are porous, broken, cracked and not full sand. From the aspect of 4M + 1E, the Man factor is the dominant cause of brake defects. Meanwhile, the number of rejects outside the 2.5% AQL limit was 6 times, namely on 8 July 2021 as many as 16 pcs (AQL 2.5% was at 10 pcs). Then on July 17, 2021 as many as 15 pcs (2.5% AQL at 13 pcs) on July 18 2021 as many as 30 pcs (2.5% AQL at 2 pcs) on July 20 2021 as many as 25 pcs (AQL 2.5% was at 12.63) on 27 July 2021 as many as 20 pcs (AQL 2.5% was at 19 pcs) and finally on August 5, 2021 as many as 30 pcs (AQL 2.5% was at 12.6 pcs).

Waste Analysis Using Lean Manufacturing in the Film Production Process Step 2 Ulama

- The film Footsteps 2 Ulama produced by LSBO Muhammadiyah in collaboration with Ponpes Tebuireng Jombang is a semi-documentary film that tells the journey of Kyai Ahmad Dahlan and Kyai Hasyim Asy'ari. At the time of the production of the film Jejak step 2 Ulama in its implementation there were several problems such as delayed production schedules, human resources that were not as needed, scheduling errors, and also production defects in several scenes so that they had to be re-take or it could be said to be re-production to get maximum results, where these problems tend to result in waste or waste. Therefore, a study was conducted to analyze what kind of waste occurs and the most dominant using a lean approach. Based on the results of the study, it was found that waste waiting is the most dominant waste with a weight of 27.11%, then followed by waste over production and excess processing with the same weight of 20.33%, waste defect 13.55%, waste transportation 11.86%, motion 5.08% and inventory 1.69%. From the mapping using process activity mapping, a total of 32 types of activities were obtained, of which 12 were value added activities with a percentage of 50.36%, then 9 of them were necessary non-value added activities with a percentage of 13.13%, and 11 activities included in the non-value category. added with a percentage of 26.49%.

Cyber Community Towards Society 5.0 And The Future Of Social Reality

Abstract—In cyber community towards the Society 5.0 era, the use of industrial technology 4.0, especially communication media technology plays an important role. The information era causes digital communication media technology to develop very rapidly and encourage the birth of digital media that have real time capabilities and create new media. Currently mass media institutions that are not innovative are experiencing a fall. Then the existence of the construction of reality is also increasingly obscured by the mixing of life in the real world with the virtual world. Therefore, the study wants to criticize the existence of reality in the midst of the development of communication technology that is so fast. This study uses the interview method in collecting data and analyzing it using the narrative method. The results of this study are that in society 5.0 and industrial technology 4.0, a pseudo social reality constructed by communication technology media causes mass media to die, social harmony is confused and even lost, and hoaxes are attacks on harmony.technological advances in industry 5.0 increase above 70%.